Search Results (4,704)

To combat the growing issue of petroleum plastic waste, alternative bio-based polymers are being developed. Many of these biopolymers are made from bio-derived materials, or are biodegradable, but the most promising polymers fall in both categories. Polyhydroxyalkanoates (PHAs) are one such class of polymers, and poly-3-hydroxybutyrate (P3HB), the most popular PHA, has shown great potential. This study utilized two types of cotton-derived glucose, alongside commercial glucose, as a feedstock for the biosynthesis of P3HB by Cupriavidus necator (also known as Ralstonia eutropha). The fermentation took place in a 2-L bioreactor, showing potential for scale-up. A single-solvent extraction method was created and utilized to reduce process complexity and chemical consumption of the polymer extraction. Both cotton-derived glucoses were shown to produce more P3HB than commercial glucose. The resulting P3HB samples were compared to each other and to the literature based on polymer yield and thermal characteristics. While all samples averaged a smaller yield than seen in the literature (indicating the need for optimization of the bacterial growth and metabolism with a growth curve in our future work), the cotton-derived glucose was shown to yield more P3HB than commercial glucose. Further, cotton-derived P3HB had very similar thermal properties to the commercial glucose-derived P3HB (and to values from the literature) with onset of thermal degradation ranging from 185 °C to 263 °C, cold crystallization temperatures ranging from 24 °C to 28 °C, and melting temperatures ranging from 147 °C to 151 °C. Lastly, all samples were shown to have a similar percentage crystallinity, ranging from 38% to 45%, which is slightly lower than that reported in the literature. P3HB made from cotton-derived glucose was shown to have potential as a scalable, sustainable alternative process. Full article

Understanding adsorption and interfacial properties of surface-active agents at interfaces is crucial to the formation and stability of colloidal systems such as emulsions and foams. In this work, interfacial tension and viscoelasticity of saponin at the β-pinene/water interface were studied using drop tensiometry and dilational rheology measurement. For comparison, saponin at the air/water interface was also evaluated. Both saponin and β-pinene are bio-based, eco-friendly, and abundant in plants, trees, and agricultural wastes. Results showed that dynamic interfacial tensions σ(t) of saponin adsorbed at β-pinene/water and air/water interfaces could be well described by the Ward and Tordai model, suggesting that the saponin adsorption kinetics at both interfaces are controlled by a kinetically limited mechanism. The equilibrium interfacial pressure π_e data prior to critical micelle concentration (cmc) were adequately fitted by the Gibbs adsorption isotherm. At the β-pinene/water interface, a higher cmc and a larger area per molecule, but a lower π_e, were observed compared to the air/water interface. Interestingly, the dilational moduli of saponin at β-pinene/water increased with increasing oscillating frequency, but with less significant frequency dependence than their counterparts at the air/water interface. The dilational moduli of saponin at β-pinene/water passed through a minimum with increasing saponin bulk concentration, while the air/water interface exhibited a strikingly different trend in terms of concentration dependence and a higher magnitude for the dilational moduli. The correlation between adsorption behaviors and dilational properties of saponin at the two interfaces is discussed. Fundamental knowledge gained from this study will be beneficial for the rational development of new biocompatible emulsions and foam products for more sustainable applications. Full article

Microplastic pollution represents a significant environmental challenge, as microplastics accumulate in effluents and soils, causing serious risks to ecosystems and human health. Efficient removal of these contaminants is essential to mitigate their potential adverse effects. This review summarizes and critically analyses current methods for the removal of microplastics from effluents and soils, focusing on their effectiveness, advantages, and limitations. Conventional techniques—including filtration, flotation, chemical coagulation, flocculation, and adsorption—are discussed in the context of wastewater treatment and soil remediation. Emerging approaches, such as flocculation processes with special focus on the application of bio-based flocculants, are also highlighted as promising solutions. Key challenges in microplastic removal, including the diversity of microplastic types, their small size, and the complexity of environmental matrices, are addressed. This work intends to contribute to the urgent need for further research to develop more efficient and sustainable strategies for microplastic removal from environmental systems. Full article

Lignin is one of the most abundant natural biopolymers and plays a crucial role in the development of safe and sustainable alternatives for healthcare products. In this study, we employed molecular dynamics simulations and free energy calculations to investigate lignin derivatives’ interactions with skin-like membranes. Specifically, we designed a small lignin derivative composed of syringyl and guaiacyl subunits. Our results reveal that molecular size, concentration, and thermal conditions critically influence the insertion, interaction dynamics, and localization behavior of lignin derivatives. Notably, variations in these parameters induce distinct behaviors, including rapid membrane insertion, hydrogen bonding, clustering, and surface adhesion. The findings provide insights into the molecular mechanisms governing lignin derivatives’ interactions with skin-like membranes, with implications for developing bio-based skincare formulations and transdermal delivery systems. Our results highlight the importance of molecular size and concentration in optimizing lignin-derived compounds for dermatological and therapeutic applications. Full article

This study examined the impact of different bio-based and biodegradable mulching films (TSCs) and soil conditioners (SCs) on plant productivity and fruit quality in a tomato cultivation trial under non-irrigated conditions. In particular, different TSCs were developed based on xanthan gum (XG) or gelatine (GEL) mixed with wood fibres (WFs), while SCs were produced using XG and cellulose fibres. A total of 72 plants of Solanum lycopersicum var. cerasiforme were planted. The yield and number of fruits were measured at harvest, followed by physico-chemical analyses, while plant root systems were examined at the end of the experimental period. The results highlighted that the GEL-based TSCs improved the total fruit yield compared to the control (+50% on average). Furthermore, improved fruit yield was also observed for the XG-based SCs when applied in the soil with a higher organic content. Overall, no significant differences in fruit quality (i.e., Brix degree, carotenoids, lutein and potassium content) and plant root system parameters were found for all the treatments applied. At the end of the test, it was noticed that GEL-based films substantially retained their consistency due to their greater density and thickness, while XG-based films were more disintegrated, indicating higher biodegradation. Full article

This research presents the study of utilizing the cocoa husk biomass waste to obtain active carbon through carbonization method, followed by chemical–thermal activation. The activated carbon (CH) was characterized using BET, SEM–EDX, XPS, and Raman techniques. The obtained material showed a high specific surface area of 1661 m²·g⁻¹, and XPS confirmed the presence of oxygen-containing surface functionalities. The adsorption of reactive dye Drimaren Red K-7B by CH was studied to assess the impact of the initial concentration in water solution, temperature, and contact time. The adsorbent achieved over 90% removal within three minutes at 40 °C. The experimental data for the adsorption of Drimaren Red K-7B using CH showed a good fit with the Dubinin–Radushkevich isotherm and a pseudo-second-order kinetic model. This research offers a promising approach for advancing the circular economy through the obtaining of eco-friendly adsorbents derived from biomass waste, exhibiting high initial adsorption efficiency and rapid uptake kinetics towards reactive dye. Full article

Starch is a promising alternative to petroleum-based polymers due to its biodegradability and renewable nature. However, its widespread use in non-food applications raises ethical concerns. Mango kernels, a major byproduct of mango processing, represent an abundant yet underutilized starch source. However, conventional starch extraction requires costly purification steps with significant environmental impact. This study explores the development of extruded biocomposites, using corn starch and mango kernel flour (MKF) as a more sustainable alternative. The influence of lignin, extractives, amylose, and amylopectin content on the material properties was assessed. MKF was obtained by removing both tegument and endocarp from the mango kernels, grinding them in a colloidal mill, and finally drying the ground kernels. The resulting flour was blended with corn starch, processed in an internal mixer, and injection-molded. The composites were characterized through mechanical testing, water absorption analysis, colorimetry, and UV absorption assays. Notably, the composite containing ~20% MKF exhibited mechanical properties comparable to commercial polyethylene (PE-PB 208), with a tensile strength of 9.53 MPa and a Young’s modulus of 241.41 MPa. Additionally, MKF enhanced UVA protection. These findings suggest that mango kernel flour can partially replace starch in the production of injection-molded biopolymers, offering a more sustainable approach to biodegradable plastic development. Full article

In this work a multi-criteria analysis and an optimization tool were developed, which allows the substitution of fossil-based solvents with bio-based alternatives based on Hansen solubility parameters and various physical parameters, such as the boiling point, evaporation rate, viscosity or wetting behavior. The proof of concept was achieved by formulating two different paints used in coil coatings using the bio-based solvents, and they performed equally as well as their fossil-based counterparts. A potential decrease in CO₂ emissions was determined by a life cycle assessment and cradle-to-grave analysis of bio- and fossil-based solvents, which showed a large sustainability bonus when using solvents based on biomass. The introduced methodology provides initial insights into substituting currently used solvents systematically. Overall, implementing bio-based solvents is a viable drop-in method to decrease the environmental impact of paints and coatings, while maintaining the same performance. Full article

In the context of the urgent global transition toward sustainable materials, this study presents a comparative environmental life cycle assessment (LCA) of poly(3-hydroxybutyrate) (PHB), a biodegradable, bio-based polymer, against conventional petrochemical plastics (polystyrene—PS; polypropylene—PP) and another popular biopolymer, namely polylactic acid (PLA). The LCA was conducted using primary production data from a laboratory-scale PHB manufacturing process, integrating real-time energy consumption measurements across all production stages. Environmental indicators such as carbon footprint and energy demand were analyzed under cradle-to-gate and end-of-life scenarios. The results indicate that PHB, while offering biodegradability and renewable sourcing, currently exhibits a significantly higher carbon footprint than PP, PS, and PLA, primarily due to its energy-intensive downstream processing. However, the environmental impact of PHB can be markedly reduced—by over 67%—through partial integration of renewable energy. PLA demonstrated the lowest production-phase emissions, while PP showed the most favorable end-of-life outcomes under municipal waste management assumptions. The study highlights the critical influence of energy sourcing, production scale, and waste treatment infrastructure on the sustainability performance of biopolymers. These findings provide practical insights for industry and policymakers aiming to reduce the environmental burden of plastics and support a shift toward circular material systems. Full article

Almond hulls and shells, the byproducts of the almond industry, were analyzed to assess their potential valorization pathways. Shells showed a higher content in lignin and polysaccharides, but very low levels of extractives and inorganics. Hull’s high polar extractives fraction showed poor phenolic preponderance and antioxidant activity, but high sugar and mineral contents, and its lipophilic extracts were highly enriched in triterpenes (from 73.5% to 91.3%), while shells presented more fatty acids (27.4% to 34.2%) and sterols (17.4% to 29.1%). Shells exhibited much higher S/G ratio (syringyl to guaiacyl units) in their lignin polymer (1.0 to 1.4), compared to hulls (0.5 to 0.6). After mineral analyses, hulls showed high amounts of potassium (3.7–4.9%). Fixed carbon content was similar for both materials, but shells showed a higher energetic content, ~20 MJ/kg. Finally, both hulls and pellets increased the water holding capacity (WHC) of the soil by 50%, when added in weight percentages of 6.25% (hulls) and 25% (pellets). With these results, the range of possibilities for these waste materials is exciting: shells could be used to obtain hemicellulose oligosaccharides, while hulls could be used in sugar extraction for biotransformation or as a soil amendment. Full article

Biocomposites incorporating bio-based polymers and natural fibers hold great promise due to their environmental and economic benefits, though their commercial use is still limited by production challenges. This study reports the development of polylactic acid (PLA) composite filament reinforced with 5 wt% date palm fibers for fused deposition modeling (FDM)-based 3D Printing. The biocomposite is fabricated through extrusion and 3D Printing, and its mechanical, thermal, and water absorption properties are characterized in this work. Fiber dispersion is examined using a scanning electron microscope (SEM), while tensile testing evaluates yield strength, tensile strength, and elongation at break. Fracture behavior and failure mechanisms are further analyzed through optical microscopy and SEM. The biocomposite shows higher yield strength (36.75 MPa) and tensile strength (53.69 MPa), representing improvements of 10.12% and 6.53%, respectively, compared to in-house extruded pure PLA. However, it exhibits lower ductility, as indicated by reduced elongation at break. Water absorption is also higher in the biocomposite (0.58%) than in pure PLA (0.10%). Both materials display similar thermal behavior and brittle fracture characteristics. These results highlight the reinforcing effect of date palm fibers and the role of processing on the behavior/performance of the biocomposite. Reinforcing PLA with a small fraction of date palm fibers, an abundant natural resource, offers a cost-effective and eco-friendly material, particularly suited for single-use plastic products where biodegradability and sustainability are essential. This study also confirms the suitability of PLA/date palm fiber filament for FDM-based 3D Printing. Full article

The textile industry is among the most resource-intensive sectors, heavily dependent on water, energy, and synthetic chemicals, particularly in wet processing stages such as desizing, scouring, bleaching, dyeing, printing, and finishing. Conventional practices generate vast amounts of contaminated wastewater, posing severe risks to ecosystems and human health. In recent years, growing environmental concerns and stricter regulations have accelerated the search for sustainable alternatives. Biotechnology offers promising solutions, including enzymes, biopolymers, plant- and agrowaste-derived materials, and microbial metabolites, which can replace conventional auxiliaries and reduce the ecological footprint of textile processing. This review provides a structured overview of recent advances in bio-based compounds applied across different stages of textile wet processing. Applications are critically assessed in terms of performance, efficiency, environmental benefits, and potential for industrial adoption. Current limitations, future outlooks, and examples of commercially available products are also discussed. By highlighting the most recent progress, this review underscores the potential of bio-based innovations to support the transition toward more sustainable and resource-efficient textile manufacturing. Full article

Rejuvenating aged asphalt is critical for sustainable road construction and resource utilization. This paper systematically reviews the current research on rejuvenators, focusing on their classification and the micro-, and macro-properties of rejuvenated asphalt. Rejuvenators are categorized into mineral oil-based, bio-based, and compound types. Each type offers distinct advantages in recovering the performance of aged asphalt. Mineral oil-based rejuvenators primarily enhance low-temperature cracking resistance through physical dilution, while bio-based rejuvenators demonstrate superior environmental sustainability and stability. Compound rejuvenators, particularly those incorporating reactive compounds, show the best results in repairing degraded polymer modifiers and improving both low- and high-temperature properties of aged, modified asphalt. Atomic Force Microscopy (AFM), Fluorescence Microscopy (FM), and Scanning Electron Microscopy (SEM) have been applied to analyze the micro-properties of rejuvenated asphalt. These techniques have revealed that rejuvenators can restore the microstructure of aged asphalt by dispersing agglomerated asphaltenes and promoting molecular mobility. Functional groups and molecular weight changes, characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Gel Permeation Chromatography (GPC), indicate that rejuvenators effectively reduce oxidation products and molecular weight of aged asphalt, restoring its physicochemical properties. Macro-property evaluations show that rejuvenators significantly improve penetration, ductility, and fatigue resistance. Finally, this review identifies the key characteristics and challenges associated with rejuvenator applications and provides an outlook on future research directions. Full article

Plant-based residues generated within the agri-food system represent an abundant resource with significant potential for sustainable valorization. However, they are still underutilized and place a substantial burden on the environment and climate. This review discusses research trends over the past decade, combining bibliometric analysis with an overview of emerging technologies applied to the processing of residues generated from conventional crops and medicinal and aromatic plants. The bibliometric analysis reveals main valorization pathways, ranging from energy production to recovery of high-value bioactive compounds. Recent advances in this field are discussed in detail, with emphasis on low-energy and non-thermal processing (ultrasound, microwave, cold plasma), green solvents (natural deep eutectic solvents, bio-based solvents), biological pretreatments (with ligninolytic microorganisms and enzymes), thermochemical technologies (hydrothermal carbonization, pyrolysis), and emerging cascade strategies applied for multi-product recovery. Published research proves that these approaches have a great potential for sustainable valorization, while process optimization and economic feasibility remain a challenge at industrial scales for wider adoption. By providing an integrated perspective on diverse types of plant-based residues, this review highlights the importance of developing cascade and circular processing strategies, which align with global sustainability goals and encourage innovation in bio-based industries. New knowledge and advances in this field are highly required and will further help the transition of the current agri-food system towards greater circularity and sustainability. Full article