The Effect of an Anionic Polyacrylamide on the Flotation of Chalcopyrite, Enargite, and Bornite

Water recycling in mining is essential to decrease water usage, which results in the accumulation of high concentrations of inorganic and organic substances in the process water. Consequently, adverse impacts on the flotation process of copper sulfides may arise. High-molecular-weight polymers based on anionic polyacrylamides (PAMs) are used as tailing flocculants in mineral processing plants. The recirculation of water recovered from the tailing thickeners to the flotation process introduces residual PAMs, which can impact the flotation of important copper sulfides like chalcopyrite, bornite, and enargite. This issue has been rarely studied. In this work, results on the effect of an anionic polyacrylamide (PAM) of medium–low anionicity on the flotation of chalcopyrite, enargite, and bornite are reported and analyzed. The results show that PAM molecules depress the flotation of chalcopyrite, enargite, and bornite under a wide range of pH values. The experimental data indicate that the depressing effect of PAMs on copper sulfides increases with pH. The zeta potential results reveal that this parameter becomes less negative with the addition of PAMs, indicating interactions between PAM molecules and the surfaces of the copper sulfides. PAM adsorption on copper sulfides increases with pH, which correlates with the flotation and zeta potential data. It is proposed that the interactions between PAM molecules and copper sulfides are explained by the presence of surface iron and copper hydroxides that create chemically active adsorption sites.