Reviewer Board
Members of the reviewer board are selected from all Materials reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Kotsugi Laboratory, Faculty of Advanced Engineering, Tokyo University of Science, 6-3-1, Niijuku, Katsushika, Tokyo 125-8585, Japan
Interests: first principal calculation; density functional theory; 2D-materials; metal oxides; perovskite solar cell; fullerene; non-covalent interactions
Interests: first principal calculation; density functional theory; 2D-materials; metal oxides; perovskite solar cell; fullerene; non-covalent interactions
Faculty of Sciences and Technology, Azores University, 9501-801 Ponta Delgada, Portugal
Interests: materials physics and nanotechnology; thin films; coating technologies; surface materials characterization; optical characterization of rare-earths doped optically active materials; waveguides and optical amplifiers; functionalized surfaces for advanced
Interests: materials physics and nanotechnology; thin films; coating technologies; surface materials characterization; optical characterization of rare-earths doped optically active materials; waveguides and optical amplifiers; functionalized surfaces for advanced
Institute for testing of materials IMS, Bulevar vojvode Mišića 43, Belgrade, Serbia
Interests: raw clay; mineralogy; firing behavior; traditional ceramics; waste; geopolymer; optimization; mathematical modeling; statitical analysis; sediments; water pollution; socio-economic analysis
Interests: raw clay; mineralogy; firing behavior; traditional ceramics; waste; geopolymer; optimization; mathematical modeling; statitical analysis; sediments; water pollution; socio-economic analysis
Department Estomatologia, Facultad de Odontología, Universidad de Sevilla, 41009 Sevilla, Spain
Interests: dental implants; titanium; implant dentistry; surface implants; regenerative materials for oral surgery; bone substitutes in dentistry
Interests: dental implants; titanium; implant dentistry; surface implants; regenerative materials for oral surgery; bone substitutes in dentistry
V-Research GmbH, Dornbirn, Austria
Interests: tribology; friction; wear; surface coatings; surface engineering; advanced materials; material characterization; mechanical testing
Interests: tribology; friction; wear; surface coatings; surface engineering; advanced materials; material characterization; mechanical testing
Technological Department, University Catholic of Ávila, C/Canteros, s/n, 05005 Avila, Spain
Interests: virtual reality; mechanical properties; fatigue; metallography; fracture mechanics; material characterization; materials testing; fractography; finite element analysis; mechanical testing; mechanical behavior of materials; failure analysis; corrosion science; stress and strain analysis; technology enhanced learning; virtual learning environments
Interests: virtual reality; mechanical properties; fatigue; metallography; fracture mechanics; material characterization; materials testing; fractography; finite element analysis; mechanical testing; mechanical behavior of materials; failure analysis; corrosion science; stress and strain analysis; technology enhanced learning; virtual learning environments
University of eCampus
Interests: masonry and RC structures; RC beams flexural/shear/torsion strengthening; SRG/FRCM systems; masonry strengthening; numerical and analytical model
Interests: masonry and RC structures; RC beams flexural/shear/torsion strengthening; SRG/FRCM systems; masonry strengthening; numerical and analytical model
Dipartimento di Chimica, Materiali e Ingegneria Chimica "Giulio Natta", Politecnico di Milano, Milan, Italy
Interests: applied electrochemistry; electrochemical energy storage; electrochemical capacitors; supercapacitors; capacitive deionization; aqueous rechargeable batteries; anodic oxide; electrodeposition; thin film deposition
Interests: applied electrochemistry; electrochemical energy storage; electrochemical capacitors; supercapacitors; capacitive deionization; aqueous rechargeable batteries; anodic oxide; electrodeposition; thin film deposition
School of Civil Engineering, Pontificia Universidad Católica de Valparaíso, Valparaíso 2340000, Chile
Interests: structural dynamics; Timoshenko beams; steel design
Interests: structural dynamics; Timoshenko beams; steel design
Gheorghe Asachi Technical Unversity from Iasi
Technical Science Academy of Romania
Interests: biomaterials; nanomaterials; functional materials; environmental management; energy; medical devices; metallic alloys; alloys; surface engineering; nanofluids; characterization; geopolymer; expert system; heating equipment; testing and material expertise; tissue-implant interaction phenomena; air, soil and water pollution; furnaces materials
Interests: biomaterials; nanomaterials; functional materials; environmental management; energy; medical devices; metallic alloys; alloys; surface engineering; nanofluids; characterization; geopolymer; expert system; heating equipment; testing and material expertise; tissue-implant interaction phenomena; air, soil and water pollution; furnaces materials
Soft Matter Physics, Institut für Physik und Astronomie, Universität Potsdam
Interests: solar cells; electroluminescence; organic electronics; solar radiation; photodetectors; recombination dynamics of organic photovoltaic devices
Interests: solar cells; electroluminescence; organic electronics; solar radiation; photodetectors; recombination dynamics of organic photovoltaic devices
Institute of Physical and Organic Chemistry, Southern Federal University, Rostov-on-Don, Russia
Interests: nanostructured materials; solid state chemistry; crystal chemistry; solid state electrochemistry; powder X-ray diffraction; PEMFCs; platinum catatalysts
Interests: nanostructured materials; solid state chemistry; crystal chemistry; solid state electrochemistry; powder X-ray diffraction; PEMFCs; platinum catatalysts
Kotelnikov Institute of Radio Engineering and Electronics of the Russian Academy of Sciences, 125009 Moscow, Russia
Interests: solid state physics; superconductivity; phase transition; ferroelectric; electromagnetic waves; shape memory effect; ferromagnetic; nanomanipulation; microwave and millimeter waves; spinwaves; nanogripper; nanoaccembling
Interests: solid state physics; superconductivity; phase transition; ferroelectric; electromagnetic waves; shape memory effect; ferromagnetic; nanomanipulation; microwave and millimeter waves; spinwaves; nanogripper; nanoaccembling
LabTeh d.o.o. Osijek, Ulica borova 3, 31000 Osijek, Croatia
Interests: building materials; technology of concrete; masonary; masonary structures; Materials Testing; laboratory testing; soil testing; aggregate testing; quality control; hardened concrete testing
Interests: building materials; technology of concrete; masonary; masonary structures; Materials Testing; laboratory testing; soil testing; aggregate testing; quality control; hardened concrete testing
Walker Department of Mechanical Engineering, The University of Texas at Austin, Austin, TX, USA
Interests: ceramic; composites; 3D printing; additive manufacturing; metal; ceramic matrix composite materials
Interests: ceramic; composites; 3D printing; additive manufacturing; metal; ceramic matrix composite materials
NCFL-ICTAS, 1991 Kraft Dr, Blacksburg, VA 24061, USA
Interests: nanomaterials; nanomechanics; crystal defects; physics of materials; experimental mechanics; molecular sciences; electron microscopy
Interests: nanomaterials; nanomechanics; crystal defects; physics of materials; experimental mechanics; molecular sciences; electron microscopy
Yangzhou University, Yangzhou, China
Interests: biopolymers; hydrogels; sensors; nanomaterials
Interests: biopolymers; hydrogels; sensors; nanomaterials
Tianjin Key Laboratory of Building Green Functional Materials, School of Materials Science and Engineering, Tianjin Chengjian University, Tianjin 300384, China
Interests: concrete; utilization of solid waste in building materials; durability of concrete
Interests: concrete; utilization of solid waste in building materials; durability of concrete
Department of Civil Engineering and Smart Cities, College of Engineering, Shantou University, Shantou 515063, China
Interests: 3D printing; heat transfer; composite; aerospace; metamaterials; mechanical properties; thermal conduction
Interests: 3D printing; heat transfer; composite; aerospace; metamaterials; mechanical properties; thermal conduction
Center of Dental Medicine, Oral Biotechnology & Bioengineering/MKG, University of Zurich, Plattenstrasse 11, CH-8032 Zurich, Switzerland
Interests: hydrogels; additive manufacturing; osteoinduction; osteoconduction; bone substitute materials; gtr/gbr membranes; delivery of epigenetically active small chemicals; delivery of BMPs
Interests: hydrogels; additive manufacturing; osteoinduction; osteoconduction; bone substitute materials; gtr/gbr membranes; delivery of epigenetically active small chemicals; delivery of BMPs
Chair of Construction Materials and Biomaterials, Institute of Materials Engineering, Kazimierz Wielki University, 85-064 Bydgoszcz, Poland
Interests: orthopaedic biomaterials; engineering of bone–implant interface; scaffolds for bone reconstruction; surface modification and functionalization of biomaterials
Interests: orthopaedic biomaterials; engineering of bone–implant interface; scaffolds for bone reconstruction; surface modification and functionalization of biomaterials
Department of Geotechnical Engineering, Civil Engineering and Architecture Faculty, Lublin University of Technology, Lublin, Poland
Interests: sustainability; waste recycling; materials engineering; industrial materials; asphalt; warm mix asphalt; waste of mineral processing; rheological of asphalt binders; road application
Interests: sustainability; waste recycling; materials engineering; industrial materials; asphalt; warm mix asphalt; waste of mineral processing; rheological of asphalt binders; road application
Department of Building Materials Engineering, Faculty of Civil Engineering, Warsaw University of Technology, Warsaw, Poland
Interests: advanced concrete technology; mineral binders - cements and other; durability of the concrete structures; chemical resistance of concrete; carbonation; curing of concrete; superabsorbent polymers in concrete; precast concrete elements production; waste and by-products use in mineral building materials production; recykling in concrete technology
Interests: advanced concrete technology; mineral binders - cements and other; durability of the concrete structures; chemical resistance of concrete; carbonation; curing of concrete; superabsorbent polymers in concrete; precast concrete elements production; waste and by-products use in mineral building materials production; recykling in concrete technology
School of Materials Science and Engineering, University of Jinan, No. 336, West Road of Nanxinzhuang, Jinan 250022, China
Interests: mechanical properties; metallic alloys; fracture; deformation; strain; dislocation; laminated composites
Interests: mechanical properties; metallic alloys; fracture; deformation; strain; dislocation; laminated composites
Department of Materials Engineering, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656, Japan
Interests: metallic corrosion; NDT; electrochemical measurement; acoustic emission; pitting corrosion; stress corrosion cracking; steel; Mg alloy; Al alloy
Interests: metallic corrosion; NDT; electrochemical measurement; acoustic emission; pitting corrosion; stress corrosion cracking; steel; Mg alloy; Al alloy
Key Laboratory of Advanced Manufacturing and Intelligent Technology, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China
Interests: inertial measurement unit (imu) sensors; intelligent manufacturing
Interests: inertial measurement unit (imu) sensors; intelligent manufacturing
Department of Material Science, Fudan University, Shanghai, China
Interests: energy storage; hydrogen storage; metal hydrides; batteries; Li-ion batteries; Li-metal anodes; photo-thermal
Interests: energy storage; hydrogen storage; metal hydrides; batteries; Li-ion batteries; Li-metal anodes; photo-thermal
College of Chemistry and Chemical Engineering, Hubei University, Wuhan, China
Interests: 2D materials; chemical vapor deposition; electronics and optoelectronics; density function theory
Interests: 2D materials; chemical vapor deposition; electronics and optoelectronics; density function theory
School of Materials Science and Engineering, Chang'an Technology, China
Interests: asphalt pavement, bitumen, pavement design
Interests: asphalt pavement, bitumen, pavement design
1. School of Engineering, Case Western Reserve University, Cleveland, OH, USA
2. Institute of Mechanical Engineering, Hohai University, Nanjing, China
Interests: hydraulic; SHM; concrete; concrete structure; nondestructive testing; ground-penetrating radar (GPR); ultrasonic testing; structural health monitoring; support vector machine (SVM); deep learning; artificial intelligence
2. Institute of Mechanical Engineering, Hohai University, Nanjing, China
Interests: hydraulic; SHM; concrete; concrete structure; nondestructive testing; ground-penetrating radar (GPR); ultrasonic testing; structural health monitoring; support vector machine (SVM); deep learning; artificial intelligence
