Reviewer Board
Members of the reviewer board are selected from all Polymers reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
College of Textile and Clothing Engineering, Soochow University, Suzhou 215123, China
Interests: Textile Chemistry; flame retardant modification of textile materials
Interests: Textile Chemistry; flame retardant modification of textile materials
Guangdong Provincial Key Laboratory of Marine Biotechnology, Department of Biology, College of Science, Shantou University, Shantou City 515063, China
Interests: polysaccharide; oligosaccharide; separation; purification
Interests: polysaccharide; oligosaccharide; separation; purification
Research Center for Nanotechnology Applied to Engineering of Sapienza (CNIS), Sapienza University of Roma, 00185 Roma, Italy
Interests: micro and nanocoating; graphene; carbon-based material; biomaterials; flexible and stretchable electronic devices; transparent conductive film; sensors; piezoelectric materials; electronic textiles; nanogenerator; smart textile; energy harvesting; polymers for drug delivery application; material characterization; 3D printing; thin-film technologies
Interests: micro and nanocoating; graphene; carbon-based material; biomaterials; flexible and stretchable electronic devices; transparent conductive film; sensors; piezoelectric materials; electronic textiles; nanogenerator; smart textile; energy harvesting; polymers for drug delivery application; material characterization; 3D printing; thin-film technologies
1. Department of Biology and Anatomy, National Defense Medical Center, Taipei, Taiwan
2. Department of Gerontological Health Care, National Taipei University of Nursing and Health Sciences, Taipei, Taiwan
Interests: adult stem cell and neuroregenerative medicine; polymers and tissue engineering; anatomy and developmental biology; animal disease model; physiological electrical signal analysis
2. Department of Gerontological Health Care, National Taipei University of Nursing and Health Sciences, Taipei, Taiwan
Interests: adult stem cell and neuroregenerative medicine; polymers and tissue engineering; anatomy and developmental biology; animal disease model; physiological electrical signal analysis
Shandong Provincial Key Laboratory of Molecular Engineering, School of Chemistry and Pharmaceutical Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China
Interests: POSS hybrids; 3D printing; waste water treatment
Interests: POSS hybrids; 3D printing; waste water treatment
Dr. Yu-Hsuan Chiao
Department of Chemical Engineering, University of Arkansas, Fayetteville, AR 72701, USA
Interests: membrane separation; zwitterionic material; antifouling/antibacterial; water treatment; graphene
Interests: membrane separation; zwitterionic material; antifouling/antibacterial; water treatment; graphene
Petru Poni Institute of Macromolecular Chemistry, 41 A Gr. Ghica Voda Alley, 700487 Iasi, Romania
Interests: Polymer Composites; metal nanoparticles; photocatalytic efficiency; visible light
Interests: Polymer Composites; metal nanoparticles; photocatalytic efficiency; visible light
Department of Chemical Sciences and Technologies, University of Rome Tor Vergata, Via della Ricerca Scientifica I, 00133 Roma, Italy
Interests: polymers; biopolymers; molecular modeling; molecular dynamics simulation; hydrogel; microgel; water; poly(N‑isopropylacrylamide); thermal responsivity
Interests: polymers; biopolymers; molecular modeling; molecular dynamics simulation; hydrogel; microgel; water; poly(N‑isopropylacrylamide); thermal responsivity
Department of Botanicals, Medical and Pharmaceutical Industry Technology and Development Center, New Taipei City, Taiwan
Interests: chitosan; diabetes; Musculoskeletal Disorders; hyperlipidemia; safety assessment of food and drug
Interests: chitosan; diabetes; Musculoskeletal Disorders; hyperlipidemia; safety assessment of food and drug
Department of Energy Systems Engineering, Soonchunhyang University, Asan 31538, Republic of Korea
Interests: polymer synthesis; polymer physics; semiconducting polymers; conducting polymers; Photocurable polymers; 3D printing; biopolymers
Interests: polymer synthesis; polymer physics; semiconducting polymers; conducting polymers; Photocurable polymers; 3D printing; biopolymers
Department of Textile System Engineering, Kyungpook National University, Daegu 41566, Republic of Korea
Interests: dye; fluorescent dye; dye for color filter; dyeing; high fastness
Interests: dye; fluorescent dye; dye for color filter; dyeing; high fastness
1. Department of Orthodontics, Institute of Craniofacial Deformity, Yonsei University College of Dentistry, 50-1 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea
2. BK21 PLUS Project, Yonsei University College of Dentistry, Seoul 03722, Republic of Korea
Interests: biofilm; zwitterionic material; biomaterial; anti-biofouling; anti-bacterial; implant: orthodontic treatment; orthognathic surgery
2. BK21 PLUS Project, Yonsei University College of Dentistry, Seoul 03722, Republic of Korea
Interests: biofilm; zwitterionic material; biomaterial; anti-biofouling; anti-bacterial; implant: orthodontic treatment; orthognathic surgery
HP-NTU Digital Manufacturing Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University, 639798 Singapore, Singapore
Interests: additive manufacturing; functional additive manufacturing; 3D printing; 4D printing; vat polymerization; selective laser melting; digital light processing; shape memory polymers
Interests: additive manufacturing; functional additive manufacturing; 3D printing; 4D printing; vat polymerization; selective laser melting; digital light processing; shape memory polymers
Department of Mechanical Engineering, College of Engineering, The University of Texas at Tyler, 3900 University Blvd, Tyler, TX 75799, USA
Interests: fibrous membranes; tissue scaffolds; biopolymers; drug delivery; skin tissue engineering; wound healing; mechanical properties; biodegradation
Interests: fibrous membranes; tissue scaffolds; biopolymers; drug delivery; skin tissue engineering; wound healing; mechanical properties; biodegradation
1. Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre of RTU, Faculty of Materials, Science and Applied Chemistry, Institute of General Chemical Engineering, Riga Technical University, Pulka St 3, LV-1007 Riga, Latvia
2. Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, LV-1007 Riga, Latvia
Interests: biomaterials; bone regeneration; antibacterial studies; drug delivery; 3D printing; polymeric composites; bioceramics; surface characterization; biowaste utilization; bioactivity
2. Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, LV-1007 Riga, Latvia
Interests: biomaterials; bone regeneration; antibacterial studies; drug delivery; 3D printing; polymeric composites; bioceramics; surface characterization; biowaste utilization; bioactivity
Faculty of Chemistry, Lodz University of Technology, Lodz, Poland
Interests: chemistry and technology of polymers; synthesis and characterization of polymers; organosilicon polymers; chemical and antimicrobial modification of textiles
Interests: chemistry and technology of polymers; synthesis and characterization of polymers; organosilicon polymers; chemical and antimicrobial modification of textiles
Graduate Institute of Biomedical Materials and Tissue Engineering, Taipei Medical University, Taipei 11031, Taiwan
Interests: biomaterials; nanomedicine; nano-biomaterials; drug delivered systems
Interests: biomaterials; nanomedicine; nano-biomaterials; drug delivered systems
Intelligent Polymer Research Institute, ARC Centre of Excellence for Electromaterials Science, AIIM Facility, Innovation Campus, University of Wollongong 2522, NSW, Australia
Interests: biomaterials (tissue engineering, hydrogels, drug delivery systems); 3D additive manufacturing (extrusion printing, inkjet printing, microvalve printing, melt electro-writing)
Interests: biomaterials (tissue engineering, hydrogels, drug delivery systems); 3D additive manufacturing (extrusion printing, inkjet printing, microvalve printing, melt electro-writing)
Department of Materials Science and Engineering, National Cheng Kung University, Tainan City 701, Taiwan
Interests: energy conversion and storage materials; metal-sulfur batteries; batteries; SOFC; fuel cells
Interests: energy conversion and storage materials; metal-sulfur batteries; batteries; SOFC; fuel cells
1. Dipartimento DICAR (Department of Civil Engineering and Architecture), Università di Catania, Viale Andrea Doria 6, 95125 Catania, Italy
2. UdR-Catania Consorzio INSTM, Viale Andrea Doria 6, 95125 Catania, Italy
Interests: Fiber Reinforced Composites; electrospinning; additive manufacturing; polymer blends; nanocomposites; green composites
2. UdR-Catania Consorzio INSTM, Viale Andrea Doria 6, 95125 Catania, Italy
Interests: Fiber Reinforced Composites; electrospinning; additive manufacturing; polymer blends; nanocomposites; green composites
Fraunhofer Institute for Structural Durability and System Reliability LBF Division plastics, Schlossgartenstraße 6, 64289 Darmstadt, Germany
Interests: flame retardant polymeric materials
Interests: flame retardant polymeric materials
Romanian Academy
"Petru Poni" Institute of Macromolecular Chemistry
Laboratory of Natural Polymers, Bioactive and Biocompatible Materials
41A Grigore Ghica - Voda Alley, 700487, Iasi, Romania
Interests: cellulose; natural polymers; polysaccharides; microcrystalline; nanofibers; nanocrystals; hydrogels; aerogels; composites; drug delivery; wound dressing
Interests: cellulose; natural polymers; polysaccharides; microcrystalline; nanofibers; nanocrystals; hydrogels; aerogels; composites; drug delivery; wound dressing
Smart Materials, Istituto Italiano di Tecnologia, Via Morego 30, 16163 Genova, Italy
Interests: composites; nanocomposite coatings; material characterization; Materials Processing; mechanical properties; aerospace engineering
Interests: composites; nanocomposite coatings; material characterization; Materials Processing; mechanical properties; aerospace engineering
Department of Health Sciences, Università del Piemonte Orientale, 28100 Novara, Italy
Interests: biomaterials; tissue engineering; stem cells; cartilage; mechanobiology; antibacterial; biofilm
Interests: biomaterials; tissue engineering; stem cells; cartilage; mechanobiology; antibacterial; biofilm
Departamento de Química, NOVA School of Science and Technology (FCT NOVA), Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal
Interests: membrane processes; food packaging; biopolymers
Interests: membrane processes; food packaging; biopolymers
Faculty of Engineering, Babeș-Bolyai University, 320085 Reşiţa Caraş-Severin, Romania
Interests: mechanics of materials; stress; strain; finite element analysis; 3D printing; mechanical properties; mechanical tests
Interests: mechanics of materials; stress; strain; finite element analysis; 3D printing; mechanical properties; mechanical tests
Department of Bioengineering, Imperial College London, London SW7 2AZ, UK
Interests: biomaterials; tissue engineering; hydrogels; biofabrication; polymers
Interests: biomaterials; tissue engineering; hydrogels; biofabrication; polymers
Facultad de Farmacia y Bioquímica, Universidad de Buenos Aires, C1113 AAD Buenos Aires, Argentina
Interests: nanocomposite; chitin; keratin; pectin; hydrogel; natural polymer
Interests: nanocomposite; chitin; keratin; pectin; hydrogel; natural polymer
Dipartimento di Architettura, Università degli Studi di Palermo, Viale delle Scienze, 90128 Palermo, Italy
Interests: sustainability; building renovation
Interests: sustainability; building renovation
Faculty of Health Sciences, Universidade da Beira Interior, 6201-001 Covilhã, Portugal
Interests: biomaterials; cell culture; drug delivery; tissue regeneration; wound healing
Interests: biomaterials; cell culture; drug delivery; tissue regeneration; wound healing
