Search Results (139)

This study demonstrates how synthesis conditions and bacterial cellulose (BC) functionalization influence the physicochemical properties and antibacterial performance of BC membranes containing green-synthesized silver nanoparticles (AgNPs). Mint and avocado-seed extracts enabled AgNP formation in aqueous media but differed in composition. UV–Vis screening across pH and temperature revealed inefficient synthesis at acidic pH, whereas higher temperatures produced broader localized surface plasmon resonance (LSPR) bands. Neutral conditions generated the most intense and narrow LSPR signals. Under optimized conditions (pH 7, 23 °C), AgNPs were confirmed by TEM, and their colloidal properties differed between extracts: mint-derived particles exhibited smaller hydrodynamic diameters and lower polydispersity than avocado-derived AgNPs. Two BC functionalization strategies were evaluated: immersion in pre-formed AgNP dispersions and in situ synthesis within the BC matrix. In situ membranes displayed stronger and better-defined LSPR peaks. Agitation released nanoparticles from all BC-AgNP membranes, with smaller species released from in situ systems. Antibacterial assays against E. coli showed greater bactericidal activity for in situ membranes. Avocado-derived in situ BC-AgNPs produced larger inhibition halos and prevented bacterial regrowth in liquid culture. Overall, in situ green synthesis within BC provides an effective route to robust and sustainable antibacterial BC membranes. Full article

Cyclocarya paliurus polysaccharides (CPP) possess various physiological functions such as lipid-lowering and antioxidant activities. However, as a complex plant-based dispersion system, the interfacial characteristics of fermented C. paliurus beverages often restrict the release of bioefficacy of the active ingredients. This study investigated the impact of particle size on the colloidal stability and lipid-lowering activity of C. paliurus beverages fermented by Lactobacillus plantarum and established an empirical correlation between the two. While the 200–300 mesh fraction showed superior physical stability, the 40–60 mesh fraction was identified as the optimal formulation in this study when balancing ROS indicators. In vivo assays using Caenorhabditis elegans demonstrated that the 40–60 mesh formulation significantly reduced MDA levels and inhibited lipid accumulation, decreasing TG content by 19–46%. Notably, the average diameter of lipid droplets decreased by 38.4%, promoting the conversion of large storage-type droplets to small/medium-sized droplets with high metabolic activity. This study reveals the trade-off between physical dispersibility and bioavailability, providing a theoretical basis for optimizing the interfacial structure of functional plant-based beverages. Full article

This study investigated the biosynthesis of magnetite nanoparticles mediated by chia mucilage (CM-Fe₃O₄ NPs) and their application in the co-encapsulation of Lactobacillus rhamnosus GG (LGG) using spray drying. CM-Fe₃O₄ NPs were synthesized by combining CM extract with iron salts, in which hydroxyl and carbonyl groups of CM acted as natural ligands for Fe²⁺/Fe³⁺ ions. A response surface design was applied to optimize synthesis parameters, focusing on size distribution and zeta potential, and confirming the influence of pH on colloidal stability. Characterization by FE-SEM, DLS, XRD, UV-Vis, and FTIR revealed spherical particles with an inorganic core (50–300 nm) and a hydrated organic coating (600–900 nm), consistent with a spinel structure functionalized by CM. Spray-drying encapsulation tests showed that incorporating CM-Fe₃O₄ NPs did not compromise bacterial viability, maintaining optimal moisture content and survival. Growth curves and confocal microscopy corroborated the physiological compatibility of the nanoparticles, with no alterations in LGG morphology or growth dynamics. Under simulated gastrointestinal conditions, co-encapsulated microcapsules exhibited slightly improved survival in the gastric phase and significantly greater viability in the initial intestinal phase. These results suggest that CM-Fe₃O₄ NPs modulate matrix degradation and promote controlled release, ensuring therapeutic concentrations of LGG in the intestine. Overall, the CM-Fe₃O₄ nanocomposite system integrates the protective properties of biopolymers with the functional advantages of iron nanoparticles, offering dual functionality: probiotic stabilization and potential iron supplementation. This innovative, food-grade approach supports the development of next-generation functional foods with combined therapeutic and nutritional benefits. Full article

