Fabricating the Superhydrophobic Nickel and Improving Its Antifriction Performance by the Laser Surface Texturing
Abstract
:1. Introduction
2. Experimental Section
2.1. Material Pretreatment
2.2. Laser Surface Texturing
2.3. Post-Treatment of Materials
2.4. The Measurement of the Wettability
2.5. The Antifriction Performance
3. Result and Discussion
4. Conclusions
Author Contributions
Funding
Conflicts of Interest
References
- Shilova, O.A.; Proskurina, O.I.; Antipov, V.N.; Khamova, T.V.; Esipova, N.E.; Pugachev, K.E.; Ladilina, E.Y.; Kruchinina, I.Y. The sol-gel and hydrophobic properties of antifriction coatings for use in high-speed mini-turbogenerators. Glass Phys. Chem. 2014, 40, 319–323. [Google Scholar] [CrossRef]
- He, G.; Lu, S.X.; Xu, W.G.; Yu, J.Y.; Wu, B.; Cui, S. Fabrication of durable superhydrophobic electrodeposited tin surfaces with tremella-like structure on copper substrate. Surf. Coat. Technol. 2017, 309, 590–599. [Google Scholar] [CrossRef]
- Garcia, G.A.; Romano, J.M.; Liang, Y.; Dashtbozorg, B.; Dong, H.; Penchev, P.; Dimova, S.S. Combined Surface Hardenng and Laser Patterning Approach for Functionalising Stainless Steel Surfaces. Appl. Surf. Sci. 2018, 439, 516–524. [Google Scholar] [CrossRef]
- Mozammel, M.; Khajeh, M.; Ilkhechi, N.N. Effect of surface roughness of 316L stainless steel substrate on the morphological and super-hydrophobic property of TiO2, thin films coatings. Silicon 2018, 10, 2603–2607. [Google Scholar] [CrossRef]
- Hu, F.T.; Xu, P.H.; Wang, H.Z.; Kang, U.B.; Hu, A.M.; Li, M. Superhydrophobic and anti-corrosion Cu microcones/Ni-W alloy coating fabricated by electrochemical approaches. RSC Adv. 2015, 5, 103863–103868. [Google Scholar] [CrossRef]
- Zhang, H.F.; Liang, Y.; Liu, X.W.; Wen, R.; Wang, Y.; Wu, Z.W. Wetting behavior and drag reduction of superhydrophobic layered double hydroxides films on aluminum. Appl. Surf. Sci. 2016, 380, 178–184. [Google Scholar] [CrossRef]
- Zhang, J.P.; Wang, A.Q.; Seeger, S. Nepenthes Pitcher Inspired Anti-Wetting Silicone Nanofilaments Coatings: Preparation, Unique Anti-Wetting and Self-Cleaning Behaviors. Adv. Funct. Mater. 2014, 24, 1074–1080. [Google Scholar] [CrossRef]
- Wei, C.Q.; Jin, B.Y.; Zhang, Q.H.; Zhan, X.L.; Chen, F.Q. Anti-icing performance of super-wetting surfaces from icing-resistance to ice-phobic aspects: Robust hydrophobic or slippery surfaces. J. Alloys Compd. 2018, 765, 721–730. [Google Scholar] [CrossRef]
- Zheng, H.; Chang, S.N.; Zhao, Y.Y. Anti-Icing & Icephobic Mechanism and Applications of Superhydrophobic/Ultra Slippery Surface. Prog. Chem. 2017, 29, 102–118. [Google Scholar]
- Kulinich, S.A.; Farhadi, S.; Nose, K.; Du, X.W. Superhydrophobic surfaces: Are they really ice-repellent? Langmuir 2011, 27, 25–29. [Google Scholar] [CrossRef] [PubMed]
- Ruan, M.; Wang, J.W.; Liu, Q.L.; Ma, F.M.; Yu, Z.L.; Feng, W.; Chen, Y. Superhydrophobic and anti-icing properties of sol-gel prepared alumina coatings. Russ. J. Non-Ferr. Met. 2016, 57, 638–645. [Google Scholar] [CrossRef]
- Elisa, S.G.; Fernando, A.E.; Rodolfo, M.V.; Mariola, P.R. Promotion of tribological and hydrophobic properties of a coating on TPE substrates by atmospheric plasma-polymerization. Appl. Surf. Sci. 2016, 371, 50–60. [Google Scholar]
- Zhang, J.J.; Zhang, J.G.; Rosenkranz, A.; Zhao, X.L.; Song, Y.L. Surface Textures Fabricated by Laser Surface Texturing and Diamond Cutting—Influence of Texture Depth on Friction and Wear. Adv. Eng. Mater. 2018, 20, 1700995. [Google Scholar] [CrossRef]
- Liang, L.; Yuan, J.D.; Li, X.Q.; Yang, F.; Jiang, L.L. Wear behavior of the micro-grooved texture on WC-Ni3Al cermet prepared by laser surface texturing. Int. J. Refract. Met. Hard Mater. 2018, 72, 211–222. [Google Scholar] [CrossRef]
- Ahmmed, K.M.T.; Grambow, C.; Kietzig, A.M. Fabrication of Micro/Nano Structures on Metals by Femtosecond Laser Micromachining. Micromachines 2014, 5, 1219–1253. [Google Scholar] [CrossRef] [Green Version]
- Bonse, J.; Kirner, S.V.; Griepentrog, M.; Spaltmann, D.; Krüger, J. Femtosecond Laser Texturing of Surfaces for Tribological Applications. Materials 2018, 11, 801. [Google Scholar] [CrossRef] [PubMed]
- Pan, H.H.; Wang, Z.; Fan, W.Z.; Wang, C.W.; Li, H.J.; Bai, F.; Qian, J.; Zhao, Q.Z. Superhydrophobic titanium surface micro/nanostructures induced by femtosecond laser. Chin. J. Lasers 2016, 43. [Google Scholar] [CrossRef]
- Vorobyev, A.Y.; Guo, C. Femtosecond laser structuring of titanium implants. Appl. Surf. Sci. 2007, 253, 7272–7280. [Google Scholar] [CrossRef]
- Jung, Y.C.; Bhushan, B. Contact angle, adhesion and friction properties of micro-and nanopatterned polymers for superhydrophobicity. Nanotechnology 2006, 17, 4970. [Google Scholar] [CrossRef]
- Yamakiri, H.; Sasaki, S.; Kurita, T.; Nagayoshi, K. Effects of laser surface texturing on friction behavior of silicon nitride under lubrication with water. Tribol. Int. 2011, 44, 579–584. [Google Scholar] [CrossRef]
- Li, J.; Yang, Y.; Ren, Y.; Dong, J.; Yang, K. Effect of cold deformation on corrosion fatigue behavior of nickel-free high nitrogen austenitic stainless steel for coronary stent application. J. Mater. Sci. Technol. 2018, 34, 660–665. [Google Scholar] [CrossRef]
- Shajudheen, V.P.M.; Rani, K.A.; Kumar, V.S.; Maheswari, A.U.; Sivakumar, M.; Kumar, S.S. Comparison of Anticorrosion Studies of Titanium Dioxide andNickel Oxide Thin Films Fabricated by Spray Coating Technique. Mater. Today 2018, 5, 8889–8898. [Google Scholar] [CrossRef]
- Beheshti, M.; Ismail, M.C.; Kakooei, S.; Shahrestani, S.; Mohan, G.; Zabihiazadboni, M. Influence of deposition temperature on the corrosion resistance of electrodeposited zinc-nickel alloy coatings: Einfluss der Abscheidetemperatur auf die Korrosionsbeständigkeit von galvanisch aufgebrachten Zink-Nickel-Beschichtungen. Materialwiss. Werkst. 2018, 49, 472–482. [Google Scholar] [CrossRef]
- Hadipour, A.; Bharololoom, M.E. Influence of Type of Bath Agitation (Magnetic Stirring and Rotating Disk Cathode) on Tribological Properties of Nickel Electrodeposits. Prot. Met. Phys. Chem. Surf. 2018, 54, 274–281. [Google Scholar] [CrossRef]
- Geng, W.Y.; Hu, A.M.; Li, M. Super-hydrophilicity to super-hydrophobicity transition of a surface with Ni micro-nano cones array. Appl. Surf. Sci. 2012, 263, 821–824. [Google Scholar] [CrossRef]
- Long, J.Y.; Zhong, M.L.; Zhang, H.J.; Fan, P.X. Superhydrophilicity to superhydrophobicity transition of picosecond laser microstructured aluminum in ambient air. J. Colloid Interface Sci. 2014, 441, 1–9. [Google Scholar] [CrossRef]
- Kietzig, A.M.; Hatzikiriakos, S.G.; Englezos, P. Patterned superhydrophobic metallic surfaces. Langmuir 2009, 25, 4821–4827. [Google Scholar] [CrossRef]
- Kietzig, A.M.; Mirvakili, M.N.; Kamal, S.; Englezos, P.; Hatzikiriakos, S.G. Laser-Patterned Super-Hydrophobic Pure Metallic Substrates: Cassie to Wenzel Wetting Transitions. J. Adhes. Sci. Technol. 2012, 25, 2789–2809. [Google Scholar]
- Gennes, P.G.D.; Wyart, B.; David, Q. Capillarity and Wetting Phenomena; Springer: New York, NY, USA, 2004. [Google Scholar]
- Marmur, A. A Guide to the Equilibrium Contact Angles Maze Contact Angle; Taylor & Francis Group: Abingdon, UK, 2009. [Google Scholar]
- Starostin, A.; Valtsifer, V.; Strelnikov, V.; Bormashenko, E.; Grynyov, R.; Bormashenko, Y.; Gladkikh, A. Robust technique allowing the manufacture of superoleophobic (omniphobic) metallic surfaces. Adv. Eng. Mater. 2014, 16, 1127–1132. [Google Scholar] [CrossRef]
- Gao, Y.; Wu, B.; Yun, Z.; Sha, T. A two-step nanosecond laser surface texturing process with smooth surface finish. Appl. Surf. Sci. 2011, 257, 9960–9967. [Google Scholar] [CrossRef]
- Gao, L.; Yang, P.; Dymond, I.; Fisher, J.; Jin, Z. Effect of surface texturing on the elastohydrodynamic lubrication analysis of metal-on-metal hip implants. Tribol. Int. 2010, 43, 1851–1860. [Google Scholar] [CrossRef]
- Cho, M.H.; Park, S. Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding. Tribol. Int. 2011, 44, 859–867. [Google Scholar] [CrossRef]
- Olin, P.; Lindström, S.B.; Pettersson, T.; Wågberg, L. Water Drop Friction on Superhydrophobic Surfaces. Langmuir 2013, 29, 9079–9089. [Google Scholar] [CrossRef]
- Rapoport, L.; Moshkovich, A.; Perfilyev, V.; Lapsker, I.; Halperin, G.; Itovich, Y.; Etsion, I. Friction and wear of MoS2 films on laser textured steel surfaces. Surf. Coat. Technol. 2008, 202, 3332–3340. [Google Scholar] [CrossRef]
- Etsion, I.; Sher, E. Improving fuel efficiency with laser surface textured piston rings. Tribol. Int. 2009, 42, 542–547. [Google Scholar] [CrossRef]
- Wen, S.; Hui, H.; Yan, Z.; Chen, Z.P.; Wei, Q.S.; Shi, Y.S. Enhanced hardness and wear property of S136 mould steel with nano-TiB2 composites fabricated by selective laser melting method. Appl. Surf. Sci. 2018, 457, 11–20. [Google Scholar] [CrossRef]
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Share and Cite
Huang, J.; Wei, S.; Zhang, L.; Yang, Y.; Yang, S.; Shen, Z. Fabricating the Superhydrophobic Nickel and Improving Its Antifriction Performance by the Laser Surface Texturing. Materials 2019, 12, 1155. https://doi.org/10.3390/ma12071155
Huang J, Wei S, Zhang L, Yang Y, Yang S, Shen Z. Fabricating the Superhydrophobic Nickel and Improving Its Antifriction Performance by the Laser Surface Texturing. Materials. 2019; 12(7):1155. https://doi.org/10.3390/ma12071155
Chicago/Turabian StyleHuang, Junyuan, Songbo Wei, Lixin Zhang, Yingying Yang, Song Yang, and Zejun Shen. 2019. "Fabricating the Superhydrophobic Nickel and Improving Its Antifriction Performance by the Laser Surface Texturing" Materials 12, no. 7: 1155. https://doi.org/10.3390/ma12071155