Search Results (339)

In the Mediterranean basin, olive cultivation occupies the largest share of agricultural land, due to the region’s favorable soil and climatic conditions. However, the intensification of farming systems has had negative environmental impacts, for which diversified approaches such as agroforestry offer a potential solution. The objective of the present study was to determine the growth of barley, triticale, and pea as cover crops, as well as the respective intercrops in olive orchards and their productivity. The results showed that the intercropping of pea with barley and triticale had the highest yields in dry biomass compared to the other treatments, while barley monoculture recorded the highest yield in terms of grain. The findings demonstrated that intercropping enhances resource-use efficiency, particularly in terms of land productivity, Radiation-Use Efficiency, and Water-Use Efficiency. However, competitive dynamics varied significantly between species and across years, with pea often exhibiting dominance in biomass production, while cereals showed trade-offs in seed yield components due to shading and interspecific competition. These findings can be used for sustainable intensification strategies, ensuring higher productivity while minimizing external inputs in climate-vulnerable regions. Full article

In this research article, a fast and efficient hybrid Maximum Power Point Tracking (MPPT) control technique is proposed for photovoltaic (PV) systems. The method combines two phases—offline and online—to estimate the appropriate duty cycle for operating the converter at the maximum power point (MPP). In the offline phase, temperature and irradiance inputs are used to compute the real-time reference peak power voltage through an Adaptive Neuro-Fuzzy Inference System (ANFIS). This estimated reference is then utilized in the online phase, where the Robust Backstepping Super-Twisting (RBST) controller treats it as a set-point to generate the control signal and continuously adjust the converter’s duty cycle, driving the PV system to operate near the MPP. The proposed RBST control scheme offers a fast transient response, reduced rise and settling times, low tracking error, enhanced voltage stability, and quick adaptation to changing environmental conditions. The technique is tested in MATLAB/Simulink under three different scenarios: continuous variation in meteorological parameters, sudden step changes, and partial shading. To demonstrate the superiority of the RBST method, its performance is compared with classical backstepping and integral backstepping controllers. The results show that the RBST-based MPPT controller achieves the minimum rise time of $0.018$$\mathrm{s}$, the lowest squared error of $0.3015$$\mathrm{V}$, the minimum steady-state error of $0.29$%, and the highest efficiency of $99.16$%. Full article

To support dual-carbon objectives and enhance the accuracy of rooftop distributed photovoltaic (PV) planning, this study proposes a multidimensional coupled evaluation framework that integrates an improved rooftop segmentation network (CESW-TransUNet), a residual-fusion ensemble, and physics-based shading and performance simulations, thereby correcting the bias of conventional 2-D area–based methods. First, CESW-TransUNet, equipped with convolution-enhanced modules, achieves robust multi-scale rooftop extraction and reaches an IoU of 78.50% on the INRIA benchmark, representing a 2.27 percentage point improvement over TransUNet. Second, the proposed residual fusion strategy adaptively integrates multiple models, including DeepLabV3+ and PSPNet, further improving the IoU to 79.85%. Finally, by coupling Ecotect-based shadow analysis with PVsyst performance modeling, the framework systematically quantifies dynamic inter-building shading, rooftop equipment occupancy, and installation suitability. A case study demonstrates that the method reduces the systematic overestimation of annual generation by 27.7% compared with traditional 2-D assessments. The framework thereby offers a quantitative, end-to-end decision tool for urban rooftop PV planning, enabling more reliable evaluation of generation and carbon-mitigation potential. Full article

Shaded resting zones in rotational grazing systems are prone to thermal stress due to limited ventilation and the congregation of animals during peak heat periods. Addressing these challenges requires sensing solutions that are not only accurate but also capable of adapting to dynamic environmental conditions and energy constraints. In this context, we present the development and simulation-based validation of a self-configurable IoT protocol for adaptive environmental monitoring. The approach integrates embedded machine learning, specifically a Random Forest classifier, to detect critical conditions using synthetic data of temperature, humidity, and CO₂. The model achieved an accuracy of 98%, with a precision of 98%, recall of 85%, and F1-score of 91% in identifying critical states. These results demonstrate the feasibility of embedding adaptive intelligence into IoT-based monitoring solutions. The protocol is conceived as a foundation for integration into physical devices and subsequent evaluation in farm environments such as rotational grazing systems. Full article

Partial shading in photovoltaic (PV) systems causes multiple local maximum power points (LMPPs), complicating tracking and reducing energy efficiency. Conventional maximum power point tracking (MPPT) methods, such as Perturb and Observe (P&O), often fail because of oscillations and entrapment at local maxima. To address these shortcomings, this study proposes a hybrid MPPT strategy combining artificial neural networks (ANNs) and the P&O algorithm to enhance tracking accuracy under partial shading while maintaining implementation simplicity. The research employs a detailed PV cell model in MATLAB/Simulink (2019b) that incorporates dynamic shading to simulate non-uniform irradiance. Within this framework, an ANN trained with the Levenberg–Marquardt algorithm predicts global maximum power points (GMPPs) from voltage and irradiance data, guiding and accelerating subsequent P&O operation. In the hybrid system, the ANN predicts the maximum power points (MPPs) to provide initial estimates, after which the P&O fine-tunes the duty cycle optimization in a DC-DC converter. The proposed hybrid ANN–P&O MPPT method achieved relative improvements of 15.6–49% in tracking efficiency, 16–20% in stability, and 14–54% in convergence speed compared with standalone P&O, depending on the irradiance scenario. This research highlights the potential of ANN-enhanced MPPT systems to maximize energy harvest in PV systems facing shading variability. Full article

Ultraviolet-B (UV-B, 280–315 nm) radiation is an increasingly relevant abiotic stressor under climate-change scenarios, yet crop-specific tolerance mechanisms remain insufficiently understood. We compared maize (Zea mays L.) and grain sorghum (Sorghum bicolor L.) seedlings exposed to eight UV-B durations (1–12 h), applied every second day over 14 days of juvenile growth. Highly sensitive, non-invasive biophoton emission imaging (NightShade^® LB 985), chlorophyll content measurements (SPAD-502), and morphophysiological traits (shoot/root lengths, biomass, root collar diameter) were assessed. Biophoton emission kinetics measured immediately and 24 h after exposure suggested differing temporal defense dynamics: maize showed an early modest increase, a mid-exposure reduction, and a later pronounced peak around 6 h. Sorghum tended to reach a dominant peak earlier (≈3 h) and maintain relatively steady emissions thereafter, potentially reflecting more uniform antioxidant activation. SPAD patterns aligned with these trends: maize retained higher chlorophyll at lower exposures (0–6 h; p < 0.05), whereas sorghum surpassed maize at extreme exposures (10–12 h; p = 0.036). Morphophysiological traits showed no significant treatment effects, though minor low-dose peaks suggested possible ROS-mediated stimulation. These results indicate species-specific UV-B acclimation patterns and demonstrate the utility of biophoton imaging as a rapid screening tool for assessing crop resilience. Full article

We perform large-eddy simulations (LESs) with realistic radiation, including topographic shading, and an advanced land surface model to investigate drainage flow dynamics in an idealized compound-slope mountain geometry. This allows an analysis not only of fully developed profiles in steady state—the subject of existing analytical solutions—but also of transient two- and three-dimensional dynamics. The evening onset of downslope flow is related to the duration of shadow front propagation along the eastern slopes, for which an analytic form is derived. We demonstrate that the flow response to this radiation pattern is mediated by the thermal inertia of the land through sensitivity to soil moisture. Onset timing differences on opposite sides of the peak are explained by convective structures that persist after sunset over the western slopes when topographic shading is considered. Although these preceding convective systems, as well as the presence of neighboring terrain, inhibit the initial development of drainage flows, the LES develops an approximately steady-state, fully developed flow over the finite slopes and finite nocturnal period. This allows a comparison to analytical models restricted to such cases. New analytical solutions based on surface heat flux boundary conditions, which can be estimated by the coupled land surface model, suggest the need for improved representation of the eddy diffusivity for analytical models of drainage flows. Full article