Calcium peroxide nanoparticles (CaO₂ NPs) have recently attracted increasing attention as oxygen-generating nanomaterials with potential biomedical applications. Their ability to release molecular oxygen and reactive oxygen species (ROS) in aqueous environments enables modulation of hypoxic and oxidative microenvironments, which play critical roles in infection control, tumor progression, and tissue regeneration. Despite growing interest in oxygen-releasing biomaterials, the literature specifically addressing CaO₂ nanomaterials remains comparatively limited and fragmented, particularly when compared with the extensive body of work on calcium oxide-based systems. This review provides a comprehensive overview of CaO₂ nanoparticles, focusing on synthesis strategies, physicochemical properties, and emerging biomedical applications. Conventional bottom-up synthesis routes based on calcium salts, calcium hydroxide, and calcium oxide are critically compared, highlighting the influence of reaction parameters and stabilizing agents on particle size, morphology, crystallinity, and colloidal stability. Surface modification strategies, including polyethylene glycol, polyvinylpyrrolidone, and hyaluronic acid, are also discussed for their role in improving nanoparticle stability, regulating decomposition kinetics, and enhancing biocompatibility. The mechanisms governing oxygen and ROS generation are analysed in relation to antibacterial activity, hypoxia alleviation in tumor microenvironments, and oxygen-supplying biomaterials for tissue engineering and wound healing. In addition, key challenges associated with oxidative stress responses are discussed. Finally, the review outlines current limitations and perspectives regarding the clinical translation of CaO₂-based nanotherapeutic systems. Overall, this work aims to consolidate the currently dispersed knowledge on CaO₂ nanoparticles and provide a critical framework to guide future research in oxygen-releasing nanomedicine. Full article

The microencapsulation of plant bioactive compounds by spray drying enhances their stability and controlled delivery in food systems. In this study, flaxseed hydrocolloid (Linum usitatissimum L.) was evaluated as a natural wall material for encapsulating phenolic extracts from mashua (Tropaeolum tuberosum Ruiz & Pav.) and oca (Oxalis tuberosa Molina). Microcapsules were produced using hydrocolloid concentrations of 2.5–10%. The resulting particles showed low moisture content (3.79–5.42%), low water activity (0.31–0.39), and high solubility (90.94–96.45%). Encapsulation efficiency ranged from 78.67 to 62.32% for mashua and from 71.94 to 40.45% for oca, decreasing with increasing wall material concentration. Phenolic content ranged from 14.48 to 11.47 mg GAE/g (mashua) and 8.52 to 4.82 mg GAE/g (oca), with antioxidant capacity between 293.19–143.77 and 84.49–10.33 µmol TE/g, respectively. Particle size ranged from 4.02–10.50 µm (mashua) and 3.93–4.82 µm (oca), and zeta potential values (−37.86 to −27.55 mV) indicated good colloidal stability. Release kinetics showed a biphasic profile and were predominantly diffusion-controlled. The Higuchi model showed significant diffusion (p < 0.05), while the Korsmeyer–Peppas analysis indicated mainly Fickian diffusion (n = 0.234–0.426) with anomalous transport at higher mashua concentrations. These results demonstrate that flaxseed hydrocolloid is an effective and sustainable wall material for controlled release of phenolic compounds from Andean tubers. Full article

Background/Objectives: Dementia remains one of the major global health challenges of the modern era. Researchers worldwide continue to seek effective therapeutic strategies to combat this neurodegenerative condition. Silymarin is a natural compound with strong neuroprotective and antioxidant properties that holds great potential for dementia management; however, its poor aqueous solubility and limited ability to cross the blood–brain barrier (BBB) have restricted its clinical application. This study focused on the formulation and evaluation of a heparin–pullulan silymarin liposomal (HPSL) nano-gel to enhance the neuroprotective efficacy of silymarin, with potential for improved brain targeting effects. Methods: The HPSL nano-gel was synthesized using the thin-film hydration technique and optimized based on entrapment efficiency, particle size distribution, zeta potential, and in vitro release kinetics. The neuroprotective efficacy of the HPSL nano-gel was evaluated in mice using behavioral evaluations, biochemical quantification of oxidative stress markers, evaluation of cholinergic enzyme activity and detailed histopathological examination of brain tissues. Results: Morphological characterization using scanning electron microscopy (SEM) confirmed a uniform nano-scale structure. The optimized formulation (HPSL-3) exhibited a particle size of 406.07 ± 19.33 nm, zeta potential of −23.72 ± 7.64 mV and an entrapment efficiency of 73.53 ± 12.05%, indicating good colloidal stability and efficient drug loading. The in vitro release profile followed non-Fickian diffusion kinetics, suggesting sustained drug release behavior. Behavioral studies in scopolamine-induced amnesic mice (elevated plus maze, hole board, and light/dark paradigms) demonstrated significant (p ≤ 0.001) improvements in learning and memory retention. Biochemical analyses showed increased levels of ChAT, SOD, CAT, and GSH, along with decreased AChE and MDA levels, supporting the neuroprotective potential of the formulation. Histopathological evaluation revealed marked attenuation of neuronal degeneration, inflammation, and edema (HAI = 4) compared to the scopolamine-treated group (HAI = 11). Conclusions: Overall, the HPSL-2 formulation effectively enhanced silymarin delivery across the BBB, demonstrating potent antioxidant, neuroprotective, and cholinergic modulatory effects. These findings suggest that HPSL-2 represents a promising nano-carrier system for the management of dementia and other oxidative-stress-related neurological disorders. Full article

This review examines biodegradable polymer-based core–shell nanoformulations encapsulating essential oils for acne treatment through the lens of physicochemical design and controlled delivery mechanisms. Acne is a common inflammatory skin disorder closely associated with sebum overproduction and microbial imbalance, while conventional therapies, although effective, may present long-term side effects. Increasing attention has therefore turned to sustainable dermatological materials derived from eco-friendly polymers combined with naturally active compounds. Recent advances show that core–shell nanostructures fabricated from biodegradable polymers function as physicochemically engineered carriers for volatile essential oils. They enhance their stability and protect them from premature degradation. They also enable controlled release governed by diffusion, polymer relaxation, interfacial interactions, and degradation kinetics. This review highlights how polymer chemistry, interfacial properties, particle morphology, and processing routes determine encapsulation efficiency, release profiles, and skin permeation behaviour. Particular emphasis is placed on structure–property–function relationships, including mass transport phenomena, thermodynamic compatibility between polymers and essential oils, surface charge, wettability, and nanostructure architecture, which collectively influence bioavailability and therapeutic performance. By integrating concepts from polymer physical chemistry, colloid and interface science, and drug delivery kinetics, these sustainable nanoformulations emerge as promising platforms for acne and sebum control. Overall, essential oil-loaded biodegradable polymeric core–shell systems represent a sustainable and scientifically grounded approach to acne management, although further physicochemical characterization, in vivo validation, and consideration of cost, technical challenges, and current limitations are required to support clinical translation. Full article

In the fabrication of ultrathin multilayer ceramic capacitors (MLCCs), the long-term stability of ceramic slurries is a critical yet often overlooked factor that can significantly influence coating uniformity, interfacial adhesion, and process reproducibility. Despite its industrial importance, the time-dependent evolution of slurry dispersion structures during storage and its direct impact on green sheet properties remain insufficiently understood. This study examined the time-dependent physicochemical evolution of barium titanate (BaTiO₃)-based green sheet slurries, which behave as colloidal gel-like dispersion systems, and their influence on the structural, optical, and interfacial properties of the resulting sheets. Dynamic light scattering revealed progressive yet uniform particle aggregation, while viscosity measurements indicated a gradual ~10% decrease over 960 h, reflecting reduced dispersion stability and progressive weakening of the slurry gel network during extended storage. The slurry, consisting of BaTiO₃ particles, polymeric binders, and plasticizers, forms a three-dimensional transient gel network, in which particle–particle and particle–binder interactions govern rheological behavior. The observed viscosity decrease and turbidity reduction indicate gel network relaxation and partial gel–sol–like transition behavior driven by aggregation. Cross-sectional scanning electron microscopy demonstrated that these changes produced a measurable reduction in final green sheet thickness, despite identical processing conditions. Furthermore, peel tests revealed that interfacial adhesion strength increased with storage time, attributable to localized solid enrichment within the slurry gel matrix and enhanced bonding at the release film interface. The reduced coating thickness also contributed to lower optical haze, reflecting a shortened light-transmission path. Collectively, these findings demonstrate that even moderate aggregation in a ceramic network-forming dispersion system substantially alters coating behavior, adhesion, and optical performance. The results underscore the importance of managing gel-network stability and rheology to ensure reliable green sheet fabrication and storage in MLCC manufacturing. Full article

The development of effective inhalable drugs remains a key challenge in the treatment of pulmonary diseases, due to the physiological barriers of the respiratory tract and the lack of predictive models that accurately reproduce the human lung environment. In this context, liposomes (LP) have emerged as promising nanocarriers for pulmonary drug delivery due to their high biocompatibility, surfactant-like composition, capacity to encapsulate both hydrophilic and lipophilic drugs, and potential to provide sustained drug release while reducing systemic toxicity. This study evaluates the influence of size and PEGylation on their physicochemical properties, cytotoxicity, interaction with the pulmonary mucus, and cellular internalisation. LP of 100 nm (LP 100), 200 nm (LP 200), and 600 nm (LP 600) were characterised physiochemically and evaluated in pulmonary cell lines (A549 and Calu-3) exposed in liquid–liquid interface (LLI) and air–liquid interface (ALI) by nebulisation. In addition, artificial pulmonary mucus (APM) was employed to analyse LP penetration through the pulmonary mucus barrier. Results indicate that LP 100 exhibits greater colloidal stability, lower cytotoxicity, and sustained migration through the APM over time with respect to larger particles. PEGylation of LP 100 (LP-PEG) further increases their stability and ability to penetrate the APM, although cellular internalisation is reduced due to the steric effect of the PEG coating. These findings highlight the importance of adjusting the size and surface modifications of LPs according to the therapeutic target of the drug, optimising their persistence on the epithelial surface or their cellular uptake. Full article

Polymer-based drug delivery systems offer robust opportunities to improve chemotherapy performance while mitigating systemic toxicity, a critical challenge in leukemia treatment. In this study, poly(ε-caprolactone) (PCL) microparticles were developed as carriers for the co-delivery of cytarabine (ARA-C), a frontline antileukemic agent, and a pecan-derived polyphenolic extract (PRE) as a complementary bioactive component. Microparticles were prepared by a double emulsion solvent evaporation method and formulated with varying drug and extract loadings. The systems were characterized in terms of morphology, particle size, colloidal properties, encapsulation efficiency, and chemical composition using optical microscopy, scanning electron microscopy, dynamic light scattering, zeta potential analysis, UV–Vis spectroscopy, Folin–Ciocalteu assay, and FTIR spectroscopy. In vitro release studies revealed sustained and formulation-dependent release profiles for both ARA-C and PRE, which were successfully fitted to kinetic models, indicating diffusion- and matrix-controlled release mechanisms. Additionally, preliminary cell viability assays using fibroblasts supported the cytocompatibility of the formulations. The results support the use of PCL-based microparticles as reproducible polymeric systems for the co-encapsulation and controlled release of cytarabine and polyphenol-rich extracts, contributing to the development of combination delivery approaches relevant to leukemia treatment. Full article

High-energy methods dominate the development of lipid nanoparticles but often require specialized equipment that increases production costs. Low-energy approaches, particularly those free of organic solvents, offer a promising alternative. This study aimed to obtain nanostructured lipid carriers (NLCs) using a solvent-free, low-energy process combining microemulsification and phase inversion. Cetearyl alcohol and PEG-40 hydrogenated castor oil were selected as the solid lipid and surfactant, respectively; the formulation and process were optimized through a Box–Behnken Design. Incorporation of the ionic surfactant extended colloidal stability, while the poloxamer in the aqueous phase enhanced steric stabilization. Resveratrol was efficiently encapsulated (E.E. = 98%), contributing to reduced particle size (291 nm), improved homogeneity (PDI = 0.25), and positive surface charge (+43 mV). Scale-up yielded stable particles carrying resveratrol with a mean size of 507 nm, PDI = 0.24, and ZP = +52 mV. The optimized formulation remained stable for 90 days at 8 °C. In vitro release demonstrated a sustained and controlled release profile, with significantly lower resveratrol release compared to the free compound. Thermal analysis confirmed drug incorporation within the lipid matrix, while transmission electron microscopy (TEM) revealed spherical particles (~200 nm) and SAXS indicated a nanostructure of ~50 nm. Overall, this study demonstrates that solvent-free, low-energy processing can produce stable and scalable NLC formulations, successfully encapsulating resveratrol with favorable physicochemical properties and controlled release behavior. These findings highlight a simple, cost-effective strategy for developing lipid-based nanocarriers with potential applications in drug delivery. Full article

Introduction: Magnetic nanoparticles are widely investigated as multifunctional platforms for drug delivery and theranostic applications, yet their biomedical implementation is hindered by aggregation, limited colloidal stability, and insufficient biocompatibility. Hybrid biopolymer coatings can mitigate these issues while supporting drug incorporation. Aim: This study aimed to develop casein–pullulan-coated Fe₃O₄ nanocomposites loaded with xanthohumol, enhancing stability and enabling controlled release for potential theranostic use. Methods: Fe₃O₄ nanoparticles were synthesized through co-precipitation and incorporated into a casein–pullulan matrix formed via polymer complexation and glutaraldehyde crosslinking. A 3² full factorial design evaluated the influence of casein:pullulan ratio and crosslinker concentration on physicochemical performance. Nanocomposites were characterized for size, zeta potential, morphology, composition, and stability, while drug loading, encapsulation efficiency, and release profiles were determined spectrophotometrically. Molecular docking was performed to examine casein–pullulan interactions. Results: Uncoated Fe₃O₄ nanoparticles aggregated extensively, displaying mean sizes of ~292 nm, zeta potential of +80.95 mV and high polydispersity (PDI above 0.2). Incorporation into the biopolymer matrix improved colloidal stability, yielding particles of ~185 nm with zeta potentials near –35 mV. TEM and SEM confirmed spherical morphology and uniform magnetic core incorporation. The optimal formulation, consisting of a 1:1 casein:pullulan ratio with 1% glutaraldehyde, achieved 5.7% drug loading, 68% encapsulation efficiency, and sustained release of xanthohumol up to 84% over 120 h, fitting Fickian diffusion (Korsmeyer–Peppas R² = 0.9877, n = 0.43). Conclusions: Casein–pullulan hybrid coatings significantly enhance Fe₃O₄ nanoparticle stability and enable controlled release of xanthohumol, presenting a promising platform for future targeted drug delivery and theranostic applications. Full article

Artocarpin, a flavonoid derived from Artocarpus altilis, has been reported to exhibit anti-inflammatory and geroprotective activities. In this study, artocarpin was isolated from A. altilis heartwood via maceration followed by chromatographic purification, yielding 0.435% of dried extract with a purity of approximately 81%, as confirmed by HPLC. To enhance the physicochemical stability and biological performance of artocarpin, a chitosan-based microparticle delivery system was developed using 0.1% chitosan cross-linked with 0.5% sodium tripolyphosphate (5:1 ratio). The optimized formulation achieved an encapsulation efficiency of 0.5 µg of artocarpin per mg of particles (loading content 0.05% w/w). Physicochemical analysis revealed that the particles possessed a predominantly spherical morphology with sizes ranging from 1 to 4 µm. The hydrodynamic diameter measured by DLS was approximately 3.3 µm, with a PDI of 0.79 ± 0.18 and a zeta potential of 12.8 mV, indicating acceptable dispersity and colloidal stability for a chitosan-based microparticle system. FTIR and XRD analyses verified successful incorporation of artocarpin into the chitosan matrix. In vitro release studies showed a biphasic pattern with an initial burst within 1–12 h followed by sustained release, reaching approximately 60% cumulative release. The anti-inflammatory activity of the formulations was evident through a dose-dependent reduction in nitric oxide production in LPS-stimulated RAW 264.7 macrophages. The artocarpin-loaded particles (CSPs/AE) suppressed NO levels by 34.33 to 73.19%, with statistically significant decreases at p < 0.05. These results highlight the potential of artocarpin-loaded chitosan microparticles as an effective anti-inflammatory delivery system with promising applicability for osteoarthritis management. Full article

Background: Breast cancer remains one of the most prevalent and lethal malignancies worldwide. Although doxorubicin (DOX) is widely used as a first-line chemotherapeutic agent, its clinical utility is constrained by dose-limiting cardiotoxicity and systemic adverse effects. Nanoparticulate drug delivery systems have therefore attracted attention for improving DOX stability, biocompatibility, and tumor selectivity. In this study, we explored sterosomes—simple non-phospholipid nanocarriers composed of cholesterol and palmitic acid—as an alternative DOX delivery platform with pH-responsive properties. Methods: DOX-loaded sterosomes (DOX-STs) were prepared using cholesterol and palmitic acid to impart acid-sensitive behavior. The nanocarriers were systematically evaluated through particle characterization, physicochemical stability assessment, in vitro pH-dependent drug release, and cellular uptake studies. Furthermore, therapeutic efficacy and systemic safety were investigated in an MDA-MB-231 breast cancer xenograft mouse model. Results: DOX-STs exhibited particle sizes below 100 nm, high encapsulation efficiency, and excellent colloidal stability for 28 days. The sterosomes demonstrated accelerated DOX release under acidic conditions relative to physiological pH, consistent with their pH-responsive design. Enhanced cellular uptake was observed in both MCF-7 and MDA-MB-231 cells. In vivo, DOX-ST treatment resulted in significant tumor growth suppression and prolonged survival without notable body weight loss, indicating reduced systemic toxicity compared to free DOX. Conclusions: This study presents a simple sterosome-based nanocarrier system that achieves pH-responsive DOX release and enhanced antitumor efficacy while minimizing toxicity. These findings highlight the potential of sterosomes as a translatable nanomedicine platform for breast cancer therapy. Full article

The rapid development of nanomedicine is driving extensive research and the synthesis of new nanomaterials. Biocompatible nanoparticles have the potential to serve as both imaging agents for medical diagnostics and carriers for targeted therapy. Among the various nanocomplexes investigated for cancer theranostics, gold nanoparticles stabilized by polyamidoamine (PAMAM) dendrimers have proven to be a promising platform. The unique physicochemical properties of gold nanoparticles, when combined with the branched architecture of PAMAM dendrimers, enhance stability, biocompatibility, and functionalization capability, enabling precise tumour targeting, improved imaging contrast, and controlled drug release. In this paper, we demonstrate the synthesis of gold nanoparticles stabilized by 2nd generation PAMAM dendrimers using three different methods: sonication, microwave, and unassisted techniques. The described synthesis approaches provide a rapid and straightforward method to achieve monodisperse particle size distribution and high colloidal stability up to 3 months. Physicochemical characterization of the nanocomplexes was carried out using ultraviolet-visible light spectroscopy, dynamic light scattering with zeta potential analysis, infrared spectroscopy, and atomic force microscopy. Furthermore, the effects of selected concentrations of PAMAM:HAuCl₄ nanoparticles for all types of synthesis on human breast adenocarcinoma and human osteosarcoma cell lines were investigated using cytotoxicity assays. The results of the conducted tests show cytotoxicity values at a similar level. However, the sample synthesized using the sonication technique exhibited the lowest toxicity. Full article