Search Results (188)

This work presents a proof of concept for a short-range high spectral resolution lidar (SR-HSRL) optimized for aerosol characterization in the first kilometer of the atmosphere. The system is based on a compact, high-repetition-rate diode-based fiber laser with a 300 MHz linewidth and 5 ns pulse duration, coupled with an iodine absorption cell. A central challenge in the instrument’s development was identifying a laser source that offered both sufficient spectral resolution for HSRL retrievals and nanosecond pulse durations for high spatiotemporal resolution, while also being compact, tunable, and cost-effective. To address this, we developed a methodology for complete spectral and temporal laser characterization. A two-day field campaign conducted in July 2024 in Tsukuba, Japan, validated the system’s performance. Despite the relatively broad laser linewidth, we successfully retrieved aerosol backscatter coefficient profiles from 50 to 1000 m, with a spatial resolution of 7.5 m and a temporal resolution of 6 s. The results demonstrate the feasibility of using SR-HSRL for detailed studies of aerosol layers, cloud interfaces, and aerosol–cloud interactions. Future developments will focus on extending the technique to ultra-short-range applications (<100 m) from ground-based and mobile platforms, to retrieve aerosol extinction coefficients and lidar ratios to improve the characterization of near-source aerosol properties and their radiative impacts. Full article

In 2024, Brazil experienced record-breaking wildfire activity, underscoring the escalating influence of climate change. This study examines the long-range transport of wildfire-generated aerosol plumes to São Paulo, combining multi-platform observations to trace their origin and properties. During August and September—a period marked by intense fire outbreaks in Pará and Mato Grosso do Sul—lidar measurements performed at São Paulo detected pronounced aerosol plumes. To investigate their source and characteristics, we integrated data from the Earth Cloud Aerosol and Radiation Explorer (EarthCARE) satellite, HYSPLIT back-trajectory modeling, and ground-based AERONET and Raman lidar measurements. Aerosol properties were derived from aerosol optical depth (AOD), Ångström exponent, and lidar ratio (LR) retrievals. Back-trajectory analysis identified three transport pathways originating from active fire zones, with coinciding AOD values (0.7–1.1) and elevated LR (60–100 sr), indicative of dense smoke plumes. Compositional analysis revealed a significant black carbon component, implicating wildfires near Corumbá (Mato Grosso do Sul) and São Félix do Xingu (Pará) as probable emission sources. These findings highlight the efficacy of satellite-based lidar systems, such as Atmospheric Lidar (ATLID) onboard EarthCARE, in atmospheric monitoring, particularly in data-sparse regions where ground instrumentation is limited. Full article

Aerosols play an important role in global meteorology and climate, as well as in air transport and human health, but there are still many unknowns on their effects and importance, in particular for the coarser (giant and ultragiant) aerosol particles. In this study, we aim to exploit the synergy between Raman lidar and Ka-band cloud radar to enlarge the size range in which aerosols can be observed and characterized. To this end, we developed an inversion technique that retrieves the aerosol microphysical properties based on cloud radar reflectivity and linear depolarization ratio. We applied this technique to a 6-year-long dataset, which was created using a recently developed methodology for the identification of giant aerosols in cloud radar measurements, with measurements from Potenza in Italy. Similarly, using collocated and concurrent lidar profiles, a dataset of aerosol microphysical properties using a widely used inversion technique complements the radar-retrieved dataset. Hence, we demonstrate that the combined use of lidar- and radar-derived aerosol properties enables the inclusion of particles with radii up to 12 µm, which is twice the size typically observed using atmospheric lidar alone. Full article

The Barcelona Raman LIDAR (BRL) will provide continuous monitoring of the aerosol extinction profile along the line of sight of the Cherenkov Telescope Array Observatory (CTAO). It will be located at its Northern site (CTAO-N) on the Observatorio del Roque de Los Muchachos. This article presents the performance of the pathfinder Barcelona Raman LIDAR (pBRL), a prototype instrument for the final BRL. Power budget simulations were carried out for the pBRL operating under various conditions, including clear nights, moon conditions, and dust intrusions. The LIDAR PreProcessing (LPP) software suite is presented, which includes several new statistical methods for background subtraction, signal gluing, ground layer and cloud detection and inversion, based on two elastic and one Raman lines. Preliminary test campaigns were conducted, first close to Barcelona and later at CTAO-N, albeit during moonlit nights only. The pBRL, under these non-optimal conditions, achieves maximum ranges up to about 35 km, range resolution of about 50 m for strongly absorbing dust layers, and 500 m for optically thin clouds with the Raman channel only, leading to similar resolutions for the LIDAR ratios and Ångström exponents. Given the reasonable agreement between the extinction coefficients obtained from the Raman and elastic lines independently, an accuracy of aerosol optical depth retrieval in the order of 0.05 can be assumed with the current setup. The results show that the pBRL can provide valuable scientific results on aerosol characteristics and structure, although not all performance requirements could be validated under the conditions found at the two test sites. Several moderate hardware improvements are planned for its final upgraded version, such as gated PMTs for the elastic channels and a reduced-power laser with a higher repetition rate, to ensure that the data acquisition system is not saturated and therefore not affected by residual ringing. Full article

The multi-band atmospheric correction algorithms, now referred to as remote sensing reflectance (R_rs) algorithms, have been implemented on a NASA computing facility for global remote sensing of ocean color and atmospheric aerosol parameters from data acquired with several satellite instruments, including the Visible Infrared Imaging Radiometer Suite (VIIRS) on board the Suomi spacecraft platform. These algorithms are based on the 2-band version of the SeaWiFS (Sea-Viewing Wide Field-of-View Sensor) algorithm. The bands centered near 0.75 and 0.865 μm are used for atmospheric corrections. In order to obtain high-quality R_rs values over Case 1 waters (deep clear ocean waters), strict masking criteria are implemented inside these algorithms to mask out thin clouds and very turbid water pixels. As a result, R_rs values are often not retrieved over bright Case 2 waters. Through our analysis of VIIRS data, we have found that spatial features of bright Case 2 waters are observed in VIIRS visible band images contaminated by thin cirrus clouds. In this article, we describe methods of combining cirrus and aerosol corrections to improve spatial coverage in R_rs retrievals over Case 2 waters. One method is to remove cirrus cloud effects using our previously developed operational VIIRS cirrus reflectance algorithm and then to perform atmospheric corrections with our updated version of the spectrum-matching algorithm, which uses shortwave IR (SWIR) bands above 1 μm for retrieving atmospheric aerosol parameters and extrapolates the aerosol parameters to the visible region to retrieve water-leaving reflectances of VIIRS visible bands. Another method is to remove the cirrus effect first and then make empirical atmospheric and sun glint corrections for water-leaving reflectance retrievals. The two methods produce comparable retrieved results, but the second method is about 20 times faster than the spectrum-matching method. We compare our retrieved results with those obtained from the NASA VIIRS R_rs algorithm. We will show that the assumption of zero water-leaving reflectance for the VIIRS band centered at 0.75 μm (M6) over Case 2 waters with the NASA R_rs algorithm can sometimes result in slight underestimates of water-leaving reflectances of visible bands over Case 2 waters, where the M6 band water-leaving reflectances are actually not equal to zero. We will also show conclusively that the assumption of thin cirrus clouds as ‘white’ aerosols during atmospheric correction processes results in overestimates of aerosol optical thicknesses and underestimates of aerosol Ångström coefficients. Full article

Biomass burning (BB) aerosols are the largest source of absorbing aerosols on Earth. Coupled with marine stratocumulus clouds (MSC), their radiative effects are enhanced and can cause cloud property changes (first indirect effect) or cloud burn-off and warm up the atmospheric column (semi-direct effect). Nevertheless, the derivation of their quantity and optical properties in the presence of MSC clouds is confounded by the uncertainties in the retrieval of the underlying cloud properties. Therefore, a robust methodology is needed for the coupled retrievals of absorbing aerosol above clouds. Here, we present a new retrieval approach implemented for a Spectro radiometric multi-angle polarimetric airborne platform, the research scanning polarimeter (RSP), during the ORACLES campaign over the Southeast Atlantic Ocean. Our approach transforms the 1D measurements over multiple angles and wavelengths into a 3D image-like input, which is then processed using various deep learning (DL) schemes to yield aerosol single scattering albedos (SSAs), aerosol optical depths (AODs), aerosol effective radii, and aerosol complex refractive indices, together with cloud optical depths (CODs), cloud effective radii and variances. We present a comparison between the different DL approaches, as well as their comparison to existing algorithms. We discover that the Vision Transformer (ViT) scheme, traditionally used by natural language models, is superior to the ResNet convolutional Neural-Network (CNN) approach. We show good validation statistics on synthetic and real airborne data and discuss paths forward for making this approach flexible and readily applicable over multiple platforms. Full article

