Reviewer Board
Members of the reviewer board are selected from all Polymers reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Advanced Functional Materials & Nanotechnology Group, Centro de Investigacioń en Materiales Avanzados S. C. (CIMAV-Unidad Monterrey), Apodaca 66628, Mexico
Interests: functionalization of graphene; Nanoparticles; polymers; synthesis of polymers
Interests: functionalization of graphene; Nanoparticles; polymers; synthesis of polymers
i3N/CENIMAT, Department of Materials Science, Faculty of Science and Technology, Universidade NOVA de Lisboa, Campus de Caparica, 2829-516 Caparica, Portugal
Interests: biomaterials; cancer theranostics; magnetic hyperthermia; electrospinning; biopolymers and bioceramics
Interests: biomaterials; cancer theranostics; magnetic hyperthermia; electrospinning; biopolymers and bioceramics
A.V. Topchiev Institute of Petrochemical Synthesis RAS, 29 Leninsky Prospekt, 119991 Moscow, Russia
Interests: polymeric membranes; polymer solution; functional polysiloxanes; highly permeable glassy polymers; solution and diffusion in polymers
Interests: polymeric membranes; polymer solution; functional polysiloxanes; highly permeable glassy polymers; solution and diffusion in polymers
Department of Chemistry and Technology of Polyurethanes, Institute of Material Engineering, Kazimierz Wielki University, J. K. Chodkiewicza Street 30, 85-064 Bydgoszcz, Poland
Interests: bio-fillers; bio-polyols; fillers; polymers; polymers and biobased polymers; polyols; polyurethanes; pur-pir; synthesis of materials; mechanical properties; thermal properties; industrial applications; Thermal Insulation; pur; pir; vegetable oils; recycli
Interests: bio-fillers; bio-polyols; fillers; polymers; polymers and biobased polymers; polyols; polyurethanes; pur-pir; synthesis of materials; mechanical properties; thermal properties; industrial applications; Thermal Insulation; pur; pir; vegetable oils; recycli
1. Department of Material Chemistry, Kyoto Institute of Technology, Matsugasaki Hashikamicho, Sakyo Ward, Kyoto 606-8585, Japan
2. Department of Dental Medicine, Graduate School of Medicine Science, Kyoto Prefectural University of Medicine, Kamigyo-ku, Kyoto 602-8566, Japan
Interests: biomaterials; orthopedic implants; electrospinning; centrifugal spinning; melt spinning; biopolymers; coatings; material characterizations; bacteriostatic behavior; osteoconductivity; hydroxyapatite
2. Department of Dental Medicine, Graduate School of Medicine Science, Kyoto Prefectural University of Medicine, Kamigyo-ku, Kyoto 602-8566, Japan
Interests: biomaterials; orthopedic implants; electrospinning; centrifugal spinning; melt spinning; biopolymers; coatings; material characterizations; bacteriostatic behavior; osteoconductivity; hydroxyapatite
Department of Chemistry and Biochemistry, College of Charleston, Charleston, SC 29414, USA
Interests: biodegradable and semiconducting polymers; polymer physics and characterization (AFM, DSC, DSL, rheology, etc.); solubility parameter methods
Interests: biodegradable and semiconducting polymers; polymer physics and characterization (AFM, DSC, DSL, rheology, etc.); solubility parameter methods
Composites and Nanocomposites Center (CNC), Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Rabat Design Center, Rue Mohamed El Jazouli, Madinat El Irfane, 10100 Rabat, Morocco
Interests: material chemistry; polymer; nanomaterial
Interests: material chemistry; polymer; nanomaterial
Department of Agricultural and Biological Engineering, The University of Florida, Gainesville, FL 110570, USA
Interests: packaging; food; digital twins; food engineering; processing
Interests: packaging; food; digital twins; food engineering; processing
Department of Chemical Engineering Materials & Environment, University of Rome "Sapienza", via Eudossiana 18, 00184 Rome, Italy
Interests: materials science; Spectroscopic Techniques; photovoltaics; organic electronics; materials characterization; nanomaterials
Interests: materials science; Spectroscopic Techniques; photovoltaics; organic electronics; materials characterization; nanomaterials
Department of Chemistry, Royal College of Surgeons in Ireland (RCSI), Dublin 2, Ireland
Interests: synthetic polymer chemistry; sustainable monomer and polymer design; biodegradable and bio-absorbable polymers; materials properties; polymers for biomedical; pharmaceutical and agricultural applications
Interests: synthetic polymer chemistry; sustainable monomer and polymer design; biodegradable and bio-absorbable polymers; materials properties; polymers for biomedical; pharmaceutical and agricultural applications
1. Institute of Condensed Matter and Nanosciences, Université Catholique de Louvain, Place Louis Pasteur 1, bte L4.01.10, B-1348 Louvain-la-Neuve, Belgium
2. Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences, Niezapominajek 8, PL30239 Krakow, Poland
Interests: stimuli-responsive coatings; protein adsorption; smart coatings
2. Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences, Niezapominajek 8, PL30239 Krakow, Poland
Interests: stimuli-responsive coatings; protein adsorption; smart coatings
Leibniz Institute of Surface Engineering (IOM), Permoserstraße 15, D-04318 Leipzig, Germany
Interests: wastewater treatment; membranes; polymerization
Interests: wastewater treatment; membranes; polymerization
Department of Research and Scholarly Activity, Rocky Vista University, 255 E Center St, Ivins, UT 84738, USA
Interests: polymer controlled drug delivery; biopolymers; antibiotic resistance
Interests: polymer controlled drug delivery; biopolymers; antibiotic resistance
Departamento de Farmácia, Universidade Estadual de Maringa, Maringa, Brazil
Interests: pharmaceutics; drug delivery systems; pharmaceutical technology; biomaterials; technology of phytomedicines; micro/nanotechnology; propolis
Interests: pharmaceutics; drug delivery systems; pharmaceutical technology; biomaterials; technology of phytomedicines; micro/nanotechnology; propolis
Department of Commodity Industrial Science and Chemistry, Gdynia Maritime University, 83Morska Street, 81-225 Gdynia, Poland
Interests: carbon fibre composites
Interests: carbon fibre composites
Instituto Tecnológico de la Energía (ITE) in Valencia (Spain), Valencia, Spain
Interests: polymeric materials and composites for biofuel cell development; catalyst and electrocatalyst development; polymeric membranes synthesis and characterization
Interests: polymeric materials and composites for biofuel cell development; catalyst and electrocatalyst development; polymeric membranes synthesis and characterization
Faculdade de Odontologia de Bauru, Universidade de São Paulo, Bauru, Brazil
Interests: low-level laser therapy; photobiomodulation therapy; nerve repair; bone repair; anatomy; tissue regeneration; dentistry; regenerative medicine; biomaterials; fibrin glue; fibrin sealant
Interests: low-level laser therapy; photobiomodulation therapy; nerve repair; bone repair; anatomy; tissue regeneration; dentistry; regenerative medicine; biomaterials; fibrin glue; fibrin sealant
Laboratoire de Physicochimie des Polymères et des Interfaces LPPI, IST, CY Tech, CY Cergy Paris Université, 5 mail Gay Lussac, 95000 Neuville-sur-Oise, France
Interests: polymeric materials; material characterization; pi-conjugated molecular and polymeric materials; organic electronocs; solar cells; charge transporting materials
Interests: polymeric materials; material characterization; pi-conjugated molecular and polymeric materials; organic electronocs; solar cells; charge transporting materials
Department of Environmental Engineering and Management, Gheorghe Asachi Technical University of Iaşi, Iaşi, Romania
Interests: waste recycling; wastewater treatment; environmental pollution; environmental bioremediation; biosorption/adsorption; heavy metals pollutants; batch and continuous systems; low-cost biosorbents/adsorbents; valorization of exhausted biosorbents/adsorbents; ecological fertilizers for soils
Interests: waste recycling; wastewater treatment; environmental pollution; environmental bioremediation; biosorption/adsorption; heavy metals pollutants; batch and continuous systems; low-cost biosorbents/adsorbents; valorization of exhausted biosorbents/adsorbents; ecological fertilizers for soils
Institute for Materials Research (MPR&S), University Hasselt, Martelarenlaan 42, B-3500 Hasselt, Belgium
Interests: bioplastics; packaging materials; functionalisation; nanoparticles; migration; leaching; food contact materials
Interests: bioplastics; packaging materials; functionalisation; nanoparticles; migration; leaching; food contact materials
