1. Introduction
In the age of fast economic development and urbanization, traditional villages and rural lifestyles are confronted with a series of crises, especially in developing countries such as China. Some phenomena have been observed, such as migration from rural areas to cities, the disappearance of rural culture, damaging of architectural buildings, abandonment, and occupation of agricultural lands, which have caused detrimental impacts on rural development. Moreover, the values of historical villages have been gradually reconsidered. In China, more than 4000 villages are acknowledged as national traditional villages due to their historical, cultural, architectural, aesthetic, and landscape values [
1]. There is an increasing number of scholars involved in studies on the protection of traditional villages [
2], rural landscape [
3], tourism of historical villages [
4], and revitalization of the rural economy [
5]. In particular, the protection of rural architectural heritage remains a topical issue among architects, landscape architects, and urban planners. Compared with urban areas, rural areas are peculiar owing to their characteristics in architectural forms. Building materials such as wood, stone, and earth are common for rural buildings but also very vulnerable. Thus, preserving the architectural heritage in rural areas is an important factor for stimulating the local economy, promoting rural tourism, and facilitating cultural inheritance [
6,
7]. It is imperative to protect the authenticity and integrity of these villages as part of cultural assets for future generations.
With the advancements of the internet and spatial technologies, more techniques are introduced into the identification, documentation, protection, and restoration of the heritage of traditional villages, such as building information modeling (BIM), augmented reality (AR), and geographic information system (GIS). In practice, GIS is used for studying the management of rural heritage based on its geodatabase [
8], analyzing spatially the evolution of the rural landscape [
9], and helping make decisions associated with the analytic hierarchy process (AHP) [
10]. Furthermore, remote sensing (RS) techniques are also applied to monitor and assess rural sites, predicting the hazards in their surrounding areas [
11], classifying the resource types of rural tourism [
12], etc. Among those, light detection and ranging (Lidar), digital photogrammetry, and territorial land scanning (TLS), as some of the latest techniques applied in surveying and mapping, are considered to be efficient and powerful in heritage, archaeological, ecological, and landscape studies [
13], especially in the process of data acquisition, site survey, mapping, and modeling [
14]. As known, different remote sensing methods have different characteristics and are used in various fields to obtain real-time data. It is necessary to select a suitable surveying and mapping method according to the specific characteristics and requirements of the objectives and tasks.
Compared with traditional measuring techniques, TLS technology is an automatic, noncontact, and accurate method for measuring the coordinates of object surfaces systematically, providing precise 3D information of the environment [
15], which has the advantages of sensing detailed data (building appearance, structures, colors, field of view, noise level, incidence angle, waveform, texture, and surroundings with high accuracy); simple, faster, and efficient operation; less physical damage to objects; and being effective for scanning irregular surfaces and complicated structures. Ancient Chinese architectural buildings abundant in details and decorations can easily be damaged by survey instruments. Therefore, TLS is a powerful instrument to support related projects for surveying ancient buildings and structures. Additionally, the images of high spatial resolution obtained by coordinate systems can be simply used to build model visualizations based on point clouds from TLS and connected with other GIS data, which facilitate the observation of architectural details and enable viewing heritage sites from different angles, distances, and scales [
16]. However, TLS still has several shortcomings awaiting further improvement, e.g., height limitations of the sensor to record the roof of buildings and other environmental influences on the sensing process. For example, light and shadow conditions will change the color and texture of an architectural surface, influencing the accuracy of obtained data.
As seen, TLS has both advantages and disadvantages in diversified applications. Regardless, it has been introduced into cultural heritage projects globally. For instance, the combination of UAS photogrammetry and TLS allows generating dense and accurate 3D models of historical buildings [
17], the integration of TLS and image-based data allows developing metric documentation of historical objects in museums based on orthophoto generation [
18], and the fusion of Amyotrophic Lateral Sclerosis (ALS) and TLS, with the help of reference points, is used to extract and document cultural heritage [
19]. There are also many other case studies in various countries focusing on the recording and documentation of historical buildings, such as Haut-Andlau Castle in France [
20], the Al-Khazneh heritage in Jordan [
21], and Roman sarcophagi in Italy [
22].
However, the application of TLS in rural heritage and traditional village protection has seldom been discussed [
23]. The sensing of a whole village varies from the process of surveying single architectural buildings, which means that more conditions need to be considered comprehensively, including the characteristics and relationships between the measuring objects; the purpose of measurement, architectural elements, and contents; technical requirements; internal and external space; time; and cost. The collected sensing results can be applied in digital documentation, interpretation, protection, transformation, and redevelopment design. Specifically, the TLS data and built point cloud models of traditional villages can be used to compare the historical buildings inside a village, such as the difference in their architectural layout, internal areas, heights, decorations, and roof slopes, which will serve the future management, planning, and development of traditional villages, as well as rural tourism activities.
Point clouds are the main outputs of TLS, which refer to a set of coordinated points with geometric and colorimetric information. Point clouds are usually obtained from the process of photogrammetry and laser scanning surveys, which are broadly diffuse. Three-dimensional (3D) point clouds of cultural heritages and sites are quite important for the later modeling process because they can identify and differentiate structural and ornamental architectural components, map various stages of conservation and materials, and allow automatic recognition of comparable architectural features as preparation for building information modeling. Methods to classify point clouds have been discussed in previous research. For example, for the supervised categorization of point clouds for heritage, machine and deep learning methods are introduced [
24], as well as other image segmentation approaches [
25]. Other perspectives for the application of point clouds have also been discussed over the years, such as the reconstruction of structural surface models of heritage [
26], vault realization, and irregular surface modeling [
27]. However, to apply point clouds into rural heritage studies, there are more possibilities to discuss further. The creativity of this paper lies in its combination between point clouds and large-scale traditional villages, compared with single building modeling in the past.
Based on the discussion above, this paper takes the historical buildings in Fenghuang village as research subjects, introducing TLS and point cloud modeling as the main methodology. The survey method focuses on using TLS to acquire comprehensive architectural data of the diverse elements of historical buildings in Fenghuang, including five steps: designing the scanning scheme, obtaining site data, processing point clouds, and comparing the historical buildings. The internal and external parts of the buildings are both recorded by TLS, and the roof parts are scanned. The workflow in this paper, especially the scanning of roofs with TLS, is beneficial for overcoming the problems caused by insufficient ground information in traditional methods. After registration and denoising of point clouds, the point cloud models are built, which is an important process to update the documentation of historical buildings in Fenghuang village.
3. Results
3.1. Model Comparisons
After scanning all the 19 buildings in the village, the point models of these buildings were constructed. Then, these models were compared with each other within the three groups of the ancestral halls, school buildings, and Guangfu residences. In this section, some examples of the ancestral halls are used to explain the research results and their comparisons, including Wen Family Ancestral Hall, Songzhuang Ancestral Hall, Yichen Ancestral Hall, and Sisheng Ancestral Hall. They are analyzed from the perspectives of the architectural layout (internal spaces), decorations, heights, and roof slopes.
As seen in
Figure 7, it can be found that the width of the four ancestral halls is more than 10 m. Songzhuang Ancestral Hall is more spacious, with a width of 13.8 m, and its frontal courtyard is equipped with a private courtyard. The length of Songzhuang Ancestral Hall is 16.9 m. In comparison, the length of Wen Family Ancestral Hall is 33 m. The layouts of Yichen Ancestral Hall and Sisheng Ancestral Hall are relatively compact, with smaller sizes. Functionally speaking, the ancestral halls are generally composed of a first hall, a medium hall, and a memorial hall. Take Wen Family Ancestral Hall as an example, which is a typical compound house consisting of halls, rooms, corridors, and courtyards. The medium hall is located in the center, dedicated to holding ceremonies and meetings. The memorial hall is located in the furthest part of the yard, dedicated to worshipping ancestors (
Figure 8).
The point cloud model can also be used to analyze the decoration elements of the buildings for a detailed recording of the whole building. Roof decorations are characteristic of this village. The roof ridges of the ancestral halls are diversified. Most of them use decorative techniques, such as gray sculptures and colored paintings. Three types of roof ridges were observed in this village: boat ridge, antique ridge, and pottery ridge. The boat ridges are more common in history, the antique ridge is regarded as a symbol of wealth, while the pottery ridge was a new decoration that emerged in the 1900s (
Figure 9). Thus, from the building decorations, the different classes of the traditional buildings can be observed.
From the section view of the historical buildings, the height of every individual building can be compared, as well as the relationship between the building heights and the length of the building space. From
Figure 10, it can be seen that the architectural spatial sequence of these ancestral halls shows a rising trend, and the foundations of the four ancestral buildings are getting higher and higher from the frontal space to the end, which is in accordance with the psychological effect of creating a space for worshipping ancestors. According to calculations, the lengths of Wen Family Ancestral Hall, Songzhuang Ancestral Hall, Yichen Ancestral Hall, and Sisheng Ancestral Hall are as follows: 36 m, 19.5 m, 16.9 m, and 13.6 m. The ratios between the length and height are 4.39, 2.72, 3, and 2.09. Additionally, for each ancestral hall, the roof slope can be calculated by measuring the center distance of its front and back eaves (b) and the height of the internal beam (h0) (
Figure 11). The b/h0 ratio is obtained from the point cloud model. As a result, for the four memorial halls that belonged to the four families, the ratio values are 1/2.7, 1/3.1, 1/2.3, 1/1.4 (Wen Family, Songzhuang, Yichen, and Sisheng). The ratio values of the four frontal halls are, respectively, 1/3.0, 1/3.2, 1/2.4, and 1/3.1.
In conclusion, the spatial sequence of the ancestral halls presents an upward trend. The ground of the rear courtyard is usually higher than the frontal courtyard. In an ancestral hall building, the height of the memorial halls is usually higher than the frontal halls, showing a dominant position. The ancestral halls always have small scales and compact layouts. However, the hall buildings built later usually become larger in scale. The center distance between the front and rear eaves of the back hall is generally smaller than that of the frontal halls. Thus, the roof slope of memorial halls is generally smaller than the frontal roofs, and the back roofs are gentler than the frontal roofs.
3.2. BIM Creation and Analysis
After processing the point clouds, it is possible to integrate them into the BIM environment for further research and analysis. Take Sisheng Hall as an example. The BIM model is constructed and analyzed as follows. According to a previous site survey, the components of the architectural structure of this hall can be classified into roof, beam frame, wall, column, floor, decoration, door, and window. Based on this classification, a BIM family is created; namely, every part of the building’s point cloud is separately imported into BIM, combined as a database of architectural components, stored, and applied as BIM family files.
After modeling the building components, in the BIM application process, it is necessary to directly load the family library into the project. Then, the BIM family library can be evaluated by observing the form of the built family to check whether the naming of the family library conforms to the unified rules, whether the code is unique, and whether the connected points of the family model are appropriate. It is also necessary to check if the linkage between the parameters is effective or not. After checking and observing, it is clear that the 3D model of Sisheng Ancestral Hall follows the rules above. Thus, the model is officially uploaded into the BIM platform (
Figure 12).
Statistical functions can be fulfilled in these constructed models. Taking the model of Sisheng Hall as an example, a wall model integrates the structural level, thickness, and material, and other information obtained can be expressed both three-dimensionally and in the form of tables (
Figure 13). The Revit software of BIM also provides statistical functions. The building information can be quickly extracted and viewed in tables, which will greatly facilitate the process of restoration or heritage redevelopment.
With the constructed models, further heritage management and analysis can be performed with ease. For example, the inner heritage conditions, such as sunlight and ventilation, can be evaluated using Recap software simulations. Furthermore, the construction materials, style, and texture of the site may be assessed using color analysis of the model. As a technology that answers the rising requirement for the multidisciplinary knowledge base required for the management of life cycle operations of the growing inventory of cultural sites. BIM, combined with TLS, has played an important part in this trend. It is feasible to test, evaluate, and enhance a building design repeatedly using BIM with TLS. Building performance analysis is the name of this method (BPA). These models can contain both the geometric information and semantic properties of the building. As a result, design options may be used to estimate life cycle energy costs, yearly consumption, and potential energy savings for not only the project of Fenghuang village but also other heritage sites. More research focusing on this direction will be discussed in our future studies.
4. Conclusions and Discussion
The 19 historical buildings in Fenghuang village are regarded as research subjects in this paper, and TLS is the main methodology. The survey method focuses on using TLS to acquire comprehensive architectural data of the diverse elements of historical buildings in Fenghuang, including five steps: designing the scanning scheme, obtaining site data, processing the point clouds, and comparing the historical buildings. The internal and external parts of the buildings are both recorded by TLS, and the roof parts are scanned. After registration and denoising of point clouds, the point cloud models are built, which is an important process to update the documentation of historical buildings in Fenghuang village. Therefore, this project is meaningful for the future planning and protection of Fenghuang village. Significantly, it can also be a reference for other traditional villages with complex structures, decorations, and spatial compositions, as well as for analyzing the relationship between the buildings in traditional villages.
Compared with other scanning methods or other traditional heritage survey methods (such as total station), the workflow proposed in this paper has its advantages when applied to other cases. TLS for traditional village studies has seldom been discussed; however, as explained above, all the characteristics of TLS (simple, faster, efficient operation, less physical damage to heritage objects) can be reflected in this case study. Different from single building modeling, coordination between different objects in the villages is considered in this project, as well as the method of scanning the roof parts of some high buildings. Additionally, due to the similarity of Chinese historical buildings, the BIM library built in this paper can be a good source to share with other scholars to improve the communication of heritage modeling in Chinese academia, as well as similar cases in other countries.
However, improving the efficiency of modeling with a standardized modular method remains a challenge, especially for some large-scale heritages. Currently, more research is focusing on the standardized method for the creation of BIM objects, furthering the discussion of defining BIM libraries, ensuring the coherence and completeness of heritage data and documentation [
32]. Thus, the verification of coherence, information completeness, and the interoperability of village modeling remains a problem awaiting solution in further studies, as well as the case of Fenghuang village.
In future research, the following aspects can be highlighted to improve the application process of TLS and point clouds in traditional villages. (1) All 360 historical buildings are awaiting identification and further research. Thus, it is urgent to cooperate more with local scholars and institutions to carry out the survey and modeling plan for the whole village to strengthen multiprofessional cooperation with computer sciences. (2) Based on the point clouds, BIM smart models can be constructed to improve component-based 3D visualization. The BIM model will provide more accurate and detailed information for the protection of ancient buildings. More quantitative analysis can be performed with the BIM model, such as solar and wind simulation [
33]. (3) Introduce the GIS technology to realize the application of TLS in a wider context. For example, the spatial arrangement of building clusters can be analyzed by GIS tools, and future tourism and heritage planning can be proposed with the help of GIS analysis [
34]. (4) More digital technologies such as 3D printing, big data collection, and AR/VR can be combined with point clouds to enhance the immersive tourism experience in traditional villages [
35].