Search Results (229)

The efficient purification of Pb(II)-containing wastewater is essential for safeguarding public health and maintaining the aquatic environment. In this study, novel hydrous ferric oxide (HFO) nanoparticle-embedded poly(vinylidene fluoride) (PVDF) composite adsorption membranes were developed through a simple blending method for efficient Pb(II) removal. This composite membrane (denoted as HFO-PVDF) combines the excellent selectivity of HFO nanoparticles for Pb(II) with the membrane’s advantage of easy scalability. The optimized HFO-PVDF_(1.5) membrane achieved adsorption equilibrium within 20 h and exhibited excellent adsorption capacity. Moreover, adsorption capacity markedly enhanced with increasing temperature, confirming the endothermic nature of the process. The developed HFO-PVDF membranes demonstrate significant potential for real-world wastewater treatment applications, exhibiting exceptional selectivity for Pb(II) in complex ionic matrices and could be effectively regenerated via a relatively straightforward process. Furthermore, filtration and dynamic regeneration tests demonstrated that at an initial Pb(II) concentration of 5 mg/L, the membrane operated continuously for 10–13 h before regeneration, treating up to 200 L/m² of wastewater before breakthrough, highlighting potential for cost-effective industrial wastewater treatment. This study not only demonstrates the high efficiency of the HFO-PVDF membrane for heavy metal ion removal but also provides a theoretical foundation and technical support for its practical application in water treatment. Full article

It was demonstrated that various defects can be induced in halide crystals by irradiation with swift heavy ions. Here, we irradiated barium fluoride (BaF₂) single crystals with 220 MeV xenon ions at room temperature and performed stepwise thermal annealing up to the temperature of 825 K to study the kinetics of ion-induced defects at different temperatures. Optical spectroscopy was utilized for the measurement of the wide range of absorption spectra from NIR to VUV. A sharp decrease in the F₂ absorption peak was observed for the samples annealed in the temperature range of 400–450 K. This result can be explained by their recombination with anion interstitials during thermal decay of the complex hole centers. The mobile interstitials, those did not recombine with the F₂ centers, increase the absorption peaks in the 9–10 eV region, which can be associated with interstitial aggregates. Full article

The selectivity of the colorimetric method for Co(II) determination using the nitroso-R-salt (NRS) in samples with complex matrices has been improved. Interferences caused by Cu(II), Fe(II), Fe(III), Mn(II), Al(III) and Ni(II) ions, which were present in the bioleach ate of lithium-ion batteries, have been solved through the sequential addition of masking agents: acetate, fluoride, ethylenediaminetetraacetic acid (EDTA), and strong acids (H₂SO₄). The absorbance of the NRS-Co(II) complex was typically measured at 525 nm, but it was also studied at 550 nm due to minimal interferences observed at 550 nm. The sequence of the masking agent’s addition showed a significant influence on the interference effect. The optimal sequence was sample, acetate–acetic acid buffer solution with dissolved fluoride, NRS, EDTA and H₂SO₄. The proposed method demonstrated robust performance at 550 nm, with a relative standard deviation (RSD) around 2%, and good accuracy (RV% around 100%). The limit of detection (LoD) was 0.1 mg L⁻¹ and the limit of quantification (LoQ) was 0.3 mg L⁻¹. The linear range extended up to 15 mg L⁻¹ (R² = 0.998). Real samples analyzed using the optimized method showed no significant differences when compared to results from atomic absorption spectroscopy, confirming its reliability. Full article

This study explores the enhancement of fluoride adsorption using biochar derived from the brown macroalga Sargassum polycystum, which was treated with iron oxide (Fe₃O₄). The macroalgal biomass underwent pyrolysis at 400 °C, followed by Fe₃O₄ impregnation, to improve surface functionality and create active sites for fluoride ion binding. Various factors affecting fluoride removal were systematically examined. A maximum fluoride removal effectiveness of 90.2% was attained under ideal circumstances (pH 2, 60 mg adsorbent dose, 30 mg/L fluoride concentration, and 150 min contact duration). Adsorption isotherm analysis showed that the Langmuir model provided a better fit (R² = 0.998) than the Freundlich model (R² = 0.941), with a maximum adsorption capacity (qₘ) of 3.41 mg/g, indicating monolayer adsorption on a homogeneous surface. Kinetic modeling revealed that the pseudo-second-order model best described the adsorption process (R² = 0.9943), suggesting chemisorption as the dominant mechanism, while the intraparticle diffusion model also showed a good fit (R² = 0.9524), implying its role in the rate-limiting step. Surface complexation, facilitated by the enhanced surface area and porosity of the iron-modified biochar, was identified as the primary mechanism of fluoride ion interaction. This study highlights the potential of Fe₃O₄-modified macroalgal biochar as an effective and sustainable solution for fluoride remediation in contaminated water sources. Full article

Dental caries is now recognised as a multifactorial disease shaped by complex interactions among genetic, epigenetic, microbiological, environmental, and social factors. This narrative review synthesises recent findings on the influence of genetic and epigenetic factors on caries susceptibility, exploring implications for personalised prevention strategies, including novel vaccine approaches. Numerous gene polymorphisms in pathways related to enamel formation, saliva composition, immune response, and taste perception have been linked to increased caries risk, with some effects modulated by sex and tooth-specific factors. Early-life environmental exposures (diet, tobacco, and antibiotic use) have been demonstrated to further alter risk through epigenetic modifications such as DNA methylation, microRNA regulation, and histone changes. The recognition of this landscape of inherited and acquired vulnerabilities has given rise to interest in innovative preventive measures. In particular, anti-caries vaccines targeting Streptococcus mutans are being developed using protein subunits, DNA constructs, and even plant-based antigen production. Notwithstanding the challenges that still need to be overcome—chiefly the achievement of robust mucosal immunity, the assurance of safety, and the enhancement of production—these vaccines are proving to be a promising addition to traditional oral hygiene and fluoride measures. The integration of genetic and epigenetic insights with immunological advances has the potential to facilitate the development of more effective, personalised interventions to prevent dental caries. Full article

This paper proposes an Adam-optimized Deep Belief Networks (Adam-DBNs) denoising method for throat-attached piezoelectric signals. The method aims to process mechanical vibration signals captured through polyvinylidene fluoride (PVDF) sensors attached to the throat region, which are typically contaminated by environmental noise and physiological noise. First, the short-time Fourier transform (STFT) is utilized to convert the original signals into the time–frequency domain. Subsequently, the masked time–frequency representation is reconstructed into the time domain through a diagonal average-based inverse STFT. To address complex nonlinear noise structures, a Deep Belief Network is further adopted to extract features and reconstruct clean signals, where the Adam optimization algorithm ensures the efficient convergence and stability of the training process. Compared with traditional Convolutional Neural Networks (CNNs), Adam-DBNs significantly improve waveform similarity by 6.77% and reduce the local noise energy residue by 0.099696. These results demonstrate that the Adam-DBNs method exhibits substantial advantages in signal reconstruction fidelity and residual noise suppression, providing an efficient and robust solution for throat-attached piezoelectric sensor signal enhancement tasks. Full article

Planar heaters are designed to deliver uniform heat across broad surfaces and serve as critical components in applications requiring energy efficiency, safety, and mechanical flexibility, such as wearable electronics and smart textiles. However, conventional metal-based heaters are limited by poor adaptability to curved or complex surfaces, low mechanical compliance, and susceptibility to oxidation-induced degradation. To overcome these challenges, we applied a protein-assisted electroless copper (Cu) plating strategy to electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofiber substrates to fabricate flexible, conductive planar heating membranes. For interfacial functionalization, a protein-based engineering approach using bovine serum albumin (BSA) was employed to facilitate palladium ion coordination and seed formation. The resulting membrane exhibited a dense, continuous Cu coating, low sheet resistance, excellent durability under mechanical deformation, and stable heating performance at low voltages. These results demonstrate that the BSA-assisted strategy can be effectively extended to complex three-dimensional fibrous membranes, supporting its scalability and practical potential for next-generation conformal and wearable planar heaters. Full article

β-catenin is a key regulator of osteoblast differentiation, proliferation, and bone homeostasis. Through its interaction with transcription factors such as TCF/LEF, Runx2, and Osx, it coordinates gene expression essential for osteogenesis. The aim of this review is to demonstrate how β-catenin signaling is modulated by various physiological and pathological factors, including mechanical loading, oxidative stress, HIV-1 gp120, fluoride, implant topography, and microRNAs. These factors influence Wnt/β-catenin signaling through different mechanisms, often exerting opposing effects on osteoblast function. By integrating these modulators, we provide a comprehensive view of the dynamic regulation of β-catenin in bone biology. Understanding this complexity may provide insight into novel therapeutic strategies targeting β-catenin in bone regeneration, metabolic bone diseases, and pathologies such as HIV-associated bone loss or osteosarcoma. Full article

Phosphate and fluoride ions are common water pollutants whose presence and excessive discharge cause potential hazards to the environment and human health. MOF materials commonly used to remove phosphate and fluoride ions are usually in powder form, with low recovery during regeneration. Herein, to address these issues, Fe₃O₄@La-Zr-MOFs magnetic composites for phosphate and fluoride removal were fabricated by means of the hydrothermal method. The adsorption properties of the adsorbent were systematically assessed by means of adsorption experiments. The magnetic Fe₃O₄@La-Zr-MOFs exhibited a magnetic recovery efficiency of 93%, and they could maintain outstanding adsorption performance at a broad range of pH values and superior selectivity for phosphate and fluoride ions. The adsorption process conformed to the Langmuir isotherm and pseudo-second-order models, indicating that it was dominated by monomolecular chemisorption. Further characterization of the Fe₃O₄@La-Zr-MOFs before and after adsorption and kinetic thermodynamic investigation revealed that the elimination mechanism of phosphate and fluoride ions by Fe₃O₄@La-Zr-MOFs includes ion exchange, electrostatic interactions, and surface complexation. This study demonstrates that magnetic reusable Fe₃O₄@La-Zr-MOFs composites have great promise for phosphate and fluoride removal and recovery. Full article

Presently, extensive research has been conducted on the electrochemical behavior of titanium ions in molten salt, especially in relation to titanium fluoride coordination. However, there is limited research on the coordination between titanium and oxygen. Consequently, this research delved into the influence of oxygen ions on the electrochemical behavior and coordination properties of titanium ions through the utilization of both electrochemical and spectroscopy techniques. The study involved the use of cyclic voltammetry (CV), square wave voltammetry (SWV), and the open-circuit potential (OCP) method to explore the electrochemical properties of titanium ions at different titanium-oxygen ratios. Furthermore, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were applied to assess the presence of titanium ions in molten salt and the coordination structure of titanium ions and anions in molten salts, respectively. The results demonstrate that with an increase in oxygen ion content, chloride ions are gradually replaced by oxygen ions, forming TiO_xCl_y^m− complexes. Full article

COVID-19 mortality is a complex phenomenon influenced by multiple factors. This study aimed to identify factors associated with death in COVID-19 patients by considering clinical, demographic, environmental, and socioeconomic conditions, using machine learning models and a national dataset from Mexico covering all pandemic waves. We integrated data from the national COVID-19 dataset, municipal-level socioeconomic indicators, and water quality contaminants (physicochemical and microbiological). Patients were assigned to one of four datasets (groundwater, lentic, lotic, and coastal) based on their municipality of residence. We trained XGBoost models to predict patient death or survival on balanced subsets of each dataset. Hyperparameters were optimized using a grid search and cross-validation, and feature importance was analyzed using SHAP values, point-biserial correlation, and XGBoost metrics. The models achieved strong predictive performance (F1 score > 0.97). Key risk factors included older age (≥50 years), pneumonia, intubation, obesity, diabetes, hypertension, and chronic kidney disease, while outpatient status, younger age (<40 years), contact with a confirmed case, and care in private medical units were associated with survival. Female sex showed a protective trend. Higher socioeconomic levels appeared protective, whereas lower levels increased risk. Water quality contaminants (e.g., manganese, hardness, fluoride, dissolved oxygen, fecal coliforms) ranked among the top 30 features, suggesting an association between environmental factors and COVID-19 mortality. Full article

Titanium and its alloy scaffolds are widely utilized in clinical settings; however, their biologically inert surfaces and inherent mechanical characteristics impede osteogenesis and soft tissue integration, thereby limiting their application. Selective laser melting (SLM) was employed to fabricate scaffolds with matched cortical bone mechanical properties, achieving a composite coating of hydroxyapatite complexed with trace elements of silicon, strontium, and fluoride (mHA), along with type I collagen (Col I) and fibrinogen (Fg), thus activating the scaffold surface. Initially, we utilized the excellent adhesive properties of dopamine to co-deposit mHA and polydopamine (PDA) onto porous Ti-6Al-4V scaffolds, which was followed by immobilization of type I collagen and fibrinogen onto PDA. This bioinorganic/bioprotein composite coating, formed via PDA bonding, exhibits excellent stability. Moreover, in vitro cell experiments demonstrate excellent biocompatibility of the porous Ti-6Al-4V scaffold with composite bioactive coatings on its surface. Preosteoblasts (MC3T3-E1) and human keratinocytes (HaCaT) exhibit enhanced adhesion and proliferation activity, and the osteogenic performance of the scaffold is significantly improved. The PDA-mHA-Col I-Fg composite-coated porous titanium alloy scaffold holds significant promise in enhancing the efficacy of percutaneous bone transplantation and requires further investigation. Full article

This study investigated the defluorination of PFOA and PFOS using a vacuum ultraviolet (VUV)/sulfite system, and evaluated its potential application in quantifying individual perfluoroalkyl substances (PFAS). Results showed that 81.9% and 87.5% defluorination of PFOA and PFOS were achieved after 120 min of photoreaction under conditions of pH 12 and 20 mM of sulfite. Higher pH and sulfite dosage facilitated the reaction, while competing ions could suppress the defluorination efficiency. Based on the optimized defluorination conditions for individual PFAS, the potential of fluoride release amount, as an indirect quantification indicator, was further assessed. A strong linearity between the fluoride release and initial PFAS concentration (R² > 0.999) was observed in the PFAS concentration range of 2–100 μM, and such linearity was also shown in the presence of sediment leachates. This correlation enabled the estimation of individual PFAS concentrations by measuring fluoride release after defluorination treatment. The approach was further demonstrated in an adsorption experiment, where calculated distribution coefficients (K_oc) for PFAS–sediment interactions were consistent with previously reported values, supporting the analytical validity of the method under controlled conditions. Overall, this work presents a simple and cost-effective indirect analytical strategy of applying a VUV/sulfite defluorination system for individual PFAS quantitative detection in complex environmental matrices. Full article

Conventional lithium extraction from spodumene via sulfuric acid roasting can achieve up to 98% recovery but suffers from high energy use, acidic residues, and purification complexity. This review evaluates alternative methods for both α- and β-spodumene, aiming for improved sustainability. For α-spodumene, Na₂SO₄–CaO salt roasting achieved >95% recovery at 900 °C via water leaching. Sodium carbonate roasting–NaOH leaching and mechanical activation–Na₂SO₄ roasting reached 95.9% and ~92%, respectively. High-pressure NaOH leaching reached 95.8%, while alkaline decomposition–acid leaching yielded 53.2–84.1%. Microwave-assisted calcination achieved up to 97% recovery, and fluoride-based roasting gave 93–98% but raised environmental concerns. Bioleaching is eco-friendly but slow, with <3.5% recovery. For β-spodumene, high-pressure leaching using sodium carbonate (>94%), sodium sulfate (90.7%–93.3%), sodium chloride (~93%), and nitric acid (~95%) provided high recoveries. Atmospheric leaching with HF and H₃PO₄ yielded ~90% and ~40%, respectively, while carbonic acid leaching reached 75% after multiple stages. Chlorination roasting achieved near-complete recovery. The Metso-Outotec high-pressure sodium carbonate leaching process is set for industrial-scale implementation at the Keliber project in 2025, confirming its scalability. Overall, these emerging processes have the potential to reduce energy input, reagent demand, and waste generation, offering practical pathways toward more sustainable lithium production from spodumene. Full article

Red mud (RM) is a strongly alkaline waste residue produced during alumina production, and its high alkali and fine particle characteristics are prone to cause soil, water, and air pollution. Phosphogypsum (PG), as a by-product of the wet process phosphoric acid industry, poses a significant risk of fluorine leaching and threatens the ecological environment and human health due to its high fluorine content and strong acidic properties. In this study, RM-based cemented paste backfill (RCPB) based on the synergistic curing of PG and ordinary Portland cement (OPC) was proposed, aiming to achieve a synergistic enhancement of the material’s mechanical properties and fluorine fixation efficacy by optimizing the slurry concentration (63–69%). Experimental results demonstrated that increasing slurry concentration significantly improved unconfined compressive strength (UCS). The 67% concentration group achieved a UCS of 3.60 MPa after 28 days, while the 63%, 65%, and 69% groups reached 2.50 MPa, 3.20 MPa, and 3.40 MPa, respectively. Fluoride leaching concentrations for all groups were below the Class I groundwater standard (≤1.0 mg/L), with the 67% concentration exhibiting the lowest leaching value (0.6076 mg/L). The dual immobilization mechanism of fluoride ions was revealed by XRD, TGA, and SEM-EDS characterization: (1) Ca²⁺ and F⁻ to generate CaF₂ precipitation; (2) hydration products (C-S-H gel and calixarenes) immobilized F⁻ by physical adsorption and chemical bonding, where the alkaline component of the RM (Na₂O) further promotes the formation of sodium hexafluoroaluminate (Na₃AlF₆) precipitation. The system pH stabilized at 9.0 ± 0.3 after 28 days, mitigating alkalinity risks. High slurry concentrations (67–69%) reduced material porosity by 40–60%, enhancing mechanical performance. It was confirmed that the synergistic effect of RM and PG in the RCPB system could effectively neutralize the alkaline environment and optimize the hydration environment, and, at the same time, form CaF₂ as well as complexes encapsulating and adsorbing fluoride ions, thus significantly reducing the risk of fluorine migration. The aim is to improve the mechanical properties of materials and the fluorine-fixing efficiency by optimizing the slurry concentration (63–69%). The results provide a theoretical basis for the efficient resource utilization of PG and RM and open up a new way for the development of environmentally friendly building materials. Full article