The main objective of this paper is to develop a maximum power point tracker (MPPT) for a photovoltaic module array (PVMA) under conditions of partial shading and sudden changes in solar irradiance. PVMAs exhibit nonlinear characteristics with respect to temperature and solar irradiance conditions. Therefore, when some modules in the array are shaded or when there is a sudden change in solar irradiance, the maximum power point (MPP) of the array will also change, and the power–voltage (P-V) characteristic curve may exhibit multiple peaks. Under such conditions, if the tracking algorithm employs a fixed step size, the time required to reach the MPP may be significantly prolonged, potentially causing the tracker to converge on a local maximum power point (LMPP). To address the issues mentioned above, this paper proposes a novel MPPT technique based on the nature-inspired idols algorithm (IA). The technique allows the promotion value (PM) to be adjusted through the anti-fans weight (afw) in the iteration formula, thereby achieving global maximum power point (GMPP) tracking for PVMAs. To verify the effectiveness of the proposed algorithm, a model of a 4-series–3-parallel PVMA was first established using MATLAB (2024b version) software under both non-shading and partial shading conditions. The voltage and current of the PVMAs were fed back, and the IA was then applied for GMPP tracking. The simulation results demonstrate that the IA proposed in this study outperforms existing MPPT techniques, such as particle swarm optimization (PSO), cat swarm optimization (CSO), and the bat algorithm (BA), in terms of tracking speed, dynamic response, and steady-state performance, especially when the array is subjected to varying shading ratios and sudden changes in solar irradiance. Full article

Partial shading poses a significant challenge to photovoltaic (PV) systems by degrading power output and overall efficiency, especially under non-uniform irradiance conditions. This paper proposes an advanced time-sharing maximum power point tracking (MPPT) control strategy implemented through a non-isolated single-phase multi-input microinverter architecture. The system enables individual power regulation for multiple PV modules while preserving their voltage–current (V–I) characteristics and eliminating the need for additional active switches. Building on the concept of distributed MPPT (DMPPT), a flexible full power processing (FPP) framework is introduced, wherein a single MPPT controller sequentially optimizes each module’s output. By leveraging the slow-varying nature of PV characteristics, the proposed algorithm updates control parameters every half-cycle of the AC output, significantly enhancing controller utilization and reducing system complexity and cost. The control strategy is validated through detailed simulations and experimental testing under dynamic partial shading scenarios. Results confirm that the proposed system maximizes power extraction, maintains voltage stability, and offers improved thermal performance, particularly through the integration of GaN power devices. Overall, the method presents a robust, cost-effective, and scalable solution for next-generation PV systems operating in variable environmental conditions. Full article

Cities need photovoltaic (PV) systems to meet climate-neutral goals, yet dense urban forms and variable weather limit their output. This review synthesizes how machine learning (ML) models capture both static factors (orientation, roof, and façade geometry) and dynamic drivers (irradiance, transient shading, and meteorology) to predict and optimize urban PV performance. Following PRISMA 2020, we screened 111 records and analyzed 61 peer-reviewed studies (2020–2025), eight Horizon-Europe projects, as well as market reports. Deep learning models—mainly artificial and convolutional neural networks—typically reduce the mean absolute error by 10–30% (median ≈ 15%) compared with physical or empirical baselines, while random forests support transparent feature ranking. Short-term irradiance variability and local shading are the dominant dynamic drivers; roof shape and façade tilt lead the static set. Industry evidence aligns with these findings: ML-enabled inverters and module-level power electronics increase the measured annual yields by about 3–15%. A compact meta-analysis shows a pooled correlation of r ≈ 0.966 (R² ≈ 0.933; 95% CI 0.961–0.970) and a pooled log error ratio of −0.16 (≈15% relative error reduction), with moderate heterogeneity. Key gaps remain, such as limited data from equatorial megacities, sparse techno-economic or life-cycle metrics, and few validations under heavy soiling. We call for open datasets from multiple cities and climates, and for on-device ML (Tiny Machine Learning) with uncertainty reporting to support bankable, city-scale PV deployment.” Full article

Integrating phase change materials (PCMs) into building envelopes offers a powerful method for enhancing thermal mass and reducing heating, ventilation, and air conditioning energy demand. This study provides a comprehensive analysis of combining PCMs with various roof designs (flat, gable, and domed) and shading strategies in a Mediterranean climate to optimize residential building performance. Through a 3E (energetic, environmental, and economic) assessment and computational fluid dynamics (CFD) modeling, we determined that the use of PCM23 significantly enhances occupant comfort, improving the predicted mean vote by 17% and enhancing overall thermal comfort by 14%. The most effective configuration, a gable roof with integrated PCMs, outperformed a flat roof by reducing annual energy consumption by 20% (1103 kWh). This optimal design also yielded substantial economic and environmental benefits, including a 16.2 TD/m² reduction in annual energy costs, a short investment payback period, and a 4% decrease in operational CO₂ emissions. These results highlight the significant potential of pairing PCMs with passive architectural features to create more energy-efficient, cost-effective, and comfortable living environments. Full article

Rapid urbanization in semi-arid heritage cities is accelerating land use/land cover (LULC) transitions, with critical implications for local climate regulation, surface energy balance, and environmental sustainability. This study investigates Jaipur, Jodhpur, and Udaipur (Rajasthan, India) between 2018 and 2024 to assess the influence of spatio-temporal dynamics of LULC on urban surface metrics. Multi-temporal satellite datasets were used to derive the index-based built-up index (IBI), surface urban heat island intensity (SUHI), Albedo, urban thermal field variance index (UTFVI), and bare soil index (BSI). The results reveal substantial built-up expansion—most pronounced in Udaipur (+26.7%)—coupled with vegetation loss (up to −23.8% in Jaipur) and progressive albedo decline (Sen’s slope ≈ −0.002 yr⁻¹). These transformations highlight suppressed surface reflectivity and enhanced heat absorption. A key and novel finding is the emergence of a counter-intuitive surface urban cool island (SUCI) effect, whereby urban cores exhibited daytime cooling and nighttime warming relative to rural surroundings. This anomaly is attributed to the rapid heating and poor nocturnal heat retention of bare, sparsely vegetated rural soils, contrasted with the thermal inertia and shading of urban surfaces. By documenting negative SUHI patterns and explicitly linking them to LULC trajectories, this study advances the understanding of urban climate dynamics in semi-arid contexts. The findings underscore the need for climate-sensitive planning—strengthening peri-urban green belts, regulating impervious expansion, and adopting albedo-enhancing construction materials—while safeguarding cultural heritage. More broadly, the study contributes empirical evidence from climatically vulnerable yet culturally significant cities, offering insights relevant to global SUHI research and sustainable urban development. Full article

This study is the first to directly compare natural dynamic penumbra shadows with experimentally replicated constant-intensity shadows on photovoltaic modules, providing new insights into the limitations of conventional shadow approximations found in the existing body of knowledge. Neutral density filters were deemed the most appropriate method for replicating a constant-intensity shadow, as they reduce visible light relatively uniformly across the primary silicon wavelength range. Preliminary experiments established the intensity values for each neutral density filter chosen to be able to match with the 29 dynamic penumbra shadows being replicated by both the size of shadow and the averaged intensity. The results revealed that while constant-intensity shadows and dynamic penumbra shadows produced similar overall power loss magnitudes, the constant-intensity shadows consistently led to higher losses, averaging 9.65% more, despite having the same average intensity and shadow size. Regression modelling showed similar curvature trends for both shading types (Adjusted R² = 0.895 for constant-intensity shadows and Adjusted R² = 0.743 for dynamic-intensity shadows), but statistical analyses, including the Mann–Whitney U-test (p = 0.00229), confirmed a significant difference between the power loss output for the two penumbra shadow conditions. Consequently, the null hypothesis was rejected, confirming that the simplified constant-intensity shadows represented in the literature cannot accurately replicate the behaviour of dynamic-intensity penumbra on photovoltaic modules. Full article

Amid expanding higher education and enhancing spatial quality, modern university campuses face challenges including inefficient space utilization and a disconnect from human-centered design. We developed a coupled model that integrates the analytic hierarchy process (AHP) with space syntax theory to identify and address functional fragmentation, limited accessibility, and diminished spatial vitality. The Delphi method was employed to determine weights on visual and traffic influence factors. Through spatial quantitative analysis using Depthmap software, we estimated spatial-efficiency discrepancies across 11 component types, including school gates, teaching buildings, and libraries. A case study was conducted at a university located in the hilly terrain of Conghua District, Guangzhou, China which revealed significant contradictions between subjective evaluations and objective data at components, such as the administrative building and gymnasium. These contradictions led to poor visual permeability, excessive path redundancy, and imbalanced functional layouts. