Search Results (1,015)

This study evaluated chemical safety indicators in 38 commercial fish sauces from Thailand, South Korea, Taiwan, and Vietnam sold in Taiwan. We quantified key nitrogenous compounds, biogenic amines, preservatives, and sodium levels, and further characterized metabolite profiles using untargeted ¹H nuclear magnetic resonance (¹H-NMR) spectroscopy. Vietnamese fish sauces exhibited the highest total nitrogen content and lowest pH, indicating superior fermentation quality. Sodium concentrations ranged from 5037 to 12,637 mg/100 mL, and nearly 40% of products, particularly Thai and Korean, exceeded the permitted labeling tolerance (≤120%), highlighting substantial labeling inaccuracies. Preservative analysis revealed the unauthorized or excessive use of benzoates and sorbates in several samples, indicating regulatory non-compliance. Preservative analysis revealed that three of seven Taiwanese samples contained dehydroacetic acid above the regulatory limit of 1 g/kg, with sample C6 both mislabeled and showing the highest concentration (3.22 g/kg). Among the ten Vietnamese samples, two exceeded the permissible limits for combined preservative use, and samples D2–D5 contained triacetin, a non-listed food additive, in violation of current regulations. Notably, South Korean fish sauces contained histamine concentrations up to 539.85 ± 318.88 ppm, with several samples surpassing the Taiwanese regulatory limit of 400 ppm, raising significant food safety concerns. Metabolomic analysis differentiated products by country, with formic acid, acetate, branched-chain amino acids, and alanine contributing to the distinct profiles of Thai and Taiwanese fish sauces. Collectively, our results provide critical insights into the quality and safety of fish sauce products, highlighting the importance of monitoring biogenic amines and ensuring accurate labeling to comply with food safety regulations. Full article

This study developed a novel adsorbent for Cr (VI) removal from wastewater by grafting N-[(dimethylamino)methylene]thiourea (TUFA) onto lignin. The resulting TUFA-functionalized lignin adsorbent AL was comprehensively characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR), and X-ray photoelectron spectroscopy (XPS). Batch adsorption experiments systematically evaluated the influence of solution pH, contact time, temperature, initial Cr (VI) concentration, and adsorbent dosage. AL exhibited high adsorption capacity (593.9 mg g⁻¹ at 40 °C), attributed to its abundant nitrogen and sulfur-containing functional groups. Kinetic analysis revealed that the adsorption process followed pseudo-second-order kinetics. Equilibrium isotherm data were best described by the Langmuir model, indicating predominant monolayer chemisorption. Thermodynamic parameters demonstrated that Cr (VI) adsorption onto AL is spontaneous, endothermic, and entropy-driven. The adsorption mechanism involves membrane diffusion and intra-particle diffusion processes. This work successfully synthesized a stable, effective, and low-cost adsorbent (AL) using an amine agent incorporating both nitrogen and sulfur functional groups, offering a promising approach for treating Cr (VI)-contaminated wastewater. Full article

Small ruminant production is a significant sector of agricultural industry in Texas, USA. Heat stress has a negative effect on productivity and animal health. Cholecalciferol, a form of vitamin D₃, may enhance the function of immune cells and help ensure healthy immune function in farm animals exposed to heat stress. Practical applications of vitamin D₃ against infectious diseases can benefit from the protective effects of a delivery system comprised of soy protein isolate and stachyose in emulsion gel. The prebiotic oligosaccharide stachyose has shown to have a great potential as a substrate for beneficial intestinal bacteria, which are thought to modulate the immune system. Cellular and humoral immunity are both impaired in dairy animals under heat stress. The delivery of vitamin D₃ embedded within the soy protein isolate-stachyose emulsion gel resulted in a marked increase in 25-hydroxyvitamin D₃ [25-(OH)-D₃] concentration in blood serum. Chicken egg albumin (OVA)-immunized goats produced low anti-OVA immunoglobulin G (IgG) responses. In contrast, OVA-immunized goats fed vitamin D₃ within the soy protein isolate-stachyose emulsion gel diet strongly stimulated antibody production. These results show that anti-OVA IgG responses can be modulated in dairy goats using vitamin D₃, particularly if this vitamin is delivered in the form of emulsion gel. The results seem to depend on the highly hydrated gel matrix of soy protein isolate-stachyose at the low pH of the stomach as monitored by oxygen-17 (¹⁷O) and proton (¹H) nuclear magnetic resonance (NMR). In addition, the prebiotic nature of stachyose may boost beneficial gut bacteria, most notably for immune health and reducing the risk of infectious diseases. Full article

Geopolymers represent an innovative and environmentally sustainable alternative to traditional construction materials, offering significant potential for reducing anthropogenic CO₂ emissions. Among these, phosphoric acid-activated metakaolin-based systems have attracted increasing attention for their chemical and thermal resilience. In this study, we present a comprehensive structural and mechanical evaluation of metakaolin-based geopolymers synthesized across a wide range of Al/P molar ratios (0.8–4.0). Six formulations were systematically prepared and analyzed using X-ray powder diffraction (XRPD), small-angle X-ray scattering (SAXS), Fourier-transform infrared spectroscopy (FTIR), solid-state nuclear magnetic resonance (ssNMR), and complementary mechanical testing. The novelty of this work lies in the integrated mapping of composition–structure–property relationships across the broad Al/P spectrum under controlled synthesis, combined with the rare application of SAXS to reveal composition-dependent nanoscale domains (~18–50 nm). We identify a stoichiometric window at Al/P ≈ 1.5, where complete acid consumption leads to a structurally homogeneous AlVI–O–P network, yielding the highest compressive strength. In contrast, acid-rich systems exhibit divergent flexural and compressive behaviors, with enhanced flexural strength linked to hydrated silica domains arising from metakaolin dealumination, quantitatively tracked by ²⁹Si MAS NMR. XRPD further reveals the formation of uncommon Si–P crystalline phases (SiP₂O₇, Si₅P₆O₂₅) under low-temperature curing in acid-rich compositions. Together, these findings provide new insights into the nanoscale structuring, phase evolution, and stoichiometric control of silica–alumino–phosphate geopolymers, highlighting strategies for optimizing their performance in demanding thermal and chemical environments. Full article

Polyscias fruticosa (L.) Harms, a Southeast Asian medicinal plant of the Araliaceae family, has gained increasing attention due to its rich phytochemical profile and potential pharmacological applications. This review provides an up-to-date synthesis of biotechnological strategies and chemical investigations related to this species. In vitro propagation methods, including somatic embryogenesis, adventitious root, and cell suspension cultures, are discussed with emphasis on elicitation and bioreactor systems to enhance the production of secondary metabolites. Phytochemical analyses using gas chromatography–mass spectrometry (GC-MS), high-performance liquid chromatography (HPLC), and nuclear magnetic resonance (NMR) have identified over 120 metabolites, including triterpenoid saponins, polyphenols, sterols, volatile terpenoids, polyacetylenes, and fatty acids. Several compounds, such as tocopherols, conjugated linoleic acids, and alismol, were identified for the first time in the genus. These constituents exhibit antioxidant, anti-inflammatory, antimicrobial, antidiabetic, anticancer, and neuroprotective activities, with selected saponins (e.g., chikusetsusaponin IVa, Polyscias fruticosa saponin [PFS], zingibroside R1) showing confirmed molecular mechanisms of action. The combination of biotechnological tools with phytochemical and pharmacological evaluation supports P. fruticosa as a promising candidate for further functional, therapeutic, and nutraceutical development. This review also identifies knowledge gaps related to compound characterization and mechanistic studies, suggesting future directions for interdisciplinary research. Full article

Phytopathogenic fungi secrete numerous effector proteins to disrupt plant defenses. At present, their sequence–structure–function relationships remain poorly understood owing to their diversity. Comprehensive understanding of conserved effectors is necessary to elucidate the molecular relationship between fungi and plants. To fill this research gap, we investigated the Colletotrichum higginsianum effector candidate (ChEC)-88 specifically expressed during infection. Notably, similar to the biotrophy-associated secreted protein 3 (BAS3) from Pyricularia oryzae, ChEC88 inhibited plant cell death caused by necrosis- and ethylene-inducing peptide 1-like protein (NLP1). Nuclear magnetic resonance analysis results revealed that ChEC88 adopted a novel pseudo two-fold symmetrical three-dimensional structure. Homology modeling suggested that BAS3 exhibited a ChEC88-like conformation despite sharing less than 50% sequence identity. Through PSI-BLAST searches, we found that ChEC88 homologs were conserved in various hemibiotrophic phytopathogenic fungi, including Colletotrichum, P. oryzae, and Fusarium species. Functional assays demonstrated that all of the representative homologs suppressed NLP1-induced plant cell death. Mutation experiments identified the residues critical for ChEC88 function. Overall, our findings suggest that hemibiotrophic phytopathogenic fungi share a conserved immune-suppression strategy mediated by ChEC88-like proteins and that such effectors possibly originated from a common ancestral lineage of phytopathogenic fungi. Full article

Meat analog manufacturing via high-moisture extrusion technology is a complex process wherein the properties of protein materials constitute a critical determining factor. In this study, we enhanced the fiber structure properties of high-moisture extruded peanut protein-based meat analogs by incorporating different starches (cassava starch, acetyl distarch phosphate [ADSP], and hydroxypropyl starch) to address challenges in water retention, emulsification, and digestibility. The impact of the starch content (0, 3, 6, 9, 12%) was assessed using low-field nuclear magnetic resonance, ultraviolet/fluorescence spectroscopy, differential scanning calorimetry, sodium dodecyl sulfate–polyacrylamide gel electrophoresis, and functional tests. Compared with controls without starch, adding 6% ADSP significantly improved the water retention by forming a dense, charged network, reducing T_2b (0.37 ms) and T₂₂ (175.30 ms). ADSP (12%) enhanced the emulsification (activity index 10.28 m²/g, stability index 75%); the cassava starch (12%) increased the in vitro protein digestibility to 83% due to amylopectin degradation. Hydroxypropyl starch (6%) elevated the thermal stability (peak temperature 125.71 °C) by forming a viscous protective matrix (p < 0.05). Ultraviolet and fluorescence spectra indicated protein–starch interactions, with ADSP inducing the most pronounced conformational changes. This study demonstrated that the starch type and concentration critically modulate protein–starch interactions, offering guidance for enhancing the quality of meat analogs. Full article

P-glycoprotein (Pgp) plays a significant role in the disposition of cardiac glycoside (CG) drugs across the cell membrane. The relatively narrow therapeutic indices of these drugs, coupled with the co-administration of drugs that inhibit Pgp’s transport mechanism, often cause an increased level of CG in the patient’s plasma, resulting in fatal arrhythmia. Therefore, understanding the underlying mechanism of the CG–Pgp interaction is necessary to circumvent Pgp-mediated transport and effectively design next-generation CGs. In this study, we conducted a comparative analysis to examine the interaction with Pgp and further understand the Pgp-mediated transport of digoxin, digitoxin, digoxigenin, and digitoxigenin. Through the drug-induced kinetic studies of Pgp, our findings suggest that each of the four drugs tested has a single binding site within Pgp. The CG–Pgp binding studies demonstrated that digoxin, digitoxin, and digoxigenin had relatively higher binding affinities. The CG-mediated conformational changes in Pgp indicated that each of the drugs shifts Pgp to an “outward-open” conformation in a nucleotide-dependent manner. STDD NMR indicated that the protons within the δ-lactone ring and the tri-D-digitoxose sugar moieties (glycones) predominantly interact with Pgp. Finally, a model was proposed for CG-induced Pgp-mediated ATP hydrolysis and transport by integrating our data with previously published Pgp-mediated CG transport results. Full article

This study presents the results of a study of the synthesis and properties of 2-hydroxy-β-cyclodextrin functionalized by silver nanoparticles and its loading with a bioactive component. As a reducing agent and stabilizer, 2-Hydroxy-β-cyclodextrin (2gβCD) was used in the production of silver nanoparticles. The use of 2gβCD-AgNPs in loading molecules of the plant alkaloid lupinine (Lup) and its acetyl derivative (Lac) with bactericidal properties were studied. The formation of Lup-2gβCD-AgNPs and Lac-2gβCD-AgNPs was confirmed by UV spectroscopy and X-ray diffraction spectroscopy (XRD). Transmission electron microscopy (TEM) showed that the synthesized AgNPs had a spherical shape. ¹H-, ¹³C-NMR nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy (FT-IR) confirmed the reduction and encapsulation of AgNPs by 2gβCD. Thermographic data show that the obtained Lup and its derivative inclusion complexes reduced energy barriers. This makes them promising components for thermosensitive functional materials. Encapsulated complexes of Lup and its acetate inclusion with silver nanoparticles demonstrated significantly (p < 0.05) higher antibacterial, cytotoxic, and moderately pronounced analgesic activity. Full article

Functional hydrogels have significant potential for applications in the pharmaceutical, agricultural, and environmental sectors. This study focuses on the synthesis of polyampholytic hydrogels through free radical polymerization using functionalized chitosans. The chitosan was modified with mono and disulfonic groups at different temperatures (25 °C and 60 °C) and reaction times (1, 8, 24 h), followed by further modification with glycidyl methacrylate to introduce vinyl groups into the polymers structure. The modified polymers were analyzed using proton nuclear magnetic resonance, Fourier transform infrared, scanning electron spectroscopy, thermogravimetric analysis, and solubility tests. Specifically, 0.74 mmol/g and 1.58 mmol/g of the primary amine groups available in the chitosan chain (out of a total of 4.93 mmol/g) were substituted with mono- and disulfonic groups, respectively. Following treatment with glycidyl methacrylate, 3.39 mmol/g and 2.21 mmol/g of the remaining primary amine groups in the mono- and disulfonic polymers, respectively, were substituted. The hydrogels obtained by the modified polymers at optimal conditions of 1 h and 25 °C, were characterized by the techniques already mentioned in addition to rheological tests, and water absorption studies across different pHs. The hydrogels demonstrated potential for environmental remediation, particularly in adsorptions of ciprofloxacin (CPX) and copper (Cu²⁺) from aqueous solutions at pH 7, achieving adsorption efficiencies of 24–25% for CPX and 83% for Cu²⁺. The results suggest that the synthesized hydrogels could provide an eco-friendly and efficient solution to challenges in wastewater treatment. Full article

Developing a rapidly gel-forming, in situ sprayable hydrogel with wound dressing functionality is essential for enhancing the wound healing process. In this study, a novel sprayable hydrogel-based wound dressing was developed by combining thermo- and pH- responsive polymers including Pluronic F127 (PF127) and N-succinyl chitosan (NSC). NSC was prepared by modifying chitosan with succinic anhydride, as confirmed by Fourier-transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The NSC synthesized using a succinic anhydride-to-chitosan molar ratio of 5:1 exhibited the highest degree of substitution, resulting in a water-soluble polymer effective over a broad pH range. The formulation process of the PF127:NSC sprayable hydrogel was optimized and evaluated based on its sol–gel phase transition behavior, clarity, gelation time, liquid and moisture management, stability, and cytotoxicity. These properties can be suitably tailored by adjusting the concentrations of PF127 and NSC. Moreover, the antioxidant capacity of the hydrogels was enhanced by incorporating Azadirachta indica (neem) extract, a bioactive compound, into the optimized sprayable hydrogel. Both neem release and antioxidant activity increased in a dose-dependent manner. Overall, the developed sprayable hydrogel exhibited favorable sprayability, appropriate gelation properties, controlled drug release, and antioxidant activity, underscoring its promising translational potential as a wound dressing. Full article

Background: Charcot–Marie–Tooth (CMT) is a group of inherited diseases impairing the peripheral nervous system. CMT originates from genetic variants that affect proteins fundamental for the myelination of peripheral nerves and survival. Moreover, environmental and humoral factors can impact disease development and evolution. Currently, no therapy is available. Metabolomics is an emerging field of biomedical research that enables the development of novel biomarkers for neurodegenerative diseases by targeting metabolic pathways or metabolites. This study aimed to evaluate the metabolomics profile of CMT disease by comparing patients with healthy individuals. Methods: A total of 22 CMT patients (CMT) were included in this study and were demographically matched with 26 healthy individuals (C). Serum samples were analyzed through Nuclear Magnetic Resonance spectroscopy, and multivariate and univariate statistical analyses were subsequently applied. Results: A supervised model showed a clear separation (R²X = 0.3; R²Y = 0.7; Q² = 0.4; p-value = 0.0004) between the two classes of subjects, and nine metabolites were found to be significantly different (2-hydroxybutyrate, 3-hydroxybutyrate, 3-methyl-2-oxovalerate, choline, citrate, glutamate, isoleucine, lysine, and methyl succinate). The combined ROC curve showed an AUC of 0.94 (CI: 0.9–1). Additional altered metabolic pathways were also identified within the disease context. Conclusion: This study represents a promising starting point, demonstrating the efficacy of metabolomics in evaluating CMT patients and identifying novel potential disease biomarkers. Full article

4,4’-Methylenebis(N,N-diglycidylaniline) (AG80), as a high-performance thermosetting material, holds significant application value due to the enhancement of its strength, toughness, and thermal stability. However, conventional toughening methods often lead to a decrease in material strength, limiting their application. Modification of AG80 epoxy resin was performed using hydroxy-terminated polyphenylpropylsiloxane (Z-6018) and a self-synthesized epoxy compatibilizer (P/E30) to regulate the phase structure of the modified resin, achieving a synergistic enhancement in both strength and toughness. The modified resin was characterized by Fourier transform infrared analysis (FTIR), proton nuclear magnetic resonance (¹H NMR) spectroscopy, silicon-29 nuclear magnetic resonance (²⁹Si NMR) spectroscopy, and epoxy value titration. It was found that the phase structure of the modified resin significantly affects mechanical properties. Thus, P/E30 was introduced to regulate the phase structure, achieving enhanced toughness and strength. At 20 wt.% P/E30 addition, the tensile strength, impact strength, and fracture toughness increased by 50.89%, 454.79%, and 152.43%, respectively, compared to AG80. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses indicate that P/E30 regulates the silicon-rich spherical phase and interfacial compatibility, establishing a bicontinuous structure within the spherical phase, which is crucial for excellent mechanical properties. Additionally, the introduction of Z-6018 enhances the thermal stability of the resin. Full article

The transition to sustainable energy systems demands efficient recycling methods for critical raw materials like lithium. In this study, we present a new class of pH- and light-switchable flotation collectors based on isomeric derivatives of the natural product Punicine, termed inverse Punicines. These amphoteric molecules were synthesized via a straightforward four-step route and structurally tuned for hydrophobization by alkylation. Their performance as collectors was evaluated in microflotation experiments of lithium aluminate (LiAlO₂) and silicate matrix minerals such as melilite and calcium silicate. Characterization techniques including ultraviolet-visible (UV-Vis), nuclear magnetic resonance (NMR) and electron spin resonance (ESR) spectroscopy as well as contact angle, zeta potential (ζ potential) and microflotation experiments revealed strong pH- and structure-dependent interactions with mineral surfaces. Notably, N-alkylated inverse Punicine derivatives showed high flotation yields for LiAlO₂ at pH of 11, with a derivative possessing a dodecyl group attached to the nitrogen as collector achieving up to 86% recovery (collector conc. 0.06 mmol/L). Preliminary separation tests showed Li upgrading from 5.27% to 6.95%. Radical formation and light-response behavior were confirmed by ESR and flotation tests under different illumination conditions. These results demonstrate the potential of inverse Punicines as tunable, sustainable flotation reagents for advanced lithium recycling from complex slag systems. Full article

The advancement of non-thermal disinfection technologies represents a critical pathway for ensuring food safety, meeting environmental sustainability requirements, and meeting consumer preferences for clean-label products. This study systematically evaluated the combined preservation effect of ultrasonic-assisted slightly acidic electrolyzed water (US+SAEW) on mirror carp fillets during refrigeration. Results demonstrated that US+SAEW exhibited superior antimicrobial efficacy compared to individual US or SAEW, achieving reductions of 0.73, 0.74, and 0.79 log CFU/g in total viable counts (TVC), Aeromonas bacteria, and lactic acid bacteria counts compared to the control, respectively. Furthermore, the combined intervention significantly suppressed microbial proliferation throughout the refrigeration period while simultaneously delaying protein and lipid degradation/oxidation induced by spoilage bacteria, thereby inhibiting the formation of alkaline nitrogenous compounds. Consequently, lower levels of pH, total volatile basic nitrogen (TVB-N), protein carbonyl, and thiobarbituric acid reactive substances (TBARS) were observed in US+SAEW compared to the other treatments. Multimodal characterization through low-field nuclear magnetic resonance (LF-NMR), texture, and color analysis confirmed that US+SAEW effectively preserved quality characteristics, extending the shelf life of mirror carp fillets by four days. This study provides a novel non-thermal preservation strategy that combines microbial safety maintenance with quality retention, offering particular advantages for thermolabile food. Full article