1. Introduction
Human hair constitutes the major appendage of the skin and is thought to play important roles in appearance, thermoregulation, sensory input and barrier protection [
1]. Throughout life, a hair follicle undergoes constant cycles of regeneration, producing hair shafts that can sometimes reach the length of several meters. The main components of hair are keratins, members of the intermediate filament family of proteins that are distinguished by a relatively high cysteine content. The cysteine residues form intra- and inter-molecular disulfide bonds, as well as polysulfide bonds, that collectively contribute to the mechanical strength and antioxidant capacity of hair fibre [
2,
3]. There are seventeen subtypes of keratins identified, which can be distinguished based on the isoelectric points, molecular weight and specific localization within the compartments of the hair shaft. In addition to the disulfide bonds, a significant number of hydrogen bonds contribute to the cross-linking of the keratins and the structure of hair fibres [
2,
3,
4].
It is thought that the shape of the hair fibre can be related to the geometric and molecular effects of keratins, particularly the even distribution recorded in straight hair and asymmetric differentiation of the precortex, giving rise to the curly shape of the hair shaft [
5]. The elasticity and strength of textured hair have been closely associated with the presence of disulfide bonds as cross-linking structures supporting fibre shape, and they are also major subjects of hair treatments requiring transient breaking and reformation. Other major factors that are thought to be linked to the phenotypic differences characterising textured hair include the formation of the structural unit through the aggregation and folding of keratins and water-soluble keratin-associated proteins (KAPs) that contribute to the main hair compartments, the cuticle, cortex and medulla. The organisation of the fibres within the cortex is closely aligned with hair shaft shape and shows significant variability between straight and curly hair, with bilateral symmetry and cortical cell length playing a central role in fibre curvature. Other important components of the cuticle and the cortex are lipids, primarily 18-methyl eicosanoid acid (18-MEA) covalently bound to keratins by thioester bonds, which provide protection against mechanical and chemical stress and may vary in content among ethnic hair types [
6].
The relatively low content of fibrous proteins in African hair could be a contributing factor to the susceptibility to breakage [
7]. It has been demonstrated that textured hair might be more sensitive to environmental damage such as ultraviolet radiation (UVR), which particularly affects cuticle and hair surfaces through a decrease in lipid content and decreased tensile strength [
8]. UV exposure can also aggravate the bleaching process through oxidization and loss of the photoprotective function of melanin in the cortex [
7]. The variability of textured hair occurrence can be linked to skin ethnicity, for example, ranging from ~40% for wavy to ~12% for curly type in European and Asian populations and ~95% for curly type in African populations [
6]. A significant proportion of the worldwide population with textured hair also resides in geographical areas with a high UV index (1 UV index is equivalent to 25 milliwatts/square meter), which can reach values of ~10 in West Africa, ~9 in South Asia and 15~ in South Africa [
9,
10,
11]. Curly hair can be also frizzy and dry, whilst coily or kinky hair types, particularly of African origin, can be also susceptible to brittleness and breakage due to low tensile strength [
12,
13].
Hair styling practices such as chemical relaxing and mechanical or thermal factors carry particular risks [
14]. The correct choice of hair-protective personalized products, with the increasing focus on textured hair, is an emerging trend in the current global research and industry market [
15,
16]. Conditioning products are formulated with a range of ingredients that can fulfil the requirements of different hair types, based on natural or synthetic polymers, mineral and vegetable oils and hydrolysed proteins able to restore the charge, structure of the cuticle and moisture of the hair fibre. At the same time, next-generation hair care products containing bioactive compounds with predicted or proven activity towards the specific requirements of different hair types are in high demand [
7,
16]. The formulation of such products requires the application of advanced technologies that can assist with the screening and selection of active ingredients, which can be subsequently validated against many of the physical and biochemical characteristics of hair fibres. Currently, there is increased focus on the methodologies allowing fast and accurate evaluation of hair care products, including scanning electron microscopy, infrared spectroscopy and brightness and protein content measurement [
17,
18].
In this study, we investigated the protective effect of a novel conditioner against the damage of hair caused by UVR. The conditioner has been based on a blend of three active ingredients with significant anti-oxidative and UVR-absorbing capacities: mangiferin, naringin and ferulic acid. Using several analytical approaches, we provide consistent evidence that curly hair shafts are more sensitive to UVR damage than straight hair shafts. In particular, the alterations to textured hair by UVR appeared to be associated mostly with changes to the hair surface, permeability and keratin organization; these damaging effects were moreover significantly reduced by pre-treatment of the hair with conditioner. These data point to the importance of screening and selecting the right ingredients compatible with specific hair types and allowing the formulation of efficient and suitable hair care products.
2. Materials and Methods
2.1. Spectral Absorbance
Mangiferin (Carbosynth, Compton, UK), ferulic acid and naringin (Sigma Aldrich, St. Louis, MO, USA) were dissolved in DMSO (Fisher Scientific, Geel, Belgium) at 1% (w/v) and diluted with deionised water to 0.005%. The hair conditioner was diluted to 0.1% (w/v) with deionised water. Alkaline hair extracts were diluted with deionised water to a concentration of 0.01% (v/v). The spectral absorbance of the samples was measured with a SpectraMax iD3 microplate reader (Molecular Devices, San Jose, CA, USA) at intervals of 5 nm.
2.2. Total Antioxidant Capacity
The total antioxidant capacities of the samples were measured according to the manufacturer’s protocol (Abcam, Cambridge, UK). Briefly, the Trolox standard was prepared with several dilutions containing 0–2 mM of Trolox/well. The samples and Trolox standards were transferred to 96-well microplates and incubated with a 100 μL Cu2+ working solution for 90 min at room temperature in the dark. The colourimetric output was measured in a microplate reader (SpectraMax iD3 Microplate Reader, Molecular Devices) at OD 570 nm. Sample total antioxidant capacity (TAC) was calculated as TAC = (Ts/Sn) × D, where Ts = TAC amount in the sample well calculated from a standard curve, Sn = sample volume added in the sample wells (100 μL) and D = sample dilution factor. For statistical analysis, the data comparing variation between the samples were validated using one-way analysis of variance (ANOVA) with a post-hoc Tukey HSD test, n = 3. The graphs represent mean ± SEM with statistically significant outputs ** shown where p < 0.01.
2.3. Hair Samples
Hair samples were purchased from an online distributor (Anna Hair Co., York, UK) of human hair as hair tresses (South American origin). The samples (several strands) were rinsed thoroughly with deionised water and dried at room temperature before processing for analysis. For the pre-treatment with conditioner, the hair was submerged for 10 min, rinsed with deionised water and dried for 3 h at room temperature before exposure to UVR. For the treatment with Rhodamine B (Sigma Aldrich, Steinheim, Germany), the compound was solubilised in ethanol (Fisher Scientific, Loughborough, UK) at the concentration of 10 mg/mL and diluted to 0.005% (w/v) with deionised water. The hair was submerged in the Rhodamine B solution for 3 min, rinsed briefly with deionised water and processed for analysis.
2.4. Extraction of Hair Keratins
Hair samples (several strands) were powdered using a pestle and mortar. The hair powder was suspended in 1 M NaOH (Acros Organics, Geel, Belgium) at a concentration of 10 mg/mL. The samples were heated to 95 °C for 45 min until the hair powder was solubilised. The extracts were neutralised with HCl (VWR, Rosny-sous-Bois, France) that was centrifuged briefly at 12,000 rpm and diluted to 0.01% (v/v) with deionised water for analysis.
2.5. UV Irradiation
For UVR treatment, the hair samples (several strands) were exposed to a germicidal lamp (Philips TUV G30T8 30 W bulb) providing predominantly 254-nm light, for 15 and 30 min. UV dose (mJ/cm2) was calculated from the lamp’s specification of 125 mW/cm2 at a distance 1 m × exposure time in seconds, 125 mW/cm2 × 900 sec. at 0.75 m distance = 150 mJ/cm2 and 125 mW/cm2 × 1800 sec. at 0.75 m distance = 300 mJ/cm2. All experiments were performed at room temperature.
2.6. Biometric Analysis of Hair Fibres
The light and fluorescent images were captured using an Olympus CK40 microscope and photographed with an Olympus U-PMTVC Camera and the Infinity Capture v 6.5.7 software package (Lumenera, Ottawa, ON, Canada) with a lens magnification of 10×. Biometric data were collected manually based on the images using the ImageJ software package (ImageJ 1.36b, National Institute of Health, Bethesda, MD, USA) from 3 hair strands. From the light images, the measurements of hair thickness were performed on three consecutive images by tracing alongside a straight line. The collected measurements of length units were then converted to microns, based on the 1392 pixels in the ImageJ corresponding to 605 microns. For densitometry analysis of hair darkness in light images and rhodamine uptake in fluorescent images, the intensities of the signals were measured in a defined area on three consecutive images for each treatment using ImageJ and adjusted to control untreated sample values equal to 1. For statistical analysis, the data were validated using ANOVA with a post-hoc Tukey HSD test, n = 3. The graphs represent the mean ± standard deviation, with statistically significant outputs shown ** where p < 0.01.
2.7. ATR-FTIR Analysis
Cleaned hair samples (several strands) were powdered using a pestle and mortar to approximately 0.5–1 mm particles. The solid optically dense powder was transferred to the FTIR spectrometer (PerkinElmer—UATR Two, Beaconsfield, UK) fitted with a diamond ATR crystal. The spectrum of the sample was recorded in the wavelength range of 4000 cm−1 to 450 cm−1; the software used was Spectrum IR. For the presentation of the data on graphs, the transmittance (%T) values were converted to absorbance (Abs) based on the equation Abs = 2-LOG (%T).
2.8. Scanning Electron Microscopy (SEM)
The hair samples (3 strands) were mounted onto the SEM specimen stubs and coated with gold using a sputter coating machine. SEM was performed using a TESCAN VEGA3 (TESCAN-UK, Cambridge, UK) scanning electron microscope at SEM HV: 8 kV. The image data were recorded at SEM magnifications of 200×, 1.00 kx and 5.00 kx and assembled in PowerPoint.
4. Discussion
In this study, we analysed the effect of UV irradiation on the morphology and molecular structure of straight and curly hair and provided evidence of the protective capacity of the hair conditioner that was created based on natural UVR-absorbing and antioxidative ingredients, namely, mangiferin, ferulic acid and naringin. All ingredients demonstrated strong UV absorbance, mostly within the UVC and UVB range, with mangiferin showing an additional peak at 365 nm, indicative of a strong capacity to also absorb UVA light. The UV absorbance was also recorded in the conditioner formulation tested at 0.1%. All ingredients had a significant total antioxidant capacity (TAC), which was most pronounced for mangiferin. It is well-established that all three compounds are potent antioxidants, able to neutralize and prevent the formation of reactive oxygen species (ROS) and reduce oxidative stress [
26,
27,
28]. The ingredients could therefore have a protective effect on the hair shaft by absorbing UVR, reducing free radicals and the breakage of disulfide bonds. Pre-treatment of hair samples with the conditioner before UV irradiation and subsequent analysis of hair extracts revealed increased TAC, which was additionally higher for textured hair when compared with the straight hair. This indicates that the conditioner would penetrate the hair, likely protecting the keratins from oxidative damage.
Hair morphology can be defined by parameters such as thickness and darkness. In this study, we recorded that the curly hair was significantly more sensitive to UVR exposure than the straight hair, resulting in more pronounced and progressive thinning and bleaching of fibres after irradiation with 150 mJ/cm
2 and 300 mJ/cm
2 UV. These parameters were significantly restored by pre-treatment with the conditioner before irradiation, resulting in increased thickness and darkness for both hair types when compared to UVR only. Hair fibre and its proteins are usually protected by pigment molecules that filter and absorb UVR, however, such molecules are also degraded by exposure to radiation [
29]. Preservation of hair darkness during UVR exposure indicates the protective effect of the conditioner due to the UV filtering capacity of its ingredients.
The protective effect of the conditioner was additionally confirmed by the rhodamine B assay. The dye penetrated the curly UV-irradiated hair more efficiently than the straight hair, indicative of more pronounced damage to the structural integrity of the fibre that corresponded to the UVR dose. Pre-treatment with conditioner before UVR exposure prevented the diffusion of rhodamine B, particularly in structured hair, suggestive of a protective effect on the hair cuticle and perhaps the cortex.
The hair shaft is composed of mainly keratins, the intermediate filament proteins with high cysteine content responsible for the mechanical strength and the antioxidant capacity of hair fibre [
2,
3]. Extracts of the keratins obtained from curly hair after UV irradiation demonstrated a visibly decreased peak at 210–220 nm in the spectral absorbance analysis compared to straight hair. This suggested more profound changes in the keratins in curly hair caused by UVR, which could also be prevented by pre-treatment with the conditioner. The ATR-FTIR spectroscopy analysis revealed prominent peaks of protein absorbance corresponding to keratins, namely, amide I, amide II and amide III. Within amide I, the secondary structure of keratin was most strongly represented by the random coil. All three peaks were reduced in the curly control hair compared to the straight hair. Similar absorbance profiles were obtained for the hair pre-treated with the conditioner before UVR exposure. UV irradiation caused profound alterations in the biochemical bonds of keratins in untreated curly hair, with increases in amide I, II and III absorption likely caused by changes in the molecular densities and conformation of keratins linked to the thinning of hair fibres. Another bond that was strongly affected in curly hair was the O–H, with stretching characterizing carboxyl and hydroxyl groups. Carboxyl groups in aspartic acid and glutamine contribute to a negative surface charge of the hair. It is recognized that damaged hair accumulates more carboxylate from the oxidative cleavage of peptide bonds, where the altered hair surface properties can be also associated with changes in hydroxyl groups, which is consistent with the absorbance profiles observed in this study [
30,
31].
Alkane CH2 groups representing fatty acids and lipid acyl molecules were also affected by UV irradiation in this study. It has been reported previously that, despite similar lipid compositions, the textured hair of an African origin contains fewer integral lipids and free fatty acids than the straight hair of an Asian origin. The integral lipids could moreover contribute to protection against hair shaft damage by UVR [
8]. The reduced peaks corresponding to alkane groups in curly hair recorded in this study could also represent the reduced lipid content. Interestingly, cosmetic oil-based formulations containing alkanes have applications in hair care [
32]. Finally, the −SO
3 stretch and S-OR ester group were also more affected by UVR in the curly hair when compared to the straight hair. The hair that is damaged due to bleaching was shown to contain higher quantities of sulfonate −SO
3 groups with negatively charged surface groups corresponding to cysteic acid. Such alterations were due to the cleavage of thioester bonds and cysteine oxidation [
33]. The increase in peak absorbance represented by these groups in UV-irradiated curly hair in the present study is consistent with increased oxidative damage involving cysteine. The protective effect of the conditioner was evident through the absorbance profiles, which were similar to the un-irradiated controls in both hair types, however, the changes were more pronounced in curly hair, indicative of a stronger effect of the conditioner.
These results were subsequently confirmed by SEM analysis, indicating more extensive damage to the fibre surface of UV-irradiated curly hair than straight hair, which was associated with alterations of the cuticle edge and cuticle scales, together with a significant loss of fibre volume. The visible effects of the conditioner were mostly observed in increased hair volume in both hair types and a smooth surface of the fibre in curly hair.
Recent studies have led to a better understanding of the molecular and biophysical differences between straight and textured hair, which opens up and supports the growing trends in personalized hair care. Curly hair, particularly of African origin (94.9% population), has a smaller diameter at bending points, elliptical cross-section, thinner cuticle layer, decreased water retention and is more prone to mechanical breakage than the straight and wavy hair of European and Asian origins [
6,
16]. Hair curliness is associated with the fibre diameter and tensile strength or elasticity, showing an inverse correlation with both factors, which could explain the propensity of very curly hair to break [
6].
Hair fibres are also highly responsive to environmental factors, such as chemical exposure or irradiation, causing structural and molecular damage, with a significant percentage of individuals with curly hair also residing in geographical areas with a high UV index. Current strategies to protect and repair damaged hair include cosmetic treatments that are compatible with hair shaft structure and biophysical properties. Modern hair conditioners can lubricate the cuticle whilst increasing the hydrophobic properties and neutralising the negative charge of the hair fibre. Based on the molecular weight, the active ingredients can penetrate the surface only or the cortex. Hair conditioners are formulated to strengthen the cuticle, decrease frizz, detangle the hair and increase its smoothness and shine [
16]. The hair conditioner and the active ingredients described in this study offer all these benefits, with an additional focus on relevant factors such as ethnicity and hair type. Development of similar new hair products will require an acknowledgement and a deeper understanding of individual variations in hair fibres present in different ethnicities.