Reviewer Board
Members of the reviewer board are selected from all Metals reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Department of Welding Engineering, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A Str., 44-100 Gliwice, Poland
Interests: surface engineering; nano-structural materials; abrasive wear; erosive wear; oxidation; thermal shock; welding; hardfacing; thermal spraying; explosive cladding process; soldering; brazing; thermal cutting and anti-corrosion protection methods
Interests: surface engineering; nano-structural materials; abrasive wear; erosive wear; oxidation; thermal shock; welding; hardfacing; thermal spraying; explosive cladding process; soldering; brazing; thermal cutting and anti-corrosion protection methods
Department of Mechanical Engineering, ISEP–School of Engineering, Polytechnic of Porto, 4200-072 Porto, Portugal
Interests: coatings; materials; metals; materials characterization; wear; microscopy; welding; machining; manufacturing processes; composites; industrial management
Interests: coatings; materials; metals; materials characterization; wear; microscopy; welding; machining; manufacturing processes; composites; industrial management
Department of Physics and Materials Science, University of Memphis, Memphis, TN 38152, USA
Interests: MEMS; magnetic materials; nanomaterials; plasma physics; permanent magnets; microplasma; condense mater physics; hard soft ferrites
Interests: MEMS; magnetic materials; nanomaterials; plasma physics; permanent magnets; microplasma; condense mater physics; hard soft ferrites
Institute of Resource Ecology, Structual Materials Division (FWOM), Helmholtz-Zentrum Dresden - Rossendorf (HZDR), Bautzner Landstr. 400, 01328 Dresden, Germany
Interests: microstructure and mechanical properties of materials; quasi-static fracture toughness testing; master curve testing to determine reference temperature; fractography and cracking mechanisms; materials characterization using SEM and EBSD; Oxide dispersion strengthened (ODS) steels; ferritic/marternsitic 9Cr steels; low alloy reactor pressure vessel (RPV) steels; influence of neutron irradiation on mechanical behaviour of materials; Tensile Testing; small punch testing; nano-indentation testing
Interests: microstructure and mechanical properties of materials; quasi-static fracture toughness testing; master curve testing to determine reference temperature; fractography and cracking mechanisms; materials characterization using SEM and EBSD; Oxide dispersion strengthened (ODS) steels; ferritic/marternsitic 9Cr steels; low alloy reactor pressure vessel (RPV) steels; influence of neutron irradiation on mechanical behaviour of materials; Tensile Testing; small punch testing; nano-indentation testing
Department of Electrical and Computer Engineering, Oakland University, Rochester, MI 48309, USA
Interests: modeling, control and quality monitoring (such as nugget size estimation, reduction of expulsion, indentation, fit-up error, etc.) of resistance spot welding of metals; adaptive signal processing and control; system modeling and system identification; digital signal and image processing; data compression; pattern recognition
Interests: modeling, control and quality monitoring (such as nugget size estimation, reduction of expulsion, indentation, fit-up error, etc.) of resistance spot welding of metals; adaptive signal processing and control; system modeling and system identification; digital signal and image processing; data compression; pattern recognition
Advanced Steel Research Centre, WMG, University of Warwick, Coventry CV4 7AL, UK
Interests: steels; microstructure and microstructural development during processing (casting and rolling); electromagnetic sensors for characterisation of steel microstructure; thermo-mechanical processing; relationship between steel microstructure-processing-properties
Interests: steels; microstructure and microstructural development during processing (casting and rolling); electromagnetic sensors for characterisation of steel microstructure; thermo-mechanical processing; relationship between steel microstructure-processing-properties
ICMA (CSIC-University of Zaragoza), María de Luna, 3, 50018 Zaragoza, Spain
Interests: laser processing; laser ablation; surface nanostructuring; nanoparticles; nanostructures
Interests: laser processing; laser ablation; surface nanostructuring; nanoparticles; nanostructures
Department of Structures for Engineering and Architecture, University of Naples Federico II, Via Forno Vecchio 36, 80134 Naples, Italy
Interests: steel structures; steel joints; seismic design; robustness; stability
Interests: steel structures; steel joints; seismic design; robustness; stability
Univ Toulouse, ENIT, LGP, 47 Ave Azereix,BP 1629, F-65016 Tarbes, France
Interests: ceramics; raman spectroscopy; tribology; friction; wear; metal matrix composites; graphite; bearing; ceramic matrix composites; electronic microscopy; graphite intercalation compounds
Interests: ceramics; raman spectroscopy; tribology; friction; wear; metal matrix composites; graphite; bearing; ceramic matrix composites; electronic microscopy; graphite intercalation compounds
School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510641, China
Interests: large strain machining; plastic flow machining; chip recycling; finite element analysis; Metal cutting
Interests: large strain machining; plastic flow machining; chip recycling; finite element analysis; Metal cutting
Regional Technological Institute, University of West Bohemia, Plzen, Czech Republic
Interests: fatigue; mechanical properties; Mechanical Testing; material characterization
Interests: fatigue; mechanical properties; Mechanical Testing; material characterization
Dipartimento di Ingegneria, Università di Perugia, Via G. Duranti 93, 06125 Perugia, Italy
Interests: steel; light alloys; Physical metallurgy
Interests: steel; light alloys; Physical metallurgy
Department of Engineering Materials and Welding, Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia
Interests: hydrogen embrittlement; corrosion; materials characterization; environmentally assisted cracking; mechanical behavior of materials; materials science; steel; metals and alloys
Interests: hydrogen embrittlement; corrosion; materials characterization; environmentally assisted cracking; mechanical behavior of materials; materials science; steel; metals and alloys
Institute of Electrical Engineering and Electronics, Poznan University of Technology, 60-965 Poznań, Poland
Interests: acoustic emission; Non-destructive testing; high voltage insulating systems; electrical treeing; quality of electrical energy
Interests: acoustic emission; Non-destructive testing; high voltage insulating systems; electrical treeing; quality of electrical energy
DECHEMA Forschungsinstitut / Theodor-Heuss-Allee 25 / D-60486 Frankfurt am Main / Germany
Interests: oxidation; corrosion; intermetallics; surface science
Interests: oxidation; corrosion; intermetallics; surface science
Department of Physics and Chemistry of Materials, Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia
Interests: corrosion; laser ablation; surface science; stainless steel; porous metals; additive manufacturing; EBSD; aes; XPS of thin oxide layers; FIB SEM; EDS/WDS
Interests: corrosion; laser ablation; surface science; stainless steel; porous metals; additive manufacturing; EBSD; aes; XPS of thin oxide layers; FIB SEM; EDS/WDS
Department of Joining and Welding Technology, Brandenburg Technical University, Cottbus, Germany
Interests: welding; Physics Simulation; simulation; Numerical simulation; finite element analysis; mathematical modelling
Interests: welding; Physics Simulation; simulation; Numerical simulation; finite element analysis; mathematical modelling
Łukasiewicz Research Network—Institute of Non-Ferrous Metals, Sowińskiego 5, 44-100 Gliwice, Poland
Interests: Hydrometallurgy; critical raw materials; germanium; Indium; zinc hydrometallurgy; copper hydrometallurgy; upscaling
Interests: Hydrometallurgy; critical raw materials; germanium; Indium; zinc hydrometallurgy; copper hydrometallurgy; upscaling
School of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai 200240, China
Interests: 3D printing of high performance alloys (Ti alloys, superalloys, functionally graded alloys, etc.); adaptive materials design for additive manufacturing; solidification of metallic alloys under external magnetic field
Interests: 3D printing of high performance alloys (Ti alloys, superalloys, functionally graded alloys, etc.); adaptive materials design for additive manufacturing; solidification of metallic alloys under external magnetic field
Material Science and Engineering School, Lanzhou University of Technology, Lanzhou 730050, China
Interests: the recovery of valuable elements from metallurgical slags and the design of microwave absorption materials
Interests: the recovery of valuable elements from metallurgical slags and the design of microwave absorption materials
Machine Design and Production Engineering Lab, Research Institute for Science and Material Engineering, University of Mons, Place du Parc 20, 7000 Mons, Belgium
Interests: manufacturing; finite element; engineering; virtual manufacturing; Ti6Al4V; composite; additive manufacturing
Interests: manufacturing; finite element; engineering; virtual manufacturing; Ti6Al4V; composite; additive manufacturing
Institut de Recherche Expérimentale et Clinique (IREC), Université Catholique de Louvain, 1348 Ottignies-Louvain-la-Neuve, Belgium
Interests: biomaterials; tissue engineering; surgery; regenerative medicine; anatomy scaffolds; biomimetic materials
Interests: biomaterials; tissue engineering; surgery; regenerative medicine; anatomy scaffolds; biomimetic materials
Faculty of Mechanical Engineering, Department of Foundry Engineering, Silesian University of Technology, 44-100 Gliwice, Poland
Interests: layered castings; metal matrix composites; mechanical properties; cast iron; cast steel; crystallization process; diffusion
Interests: layered castings; metal matrix composites; mechanical properties; cast iron; cast steel; crystallization process; diffusion
Department of Mechanical Engineering, Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Studentu str. 56, LT-51424 Kaunas, Lithuania
Interests: fracture mechanics; Low Cycle Fatigue; static and dynamic analysis of building and equipment; deterministic-probabilistic structural integrity analysis
Interests: fracture mechanics; Low Cycle Fatigue; static and dynamic analysis of building and equipment; deterministic-probabilistic structural integrity analysis
Technical University of Kosice
Faculty of Manufacturing Technologies with a seat in Presov
Bayerova 1
080 01 Presov
Slovakia
Interests: manufacturing; simulation; ergonomics; scheduling
Interests: manufacturing; simulation; ergonomics; scheduling
Department of Materials Technology, Faculty of Advanced Technologies & Chemistry, Military University of Technology, 00-908 Warsaw, Poland
Interests: additive manufacturing; metals and alloys; relationship between structure and structural and functional properties of metals and alloys; functional graded materials and composites; powder metallurgy; CNC machining
Interests: additive manufacturing; metals and alloys; relationship between structure and structural and functional properties of metals and alloys; functional graded materials and composites; powder metallurgy; CNC machining
Institut Jean Lamour, UMR 7198 Université de Lorraine/CNRS, Campus Artem, 2 allée André Guinier–BP 50840, Labex Damas, CEDEX, F-54011 Nancy, France
Interests: numerical modeling and simulation; metals; Computational Fluid Dynamics; CFD Simulation; Computational Fluid Mechanics; FLUENT; mathematical modelling; remelting processes; Electroslag Remelting (ESR); solidification; var; ESR
Interests: numerical modeling and simulation; metals; Computational Fluid Dynamics; CFD Simulation; Computational Fluid Mechanics; FLUENT; mathematical modelling; remelting processes; Electroslag Remelting (ESR); solidification; var; ESR
US Food and Drug Administration.
Interests: electrochemistry; material science; neurochemical sensing; boron doped diamond; biosensing; chemical sensors; electrochemical impedance spectroscopy; raman spectroscopy; X-ray photoelectro spectroscopy; microfabrication; corrosion; SOFC; gassensor
Interests: electrochemistry; material science; neurochemical sensing; boron doped diamond; biosensing; chemical sensors; electrochemical impedance spectroscopy; raman spectroscopy; X-ray photoelectro spectroscopy; microfabrication; corrosion; SOFC; gassensor
Department of Marine Maintenance, Faculty of Marine Engineering, Gdynia Maritime University, 81-225 Gdynia, Poland
Interests: mechanical and materials engineering; production engineering; plastic working; machining; burnishing
Interests: mechanical and materials engineering; production engineering; plastic working; machining; burnishing
RWTH Aachen University
Department for Industrial Furnaces and Heat Engineering
Kopernikusstr. 10
52074 Aachen
Germany
Interests: steelmaking; process modelling; electric arc furnace; industrial furnace; process analysis and optimization
Interests: steelmaking; process modelling; electric arc furnace; industrial furnace; process analysis and optimization
