Search Results (262)

This paper presents a radiation-hardened 4-bit flash analog-to-digital converter (ADC) implemented in a 22 nm fully depleted silicon-on-insulator (FD-SOI) process for high-reliability applications in radiation environments. To improve single-event upsets (SEU) tolerance, the design introduces a compact fault-tolerant logic scheme based on Dual Modular Redundancy (DMR), offering reliability comparable to Triple Modular Redundancy (TMR) while using two storage nodes instead of three, and a simple XOR-based check in place of a majority voter. A distributed sampling architecture mitigates SEU vulnerabilities in the input path, while thin-oxide devices are used in analog-critical circuits to enhance total ionizing dose (TID) resilience. Post-layout simulations demonstrate SEU detection within 200 ps and correction within ~600 ps. The ADC achieves an active area of 0.089 mm², power consumption below 30 µW, and provides a scalable solution for radiation-tolerant data acquisition in aerospace and other high-reliability systems. Full article

The increasing sophistication of cyberattacks makes Intrusion Detection Systems (IDSs) essential, yet the high dimensionality of modern network traffic hinders accuracy and efficiency. We conduct a comparative study of multi-objective feature selection for IDS using four bio-inspired metaheuristics—Grey Wolf Optimizer (GWO), Genetic Algorithm (GA), Particle Swarm Optimization (PSO), and Ant Colony Optimization (ACO)—on the X-IIoTID dataset. GA achieved the highest accuracy (99.60%) with the lowest FPR (0.39%) using 34 features. GWO offered the best accuracy–subset balance, reaching 99.50% accuracy with 22 features (65.08% reduction) within 0.10 percentage points of GA while using ~35% fewer features. PSO delivered competitive performance with 99.58% accuracy, 32 features (49.21% reduction), FPR 0.40%, and FNR 0.44%. ACO was the fastest (total training time 3001 s) and produced the smallest subset (7 features; 88.89% reduction), at an accuracy of 97.65% (FPR 2.30%, FNR 2.40%). These results delineate clear trade-off regions of high accuracy (GA/PSO/GWO), balanced (GWO), and efficiency-oriented (ACO) and underscore that algorithm choice should align with deployment constraints (e.g., edge vs. enterprise vs. cloud). We selected this quartet because it spans distinct search paradigms (hierarchical hunting, evolutionary recombination, social swarming, pheromone-guided foraging) commonly used in IDS feature selection, aiming for a representative, reproducible comparison rather than exhaustiveness; extending to additional bio-inspired and hybrid methods is left for future work. Full article

Rocket launches constitute a major anthropogenic source of disturbance in the near-Earth space environment, inducing significant ionospheric perturbations through both chemical and dynamic mechanisms. This study presents a systematic analysis of ionospheric disturbances—specifically, electron density depletion and traveling ionospheric disturbances (TIDs)—triggered by four rocket launches from China’s Jiuquan Satellite Launch Center between 2023 and 2025. Using high-rate, multi-constellation GNSS data from 370 ground stations and BeiDou GEO satellites, we extracted total electron content (TEC) signals and applied advanced detection methods, including the Multi-Rolling-Multi-Image-Tracking (MRMIT) algorithm for depletion identification and a parametric integration framework for quantitative comparison. Our results reveal that all launches produced rapid TEC depletions, evolving along the rocket trajectory and peaking within approximately 30 min. Launch mass was the dominant factor controlling depletion intensity, while propellant chemistry (UDMH-based vs. liquid oxygen/methane) and local time/background TEC levels modulated the recovery rate and spatial extent. Additionally, distinct TIDs exhibiting wave-like and V-shaped structures were observed, propagating outward from the trajectory with latitudinal variations in amplitude and waveform. These findings highlight the critical roles of rocket attributes and ambient ionospheric conditions in shaping disturbance characteristics. The study underscores the value of multi-source GNSS networks and novel methodologies in monitoring anthropogenic space weather effects, with implications for GNSS performance and sustainable space operations. Full article

Internet of Things (IoT) networks are constantly exposed to various security challenges and vulnerabilities, including manipulative data injections and cyberattacks. Traditional security measures are often inadequate, overburdened, and unreliable in adapting to the heterogeneous yet diverse nature of IoT networks. This emphasizes the need for intelligent and effective methodologies. In recent times, deep learning models have been extensively used to monitor and detect intrusions in complex applications. The models can effectively learn and understand the dynamic characteristics of voluminous IoT datasets to prompt efficient decision-making predictions. This study proposes a hybrid Convolutional Neural Network and Gated Recurrent Unit (CNN-GRU) algorithm to enhance intrusion detection in IoT environments. The proposed CNN-GRU model is validated using two benchmark datasets: the IoTID20 and BoT-IoT intrusion detection datasets. The proposed model incorporates an effective technique to handle the class imbalance issues that are peculiar to voluminous datasets. The results demonstrate superior accuracy, precision, recall, F1-score, and area under the curve, with a reduced false positive rate compared to similar models in the literature. Specifically, the proposed CNN–GRU achieved up to 99.83% and 99.01% accuracy, surpassing baseline models by a margin of 2–3% across both datasets. These findings highlight the model’s potential for real-time cybersecurity applications in IoT networks and general industrial control systems. Full article

This study aims to evaluate the effects of total ionizing dose (TID) radiation on the performance of n−MOSFET current mirrors. We propose an ovel experimental approach to analyze the interaction between charge trapping in the MOSFET gate oxide and the resulting current mirror degradation by subjecting devices to TID doses from 50 krad(Si) to 300 krad(Si) using a 60Co gamma source Experimental data show that threshold voltage shifts by up to 1.31 V and transconductance increases by 27%. This degradation leads to this a reduction of more than 10% in current mirror output accuracy occurs at the highest dose. These quantitative criteria establish a clear benchmark for assessing the impact of TID on current mirror performance. These effects are attributed to positive charge trapping in the gate oxide and at the Si–SiO₂ interface induced by ionizing radiation. This study focuses exclusively on radiation effects; electrical stress phenomena such as over−voltage or electrostatic discharge (ESD) are not addressed. The results highlight the critical importance of accounting for TID effects when designing high−performance n−MOSFET current mirrors for radiation−hardened applications. Full article

Modification of synthetic oligonucleotides and DNA is widely used in many applications in the life sciences. However, in most cases, modified DNA cannot be restored to its native state. Here, we report the preparation of a thymidine-inosine dimer building block (TID) for oligonucleotide synthesis. The TID modification supports the functionalization of synthetic oligonucleotides, which can later be removed to restore the DNA strand to its native state. The TID unit allows for a wide spectrum of postsynthetic modifications of oligonucleotides through click chemistry, including conjugation with fluorescent tags and small molecules, preparation of branched oligonucleotide scaffolds, and anchoring to a solid support. Due to the modification of the thymine base, the TID unit reduces the stability of the DNA duplex. We found that the negative effect of internal TID modification on duplex stability does not exceed the same for a single base mismatch. As long as the TID modification is present in the DNA strand, it disrupts its natural functionality. The “caging” effect of TID in the template strand with respect to DNA polymerase was demonstrated in primer extension experiments. Traceless removal of the temporary functional group occurs through oxidative cleavage of the inosine subunit, resulting in the formation of a native DNA strand with the thymine base left at the cleavage site. An anthracene-modified dodecamer oligonucleotide and a branched oligonucleotide scaffold were used to study the cleavage of the reporter group or the oligonucleotide side strand, respectively. It was shown that aqueous tetramethylguanidine efficiently cleaves the oxidized inosine subunit of TID at 37 °C, forming the native DNA strand. Full article

The growing amount of available experimental data on the Earth’s ionosphere total electron content measurements requires the development of modern data processing instruments. Traveling ionospheric disturbances (TIDs) are one of the ionospheric phenomena that are of great interest. To automate the processing of TEC horizontal distribution maps for studying TIDs, a method for detecting TIDs and their parameters, such as amplitude, speed, and direction of propagation has been developed. It is based on determining the signal-to-noise ratio of TEC variations. The proposed method was used to analyze the TID distribution throughout the United States for more than 40 magnetically quiet days in 2023. The results of the obtained statistical characteristics of the detected TIDs are presented. Full article

Accurate image quality evaluation is essential for optimizing sensor performance and enhancing the fidelity of visual data. The concept of “image style” encompasses the overall visual characteristics of an image, including elements such as colors, textures, shapes, lines, strokes, and other visual components. In this paper, we propose a novel full-reference image quality assessment (FR-IQA) method that leverages the principles of style transfer, which we call style- and content-based IQA (SCIQA). Our approach consists of three main steps. First, we employ a deep convolutional neural network (CNN) to decompose and represent images in the deep domain, capturing both low-level and high-level features. Second, we define a comprehensive deep perceptual distance metric between two images, taking into account both image content and style. This metric combines traditional content-based measures with style-based measures inspired by recent advances in neural style transfer. Finally, we formulate a perceptual optimization problem to determine the optimal parameters for the SCIQA model, which we solve via a convex optimization approach. Experimental results across multiple benchmark datasets (LIVE, CSIQ, TID2013, KADID-10k, and PIPAL) demonstrate that SCIQA outperforms state-of-the-art FR-IQA methods. Specifically, SCIQA achieves Pearson linear correlation coefficients (PLCC) of 0.956, 0.941, and 0.895 on the LIVE, CSIQ, and TID2013 datasets, respectively, outperforming traditional methods such as SSIM (PLCC: 0.847, 0.852, 0.665) and deep learning-based methods such as DISTS (PLCC: 0.924, 0.919, 0.855). The proposed method also demonstrates robust generalizability on the large-scale PIPAL dataset, achieving an SROCC of 0.702. Furthermore, SCIQA exhibits strong interpretability, exceptional prediction accuracy, and low computational complexity, making it a practical tool for real-world applications. Full article

To address the adverse effects of Tuned Inertia Dampers (TIDs) on track slab vibrations while controlling high-frequency rail vibrations, a hybrid Finite Element-Statistical Energy Analysis (FE-SEA) method is developed for modeling the vehicle-track-bridge coupled system. Short-wavelength track irregularities are introduced as high-frequency excitation, and the accuracy and efficiency of this method are validated by comparison with the traditional finite element method (FEM). A vibration control model for track-bridge structures incorporating TIDs is designed, and the effects of the TID’s inertance, stiffness, and damping coefficients on the vertical acceleration responses of the rail and track slab are investigated in detail. The study reveals that although TIDs effectively reduce rail vibrations, they may induce adverse effects on track slab vibrations. Using the vibration acceleration amplitudes of both the rail and track slab as dual control objectives, a multi-objective optimization model is established, and the TID’s optimal parameters are determined using a multi-objective genetic algorithm. The results show that the optimized TID parameters reduce rail acceleration amplitudes by 16.43% and improve the control efficiency by 12.45%, while also addressing the negative effects on track slab vibration. The track slab’s vibration acceleration is reduced by 5.47%, and the vertical displacement and acceleration of the vehicle body are reduced by 14.22% and 47.5%, respectively, thereby enhancing passenger comfort. This study provides new insights and theoretical guidance for vibration control analysis in vehicle-track-bridge coupled systems. Full article

In this paper, a viscoelastic (VE) tuned inerter damper (TID) that replaces conventional stiffness and damping elements with a cost-effective VE element is proposed to achieve a target-based improvement of seismically protected buildings. The semi-analytical solution of the optimal tuning frequency ratio of the VE TID is presented based on a two-degree-of-freedom (2-DOF) system, accounting for inherent structural damping disturbances, and then is extended to a MDOF system via an effective mass ratio. The accuracy of the semi-analytical solution is validated by comparing the numerical solution. Finally, numerical analyses on a viscoelastically damped building and a base-isolated building with optimally designed VE TIDs under historical earthquakes are performed. The numerical results validate the target-based improvement capability of the VE TID with a modest mass ratio in avoiding large strokes or deformation of existing dampers and isolators, and further reducing the specific mode vibration. Full article

Deep neural networks (DNNs) are highly effective for intrusion detection systems (IDS) due to their ability to learn complex patterns and detect potential anomalies within the systems. However, their high resource consumption requirements including memory and computation make them difficult to deploy on low-powered platforms. This study explores the possibility of using knowledge distillation (KD) to reduce constraints such as power and hardware consumption and improve real-time inference speed but maintain high detection accuracy in IDS across all attack types. The technique utilizes the transfer of knowledge from DNNs (teacher) models to more lightweight shallow neural network (student) models. KD has been proven to achieve significant parameter reduction (92–95%) and faster inference speed (7–11%) while improving overall detection performance (up to 6.12%). Experimental results on datasets such as NSL-KDD, UNSW-NB15, CIC-IDS2017, IoTID20, and UAV IDS demonstrate DNN with KD’s effectiveness in achieving high accuracy, precision, F1 score, and area under the curve (AUC) metrics. These findings confirm KD’s ability as a potential edge computing strategy for IoT and UAV devices, which are suitable for resource-constrained environments and lead to real-time anomaly detection for next-generation distributed systems. Full article

This study focuses on the mid- and low-midlatitude ionospheric response to the 2024 Mother’s Day superstorm, utilizing ground-based and Swarm satellite observations. The ground-based ionosonde measured F1, F2-layer, B0 and B1 parameters, as well as isodensity data, were used. The ionospheric absorption was investigated with the so-called amplitude method, which is based on ionosonde data. Auroral sporadic E-layer was the first time ever recorded at Sopron. Moreover, the auroral F-layer appeared at exceptionally low latitude (35° mlat, over San Vito) during the storm main phase. These unprecedented detections were confirmed by optical all-sky cameras. The observations revealed that these events were linked to the extreme equatorward shift of the auroral oval along with the midlatitude trough. As a result, the midlatitude ionosphere became confined to the trough itself. Three stages of F2-layer uplift were identified during the night of 10/11 May, each caused by different mechanisms: most probably by the effect of prompt penetration electric fields (PPEFs) (1), the travelling ionospheric disturbances (TIDs) (2) and the combination of electrodynamic processes and decreased O/N₂ ratio (3). After a short interval of G-condition, an unprecedented extended disappearance of the layers was observed during daytime hours on 11 May, which was further confirmed by Swarm data. This phenomenon appeared to be associated with a reduced O/N₂ along with the influence of disturbance dynamo electric fields (DDEFs) and it cannot be explained only by the increased ionospheric absorption according to the results of the amplitude method. Full article

The combined application of Load Frequency Control (LFC) and Automatic Voltage Regulation (AVR), known as Automatic Generation Control (AGC), manages active and reactive power to ensure system stability. This study presents a novel hybrid controller with a (1+PDD²)-(1+TI) structure, optimized using the Mirage Search Optimization (MSO) algorithm. Designed for dual-area power systems, the controller enhances both LFC and AVR by coordinating voltage and frequency loops. MSO was chosen after outperforming five algorithms (ChOA, DOA, PSO, GTO, and GBO), achieving the lowest fitness value (ITSE = 0.028). The controller was tested under various challenging conditions: sudden load disturbances, stochastic variations, nonlinearities like Generation Rate Constraints (GRC) and Governor Dead Band (GDB), time-varying reference voltages, and ±20% to ±40% parameter deviations. Across all scenarios, the (1+PDD²)-(1+TI) controller consistently outperformed MSO-tuned TID, FOPID, FOPI-PIDD², (1+PD)-PID, and conventional PID controllers. It demonstrated superior performance in regulating frequency, tie-line power, and voltage, achieving approximately a 50% improvement in dynamic response. MATLAB/SIMULINK results confirm its effectiveness in enhancing overall system stability. Full article

This study investigates pre-seismic ionospheric anomalies preceding the 2023 Jishishan Ms6.2 earthquake using total electron content (TEC) data derived from BDS geostationary orbit (GEO) satellites. Multi-scale analysis integrating Butterworth filtering and wavelet transforms resolved TEC disturbances into three distinct frequency regimes: (1) high-frequency perturbations (0.56–3.33 mHz) showed localized disturbances (amplitude ≤ 4 TECU, range < 300 km), potentially associated with near-field acoustic waves from crustal stress adjustments; (2) mid-frequency signals (0.28–0.56 mHz) exhibited anisotropic propagation (>1200 km) with azimuth-dependent N-shaped waveforms, consistent with the characteristics of acoustic–gravity waves (AGWs); and (3) low-frequency components (0.18–0.28 mHz) demonstrated phase reversal and power-law amplitude attenuation, suggesting possible lithosphere–atmosphere–ionosphere (LAI) coupling oscillations. The stark contrast between near-field residuals and far-field weak fluctuations highlighted the dominance of large-scale atmospheric gravity waves over localized acoustic disturbances. Geometry-based velocity inversion revealed incoherent high-frequency dynamics (5–30 min) versus anisotropic mid/low-frequency traveling ionospheric disturbance (TID) propagation (30–90 min) at 175–270 m/s, aligning with theoretical AGW behavior. During concurrent G1-class geomagnetic storm activity, spatial attenuation gradients and velocity anisotropy appear primarily consistent with seismogenic sources, providing insights for precursor discrimination and contributing to understanding multi-scale coupling in seismo-ionospheric systems. Full article