Next Article in Journal
Smart Insole Sensor for vGRF Measurement
Previous Article in Journal
Lab on Paper Sensor for Explosive Materials Detection
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Abstract

Portable, Highly Sensitive and Selective Electrochemical Biosensors for SARS-CoV-2 Detection †

Department for Nanostructured Materials, Jožef Stefan Institute, Jamova Cesta 39, 1000 Ljubljana, Slovenia
Presented at the 9th International Symposium on Sensor Science, Warsaw, Poland, 20–22 June 2022.
Eng. Proc. 2022, 21(1), 46; https://doi.org/10.3390/engproc2022021046
Published: 31 August 2022
(This article belongs to the Proceedings of The 9th International Symposium on Sensor Science)

Abstract

:
Infectious diseases, such as COVID-19, continue to cause an enormous burden of death and disability in developing countries, and there is an urgent need to better understand these infectious pathogens and develop ways to control their spread. We have developed a new type of testing strategy based on electrochemical biosensing aspects, created using a microfluidic detection platform for rapid, sensitive, and specific detection of infectious SARS-CoV-2 and its variants. The target compounds, i.e., SARS-CoV-2 variants, were selected due to the current worldwide outbreak; however, the fabricated biosensing aspect may be expanded to future emerging pathogens by undemanding modifications. The biosensor platform is based on screen-printed electrodes (SPEs), modified with nanostructured polystyrene (PS)/polyaniline (PANI)-Au NP composites. The surface of modified-SPEs is later immobilized using different representative receptor elements, i.e., specific viral antibodies. Tackling PS/PANI-Au NP composites on the nanoscale enables us to exploit its outstanding conductivity, biocompatibility, and high surface area which facilitate the loading of a huge amount of viral receptor elements (Ab), thus resulting in high sensitivity, specificity, and low detection limits (i.e., at attomolar concentration levels). Such a construction is able to translate this specific covalent interaction (Ab) with its corresponding binding viral target, i.e., receptor-binding domain ((RBD) of spike (S) glycoprotein) into a measurable, concentration-dependent electrochemical response. By creating an electrochemical readout, data enable qualitative and quantitative analysis. The fabricated system represents a low-cost and efficient alternative to conventional assays for testing as it offers a simple in-situ method of analysis in much shorter time frames. Its feasible design is easy to use and can be operated by patients themselves using simple samples such as saliva, thus allowing population-scale screening.

Funding

This research was funded by the Slovenian Research Agency (ARRS) through the additional P2-0084 research programme funding related to the COVID-19 pandemic.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Acknowledgments

This study was also supported by the ARRS through the Z2-3206 project, of which this investigation forms a part.

Conflicts of Interest

The author declares no conflict of interest.
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Trafela, Š. Portable, Highly Sensitive and Selective Electrochemical Biosensors for SARS-CoV-2 Detection. Eng. Proc. 2022, 21, 46. https://doi.org/10.3390/engproc2022021046

AMA Style

Trafela Š. Portable, Highly Sensitive and Selective Electrochemical Biosensors for SARS-CoV-2 Detection. Engineering Proceedings. 2022; 21(1):46. https://doi.org/10.3390/engproc2022021046

Chicago/Turabian Style

Trafela, Špela. 2022. "Portable, Highly Sensitive and Selective Electrochemical Biosensors for SARS-CoV-2 Detection" Engineering Proceedings 21, no. 1: 46. https://doi.org/10.3390/engproc2022021046

Article Metrics

Back to TopTop