Next Article in Journal
Cathodic and Anodic Stress Corrosion Cracking of a New High-Strength CrNiMnMoN Austenitic Stainless Steel
Next Article in Special Issue
Analysis of the Process Parameters, Post-Weld Heat Treatment and Peening Effects on Microstructure and Mechanical Performance of Ti–Al Dissimilar Laser Weldings
Previous Article in Journal
Design Optimization of a Single-Strand Tundish Based on CFD-Taguchi-Grey Relational Analysis Combined Method
Previous Article in Special Issue
Influence of Specific Energy on Microstructure and Properties of Laser Cladded FeCoCrNi High Entropy Alloy
 
 
Article

Article Versions Notes

Metals 2020, 10(11), 1540; https://doi.org/10.3390/met10111540
Action Date Notes Link
article pdf uploaded. 19 November 2020 12:55 CET Version of Record https://www.mdpi.com/2075-4701/10/11/1540/pdf-vor
article xml file uploaded 20 November 2020 12:10 CET Original file -
article xml uploaded. 20 November 2020 12:10 CET Update -
article pdf uploaded. 20 November 2020 12:10 CET Updated version of record https://www.mdpi.com/2075-4701/10/11/1540/pdf-vor
article html file updated 20 November 2020 12:12 CET Original file -
article xml file uploaded 24 November 2020 10:13 CET Update -
article xml uploaded. 24 November 2020 10:13 CET Update https://www.mdpi.com/2075-4701/10/11/1540/xml
article pdf uploaded. 24 November 2020 10:13 CET Updated version of record https://www.mdpi.com/2075-4701/10/11/1540/pdf
article html file updated 24 November 2020 10:15 CET Update -
article html file updated 23 July 2022 01:44 CEST Update https://www.mdpi.com/2075-4701/10/11/1540/html
Back to TopTop