Department of High-Temperature Materials and Processes, National University of Science and Technology MISiS, Leninskiy Prospekt 4, 119049 Moscow, Russia
Interests: polymer; composite; high-k composite; nanocomposite; carbon nanomaterials; double percolation effect
Interests: polymer; composite; high-k composite; nanocomposite; carbon nanomaterials; double percolation effect
Institute of Solid State Chemistry and Mechanochemistry SB RAS, Kutateladze 18, 630128 Novosibirsk, Russia
Interests: mechanochemistry; polymers; plant raw material; cellulose; supramolecular structure; Electron Microscopy
Interests: mechanochemistry; polymers; plant raw material; cellulose; supramolecular structure; Electron Microscopy
epartment of Advanced Materials Engineering, Keimyung University, Daegu 42601, Republic of Korea
Interests: micro-to-nanometer scale assemblies; smart stimuli-responsive polymer systems; unconventional patterning; surface wetting
Interests: micro-to-nanometer scale assemblies; smart stimuli-responsive polymer systems; unconventional patterning; surface wetting
Faculty of Medical Dentistry, “Apollonia” University of Iasi, 700511 Iasi, Romania
Interests: liposomes; Nanoparticles; hydrogels
Interests: liposomes; Nanoparticles; hydrogels
Institute of Construction and Building Materials, TU Darmstadt, Franziska Braun-Straße 3, 64287 Darmstadt, Germany
Interests: cement-based materials; fibers; FRC; recycling; recycled aggregates; recycled fibers; phase change materials; composites; biocomposites; self-healing; high temperature; bond behavior; constitutive rules; fracture; fem; discontinuous-based approaches; microscale; mesoscale; multiscale; transport phenomena; coupled systems; numerical methods
Interests: cement-based materials; fibers; FRC; recycling; recycled aggregates; recycled fibers; phase change materials; composites; biocomposites; self-healing; high temperature; bond behavior; constitutive rules; fracture; fem; discontinuous-based approaches; microscale; mesoscale; multiscale; transport phenomena; coupled systems; numerical methods
Department of Computer Engineering, Modeling, Electronics and Systems (D.I.M.E.S), University of Calabria, I-87036 Rende, Italy
Interests: transport phenomena; biotechnology; enzyme membrane reactors; separation process; biofuels; biodiesel; energy storage; phase change materials; materials; Membrane processes
Interests: transport phenomena; biotechnology; enzyme membrane reactors; separation process; biofuels; biodiesel; energy storage; phase change materials; materials; Membrane processes
Escuela Nacional de Ciencias Biológicas–IPN, Mexico City 07738, Mexico
Interests: biopolymers; electrospinning; electrospraying; starch; pectin; breadmaking; encapsulation; fims
Interests: biopolymers; electrospinning; electrospraying; starch; pectin; breadmaking; encapsulation; fims
Laboratoire Mint, Université d’Angers, Angers, France
Interests: chemical engineering; pharmaceutical technology; physical-chemistry of interfaces and dispersed systems (formulation and characterisation); drug delivery systems (micro/nanomedicines, medical devices); supercritical fluids; microfluidics; 3D printing
Interests: chemical engineering; pharmaceutical technology; physical-chemistry of interfaces and dispersed systems (formulation and characterisation); drug delivery systems (micro/nanomedicines, medical devices); supercritical fluids; microfluidics; 3D printing
Department of Manufacturing Engineering, Universidad Nacional de Educación a Distancia (UNED), Juan del Rosal 12, E28040-Madrid, Spain
Interests: manufacturing engineering; additive manufacturing; fused deposition modelling; metal forming; hybrid components processing; multi-material processing; finite element modeling; damage analysis; tribological properties; mechanical characterization; methodologies for materials selection in manufacturing
Interests: manufacturing engineering; additive manufacturing; fused deposition modelling; metal forming; hybrid components processing; multi-material processing; finite element modeling; damage analysis; tribological properties; mechanical characterization; methodologies for materials selection in manufacturing
Prof. Dr. Cesare Cametti
Dipartimento di Fisica, CNR-INFM-SOFT, Universita' di Roma “La Sapienza”, Rome, Italy
Interests: soft matter physics; biophysics; sensors
Interests: soft matter physics; biophysics; sensors
