3 February 2023
9th Applied Sciences Webinar | Additive Manufacturing and Topology Optimization of Microstructures, 7 February 2023
Date: 7 February 2023
Time: 10:00 a.m. CET | 4:00 a.m. EST | 5:00 p.m. CST Asia | 11:00 a.m. EET
Webinar ID: 840 2871 8035
Webinar Secretariat: [email protected]
Webinar Website: https://applsci-9.sciforum.net/
Topology optimization is the modern approach to a flexible optimal design of structures and microstructures. Additive manufacturing, also known as rapid prototyping or 3D printing, makes the creation of structures of any shape and topology, including microstructures, feasible. Exchange of information between the two disciplines, state-of-the-art development, and expected steps for the near future are the topics of the present webinar.
Chairs:
|
Prof. Dr. Georgios E. Stavroulakis Institute of Computational Mechanics and Optimization, School of Production Engineering and Management, Technical University of Crete, Chania, Greece |
|
Dr. Loucas Papadakis Department of Mechanical Engineering, Frederick University, Nicosia, Cyprus |
|
Dr. Ioannis Ntintakis School of Engineering, Department of Mechanical Engineering, Hellenic Mediterranean University, Iraklion, Greece |
Invited Speakers:
|
Dr. Nikolaos Karathanasopoulos New York University, Abu Dhabi Campus & Tandon School of Engineering, UAE & USA |
|
Dr. Demetris Photiou Simlead Ltd, Nicosia, Cyprus |
|
Dr. Nikolaos Kladovasilakis Digital Manufacturing and Materials Characterization Laboratory, International Hellenic University, School of Science and Technology, Thessaloniki, Greece |
Relevant Special Issue:
“Additive Manufacturing: Topology Optimization and Cellular Microstructures”
Edited by Prof. Dr. Georgios E. Stavroulakis, Dr. Loucas Papadakis, and Dr. Ioannis Ntintakis
Available online: https://www.mdpi.com/journal/applsci/special_issues/cellular_microstructures
Sponsors and Partners:
