Special Issue on “CFD Based Researches and Applications for Fluid Machinery and Fluid Device”
Author Contributions
Funding
Conflicts of Interest
References
- Zhang, X.; Zhang, Y.; Lu, C. Flow and noise characteristics of centrifugal fan in low pressure environment. Processes 2020, 8, 985. [Google Scholar] [CrossRef]
- Luo, Y.; Fan, Y.; Han, Y.; Zhang, W.; Acheaw, E. Research on the dynamic characteristics of mechanical seal under different extrusion fault degrees. Processes 2020, 8, 1057. [Google Scholar] [CrossRef]
- Yu, L.; Zhang, H.; Chen, H.; Zuo, Z.; Liu, S. Numerical study on the influence of step casing on cavitating flows and instabilities in inducers with equal and varying pitches. Processes 2020, 8, 1103. [Google Scholar] [CrossRef]
- Xie, H.; Song, M.; Yang, B. Research on the application of partial similarity for a 1-1/2 axial compressor. Processes 2020, 8, 1121. [Google Scholar] [CrossRef]
- Wang, W.; Li, Y.; Osman, M.K.; Yuan, S.; Zhang, B.; Liu, J. Multi-condition optimization of cavitation performance on a double-suction centrifugal pump based on ANN and NSGA-II. Processes 2020, 8, 1124. [Google Scholar] [CrossRef]
- Zhang, S.; Yang, B.; Xie, H.; Song, M. Applications of an improved aerodynamic optimization method on a low Reynolds number cascade. Processes 2020, 8, 1150. [Google Scholar] [CrossRef]
- Ma, S.-B.; Kim, S.; Kim, J.-H. Optimization design of a two-vane pump for wastewater treatment using machine-learning-based surrogate modeling. Processes 2020, 8, 1170. [Google Scholar] [CrossRef]
- Wang, X.; Kuang, K.; Wu, Z.; Yang, J. Numerical simulation of axial vortex in a centrifugal pump as turbine with S-blade impeller. Processes 2020, 8, 1192. [Google Scholar] [CrossRef]
- Li, Q.; Ma, X.; Wu, P.; Yang, S.; Huang, B.; Wu, D. Study on the transient characteristics of the centrifugal pump during the startup period with assisted valve. Processes 2020, 8, 1241. [Google Scholar] [CrossRef]
- Ahn, S.-Y.; Kim, K.-Y. Thermal performance of T-shaped obstacles in a solar air heater. Processes 2020, 8, 1305. [Google Scholar] [CrossRef]
- Kim, W.-Y.; Senguttuvan, S.; Kim, S.-M. Effect of rotor spacing and duct diffusion angle on the aerodynamic performances of a counter-rotating ducted fan in hover mode. Processes 2020, 8, 1338. [Google Scholar] [CrossRef]
- Lei, Y.; Huang, Y.; Wang, H. Aerodynamic performance of an octorotor SUAV with different rotor spacing in hover. Processes 2020, 8, 1364. [Google Scholar] [CrossRef]
- Shrestha, U.; Choi, Y.-D. A CFD-based shape design optimization process of fixed flow passages in a Francis hydro turbine. Processes 2020, 8, 1392. [Google Scholar] [CrossRef]
- Ding, H.; Chang, T.; Lin, F. The influence of the blade outlet angle on the flow field and pressure pulsation in a centrifugal fan. Processes 2020, 8, 1422. [Google Scholar] [CrossRef]
- Rui, X.; Lin, L.; Wang, J.; Ye, X.; He, H.; Zhang, W.; Zhu, Z. Experimental and comparative RANS/URANS investigations on the effect of radius of volute tongue on the aerodynamics and aeroacoustics of a Sirocco fan. Processes 2020, 8, 1442. [Google Scholar] [CrossRef]
- Baek, S.I.; Ahn, J. Large eddy simulation of film cooling with triple holes: Injectant behavior and adiabatic film-cooling effectiveness. Processes 2020, 8, 1443. [Google Scholar] [CrossRef]
- Song, M.; Xie, H.; Yang, B.; Zhang, S. Influence of tip clearance on flow characteristics of axial compressor. Processes 2020, 8, 1445. [Google Scholar] [CrossRef]
- Hur, M.S.; Lee, S.I.; Moon, S.W.; Kim, T.S.; Kwak, J.S.; Kim, D.H.; Jung, I.Y. Effect of clearance and cavity geometries on leakage performance of a stepped labyrinth seal. Processes 2020, 8, 1496. [Google Scholar] [CrossRef]
- Li, Y.; Zheng, Y.; Meng, F.; Osman, M.K. The effect of root clearance on mechanical energy dissipation for axial flow pump device based on entropy production. Processes 2020, 8, 1506. [Google Scholar] [CrossRef]
- Gao, X.; Zhao, T.; Shi, W.; Zhang, D.; Shi, Y.; Zhou, L.; Chang, H. Numerical investigation of an open-design vortex pump with different blade wrap angles of impeller. Processes 2020, 8, 1601. [Google Scholar] [CrossRef]
- Feng, X.; Su, W.; Ma, Y.; Wang, L.; Tan, H. Numerical and experimental study on waviness mechanical seal of reactor coolant pump. Processes 2020, 8, 1611. [Google Scholar] [CrossRef]
- Benišek, M.H.; Čantrak, Đ.S.; Ilić, D.B.; Janković, N.Z. New design of the reversible jet fan. Processes 2020, 8, 1671. [Google Scholar] [CrossRef]
- Stelmach, J.; Kuncewicz, C.; Szufa, S.; Jirout, T.; Rieger, F. The influence of hydrodynamic changes in a system with a pitched blade turbine on mixing power. Processes 2021, 9, 68. [Google Scholar] [CrossRef]
- Wang, M.; Li, Y.; Yuan, J.; Osman, F.K. Matching optimization of a mixed flow pump impeller and diffuser based on the inverse design method. Processes 2021, 9, 260. [Google Scholar] [CrossRef]
- Rakibuzzaman, M.; Suh, S.-H.; Kim, H.-H.; Ryu, Y.; Kim, K.Y. Development of a hydropower turbine using seawater from a fish farm. Processes 2021, 9, 266. [Google Scholar] [CrossRef]
- Wang, X.; Fan, H.; Liu, B. Optimization control on the mixed free-surface-pressurized flow in a hydropower station. Processes 2021, 9, 320. [Google Scholar] [CrossRef]
- Park, M.-C.; Ma, S.-B.; Kim, K.-Y. Optimization of a wavy microchannel heat sink with grooves. Processes 2021, 9, 373. [Google Scholar] [CrossRef]
- Chen, F.; Bi, H.; Ahn, S.-H.; Mao, Z.; Luo, Y.; Wang, Z. Investigation on dynamic stresses of pump-turbine runner during start up in turbine mode. Processes 2021, 9, 499. [Google Scholar] [CrossRef]
- Portal-Porras, K.; Fernandez-Gamiz, U.; Aramendia, I.; Teso-Fz-Betoño, D.; Zulueta, E. Testing the accuracy of the cell-set model applied on vane-type sub-boundary layer vortex generators. Processes 2021, 9, 503. [Google Scholar] [CrossRef]
- Shamsuddeen, M.M.; Ma, S.-B.; Kim, S.; Yoon, J.-H.; Lee, K.-H.; Jung, C.; Kim, J.-H. Effect of an inducer-type guide vane on hydraulic losses at the inter-stage flow passage of a multistage centrifugal pump. Processes 2021, 9, 526. [Google Scholar] [CrossRef]
- Ye, J.; Salem, S.; Wang, J.; Wang, Y.; Du, Z.; Wang, W. Effects of micro-tab on the lift enhancement of airfoil S-809 with trailing-edge flap. Processes 2021, 9, 547. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
Kim, J.-H.; Kim, S.-M.; Choi, M.; Tan, L.; Huang, B.; Pei, J. Special Issue on “CFD Based Researches and Applications for Fluid Machinery and Fluid Device”. Processes 2021, 9, 1137. https://doi.org/10.3390/pr9071137
Kim J-H, Kim S-M, Choi M, Tan L, Huang B, Pei J. Special Issue on “CFD Based Researches and Applications for Fluid Machinery and Fluid Device”. Processes. 2021; 9(7):1137. https://doi.org/10.3390/pr9071137
Chicago/Turabian StyleKim, Jin-Hyuk, Sung-Min Kim, Minsuk Choi, Lei Tan, Bin Huang, and Ji Pei. 2021. "Special Issue on “CFD Based Researches and Applications for Fluid Machinery and Fluid Device”" Processes 9, no. 7: 1137. https://doi.org/10.3390/pr9071137