1. Introduction
The Green Revolution of the 1960s led to a notable acceleration in grain production in developing countries, mainly due to the development of high-yielding hybrid strains of rice (
Oryza sativa L.), wheat and maize, and the introduction of chemical fertilizers, pesticides and irrigation. However, because of their genetic homogeneity, the cultivars were more susceptible to pests, weeds and diseases than the traditional varieties. Approximately half of the world population uses rice as a staple food. Pests are the main culprits for the rice productivity reduction. White backed planthopper (WBPH;
Sogatella furcifera Horváth) and brown planthopper (
Nilaparvata lugens Stal, BPH) are among the major pests causing the greatest damage to rice crops worldwide. Both the pests transmitting southern rice black-streaked dwarf virus (SRBSDV), but WBPH is a strong persistent-transmitting vector for SRBSDV. In the near past, SRBSDV was discovered in Guangdong province China and rapidly spread in Southern China and Vietnam [
1,
2]. SRBSDV belongs to the Fijivirus genus which also includes
Oat Sterile Dwarf Virus (OSDV),
Garlic Dwarf Virus (GDV),
Fiji Disease Virus (FDV),
Mal de Rio Cuarto virus (MRCV),
Maize rough dwarf virus (MRDV),
Pangola stunt virus (PaSV) and
Nilaparvata lugens reovirus (NLRV). These are all viruses that propagate in vivo through a hopper vector in a sophisticated way except GDV whose vector is still unknown [
3].
A distinctive feature of plants and other sessile organisms, which cannot run away in case of hazard and lack an immune system to contest pathogens, is their capacity to produce a massive variety of compounds, the so-called secondary metabolites [
4]. The biosynthesis of numerous secondary metabolites is constitutive, whereas in various plants it can be induced and enhanced by biological stress conditions, such as wounding or infection [
5]. Over 2000 plant species are known to have pesticidal properties, and many of these plants are used by farmers in developing countries [
6,
7]. However, it is assessed that only 20–30% of higher plants have been studied so far [
4]. Only a small percentage of plants has been screened for pesticidal activity, and, in addition, many such studies are not complete and often bioassay procedures used have been insufficient or inappropriate [
8,
9]. The plant kingdom represents a huge pool of new molecules to be discovered; as potentially useful biological compounds remain undiscovered, unexplored, undeveloped or underutilized from this reservoir of plant material [
10,
11]. To properly investigate the new compound, require separation techniques, structural elucidation and bioassay.
Because plants are sessile organisms that cannot move they face a variety of stress conditions during their growing life. Moreover, in order to survive this stress condition, numerous changes occurring in the growth stage and numerous mechanisms that can grow and develop by resisting stress have evolved [
12]. Plant secondary metabolites are derivatives of primary metabolites made directly from plants due to a variety of physiological changes [
13]. In addition, secondary metabolites play a key role in plant growth and survival under stress conditions and have a long-term effect [
14]. In plants, about 100,000 secondary metabolites exist in three main groups [
15]. In particular, plants synthesize aromatic amino acids such as tryptophan, phenylalanine and tyrosine, which are aromatic amino acids through the shikimate pathway. Aromatic amino acids are precursors to secondary metabolites that play a critical role in plant growth, development and defense reactions. In addition, chorismate, a precursor of aromatic amino acids, is used as a precursor of salicylic acid, a representative plant defense material.
QTL is a technique that is effectively used to analyze the relationship between phenotype and genotype [
16]. So far, resistance genes and major QTLs that can be usefully used in agriculture have been reported [
17]. However, these QTLs only use phenotype data, and studies that map using the concentrations of secondary metabolites and compounds that actually occur in cells are rare.
The accumulation of our novel compound is still unknown that whether it accumulated due to the viral (SRBSDV) infection or due to the WBPH wound. However, theoretically we can say that there is a close relationship between cq-9 and virus infection. Furthermore, cochlioquinone has leishmanicidal properties that can inhibit malaria-causing protozoan growth [
18]. Due to the compound’s novelty and structural similarity, our study aimed at that along with WBPH resistance activity
Mostly, significant secondary metabolite synthesis in plants usually begins with the shikimic acid pathway, a complex metabolic pathway used by bacteria, fungi, algae, parasites and plants for the biosynthesis of aromatic amino acids. In animals and humans, this pathway is not found, so the essential aromatic amino acids must be obtained from plants or other organisms. The secondary metabolites are glycosides, alkaloids, carbohydrate, proteins, lipids, tannins, flavonoids, terpenoids, steroids, polyphenols, phytosterols, resins, glycoalkaloids, etc. and humans use them pharmaceutically. Human chronic diseases include cardiovascular diseases, diabetes, cancer and neurodegenerative and age-related diseases, and sepsis. Studies have suggested that isothiocyanates, catechin, quercetin, anthocyanidins, proanthocyanidins, lycopene, lutein and zeaxanthin are protective against various types of cancers [
19]. Innovation of new drugs against these diseases is a crucial need, and natural sources such as plants with their tremendously diverse secondary metabolites may play an important role.
We have investigated a novel compound (cq-9) quite similar to cochlioquinone accumulated during WBPH stress condition through QTLs analysis. In this research, both phenotype data and secondary metabolite concentrations were used for QTL mapping; although it may be phenotypically resistant, but not in cell. The QTL mapping was analyzed using the concentration of resistant substances actually produced in cells, and the common region of QTLs using phenotype data and secondary metabolites was utilized. In addition, we analyzed whether the secondary metabolites produced by plants to resist viruses could be used in animals. It is still unknown whether the accumulation of our novel compound is due to viral (SRBSDV) infection or due to the WBPH wound. However, theoretically we can say that there is a close relationship between cq-9 and virus infection. On the basis of quinone and catechol being present in the cochlioquinone skeleton (similar in cq-9), it is predicted that it will be affective in treatment of cancer and sepsis diseases. Moreover, quinone greatly inhibits doxorubicin-resistant human breast cancer MCF-7/DOX cell proliferation and catechol inhibits lung cancer [
20]. Furthermore, cochlioquinone has leishmanicidal properties and can also inhibit malarial causing protozoan growth [
18]. Due to the compound novelty and structural similarity our study aimed that along with WBPH resistance activity, cochlioquinone could be possibly involved in anticancer and anti-sepsis activity.
2. Materials and Methods
2.1. Plant Materials
The Cheongcheong/Nagdong double haploid (CNDH) lines used for constructing the genetic map were obtained by in vitro anther culture of the F
1 plants derived from crossing Cheongcheong (WBPH-resistant) and Nagdong (WBPH-susceptible) at Kyungpook National University. Cheongcheong is indica type rice cultivar with high yield and a complete abscission layer originating from
O. nivara. Nagdong is a leading cultivar in the regional area with a partial abscission layer on the pedicel tissues and has been planted for over 20 years. The CNDH lines were cultivated in a paddy field 3 years after it was developed in 2010. For the anther culture, anthers were cultured through a two-step method [
21]. In order to distinguish the resistance and susceptibility of the CNDH lines to WBPH, and 14 days after seeding, the WBPH was treated and the phenotypes were compared. When treated with WBPH, resistant lines showed green leaves, but susceptible lines had dried leaves. The resistance score was assigned to the CNDH lines through the comparison of phenotypes after treatment with WBPH. The phenotypes of the 120 CNDH lines were screened for WBPH resistance using the standard evaluation system of WBPH damage to rice.
2.2. WBPH and Rearing
The insectarium room was maintained at 27 ± 1 °C and 60–70% relative humidity with light illumination for 16 h/day. Thirty insects were placed in six bins every at preservation area until oviposition occurred [
22], at which stage, they were transferred to 12 cages for selection of 2nd and 3rd instars. For breeding, the 2nd and 3rd instars WBPH were selected and transferred to the rice seedling, which had been prepared in mass plastic cages, to produce the next generation homogeneously. The WBPH could redistribute themselves onto the fresh plants. At 9–10 days post oviposition, the 1
st instar hatched from the egg, and after 14 days, the 2nd and 3rd instar nymphs were selected to infest the seedling stage.
2.3. QTL Analysis
The chromosomal locations of the QTL were resolved by composite interval mapping (CIM) of the genetic and bioinformatic data using Windows QTL Cartographer 2.5 [
23]. We used a candidate gene map of the 120 CNDH lines with a set of resistance-related candidate gene markers (217 markers loci). The main window of Windows QTL Cartographer 2.5 lets in motion between open files, manipulate of evaluation parameters and display of chromosome graphics. Display parameters were set to show the LOD profile as a block sketch view, and the ratio between the effect on window measurement and LOD window size. QTL mapping was analyzed using the data collected from 2016 to 2020. First, we checked if the polymorphic markers in Cheongcheong and Nagdong were using 423 SSR markers for high-density mapping of the CNDH lines. Of these, 222 (52%) SSR markers were polymorphic. The total length of the related maps is 2121.7 cM and the average distance between SSR markers is 10.6 cM. The QTL was analyzed by the method of Composite Interval Mapping (CIM) of Win QTL cart 2.5, using the resistant score and concentration data and genotype information of the WBPH resistance substance in the CNDH lines.
2.4. Extraction of Compounds in Rice
A 500 g sample of the leaves was ground in liquid nitrogen, and then 500 mL of 70% methanol was added, and the mixture was shaken overnight at room temperature. The crude extract was filtered through filter paper. The pellet was washed with 500 mL of 70% methanol and shaken overnight at room temperature. Both supernatants were pooled into a separation tube and washed with hexane:chloroform (1:1 v/v) three times. The supernatant was collected into an evaporation tube and concentrated on a rotary evaporator. The residue (brown color) was blended with silica gel 60 (70–230 mesh), and 25 g of the silica gel was packed into a glass column (2.5 cm in diameter). The eluent was collected into glass tubes (5 mL/tube) and dried using a heating block at 50 °C.
2.5. Purity Assessment of cq-9 by Thin Layer Chromatography
In the methanol extract of rice, cq-9 was accurately separated by TLC (Thin Layer Chromatography). One microliter of methanol extract at 10 mg/mL was loaded on a TLC plate (60 F254 plates, Merck, KGaA, Darmstadt, Germany), and the developed solvent was mixed with chloroform, methanol, butanol and DW at a ratio of 4:5:6:2 was developed. The developed TLC plate confirmed the spot at 254 nm, which is a short wavelength, and 365 nm, which is a long wavelength of the UV lamp. In response to WBPH, we identified cq-9 as a new compound and were patent in USA under the patent number US 10,562,911_B2.
2.6. HPLC Determination of cq-9
For HPLC profiling, SMs were extracted from cells, as well as from liquid medium in which the cells were grown, using methanol. The cells were separated from the medium by centrifugation and then mixed with 20% methanol and sonicated, while the liquid fraction was mixed with 20% methanol without sonication. After centrifugation, the supernatant was collected and washed with an equal volume of n-butanol, which was then evaporated on a rotary evaporator. The TLC sample previously diluted in methanol was separated by reverse-phase HPLC into peak (retention time = 8 s), using a waters HPLC system (consisting of a 1525 pump, 2487 detector and 717 Plus autosampler), equipped with a Zorbax column (4.6 × 250 × 10 mm, particle size 5 mm; Agilent). Acetonitrile and 1% acetic acid were used as the mobile phase at a flow of 1 mL/min for 50 min. Detection was by UV at 250 nm.
2.7. Confirmation of Molecular Weight and Chemical Structure of cq-9 through LC/MS
We used LC/MS to analyze the materials, with an MSQ Plus Single Quadrupole Mass Spectrometer (Thermo Fisher Scientific, San Diego, CAWaltham, MA, USA). The infusion concentration was a 1:1000 sample dilution using 50% methanol in 0.1% formic acid and the flow rate was 50 µL/min.
2.8. Isolation of RNA and Construction of cDNA Library
Total RNA samples were isolated from leaves harvested 14 days after planting. The standard protocol and chemicals supplied with the QIAprep Spin Miniprep kit (QIAGEN, Cat. 27106, Hilden, Germany) were used. The cDNA was synthesized using a qPCRBio cDNA Synthesis kit (PCR Biosystems, Cat. PB30.11.10, Wayne, PA, USA) based on the manufacturer’s instructions. Specific primers (forward: 5’-ATGGCGGCGGCGATGATTCTCTCCTGCA-3’; reverse: 5’-TCAGGCATTGCAAGTTCGAATCCTA ACAAG-3’) for the ORF with BamH1 and XhO1 restriction sites were designed for the PCR. PCR was performed with Pfu high-fidelity polymerase enzyme (Bioneer, Cat. K-2301, Daedeok, Daejeon, Korea) in a total volume of 50 µL. The following PCR conditions were used: initial denaturation at 94 °C for 5 min, followed by 40 cycles of denaturation at 94 °C for 30 s, annealing at 58 °C for 30 s, and extension at 72 °C for 1 min; and a final extension at 72 °C for 5 min. The amplicons were then purified from 1% agarose gel.
2.9. Bacteria, Yeast Strains and Media
The strains
E. coli DH5α and
S. cerevisiae D452-2 were used in this experiment. The yeast episomal plasmids pRS42k, PGK1p and CYC1t were used in both
E. coli and
S. cerevisiae. YPD medium (1% yeast extract, 2% peptone, 2% glucose) was used as the basal medium for the routine growth of yeast, as described previously [
24]. After autoclaving and cooling the solid and liquid media until 45°C, geneticin (G418) and spectinomycin (Invitrogen, Cat. 11860038, Waltham, MA, USA) were used at 150 mg/L for selection [
25].
2.10. Cloning and Vector Construction
The construct used for transforming the yeast was prepared in three steps: insert preparation, vector construction and ligation. To insert the amplified gene, as previously described, the insert was purified after gel electrophoresis using a QIAquick Gel Extraction kit (QIAGEN, Cat. 28706X4, Hilden, Germany). The purified insert (2 µg) was treated with
BamH1 (New England BioLabs, Cat. R3136S, Ipswich, MA, USA) and
Xho1 (New England BioLabs, Cat. R0146S, Ipswich, MA, USA) restriction enzymes (2 µL each) with Cutsmart buffer (4 µL) (New England BioLabs, Cat. B7204S, Ipswich, MA, USA) and incubated at 37 °C for 4 h. To digest methylated DNA, 2 µL of
Dpn1 enzyme was added to the restriction digest, which was then incubated at 37 °C for 2 h. Additionally, the pRSk42 vector (3 µg) was also treated with
BamH1 and
Xho1 enzymes (2 µL each) by incubating at 37 °C for 4 h. After cutting with the restriction enzymes, the vector was then treated with CIP (New England BioLabs, CatM0525S, Ipswich, MA, USA) to dephosphorylate the ends of the vector. Finally, the insert was ligated to the vector at an insert:vector ratio of 5:1 in the presence of Quick Ligase and 2× Quick Ligase Reaction buffer (New England BioLabs, B6058S, Ipswich, MA, USA). This construct was then transformed and propagated in
E. coli JM109 cells. The plasmid used in this experiment was pRS42k, which derives from the pRS series of yeast episomal plasmids and acts as a shuttle vector between yeast and
E. coli. Usually, pRS42k is not used for gene expression as it has no promoter and terminator sequences. To construct this plasmid as the expression vector pRS42k-PGK1p, we performed the following steps: the PGK1 promoter and CYC1 terminator site, along with the
OsCM gene (Accession No. XM_015793648.2), were inserted into the pRS42K plasmid, as presented in 5 kb with the appropriate restriction sites. The restriction enzymes
Kpn1 and
Sac1 were used for the insertion of the whole fragment (promoter + gene + terminator). This plasmid backbone is mostly used as an expression vector in yeast because it can be easily manipulated to introduce foreign DNA into yeast. It is an independent and high copy number replicating plasmid containing the 2µ circle cloned at one of the 2µ circle
EcoRI sites [
26,
27]. The 2µ circle fragment allows for the efficient replication of the plasmid in yeast [
26]. It has been reported that the 2µ circle is present in almost all strains of
S. cerevisiae at 50–100 copies per haploid cell [
28,
29]. The replication of pRS42k in bacteria, as well as in yeast, eases the isolation of specific genes of interest. Here, we propagated our gene of interest in
E. coli and then used yeast for functional expression experiments. Due to the presence of the 2µ circle, the pRS42k plasmid can be efficiently transformed into yeast by the lithium acetate/single-stranded carrier DNA/polyethylene glycol (PEG) method [
29], with slight changes. The colonies were grown for 6 days until the growth rate decreased, thereby showing a dependency on the substrate [
30]. Often, yeast transformants may be affected by the structural instability of the vector due to a large foreign gene, which could be a reason for its decreased replication rate. Furthermore, episomal vectors are known to be structurally unstable when they contain a large foreign gene [
31].
2.11. Transformation to Yeast
Saccharomyces cerevisiae was used in this study as a host for the recombinant protein, and the transformation was carried out with the lithium acetate (LiAc)/single-stranded carrier DNA/PEG method [
29]. The yeast strain was grown in 10 mL of YPD medium at 30 °C overnight and then shaken at 200 rpm in a 250 mL YPD culture flask. After 12–14 h of incubation, the titer of the culture was determined by adding 10 µL of cells into 1 mL of water in a spectrophotometer cuvette to be read at 600 nm. Then, 2.5 × 10
8 cells were added to 50 mL of prewarmed YPD into a pre-warmed flask to give a titer of 5 × 10
6. The flask was incubated at 30 °C and 200 rpm for about 4 h. The cells were harvested and washed in 30 mL of water twice before finally resuspending in 1 mL of water by vortex. At the same time, the single-stranded carrier DNA solution (salmon sperm DNA; Sigma Chemical Co., D-1626, Saint Louis, MO, USA) was incubated in a boiling water bath for 5 min for denaturation and chilled on ice immediately. Next, 50% (
w/v) PEG and 1.0 M LiAC were prepared accordingly, and then 360 µL of the transformation mix (35 µL plasmid, 36 µL LiAC, 240 µL PEG and 50 µL of the single-stranded carrier DNA) was added to 100 µL of competent yeast cells and vigorously vortexed. The cells were incubated at 42 °C for 40 min in a water bath and then harvested by centrifugation for 30 s at full speed. The supernatant was removed, the cells were resuspended in 1 mL of distilled water, and 40 µL of the cell mixture was plated in each selection medium. The transformants were enumerated after incubating the plates at 30 °C for 3 days.
2.12. Plasmid Isolation and PCR Amplification
After confirming the transformation by colony PCR, the respective colonies were used to inoculate 5 mL of liquid YPD media for overnight growth at 30 °C and 200 rpm. RNA was isolated using the RNeasy Plant Mini kit (QIAGEN, Cat. 74904, Hilden, Germany). The concentration of RNA was quantified using a NanoDrop 2000 spectrophotometer (Thermo Scientific, ND-2000, Waltham, MA, USA). The cDNA library was synthesized with the qPCRBio cDNA Synthesis kit (SuperScript IV One-Step RT-PCR System, Thermo Fisher, Cat. 12594025, Waltham, MA, USA) using 3 µL of the RNA sample and 1 µL of the primer (100 pmol). A simple PCR was performed in a volume of 20 µL under the following conditions: 94 °C for 5 min; followed by 30 cycles at 94 °C for 30 s, 58 °C for 30 s and extension at 72 °C for 1 min; and final extension at 72 °C for 5 min. The amplicons were analyzed on a 1% agarose gel at 60 V for 50 min.
2.13. Protein Isolation and Western Blot Analysis
For Western blotting, the protein was isolated from the yeast strain, according to a previous method [
32] with slight modifications. Ten milliliters of the yeast strain was collected in a 50 mL Falcon tube and centrifuged at 5000 rpm for 5 min at 4 °C. The supernatant was discarded, and the pellet was resuspended in 5 mL of TEK buffer solution (50 mM Tris at pH 7.5, 2 mM EDTA and 100 mM KCl) and centrifuged again at 5000 rpm for 5 min. The pellet was resuspended in 5 mL of TES buffer solution (50 mM Tris at pH 7.5, 2 mM EDTA, 0.8 M sorbitol, 20 mM β-mercaptoethanol and 2 mM phenylmethylsulphonyl fluoride) disrupted by bead beating. Next, 140 mM PEG3350 and 0.2 g/mL NaCl were added to the supernatant containing microsomes and immediately incubated on ice for 15 min. Afterwards, the sample was centrifuged at 10,000 rpm for 10 min, and the pellet was resuspended in 100 µL of TEG solution (50 mM Tris at pH 7.5, 2 mM EDTA and 40% glycerol). Protein concentrations were determined by the Bradford method (Bradford, M. M. 1976). Isolated protein in equal amounts (20 µg) was separated on a 12% polyacrylamide gel, as previously described by Laemmli (1970) [
33]. After separation, the protein was electro-transferred to a nitrocellulose membrane and kept in blocking buffer (50 mM Tris-HCl at pH 7.4, 150 mM NaCl, 0.1% Tween 20 and 5% skim milk) for 90 min at room temperature, as described by Rippert et al. 2002 [
34]. After washing with TBST (50 mM Tris-HCl at pH 7.4, 150 mM NaCl and 0.1% Tween 20) for 40 min, the membrane was incubated with corresponding primary antibodies at 1/1200 dilutions, and polyclonal goat anti-mouse IgG antibody (Invitrogen Cat. 31122, Waltham, MA, USA) was used as the secondary antibody at room temperature. Immunodetection was carried out by using ECL Western Blotting Detection Reagents (Amersham, Cat. RPN2235, Bundanggu, Seongnam, Korea) and an Image Quant™ LAS 4000 system (Gelifesciences, Cat. LAS 4000, Uppsala, Sweden).
2.14. Generation of OsCM Transgenic Rice
OsCM-overexpressing transgenic rice (OX-OsCM) plants were produced using Cheongcheong. Total RNA was isolated using the RNeasy Plant Mini Kit for cloning OsCM. The ORF (open reading frame) of OsCM (MH752192) was amplified using total RNA, and the amplified product was inserted into pENTR/D-TOPO (pENTR Directional TOPO cloning kit; Invitrogen) and then inserted into the gateway system (Gateway LR Clonase enzyme mix kit; Invitrogen) was inserted into the destination vector pSB11 for the expression of OsCM. The constructed vector was transferred to agrobacterium cells LBA4404 (Takara, Cat. 9115, Kusatsu, Shiga, Japan) by selecting the completely inserted OsCM through sequencing in E. coli. Constructed agrobacterium transformed into the callus of Cheongcheong. Cheongcheong seeds were sterilized for 10 min in 1% hypochlorite and then sterilized for 10 min with 70% ethanol. Then, it was washed with ddH2O and dried. The dried seeds were cultured for 2 weeks in N6 medium containing 2 mg of Auxin. In addition, induced callus was pre-cultured in N6 medium containing 2 mg of auxin for 3 days to increase vitality. Agrobacterium containing OX-OsCM vector was cultured at 28 °C for 3 days in YEP medium to transform into callus. Cultured agrobacterium was shacked with callus for 30 min. After the agrobacterium incubation, the culture was carried out in a co-culture medium in the dark for 3 days. Afterwards, the callus was washed with 500 mg/L carbenicillin, and after drying, cultured in N6 medium containing 50 mg/L hygromycin and auxin under light conditions (16/8 h photoperiod) for 2 weeks. After that, the callus that survived the selection medium was transferred to the regeneration medium containing NAA and kinetin. Plants that were shooting and rooting in the regeneration medium were transferred to soil after purification treatment.
2.15. Development of Transgenic Progenies and Field Experiments
In T0 generation of OX-OsCM, PCR and qPCR were analyzed for confirm the overexpression lines which are inserted with OsCM (data not shown), and T1 seeds were harvested for developed next generation. In the T1 generation, T2 seeds of OX-OsCM with stable gene expression were selected through molecular biological methods, and then breeding on a field for each spike, and T3 seeds were harvested in bulk. The planting distance was 30 × 15 cm. The amount of fertilization was N-P2O5-K2O=9-4.5-5.7 kg/10a, which was bred according to the Agricultural Science and Technology Research Research Standard of Rural Development Administration.
2.16. Animals for In Vivo Permeability Assay
All animal procedures were approved by the Animal Experimental Committee of National Institute for Korean Medicine Development (NIKOM) and carried out in accordance with the Guide for the Care and Use of Laboratory Animals (US National Institutes of Health Publications). Every effort was made to minimize both the number of animals used and their suffering. Seven-week-old male Sprague-Dawley (SD) rats were Orient Bio (Gyeonggi-do, South Korea). The rats were housed in a room under controlled conditions (23 ± 1 °C and 40–60% relative humidity) under a 12 h light/dark cycle with ad libitum access to water and standard laboratory diet. After 1 week of acclimatization, isometric tension measurement and blood sample collection were conducted.
2.17. Effects of cq-9 on Vascular Barrier Disruption under Septic Death Model
The cq-9 was artificially synthesized by confirming the structure and subsequently used for the sepsis experiment [
33]. LPS (serotype: 0111:B4, L5293), Evans blue and crystal violet were purchased from Sigma (Cat. 0111:B4, L5293, Saint Louis, MO, USA). Human recombinant HMGB1 was purchased from Abnova (Cat. H00003146-AP41, Neihu District, Taipei, Taiwan). Fetal bovine serum and Vybrant DiD were purchased from Invitrogen (Cat. V22887, Waltham, MA, USA). Primary HUVECs were obtained from Cambrex Bio Science (Cat. 10HU-012, East Rutherford, NJ, USA) and maintained, as previously described [
34,
35]. HUVECs at passages 3–5 were used. Male C57BL/6 mice (6–7 weeks old, 27 g) were purchased from Orient Bio Co. (Cat. C57BL/6, Jungwongu, Seongnam, Korea) and acclimatized for 12 days before starting the experiment. Animals (five per polycarbonate cage) were housed under controlled temperature (20–25 °C) and relative humidity (40–45%), with a 12:12 h light:dark cycle. Animals received a normal rodent pellet diet and water ad libitum during acclimatization. All animals were treated in accordance with the Guidelines for the Care and Use of Laboratory Animals issued by Kyungpook National University and the study’s design was approved by the Animal Care Committee of the University (IRB No. KNU 2016-54). To induce sepsis, male mice were anesthetized with Zoletil
® (tiletamine and zolazepam, 1:1 mixture, 30 mg/kg) and Rompun
® (xylazine, 10 mg/kg). The CLP-induced sepsis model was prepared as previously described [
36]. Briefly, a 2cm midline incision was made to expose the cecum and adjoining intestine. The cecum was then tightly ligated with a 3.0 silk suture 5.0 mm from the caecal tip and punctured once using a 22 gauge needle to induce high-grade sepsis [
37]. The cecum was then gently squeezed to extrude a small amount of faces from the perforation site and returned to the peritoneal cavity. The laparotomy site was then sutured with 4.0 silk. In sham control animals, the caecum was exposed, but not ligated or punctured, and then returned to the abdominal cavity. Briefly, HUVECs were plated (5 × 104 cells/well) in Transwell plates with a pore size of 3 µm and a diameter of 12 mm and cultured for 3 days. Confluent monolayers of HUVECs were treated with LPS (100 ng/mL) for 4 h or HMGB1 (1 g/mL) for 16 h, followed by treatment with SFN. Transwell inserts were then washed with PBS (pH 7.4), and growth medium containing 0.5 mL Evans blue (0.67 mg/mL) and 4% BSA was added. Fresh growth medium was then added to the lower chamber, and the medium in the upper chamber was replaced with Evans blue/BSA. Ten minutes later, the optical density in the lower chamber was measured at 650 nm. For the spectrophotometric quantification of endothelial cell permeability in response to increasing concentrations of each compound, the flux of Evans blue-bound albumin across functional cell monolayers was measured using a modified two-compartment chamber model, as previously described [
38,
39].
2.18. Isometric Tension Measurement
Vascular tension was evaluated in thoracic aortic rings collected from SD rats. A vasoconstriction study was performed as described previously [
40,
41]. Thoracic aorta was excised and immersed in ice-cold, modified Krebs solution (in mM: NaCl 115, KCl 4.7, CaCl
2 2.5, MgCl
2 1.2, NaHCO
3 25, KH
2PO
4 1.2, and dextrose 10). The aortas were cleaned of all connective tissue, soaked in Krebs-bicarbonate solution, and cut into four ring segments (3.5 mm in length). Some rings were denuded of endothelium by gently rubbing the internal surface with a forcep edge. Each aortic ring was suspended in a water-jacketed organ bath (6 mL) maintained at 37 °C and aerated with a mixture of 95% O
2 and 5% CO
2. Each ring was connected to an isometric force transducer (Danish Myo Technology, Skejbyparken, Aarhus N, Denmark). Rings were stretched to an optimal resting tension of 2.0 g, which was maintained throughout the experiment. Each ring was equilibrated in the organ bath solution for 90 min before the experiment measuring the contractile response after the addition of 50 mM KCl. To determine the effect of cq-9 on the maintenance of vascular tension in rat endothelium-intact or endothelium-denuded aortic rings, vascular contractions were induced using the thromboxane A2 agonist, U46619 (30 nM, 20 min). When each contraction reached a plateau, rice extract and cq-9 were added cumulatively (0.1–0.5 mg/mL) to elicit vascular relaxation. In the second experiment, we investigated the inhibition of the relaxation response by treating endothelium-intact aortic rings with Apamin (500 nM) and tetraethylammonium (TEA, 5 nM) NG-nitro-L-arginine methyl ester (L-NAME, 100 μM) for 30 min. After U46619 treatment, cq-9 was cumulatively added to the aortic rings.
2.19. Blood Sample Collection and Platelet Aggregation Assay
For the method used for blood sample collection and platelet aggregation refer to the work in [
42]. The blood samples were collected up to the mark in sky blue capped vacutainer containing trisodium citrate, thus assuring 1:9 ratio of blood is to anticoagulant. The platelet-rich plasma (PRP) and platelet-poor plasma (PPP) were prepared using Tyroid buffer (137 mM NaCl, 2 mM KCl, 12 mM NaHCO
3, 5.5 mM glucose, 1 mM MgCl
2, 0.3 mM NaHPO
4, pH 7.4) and centrifuged (2000 rpm, 7 min). Platelet aggregation was measured in a two channel aggregometer (Chrono-log Lumi-Aggregometer model 560-Ca, Havertown, PA, USA) at 37 °C with stirring (1000 rpm). Washed platelets were pre-incubated with various concentrations of either rice extract and cq-9 for 1 min in the presence of 1 mM calcium chloride (CaCl
2), followed by stimulation with various agonists (Collagen, ADP, or thrombin) for 6 min with continuous stirring at 37 °C.
2.20. Statistical Analysis
Data were analyzed by the Student’s t-test using IBM SPSS version 21.0. Microsoft Excel 2013 was used to design the graphics and tables.
4. Discussion
Development of the resistance rice and study on the defense genes with determination of natural products and breeding for pest-resistant plants is a predominant focal point of agricultural research. Agricultural traditions have made necessary contributions to our knowledge and shaped our perceptions on plant resistance to pests for the duration of plant molecular breeding. Particularly, rice resistance to WBPH is well studied in the context of defense genes and natural management of these pests in agriculture. The most efficient and economical way of controlling WBPH is by developing resistance rice cultivars, resistant genes and natural products. The genetic alteration of secondary metabolites pathways during stress condition produces side products which are most significantly involved in mitigation of human disease. QTLs analysis is a basic tool to determine the gene and pathway involved in the specific stress inducing tool. In our study, we analyzed the genes and pathways involved in WBPH stress through QTLs analysis. We detected QTLs associated with cq-9 of the CNDH lines putatively on chromosomes 1, 2, 4, 6, 7, 8 and 12, respectively. The physical map of each chromosome was completed using a sequence database (
http://www.gramene.org/, accessed on 11 October 2020). The vertical lines in the physical map indicate the advent of complete genetic linkage map consisting of codominant DNA marker typically SSR markers. QTL associated with rice resistance were identified the genes on the regions of map base genetic contribution.
In the results, the additive effects of the QTL were positive with the additive coming fours QTL detected on chromosomes 1, 2, 4, 6, 7, 8 and 12, respectively. Regarding the additive effects, contribution of phenotype variation and genotype variation, a total of 21 QTLs identified by Windows QTL Cartographer 2.5, with one QTL (RM23191) detected on the same location. QTL mapping analyzes the interaction between genotype and phenotype and detects the sequence region most related to the phenotype [
43]. In this research, we focused on the regions that are mapped identically every year through repeated experiments for 4 years.
In this research, the newly discovered gene OsCM was located on chromosome 8, and chromosome 8 showed a higher density than other chromosomes. Therefore, more accurate QTL could be obtained. From 2016 to 2019, there are 17 QTLs detected that show LOD of 2.5 or more when using the WBPH resistance score. Using the results of HPLC analysis, QTL mapping was carried out in 2020, and four QTLs were detected. RM23191 of chromosomes 8 was commonly detected in 2016 and 2018 when QTL mapping was performed using WBPH resistant score, and also detected in 2020 when QTL mapping was performed using the results of HPLC analysis after WBPH inoculation, centering around this region, we searched for candidate genes for WBPH resistance. In this study, we performed QTL mapping of WBPH resistant gene through WBPH resistant score and HPLC analysis for 5 years, and searched candidate genes centered on RM23191 of commonly detected chromosome 8. Here, eight candidate genes were detected (OsNox6, OsCCR, OsCM, OsOPR7, OsRR33, OsGLP1, OsbZIP66, OsDERF3).
In our research, we evaluated
OsCM (accession number MH752192) as a candidate gene which induces in response to WBPH resistant.
OsCM is a key enzyme in the shikimate pathway, which catalyzes a major step of converting chorismate into prephenate, a precursor of Phe and Tyr. The shikimate pathway provides aromatic compounds in prokaryotes, ascomycete fungi, apicomplexans and higher plants, but it is absent in mammals, which makes it an antibiotic target [
44]. The conversion of chorismate to prephenate is a sigmatropic shift reaction in the shikimate pathway [
34,
45], which can also speed up the synthesis of a wide range of secondary metabolites through the synthesis of phenylalanine (Ph) and tyrosine (Tyr) [
46]. Chorismate possesses a significant position in the shikimate pathway as it represents a main controlling linkage between primary and SMs synthesis in higher plants, which is controlled by
CM. Furthermore, chorismate synthesized salicylate through isochorismate synthase [
47,
48], which is further involved in the synthesis of phylloquinone [
49,
50]. Cochlioquinone also known as luteoleersin [
51] and the scientific name of basic skeleton is 17-methoxycochlioquinone proposed by Geris et al. 2009 [
51]. It is a highly complex compound, and its biosynthesis is also very complex but here we will explain it briefly. Basically, this compound is composed of two basic units: one is a farnesyl group, which is also identical to oxadecalin, and the second unit is an acetogenin derivative of an aromatic compound, and we synthesized cochlioquinone by cycloaddition of both the segments. Moreover, we established the mixed biosynthesis of cochlioquinone through the introduction of a farnesyl unit onto an aromatic precursor whose secondary metal groups are provided by methionine which is produces in methionine biosynthesis pathway [
52]. The first unit of cochlioquinone is farnesyl pyrophosphate which is synthesized from tyrosine in the shikimate pathway. Tyrosine is the ultimate source of acetyl-CoA synthesis by a series of reactions like oxidative decarboxylation of pyruvate and tyrosine like other amino acids (phenylalanine, tryptophan and lysine) catabolism. Furthermore, acetyl-CoA goes under a series of reactions in isoprenoid pathway (mevalonate kinase pathway) and gives isopentenyl pyrophosphate (IPP) which further pair with another molecule of IPP and produce geranyl pyrophosphate (GPP). This GPP is the accepter of another isoprene molecule and as a result produce farnesyl pyrophosphate (FPP) which is the precursor of all type of sesquiterpenes [
53]. Here, it is important to mention that tyrosine and phenylalanine synthesis highly regulates by
CM. The prenylation of acetogenin aromatic-derived nucleus leading to an intermediate complex and the decarboxylation–hydroxylation reaction converts it into another intermediate which is further converts to cochlioquinone compound by the cyclization of the farnesyl chain [
52]. This prenyl accepter primarily produced by polyketides but also it can be derived from tyrosine which is an evidence of
CM involvement in cochlioquinone synthesis [
54]. Moreover, quinone is the basic moiety of this compound which is also a product of the shikimate pathway.
Chorismate mutase and shikimate pathway are also directly involved in another epi-cochlioquinone compound which is identical to cochlioquinone. In order to explain epi-cochlioquinone very easily it can be divided into two segments. The first one is catechol (1,2-dihydroxybenzene) and the second is oxadecalin, but
CM is only concerned with the synthesis of first segment. The main skeleton of cochlioquinone would be synthesized by the cycloaddition of these both segments described by Hosokawa et al. 2010 [
55]. Catechol would be synthesis by stereoselective manner of treatment of aminophenol with quinone which is the product of shikimate pathway. The reaction for synthesis of catechol is presumed that, first the aminophenol should be oxidized to iminoquinone which further gives o-quinone by receiving acid hydrolysis which works as an oxidant for aminophenol to synthesize catechol and iminoquinone through autoredox catalysis. And also phenylalanine is the precursor of benzoic acid which is first hydroxylated to SA at the ortho-position and then converted to catechol, moreover it is predicted that SA is directly converted to catechol due to oxidative decarboxylation [
56].
Supplementary Material (Supplementary Materials Figure S2) describes the role of
OsCM in the shikimate pathway and the correlation of the shikimate pathway with cq-9, which is also known as luteoleersin [
51]. The scientific name of its underlying structure is 17-methoxycochlioquinone [
57]. It is a highly complex compound, and its biosynthesis is also very complex. Cochlioquinone is composed of two basic units, one is a farnesyl group or also identical to oxadecalin, and the second unit is acetogenin derivative of aromatic compound and synthesise cq-9 by cycloaddition of both the segments [
55]. The structure of cq-9 was compared with other structure of Cochlioquinone such as Cochlioquinone A, B and D. The difference between Cochlioquinone A and Cochlioquionone B is that -OH and -H are bonded to C-12 (R3), and -OCOCH3 and =O are bonded to C-4 (R4), respectively [
58]. Cochlioquionone D is similar to B, but has a double bond of C-2 and C-3 [
59]. The molecular structural of cq-9 is most similar to that of Cochlioquinone A, except that the methyl group is bonded to C-15 (R1) rather than C-14 (R2). The mixed biosynthesis of cq-9 occurs through the introduction of a farnesyl unit onto an aromatic precursor, whose secondary metal groups are provided by methionine, which is produced in the methionine biosynthesis pathway [
52]. The first unit of cq-9 is farnesyl pyrophosphate, which is synthesized from Tyr in the shikimate pathway. Tyr is the ultimate source of acetyl-CoA synthesis, produced by a series of reactions, like oxidative decarboxylation of pyruvate and Tyr, and the catabolism of other amino acids (Phe, Trp and lysine). Furthermore, acetyl-CoA undergoes a series of reactions in the isoprenoid pathway (mevalonate kinase pathway) and gelites isopentenyl pyrophosphate, which further pairs with other isopentenyl pyrophosphate molecules and produces geranyl pyrophosphate. This geranyl pyrophosphate is the accepter of another isoprene molecule and, as a result, produces farnesyl pyrophosphate, which is the precursor of all types of sesquiterpenes [
52]. Tyr and Phe synthesis is highly regulated by the
OsCM. The prenylation of the acetogenin aromatic-derived nucleus, leading to an intermediate complex and the decarboxylation–hydroxylation reaction, converts it into another intermediate, which is further converted to cq-9 by the cyclisation of the farnesyl chain [
52]. This prenyl accepter is primarily produced by polyketides, but it can also be derived from Tyr, which is evidence of the involvement of
OsCM in cochlioquinone synthesis. Moreover, quinone is the basic moiety of this compound, which is also a product of the shikimate pathway.
OsCM is not concerned with the synthesis of the second unit of the compound, but it is necessary to describe its synthesis briefly. It has been reported that oxadecalin is the derivative of glycosyl cyanide by cycloaddition reaction with ketone and reductive alkylation with cyclopropylketone. It can be summarized that
OsCM has a vital role in the shikimate pathway due to upregulation of both Tyr and Phe, which is the ultimate source of catechol and the farnesyl moiety in the synthesis of both cq-9 and epi-cochlioquinone, respectively.
Cochlioquinone has already been reported to cause toxic reactions in various cancer cells [
60,
61]. In particular, Zhou et al. (2015) [
62] identified that cochlioquinone caused cytotoxicity in the A549 cell line and SK-OA-3 cell line, which are cells that mainly cause cancer in humans. We succeeded in extracting cq-9 from rice for the first time and inoculated into the sepsis-inducing model mice. Moreover, the survival rate was increased by 60% in sepsis-induced model. It has also been reported that cq-9 has antimicrobial activity against
Phythium graminicola [
63], which causes severe damage in rice seedlings [
64].
Rice extract or cq-9 induced significant reduction of U46619 -mediated contraction in endothelium-intact compared with endothelium-denuded rat aorta rings. Furthermore, rice extract or cq-9 induced a dose-dependent vasodilation in endothelium-intact rat aortic rings, which was attenuated by L-NAME, a nitric oxide synthase blocker. These findings suggest that endothelium-dependent relaxation induced by rice extract or cq-9 leads to activation of eNOS, resulting in production of NO in endothelial cells [
65]. However, pretreatment with a K
+ channel blocker, apamin or TAE, did not affect endothelium-dependent vasorelaxation induced by rice extract or cq-9, indicating that endothelium-dependent vasorelaxation by rice extract or cq-9, does not mediate the K
+ channel pathway. Furthermore, this vasodilation proved that cq-9 was higher than that of rice extract. Rice extract or cq-9 extract inhibited collagen-, ADP- and thrombin-induced platelet aggregation in a dose-dependent manner. Furthermore, this collagen-induced platelet aggregation proved that cq-9 was higher than that of rice extract.
In this research, 120 CNDH lines were analyzed to QTL mapping associated with WBPH resistance. QTLs were analyzed using the phenotype of the 120 CNDH lines and HPLC analysis data, and finally OsCM was screened. OsCM is an important regulatory enzyme in synthesizing cq-9, and OsCM transgenic rice is highly resistant to WBPH. When cq-9 was treated in CLP-surgery mice, the survival was increased by 60%. Furthermore, the aorta of mice treated with cq-9 had an effective vasodilation response, and significantly reduced the aggregation of rat platelets induced by collagen treatment. The results of this research show that cq-9 produced by plants can be effective in treating animal diseases and can be effectively used to study the relationship between Plant-Insect-Human in the future.