Vertically retrieved optical properties by Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) were investigated in the case of three selected events over Athens and Thessaloniki with documented high pollen concentrations. Hirst-type volumetric samplers were used to detect and characterize the pollen during the CALIPSO overpasses. Only cases with a total pollen concentration greater than 400 grains m⁻³ for at least two hours per day were considered severe pollen events, while model simulations were used to exclude the presence of other depolarizing aerosol types. This study provides mean values of lidar-derived optical properties inside the detected pollen layers; i.e., optical values represent the atmosphere with the presence of pollen, in urban cities of Greece. Specifically, three observed aerosol layers, one over Athens and two over Thessaloniki with particulate color ratios of 0.652 ± 0.194, 0.638 ± 0.362, and 0.456 ± 0.284, and depolarization ratios of 8.70 ± 6.26%, 28.30 ± 14.16%, and 8.96 ± 6.87%, respectively, were misclassified by CALIPSO as marine-dusty marine, dust, and polluted dust. In cases of intense pollen presence, CALIPSO vertical profiles and aerobiological monitoring methods may be used synergistically to better characterize the atmospheric pollen layers. Full article

Ultraviolet (UV) radiation effects on Earth’s ecosystems on a global scale can be assessed on a basis of satellite estimates of hyperspectral irradiance on the surface and in ocean waters and the spectral biological weighting functions. The satellite UV surface irradiance algorithms combine satellite retrievals of extraterrestrial solar irradiance, cloud/surface reflectivity, aerosol optical depth, and total column ozone with radiative transfer computations. The assessment of in-water irradiance requires additional information on inherent optical properties (IOPs) of ocean water. Our Ozone Monitoring Instrument (OMI) surface hyperspectral irradiance algorithm is updated by implementing a new absorbing aerosol correction based on OMI daily retrievals of UV aerosol absorption optical depth (AAOD). To provide insight into the temporal and spatial variability of absorbing aerosols, we consider a monthly global AAOD climatology derived from the OMI UV aerosol algorithm. Hyperspectral underwater irradiance is computed using Hydrolight radiative transfer calculations along with a Case I water model of IOPs extended into UV. Both planar and scalar irradiances are computed on the Earth’s surface and propagated underwater. The output surface products include the UV index. The output underwater products include the hyperspectral diffuse attenuation coefficients of the planar and scalar irradiances. Effects of the seasonal variability of AAOD on the UV index and the deoxyribonucleic acid (DNA) damage dose rates are considered. The reduction in the UV index and DNA damage dose rate due to the presence of absorbing aerosols can be as large as 30–40%. Full article

Since its launch in 2018, the Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) mission has provided atmospheric products, including calibrated backscatter profiles and cloud and aerosol layer detection. While not the primary focus of the mission, these products garnered more interest after the end of Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP) data collection in 2023. In comparing the cloud and aerosol detection frequencies from CALIOP and ICESat-2, we find general agreement in the global patterns. The global cloud detection frequencies were similar in June, July, and August of 2019 (64.7% for ICESat-2 and 59.8% for CALIOP), as were the location and altitude of the tropical maximum; however, low daytime signal-to-noise ratios (SNRs) reduced ICESat-2’s detection frequencies compared to those of CALIOP. The ICESat-2 global aerosol detection frequencies were likewise lower. ICESat-2 generally retrieved a higher average global aerosol optical depth compared to the Moderate Resolution Imaging Spectroradiometer (MODIS) over the ocean, but the two were in closer agreement over regions with higher aerosol concentrations such as the Eastern Atlantic Ocean and the Northern Indian Ocean. The ICESat-2 and CALIOP orbital coincidences reveal highly correlated backscatter profiles as well as similar cloud and aerosol layer top altitudes. Future work with machine learning denoising techniques may allow for improved feature detection, especially during daytime. Full article

Smoke particles from biomass burning events are typically assumed to be spherical despite previous observations of non-spherical smoke. As such, large uncertainties exist in some physical and optical parameters used in lidar aerosol retrievals, including depolarization and lidar ratio of non-spherical smoke aerosols. In this analysis, using NASA’s Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) data during the biomass burning season over Africa from 2015 to 2017, we studied the frequency and distribution of non-spherical smoke particles to compare with findings of smoke particle non-sphericity from the Cloud-Aerosol Transport System (CATS) lidar. A supplemental smoke aerosol typing algorithm was developed to identify aerosol layers containing non-spherical smoke particles, which might otherwise be misclassified as desert dust, polluted dust, or dusty marine by the CALIOP standard aerosol typing algorithm. Then, the relationships between smoke particle sphericity, lidar ratio, and relative humidity are analyzed for CATS and CALIOP observations over Africa. Approximately 18% of smoke layers observed by CALIOP over Africa are non-spherical (depolarization ratio > 0.075) and agree with spatial distributions of non-spherical smoke found in CATS observations. A dependance of lidar ratio on relative humidity was found for layers of spherical smoke over Africa in both CATS and CALIOP data; however, no such dependance was evident for the depolarization ratio and layer relative humidity. While the supplemental smoke aerosol typing algorithm presented in this analysis was targeted only for specific biomass burning regions during biomass burning seasons and is not meant for global operational use, it presents one potential method for improved backscatter lidar aerosol typing. These results suggest that a dynamic lidar ratio, based on layer-relative humidity for spherical smoke, could be used to reduce uncertainties in smoke aerosol extinction retrievals for future backscatter lidars. Full article

Clouds and their shadows can be clearly identified from high-spatial-resolution satellite images, such as those provided by Landsat-8/9 with a spatial resolution of approximately 30 m and Sentinel-2 with a spatial resolution of around 20 m. Consequently, the difference between satellite measurements over cloud-shadowed and nearby illuminated pixels can be used to derive the aerosol optical depth (AOD), even in the absence of detailed surface optical properties. Based on this assumption, an algorithm for AOD retrieval over land is developed and tested using Landsat-8/9 images containing scattered clouds over Xuzhou, China, and Dalanzadgad, Mongolia. The retrieved AODs are compared against MODIS and ground-based sun photometer measurements. The findings reveal that, in cloudy regions, over 90% of the discrepancies between the AODs retrieved using the cloud-shadow method and ground-based measurements fall within 0.05 ± 0.20 AOD. This cloud-shadow algorithm represents a valuable complement to existing satellite aerosol retrieval methods, particularly in sparsely cloud-covered areas. Full article

We used WRF-Chem to simulate ash transport from eruptions of Chile’s Calbuco volcano on 22–23 April 2015. Massive ash and SO₂ ejections reached the upper troposphere, and particulates transported over South America were observed over Argentina, Uruguay, and Brazil via satellite and surface data. Numerical simulations with the coupled Weather Research and Forecasting–Chemistry (WRF-Chem) model from 22 to 27 April covered eruptions and particle propagation. Chemical and aerosol parameters utilized the GOCART (Goddard Chemistry Aerosol Radiation and Transport) model, while the meteorological conditions came from NCEP-FNL reanalysis. In WRF-Chem, we implemented a more efficient methodology to determine the Eruption Source Parameters (ESP). This permitted each simulation to consider a sequence of eruptions and a time varying ESP, such as the eruption height and mass and the SO₂ eruption rate. We used two simulations (GCTS1 and GCTS2) differing in the ash mass fraction in the finest bins (0–15.6 µm) by 2.4% and 16.5%, respectively, to assess model efficiency in representing plume intensity and propagation. Analysis of the active synoptic components revealed their impact on particle transport and the Andes’ role as a natural barrier. We evaluated and compared the simulated Aerosol Optical Depth (AOD) with VIIRS Deep Blue Level 3 data and SO₂ data from Ozone Mapper and Profiler Suite (OMPS) Limb Profiler (LP), both of which are sensors onboard the Suomi National Polar Partnership (NPP) spacecraft. The model successfully reproduced ash and SO₂ transport, effectively representing influencing synoptic systems. Both simulations showed similar propagation patterns, with GCTS1 yielding better results when compared with AOD retrievals. These results indicate the necessity of specifying lower mass fraction in the finest bins. Comparison with VIIRS Brightness Temperature Difference data confirmed the model’s efficiency in representing particle transport. Overestimation of SO₂ may stem from emission inputs. This study demonstrates the feasibility of our implementation of the WRF-Chem model to reproduce ash and SO₂ patterns after a multi-eruption event. This enables further studies into aerosol–radiation and aerosol–cloud interactions and atmospheric behavior following volcanic eruptions. Full article

Aerosol optical depth (AOD) serves as a significant parameter in aerosol research. With the increasing utilization of satellite data in AOD research, it is crucial to evaluate the satellite AOD data. Using Aerosol Robotic Network (AERONET) in situ measurements, this study investigates the accuracy and applicability of Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) AOD data in Asia from June 2006 to June 2023. By matching the CALIPSO AOD data in a 1° × 1° area around the selected AERONET sites, various statistical metrics were used to create a comprehensive evaluation system. The results show that: (1) There is a high correlation between the AODs of CALIPSO and AERONET (R = 0.636), and the AOD values of CALIPSO are only 1.7% higher than those of AERONET on average. The MAE (0.215) and RMSE (0.358) suggest that the error level of CALIPSO AOD is relatively low; (2) In most of the 25 sites throughout Asia CALIPSO AOD have high matching accuracies with the AERONET AOD, and only in three sites has a validation accuracy of ‘Poor’; (3) The accuracy varies across the four seasons, ranked as follows: winter demonstrates the highest accuracy, followed by autumn, spring, and summer; (4) The accuracy varies with surface elevation, with better matching in lowest altitude (<50 m) and high altitude (>500 m) areas, but slightly worse matching in medium altitude (200–500 m) areas and low altitude (50–200 m). The uncertainty in the CALIPSO AOD retrievals varies in seasons, altitudes, and aerosol characteristics. Full article

The Planetary Boundary Layer Height (PBLH) significantly impacts weather, climate, and air quality. Understanding the global diurnal variation of the PBLH is particularly challenging due to the necessity of extensive observations and suitable retrieval algorithms that can adapt to diverse thermodynamic and dynamic conditions. This study utilized data from the Cloud-Aerosol Transport System (CATS) to analyze the diurnal variation of PBLH in both continental and marine regions. By leveraging CATS data and a modified version of the Different Thermo-Dynamics Stability (DTDS) algorithm, along with machine learning denoising, the study determined the diurnal variation of the PBLH in continental mid-latitude and marine regions. The CATS DTDS-PBLH closely matches ground-based lidar and radiosonde measurements at the continental sites, with correlation coefficients above 0.6 and well-aligned diurnal variability, although slightly overestimated at nighttime. In contrast, PBLH at the marine site was consistently overestimated due to the viewing geometry of CATS and complex cloud structures. The study emphasizes the importance of integrating meteorological data with lidar signals for accurate and robust PBLH estimations, which are essential for effective boundary layer assessment from satellite observations. Full article

Clouds are crucial in regulating the Earth’s energy budget. Global cloud top heights have been easily retrieved from satellite measurements, but there are few methods for determining cloud base height (CBH) from satellite measurements. The Cloud Base Altitude Spatial Extrapolator (CBASE) algorithm was proposed to derive the height of the lower-troposphere liquid cloud base by using the Cloud-Aerosol Lidar with Orthogonal polarization cloud aerosol LiDAR (CALIOP) profiles and weather observations at airports from aviation routine and special weather report (METARs and SPECIs, called METAR) observation data in the United States. A modification to the CBASE algorithm over China (CNMETAR-CBASE) is presented in this paper. In this paper, the ability of the CBASE algorithm to calculate CBH in China is evaluated, and METAR observations over China (CNMETAR) were then used to modify the CBASE algorithm. The results including CNMETAR observation data in China can better retrieve CBH over China compared with the results using the original CBASE algorithm, and the accuracy of the global CBH results has been improved. Overestimations of CBH with the original algorithm range from 500 to 800 m in China, which have been reduced to about 300 m with an improved algorithm. The deviations calculated by the algorithm also have a significant reduction, from 480 m (CBASE) to 420 m (CNMETAR-CBASE). In conclusion, the modified CBASE algorithm not only calculates the CBH more accurately in China but also improves the results of the global CBH retrieved from satellites. Full article