Next Article in Journal
Aromatic Biobased Polymeric Materials Using Plant Polyphenols as Sustainable Alternative Raw Materials: A Review
Previous Article in Journal
Study on the Effect of Electron/Hole Injection on the Energy-Storage Properties of Polymer Dielectrics
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Nimbalkar et al. A Review of Polymer Dielectrics for Redistribution Layers in Interposers and Package Substrates. Polymers 2023, 15, 3895

by
Pratik Nimbalkar
1,*,
Pragna Bhaskar
1,
Mohanalingam Kathaperumal
1,
Madhavan Swaminathan
2 and
Rao R. Tummala
1
1
3D Systems Packaging Research Center, Georgia Institute of Technology, Atlanta, GA 30332, USA
2
Department of Electrical Engineering, Pennsylvania State University, University Park, PA 16802, USA
*
Author to whom correspondence should be addressed.
Polymers 2024, 16(19), 2751; https://doi.org/10.3390/polym16192751 (registering DOI)
Submission received: 30 August 2024 / Accepted: 2 September 2024 / Published: 29 September 2024

Error in Table

In the original publication [1], there was a mistake in Table 2 as published. The values of Tensile Strength with respect to Parylene-N, Parylene-C, Parylene-D, and Parylene-HT were incorrect. The corrected Table 2 appears below. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated [1].

Reference

  1. Nimbalkar, P.; Bhaskar, P.; Kathaperumal, M.; Swaminathan, M.; Tummala, R.R. A Review of Polymer Dielectrics for Redistribution Layers in Interposers and Package Substrates. Polymers 2023, 15, 3895. [Google Scholar] [CrossRef] [PubMed]
Table 2. Survey of commercially available polymer dielectrics.
Table 2. Survey of commercially available polymer dielectrics.
PropertiesManufacturerDkDfFilm TypeElastic Modulus (GPa)CTE (ppm/K)Max. Elongation (%)Tensile Strength (MPa)Curing Temp. (°C)Glass Trans. Temp. (°C)Moisture Abs. (%)
Dielectric
ABF GX92Ajinomoto3.20.017DF (>5  μ m)5395.698180168<1
ABF GX-T31Ajinomoto3.40.014DF (>15  μ m)7.5232.4104170172<0.6
ABF GX-E4Ajinomoto3.40.0093DF (>15  μ m)13120.898-180<0.4
ABF GX-E5Ajinomoto3.30.0073DF (>15  μ m)17100.8106-212<0.4
ABF GX13Ajinomoto3.10.019DF (>15  μ m)446593-177<1.1
ABF GZ22Ajinomoto3.20.011DF (>15  μ m)6.4313.2116-192<0.6
ABF GZ41Ajinomoto3.30.0074DF (>15  μ m)9201.7120-198<0.5
ABF GY11Ajinomoto3.20.0042DF (>15  μ m)8.9263.2115-165<0.2
ALXAGC2.60.003liquid2.46030100190230<0.4
AM-270Asahi Kasei2.9-liquid2.750–6060>1203503000.6
MA-1000Asahi Kasei3.9-liquid3.630–4050>1202202401.8
BL-300Asahi Kasei3.3-liquid3.4–3.540–7050>120200–350200–2600.8
BM-300Asahi Kasei3.3-liquid4.8–5.820–6010–30>150200–350220–3900.8
I-8100Asahi Kasei3.3-liquid3.340–5050>1503502900.8
Cyclotene 4000Dow2.650.008liquid2.9421396250-<0.2
Cyclotene P6001Dow30.009liquid3.655--390-1
Cyclotene 6505Dow3.20.015liquid2.945--390-1.1
Durimide 7300Fujifilm3.2–3.3-liquid2.55585215-2851.08
Durimide 100Fujifilm3.1–3.40.006liquid3.33280260-3711.7
HD-4100HD Microsys.3.360.001liquid3.43545200375330-
HD-8820HD Microsys.2.940.0089liquid2.65266149350306<0.5
HD 8930 PBOHD Microsys.3.10.010liquid1.880801702502401.5
HD 8940 PBOHD Microsys.2.90.009liquid2.2601001702502301.5
PI-2574HD Microsys.3.30.002liquid2.4540101313003202-3
PI-2545HD Microsys.3.30.002liquid2.3131002603504003.1
PI-2611HD Microsys.2.90.002liquid8.531003503503600.5
WPR-5200JSR3.5-liquid2.5546.580200--
HC-FJSR2.490.0016liquid1.16660481851380.3
PRL-29Kayaku Adv. Mat.2.50.004liquid1.86235602002200.03
KMSF-1000Kayaku Adv. Mat.2.60.008liquid0.1414016037175570.1
KMSF-2000Kayaku Adv. Mat.2.50.003liquid1.66065602002150.03
Vecstar CTQ-50Kuraray3.30.002DF (>25  μ m)3.61530180--0.04
Vecstar CTF-50Kuraray3.30.002DF (>25  μ m)3.11840190-0.04
NC0201Namics2.50.0025DF (>5  μ m)0.8130--200185-
Parylene-NSCS2.650.0006vapor2.469<25048-160<0.1
Parylene-CSCS2.950.013vapor2.835<20069-125<0.1
Parylene-DSCS2.80.0002vapor2.638<20076-125<0.1
Parylene-HTSCS2.170.001vapor2.636<20052-377<0.01
Chemfilm TH-012Saint Gobain3.30.005DF (13  μ m)3.14085245->3802.5
NQ07XSekisui Chem.3.30.0037DF (>20  μ m)10272.6105-183-
NX04HSekisui Chem.3.30.009DF (>20  μ m)8.024.52.4100-205-
NR11Sekisui Chem.3.40.008DF (15  μ m)12.517---195-
NR50Sekisui Chem.3.30.015DF (10  μ m)5.444---194-
BL α -3700GSSumitomo Bakelite3.10.012-535----1
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Nimbalkar, P.; Bhaskar, P.; Kathaperumal, M.; Swaminathan, M.; Tummala, R.R. Correction: Nimbalkar et al. A Review of Polymer Dielectrics for Redistribution Layers in Interposers and Package Substrates. Polymers 2023, 15, 3895. Polymers 2024, 16, 2751. https://doi.org/10.3390/polym16192751

AMA Style

Nimbalkar P, Bhaskar P, Kathaperumal M, Swaminathan M, Tummala RR. Correction: Nimbalkar et al. A Review of Polymer Dielectrics for Redistribution Layers in Interposers and Package Substrates. Polymers 2023, 15, 3895. Polymers. 2024; 16(19):2751. https://doi.org/10.3390/polym16192751

Chicago/Turabian Style

Nimbalkar, Pratik, Pragna Bhaskar, Mohanalingam Kathaperumal, Madhavan Swaminathan, and Rao R. Tummala. 2024. "Correction: Nimbalkar et al. A Review of Polymer Dielectrics for Redistribution Layers in Interposers and Package Substrates. Polymers 2023, 15, 3895" Polymers 16, no. 19: 2751. https://doi.org/10.3390/polym16192751

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop