Improvement of Filler Wire Dilution Using External Oscillating Magnetic Field at Full Penetration Hybrid Laser-Arc Welding of Thick Materials
Abstract
:1. Introduction
2. Electromagnetic Weld Pool Influence
3. Experimental Setup
4. Results and Discussion
5. Conclusions
Author Contributions
Funding
Acknowledgments
Conflicts of Interest
References
- Eboo, M.; Steen, W.M.; Clarck, J. Arc augmented laser processing of materials. In Proceedings of the International Conference of Advances in Welding Processes, Harrogate, UK, 9–11 May 1978. [Google Scholar]
- Roland, F.; Manzon, L.; Kujala, P.; Brede, M.; Weitzenböck, J. Advanced joining techniques in European shipbuilding. J. Ship Prod. 2004, 20, 200–210. [Google Scholar]
- Gumenyuk, A.; Rethmeier, M. Developments in hybrid laser-arc welding technology. In Handbook of Laser Welding Technologies; Katayama, S., Ed.; Woodhead Publishing Ltd.: Cambridge, UK, 2013; pp. 505–521. [Google Scholar]
- Bachmann, M.; Gumenyuk, A.; Rethmeier, M. Welding with high-power lasers: trends and developments. Phys. Procedia 2016, 83, 15–25. [Google Scholar] [CrossRef]
- Üstündag, Ö.; Avilov, V.; Gumenyuk, A.; Rethmeier, M. Full penetration hybrid laser arc welding of up to 28 mm thick S355 plates using electromagnetic weld pool support. J. Phys. Conf. Ser. 2018, 1109, 12–15. [Google Scholar] [CrossRef]
- Wahba, M.; Mizutani, M.; Katayama, S. Single pass hybrid laser-arc welding of 25 mm thick square groove butt joints. Mater. Des. 2016, 97, 1–6. [Google Scholar] [CrossRef]
- Rethmeier, M.; Gook, S.; Lammers, M.; Gumenyuk, A. Laser-hybrid welding of thick plates up to 32 mm using a 20 kW fibre laser. J. Jpn. Weld. Soc. 2009, 27, 74–79. [Google Scholar] [CrossRef]
- Katayama, S.; Yohei, A.; Mizutani, M.; Kawahito, Y. Development of deep penetration welding technology with high brightness laser under vacuum. Phys. Procedia 2011, 12, 75–80. [Google Scholar] [CrossRef]
- Reisgen, U.; Olschok, S.; Longerich, S. Laser Beam Welding in Vacuum—A Process Variation in Comparison with Electron Beam Welding. In Proceedings of the 29th International Congress on Applications of Lasers & Electro-Optics ICALEO 2010, Anaheim, CA, USA, 26–30 September 2010; pp. 637–638. [Google Scholar]
- Reisgen, U.; Olschok, S.; Jakobs, S. Laser submerged arc welding (LUPuS) with solid state lasers. Phys. Procedia 2016, 56, 653–662. [Google Scholar] [CrossRef]
- Zhang, C.; Li, G.; Gao, M.; Zeng, X. Microstructure and mechanical properties of narrow gap laser-arc hybrid welded 40 mm thick mild steel. Materials 2017, 10, 106. [Google Scholar] [CrossRef]
- Avilov, V.; Gumenyuk, A.; Lammers, M.; Rethmeier, M. PA position full penetration high power laser beam welding up to 30 mm thick AlMg3 plates using electromagnetic weld pool support. Sci. Technol. Weld. Joining 2012, 17, 128–133. [Google Scholar] [CrossRef]
- Gook, S.; Gumenyuk, A.; Rethmeier, M. Hybrid laser arc welding of X80 and X120 steel grade. Sci. Technol. Weld. Joining 2014, 19, 15–24. [Google Scholar] [CrossRef]
- Schaefer, M.; Kessler, S.; Fetzer, F.; Graf, T. Influence of the focal position on the melt flow during laser welding of steel. J. Laser Appl. 2017, 29, 012010. [Google Scholar] [CrossRef] [Green Version]
- Karhu, M.; Kujanpaa, V.; Gumenyuk, A.; Lammers, M. Study of filler metal mixing and its implication on weld homogeneity of laser-hybrid and laser cold-wire welded thick austenitic stainless steel joints. In Proceedings of the International Congress on Applications of Lasers & Electro-Optics 2013, Miami, FL, USA, 6–10 October 2013; pp. 252–261. [Google Scholar]
- Sohail, M.; Karhu, M.; Na, S.J.; Han, S.W.; Kujanpaa, V. Effect of leading and trailing torch configuration on mixing and fluid behavior of laser-gas metal arc hybrid welding. J. Laser Appl. 2017, 29, 042009. [Google Scholar]
- Zhao, L.; Sugino, T.; Arakane, G.; Tsukamoto, S. Influence of welding parameters on distribution of wire feeding elements in CO2 laser GMA hybrid welding. Sci. Technol. Weld. Joining 2009, 14, 457–467. [Google Scholar] [CrossRef]
- Bachmann, M.; Avilov, V.; Gumenyuk, A.; Rethmeier, M. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel. J. Mater. Process. Technol. 2014, 214, 578–591. [Google Scholar] [CrossRef]
- Bakir, N.; Artinov, A.; Gumenyuk, A.; Bachmann, M.; Rethmeier, M. Numerical simulation on the origin of solidification cracking in laser welded thick-walled structures. Metals 2018, 8, 406. [Google Scholar] [CrossRef]
- Rethmeier, M.; Gook, S.; Gumenyuk, A. Einsatz des Laserstrahl-MSG-Hybridschweißverfahrens an längsnahtgeschweißten Großrohren der Güte API-X80/-X100 zur Steigerung der Zähigkeit und Erhöhung der Wirtschaftlichkeit. In FOSTA Bericht P822; Forschungsvereinigung Stahlanwendung e.V.: Düsseldorf, Germany, 2012. [Google Scholar]
- Gatzen, M.; Tang, Z.; Vollertsen, F. Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire. Phys. Procedia 2011, 12, 56–65. [Google Scholar] [CrossRef]
- Tang, Z.; Gatzen, M. Influence on the dilution by laser welding of aluminum with magnetic stirring. Phys. Procedia 2010, 5, 125–137. [Google Scholar] [CrossRef] [Green Version]
- Vollertsen, F.; Thomy, C. Magnetic stirring during laser welding of aluminum. J. Laser Appl. 2006, 18, 28–34. [Google Scholar] [CrossRef]
- Üstündağ, Ö.; Fritzsche, A.; Avilov, V.; Gumenyuk, A.; Rethmeier, M. Hybrid laser-arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support. Weld. World 2018, 62, 767–774. [Google Scholar] [CrossRef]
- Landau, L.D.; Lifshitz, E.M. Course of Theoretical Physics. In Electrodynamics of Continuous Media; Butterworth-Heinemann: Oxford, UK, 1984. [Google Scholar]
Material/Element | C | Si | Mn | P | S | Cr | Ni | Mo | Cu | Nb | Fe |
S355J2 1 | 0.08 | 0.29 | 1.3 | 0.019 | 0.004 | - | - | - | 0.008 | - | bal. |
E Ni 6625 2 (NiCr22Mo9Nb) | <0.04 | <0.7 | <1 | - | - | 21.5 | bal. | 9 | - | 3.3 | <2 |
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Share and Cite
Üstündağ, Ö.; Avilov, V.; Gumenyuk, A.; Rethmeier, M. Improvement of Filler Wire Dilution Using External Oscillating Magnetic Field at Full Penetration Hybrid Laser-Arc Welding of Thick Materials. Metals 2019, 9, 594. https://doi.org/10.3390/met9050594
Üstündağ Ö, Avilov V, Gumenyuk A, Rethmeier M. Improvement of Filler Wire Dilution Using External Oscillating Magnetic Field at Full Penetration Hybrid Laser-Arc Welding of Thick Materials. Metals. 2019; 9(5):594. https://doi.org/10.3390/met9050594
Chicago/Turabian StyleÜstündağ, Ömer, Vjaceslav Avilov, Andrey Gumenyuk, and Michael Rethmeier. 2019. "Improvement of Filler Wire Dilution Using External Oscillating Magnetic Field at Full Penetration Hybrid Laser-Arc Welding of Thick Materials" Metals 9, no. 5: 594. https://doi.org/10.3390/met9050594