Next Article in Journal
Synthesis and Characterization of Solution-Processible Donor-Acceptor Electrochromic Conjugated Copolymers Based on Quinoxalino[2′,3′:9,10]phenanthro[4,5-abc]phenazine as the Acceptor Unit
Previous Article in Journal
Study of Correlation between Structure and Shape-Memory Effect/Drug-Release Profile of Polyurethane/Hydroxyapatite Composites for Antibacterial Implants
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Gorrasi et al. Fabrication and Characterization of Electrospun Membranes Based on “Poly(ε-caprolactone)”, “Poly(3-hydroxybutyrate)” and Their Blend for Tunable Drug Delivery of Curcumin. Polymers 2020, 12, 2239

Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, SA, Italy
*
Author to whom correspondence should be addressed.
Polymers 2023, 15(4), 939; https://doi.org/10.3390/polym15040939
Submission received: 14 November 2022 / Accepted: 28 January 2023 / Published: 14 February 2023
In the original publication [1], there was a mistake in Figure 2. Figure 2b must be substituted with the following one. The correct legend appears below. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Gorrasi, G.; Longo, R.; Viscusi, G. Fabrication and Characterization of Electrospun Membranes Based on “Poly(ε-caprolactone)”, “Poly(3-hydroxybutyrate)” and Their Blend for Tunable Drug Delivery of Curcumin. Polymers 2020, 12, 2239. [Google Scholar] [CrossRef] [PubMed]
Figure 2. SEM image and fiber diameter distribution: PHB + Curc (a,d), PCL + Curc (b,e) and PCL/PHB/Curc (c,f).
Figure 2. SEM image and fiber diameter distribution: PHB + Curc (a,d), PCL + Curc (b,e) and PCL/PHB/Curc (c,f).
Polymers 15 00939 g002
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Gorrasi, G.; Longo, R.; Viscusi, G. Correction: Gorrasi et al. Fabrication and Characterization of Electrospun Membranes Based on “Poly(ε-caprolactone)”, “Poly(3-hydroxybutyrate)” and Their Blend for Tunable Drug Delivery of Curcumin. Polymers 2020, 12, 2239. Polymers 2023, 15, 939. https://doi.org/10.3390/polym15040939

AMA Style

Gorrasi G, Longo R, Viscusi G. Correction: Gorrasi et al. Fabrication and Characterization of Electrospun Membranes Based on “Poly(ε-caprolactone)”, “Poly(3-hydroxybutyrate)” and Their Blend for Tunable Drug Delivery of Curcumin. Polymers 2020, 12, 2239. Polymers. 2023; 15(4):939. https://doi.org/10.3390/polym15040939

Chicago/Turabian Style

Gorrasi, Giuliana, Raffaele Longo, and Gianluca Viscusi. 2023. "Correction: Gorrasi et al. Fabrication and Characterization of Electrospun Membranes Based on “Poly(ε-caprolactone)”, “Poly(3-hydroxybutyrate)” and Their Blend for Tunable Drug Delivery of Curcumin. Polymers 2020, 12, 2239" Polymers 15, no. 4: 939. https://doi.org/10.3390/polym15040939

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop