Search Results (106)

Surgical dead spaces are challenging to handle with current preventive methods. Tissue adhesives show promise in obliterating ‘dead spaces’, but the drawbacks of currently available adhesives prevent them from being used for dead space elimination. An adhesive powder based on N-Hydroxysuccinimide-poly(2-oxazoline), NHS-POx, combines robust adhesive strength in moist environments with favorable biocompatibility and biodegradability, which makes this an interesting candidate for eliminating spaces that remain between tissues after surgery. The current study evaluates the swelling, crosslinking speed, and degradation properties of this novel tissue adhesive. These results were then used to design multiple adhesive variants differing in pH, surfactant addition, and particle size, which were subsequently examined based on their wetting rates, adhesive strength, and durability. The powder displayed minimal swelling and rapid crosslinking properties, by which the latter could be increased by a basic buffer or surfactant addition and reduced by increasing particle size. The wetting rate of the powder increased when a surfactant (Pluronic F68) was added to the mix. The adhesive strength, as measured by tensile and shear strength measurements of different prototypes of the adhesive powder, was significantly better than that of a commercially available fibrin glue. The addition of both buffer and Pluronic F68 led to a breakdown of adhesive force after 14 days of incubation, while the prototype containing neither buffer nor Pluronic F68 still had measurable adhesive force after 14 days of incubation. The current study results display several characteristics of the NHS-POx-based tissue adhesive that are favorable for tissue approximation, preventing the occurrence of dead spaces. The most effective and usable adhesive prototype will be identified in further ex vivo and in vivo animal model studies. Full article

Background/Objectives: This study aimed to develop a novel amorphous solid dispersion (ASD) platform using poly(2-ethyl-2-oxazoline) (PEtOx) for the solubility enhancement of poorly water-soluble drugs. Fenofibrate (FB), a Biopharmaceutics Classification System (BCS) Class II drug, was selected as the model drug. The novelty of this work lies in the formulation of dual-matrix systems by blending PEtOx of varying molecular weights (50 kDa, 200 kDa, 500 kDa) with solubility-enhancing polymers, Soluplus^® and Kollidon^® VA64, to investigate component compatibility, synergistic solubility enhancement, and the influence of PEtOx molecular weight on drug release. Methods: ASDs were prepared via hot-melt extrusion (HME) and characterized using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and Fourier transform–infrared spectroscopy (FTIR) to confirm FB amorphization and evaluate drug–polymer interactions. In vitro dissolution testing was performed to assess drug release performance, and stability studies were conducted at ambient conditions for one month to evaluate physical stability. Results: DSC, PXRD, and FTIR confirmed the successful amorphization of FB and good miscibility between PEtOx and the selected excipients. In vitro dissolution studies showed an 8–12-fold increase in FB release from ASDs compared to crystalline drug. Lower-molecular-weight PEtOx grades yielded faster release profiles, while binary blends with Soluplus^® or Kollidon^® VA64 enabled tailored drug release. Stability testing indicated that all formulations maintained their amorphous state over one month. Conclusions: PEtOx-based ASDs represent a versatile platform for enhancing the solubility and dissolution of poorly water-soluble drugs. By adjusting polymer molecular weight and combining with complementary excipients, release profiles can be optimized to achieve improved performance and stability. Full article

Background/Objectives: The study describes the elaboration and evaluation of thermosensitive niosomes intended for the systemic application of daunorubicin hydrochloride. The attained stimulus sensitivity would determine the release of the chemotherapeutic predominantly at the target site, which ensures a higher drug concentration and leads to reduced systemic toxicity. The latter is highly beneficial, as the anthracycline antibiotic is known for its dose-dependent cardiotoxic effects. Methods: Conventional and copolymer-modified niosomes were prepared via thin-film hydration and the transmembrane ammonium gradient method, allowing us to assess the impacts of copolymer type-DHP-PiPOX (1,3-dihexadecyl-propane-2-ol-poly(2-isopropyl-2-oxazoline)) or DHP-PETEGA (1,3-dihexadecyl-propane-2-ol-poly(ethoxytriethylene glycol acrylate)) and their concentrations (0.5, 1, and 2.5 mol%), as well as the method of preparation, on the main physicochemical properties of the vesicles. Niosomes were characterized in terms of their size, polydispersity index (PDI), zeta potential, entrapment efficiency, morphology, and drug release properties. Thermosensitivity was evaluated by fluorescence studies, and the antiproliferative activity of optimized formulations was assessed against the acute myelocyte leukemia-derived HL-60 cell line. Results: Daunorubicin-loaded niosomes modified with DHP-PiPOX and DHP-PETEGA at 2.5 mol% exhibited suitable physicochemical properties for systemic application, with sizes below 200 nm (155 and 158 nm respectively), low PDI values of 0.25 and 0.29, spherical morphology, and high daunorubicin entrapment efficiency (68.6 and 66.5% respectively). The vesicles showed temperature-dependent drug release properties and superior antiproliferative activity compared to the free daunorubicin (IC₅₀ values of 6.91 and 8.54 vs. 12.14). Conclusions: The obtained results indicate that the developed thermosensitive nanovesicles may serve as a suitable drug delivery system for the systemic application of daunorubicin hydrochloride. Full article

Poly(2-oxazoline) coatings with antibiofouling properties and good biocompatibility can also be deposited by the plasma polymerization method using 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline as monomers. Plasma polymers are formed of various monomer fragments and recombination products. Commonly, plasma polymers are highly crosslinked structures created by many different fragments, preferably of no repeating unit. Thus, chemical analysis of plasma polymers is difficult. To obtain a better description of plasma polymerized poly(2-oxazoline) coatings, the analysis of their plasma deposition process was performed. The electron ionization of 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline molecules was studied using the crossed electron–molecular beam technique with mass spectrometric detection of the produced ions. The chemical composition of gaseous compounds at plasma polymerization was determined by gas chromatography-mass spectrometry (GC-MS), ion mobility spectrometry (IMS) and optical emission spectroscopy (OES). Also, the chemical composition and antibacterial activity of the water leachates from previously deposited poly(2-oxazoline) films were tested using FTIR spectroscopy and the disk diffusion method, respectively. It was found that acetonitrile and propionitrile are the main neutral products created in the nitrogen discharge with 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline monomers. The water leachates from deposited films do not exhibit any antibacterial activity. It was concluded that the antibacterial properties of POx films are due to their hydrophility. Full article

Alzheimer’s disease is the most widespread neurodegenerative disease in the world. Galantamine hydrobromide (GH) is one of the drugs used to treat mild to moderate dementia of the Alzheimer type. Due to the fact that the specificity of the disease requires maximally facilitated intake, orodispersible films present such an opportunity. In the present study orodispersible films based on poly(2-ethyl-2-oxazoline) as well as partially hydrolyzed poly(2-ethyl-2-oxazoline) were prepared and studied as delivery systems for GH. Two samples of partially hydrolyzed PEtOx were synthesized—one of relatively low degree of hydrolysis and another one of relatively high degree of hydrolysis, and studied by Nuclear Magnetic Resonance (NMR). Cytotoxicity assay was performed that validated the low hydrolyzed derivative as biocompatible polymer that maintained desirable physicochemical characteristics without compromising the safety, thereby it was selected for further research. The films were prepared by the solution casting method and characterized by different methods. FTIR was used to determine the potential interactions between the galantamine molecule and the film components. Based on the Thermogravimetric Analysis (TGA) conducted, it was concluded that all films were sufficiently thermally stable, as the component decomposition stage (after initial solvent removal) began above 180 °C. The polymer films were further characterized with the determination of Shore hardness and the results showed that the films containing glycerol as a plasticizer exhibited higher hardness compared to those with PEG as a plasticizer. The disintegration time of the films was determined visually using Petri dishes and it was found that the films disintegrated within the range of 0.52 to 1.58 min, fully meeting the pharmacopoeial requirements. GH release profiles in PBS at 37 °C were obtained, and it was found that by the second minute, 80–90% of the drug were released from the different films, and the release followed an anomalous diffusion mechanism (Case II). Full article

Bacterial adhesion and the subsequent formation of biofilms and biofouling have significant economic and health impacts across all sectors. They are especially impactful in industrial corrosion, healthcare, food processing, agriculture, and waste and drinking water. Synthetic polymers that resist bacterial adhesion are adaptable to a wide range of applications in all of these fields. While there are many bacteria-resistant polymers, some of the best performing include polyethylene glycol (PEG), poly(oxazoline) (POZ), and zwitterionic polymers, with zwitterionic polymers showing the most promise with reductions in bacteria adhesion up to 99% over controls. This review summarizes the demonstrated bacterial resistance performance of these polymer coatings based on literature published over the last ten years. It also identifies the front runners for preventing bacterial adhesion while providing the critical next steps for widespread adoption of this technology. Full article

This work is part of a current and essential issue aiming to find a solution for the replacement of chromium(VI) and cadmium in the surface treatment process applied to electrical connectors. The application of a protective coating obtained by the sol–gel route proves to be an interesting alternative method and numerous studies describe efficient anticorrosion coatings to protect various metallic alloys. The issue of electrical connectors made of 6061 alloy is to combine anticorrosion protection and electrical conduction, which are antagonistic properties, so multifunctional sol–gel coatings and/or architectures have to be synthesized and shaped on connectors. In this work, several experimental parameters, such as the type of carbon filler, the hydrolysis ratio, the precursors’ introduction order are studied and evaluated to achieve industrial requirements. Thus, aqueous suspensions of carbon fillers have been introduced into sol–gel formulations to give rise to conductive coatings (200–500 mΩ_□) with high anticorrosion properties (500 h NSS resistance), in which thickness is less than 10 microns. The incorporation of organic additives poly(2-ethyl-2-oxazoline) or hydroxypropylmethylcellulose positively impacts the flash point of the sol (>60 °C) making the sol–gel process compatible with the HSE recommendation and the ATEX standard. Full article

The significant waste generated by the fashion industry necessitates sustainable textile recycling strategies. Polyester, made from poly(ethylene terephthalate) (PET), is abundant in post-consumer textiles. Technologies have been developed to convert low-density garment waste into flakes, but the role of color sorting in achieving uniform aesthetics in injection-moldable plastics remains underexplored. This study compares materials extruded from dark color-sorted polyester garment flakes with those from light-color flakes in terms of processability in extrusion and injection molding. The properties examined include melt fluidity, injection molding shrinkage, and mechanical and thermal properties. Commercial chain extenders with anhydride, oxazoline, or epoxide reactive groups were added during extrusion. Interestingly, only dark-colored extruded pellets showed significant degradation, but all the chain extenders allowed melt fluidity to be controlled during reprocessing. The bisoxazoline-based additive was the most promising, due to the highly improved ductility of the samples, regardless of whether they were dark-colored or light-colored. The results indicate significant potential for the industrial recycling of post-consumer textiles and highlight the industrial feasibility of repurposing post-consumer polyester garments. This approach not only supports initiatives of circular economy but also offers a viable solution for managing textile waste, particularly in the fashion industry. Additionally, the suggested recycling route combats the production of microplastics. Full article

Poly(2-oxazoline) (POx), a typical thermoresponsive polymer with good biocompatibility, was conjugated with environment-sensitive tetraphenylenethene (TPE) and hydroxyphenylbenzoxazole (HBO) to achieve unique thermometer readings. Through phase transition induced by temperature, the thermometers can measure temperature in biologic range with ratiometric fluorescence response, ultrahigh sensitivity and good reversibility. Moreover, the thermometer can be used to measure the change in temperature with large fluorescence difference in living cells. Full article

Conjugated polymers (CPs), in particular poly(p-phenylene vinylene)s (PPVs), are recognized as “smart” materials with potential applications ranging from optoelectronic devices to emergent technologies and to precision medicine. The present communication reports on the synthesis and structural characterization of new dibrominated macromonomers and their derived PPVs, of rod–graft–coil architecture, whose grafted, biocompatible and hydrophilic side chains are either PEG-2000 or poly(2-methyl-2-oxazoline) or poly(2-ethyl-2-oxazoline). The Suzuki–Heck cascade reaction was used for PPVs’ obtainment. After PPVs’ structural characterization using specific techniques (such as ¹H-NMR; GPC), the micellar, fluorescent nanoparticles formed by spontaneous self-assembling during simple direct dissolution in water were evaluated using dynamic light scattering for their size, complementarily combined with Atom Force Microscopy (AFM) for their shape assessing. The PPV micelles’ photophysical properties were revealed using UV-vis spectroscopy and fluorescence measurements. Full article

Nanocomposites with a natural rubber (NR) matrix containing organomodified montmorillonite (MMT) as a precursor of nanoparticles were prepared using two different polyoxazolines as surface modifiers of the MMT. The materials were characterized by X-ray diffraction, transmission electronic microscopy and ultimate mechanical properties, and parameters obtained by DMTA method (storage and loss moduli and loss tangent) were determined. It was found that the effect of nanofillers presence has a significant effect on tensile strength as well as elongation at break, which are higher for materials with higher viscosity due to the presence of carbon blacks compared to the composites without carbon blacks. From the two modifiers, poly(2-ethyl-2-oxazoline) was identified as a prospective modifier for surface modification of MMT used as the possible additive for tyre treads exhibiting optimal balance between fuel consumption and safety of driving concerning breaking action and lateral breakaway. Full article

Nanomechanical testing plays a crucial role in evaluating surfaces containing nanoparticles. Testing verifies surface performance concerning their intended function and detects any potential shortcomings in operational standards. Recognising that nanostructured surfaces are not always straightforward or uniform is essential. The chemical composition and morphology of these surfaces determine the end-point functionality. This can entail a layered surface using materials in contrast to each other that may require further modification after nanomechanical testing to pass performance and quality standards. Nanomechanical analysis of a structured surface consisting of a poly-methyl oxazoline film base functionalised with colloidal gold nanoparticles was demonstrated using an atomic force microscope (AFM). AFM nanomechanical testing investigated the overall substrate architecture’s topographical, friction, adhesion, and wear parameters. Limitations towards its potential operation as a biomaterial were also addressed. This was demonstrated by using the AFM cantilever to apply various forces and break the bonds between the polymer film and gold nanoparticles. The AFM instrument offers an insight to the behaviour of low-modulus surface against a higher-modulus nanoparticle. This paper details the bonding and reaction limitations between these materials on the application of an externally applied force. The application of this interaction is highly scrutinised to highlight the potential limitations of a functionalised surface. These findings highlight the importance of conducting comprehensive nanomechanical testing to address concerns related to fabricating intricate biomaterial surfaces featuring nanostructures. Full article

The ability of thermoresponsive polymers to respond to temperature with a reversible conformational change makes them promising ‘smart’ materials for solutions in medical and biotechnological applications. In this work, two such polymers and structural isomers were studied: poly(N-isopropyl acrylamide) (PNiPAm) and poly(2-isopropyl-2-oxazoline) (PiPOx). We compare the critical solution temperatures (CST) of these polymers in D₂O and H₂O in the presence of Hofmeister series salts, as results obtained under these different solvent conditions are often compared. D₂O has a higher dipole moment and electronegativity than H₂O, which could significantly alter the CST transition. We used two complementary methods to measure the CST, dynamic light scattering (DLS) and differential scanning calorimetry (DSC) and found that the CST decreased significantly in D₂O compared to H₂O. In the presence of highly concentrated kosmotropes, the CST of both polymers decreased in both solvents. The influence of the kosmotropic anions was smaller than the water isotope effect at low ionic strengths but considerably higher at physiological ionic strengths. However, the Hofmeister anion effect was quantitatively different in H₂O than in D₂O, with the largest relative differences observed for Cl⁻, where the CSTs in D₂O decreased more than in H₂O measured by DLS but less by DSC. PiPOx was more sensitive than PNiPAm to the presence of chaotropes. It exhibited much higher transition enthalpies and multistep transitions, especially in aqueous solutions. Our results highlight that measurements of thermoresponsive polymer properties in D₂O cannot be compared directly or quantitatively to application conditions or even measurements performed in H₂O. Full article

Functional polymers play an important role in various biomedical applications. From many choices, poly(2-isopropenyl-2-oxazoline) (PIPOx) represents a promising reactive polymer with great potential in various biomedical applications. PIPOx, with pendant reactive 2-oxazoline groups, can be readily prepared in a controllable manner via several controlled/living polymerization methods, such as living anionic polymerization, atom transfer radical polymerization (ATRP), reversible addition–fragmentation transfer (RAFT) or rare earth metal-mediated group transfer polymerization. The reactivity of pendant 2-oxazoline allows selective reactions with thiol and carboxylic group-containing compounds without the presence of any catalyst. Moreover, PIPOx has been demonstrated to be a non-cytotoxic polymer with immunomodulative properties. Post-polymerization functionalization of PIPOx has been used for the preparation of thermosensitive or cationic polymers, drug conjugates, hydrogels, brush-like materials, and polymer coatings available for drug and gene delivery, tissue engineering, blood-like materials, antimicrobial materials, and many others. This mini-review covers new achievements in PIPOx synthesis, reactivity, and use in biomedical applications. Full article

In vitro diagnostic methods face non-specific interactions increasing their background level and influencing the efficacy and reproducibility. Currently, the most important and employed blocker of non-specific interactions is bovine serum albumin (BSA), an animal product with some disadvantages like its batch-to-batch variability and contamination with RNases. Herein, we developed amphiphilic water-soluble synthetic copolymers based on the highly biocompatible, non-immunogenic and nontoxic N-2-(hydroxypropyl)methacrylamide (HPMA)-based copolymers or poly(oxazoline)s as highly effective synthetic blockers of non-specific interactions and an effective BSA alternative. The highest blocking capacity was observed for HPMA-based polymers containing two hydrophobic anchors taking advantage of the combination of two structurally different hydrophobic molecules. Polymers prepared by free radical polymerisation with broader dispersity were slightly better in terms of surface covering. The sandwich ELISA evaluating human thyroid-stimulating Hormone in patient samples revealed that the designed polymers can fully replace BSA without compromising the assay results. Importantly, as a fully synthetic material, the developed polymers are fully animal pathogen-free; thus, they are highly important materials for further development. Full article