In the original version of article [1], the y-axis units in Figure 6a,b were incorrect. The figure presenting the correct units is as follows. Along with the corrections, the units of maximum power, Pmax, in the article have been changed from “μW” to “nW”.
Original image:
Revised image of Figure 6:
Figure 6.
(a) Maximum power (Pmax) of thin-film thermoelectric generators as a function of temperature difference (ΔT) and (b) Pmax of the generators as a function of ΔT.
The corresponding author apologizes for the incomplete information regarding authorship in the original manuscript. The change does not affect the scientific results. The manuscript will be updated, and the original will remain available. A link to this Correction will be added.
Reference
- Yamamuro, H.; Takashiri, M. Power generation in slope-type thin-film thermoelectric generators by the simple contact of a heat source. Coatings 2019, 9, 63. [Google Scholar] [CrossRef]
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).