1. “Informed Finite Element Modelling for Wire and Arc Additively Manufactured Metallics—A Case Study on Modular Building Connections”
by Madhushan Dissanayake, Thadshajini Suntharalingam, Konstantinos Daniel Tsavdaridis, Keerthan Poologanathan and Gatheeshgar Perampalam
Buildings 2022, 12(1), 5; https://doi.org/10.3390/buildings12010005
Available online: https://www.mdpi.com/2075-5309/12/1/5

2. “A Multifunctional Solution for Simultaneous Sound Insulation and Acoustic Conditioning—An Example of Application in a Radio Studio”
by Juan C. Rodríguez, Jesús Alb and Romina del Rey
Buildings 2022, 12(2), 123; https://doi.org/10.3390/buildings12020123
Available online: https://www.mdpi.com/2075-5309/12/2/123

3. “Comparison of the Experimental Measurement Methods for Building Envelope Thermal Transmittance”
by Xinrui Lu and Ali M. Memari
Buildings 2022, 12(3), 282; https://doi.org/10.3390/buildings12030282
Available online: https://www.mdpi.com/2075-5309/12/3/282

4. “Solar Performance Metrics in Urban Planning: A Review and Taxonomy”
by Agnieszka Czachura, Jouri Kanters, Niko Gentile and Maria Wall
Buildings 2022, 12(4), 393; https://doi.org/10.3390/buildings12040393
Available online: https://www.mdpi.com/2075-5309/12/4/393

5. “A Study on Daylighting Performance of Split Louver with Simplified Parametric Control”
by Muna Alsukkar, Mingke Hu, Mohamed Gadi and Yuehong Su
Buildings 2022, 12(5), 594; https://doi.org/10.3390/buildings12050594
Available online: https://www.mdpi.com/2075-5309/12/5/594

6. “Dynamic Testing in Support of the Seismic Assessment of a Century Old Masonry Building Complex”
by Michele Dilena, Marta Fedele Dell’Oste, Alessandra Gubana, Antonino Morassi and Eric Puntel
Buildings 2022, 12(6), 805; https://doi.org/10.3390/buildings12060805
Available online: https://www.mdpi.com/2075-5309/12/6/805

7. “Developing Heat Mitigation Strategies in the Urban Environment of Sydney, Australia”
by Hamed Reza Heshmat Mohajer, Lan Ding and Mattheos Santamouris
Buildings 2022, 12(7), 903; https://doi.org/10.3390/buildings12070903
Available online: https://www.mdpi.com/2075-5309/12/7/903

8. “Rheometry for Concrete 3D Printing: A Review and an Experimental Comparison”
by Roshan Jayathilakage, Pathmanathan Rajeev and Jay Sanjayan
Buildings 2022, 12(8), 1190; https://doi.org/10.3390/buildings12081190
Available online: https://www.mdpi.com/2075-5309/12/8/1190

9. “Mechanical Characterization of Masonry Built with iCEBs of Granite Residual Soils with Cement–Lime Stabilization”
by Ana Briga-Sá, Rui A. Silva, Norma Gaibor, Vânia Neiva, Dinis Leitão and Tiago Miranda
Buildings 2022, 12(9), 1419; https://doi.org/10.3390/buildings12091419
Available online: https://www.mdpi.com/2075-5309/12/9/1419

10. “Numerical Investigation on Fire Performance of LSF and Steel Modular Floor Panels”
by Dilini Perera, Irindu R Upasiri, Keerthan Poologanathan, Kate O’Grady, Brabha Nagaratnam, Elilarasi Kanthasamy and Heshachanaa Rajanayagam
Buildings 2022, 12(10), 1721; https://doi.org/10.3390/buildings12101721
Available online: https://www.mdpi.com/2075-5309/12/10/1721

11. “Comparative Analysis of Resource and Climate Footprints for Different Heating Systems in Building Information Modeling”
by Husam Sameer, Guillaume Behem, Clemens Mostert and Stefan Bringezu
Buildings 2022, 12(11), 1824; https://doi.org/10.3390/buildings12111824
Available online: https://www.mdpi.com/2075-5309/12/11/1824

12. “Retrofit of Building Façade Using Precast Sandwich Panel: An Integrated Thermal and Environmental Assessment on BIM-Based LCA”
by Quddus Tushar, Guomin Zhang, Muhammed A. Bhuiyan, Satheeskumar Navaratnam, Filippo Giustozzi and Lei Hou
Buildings 2022, 12(12), 2098; https://doi.org/10.3390/buildings12122098
Available online: https://www.mdpi.com/2075-5309/12/12/2098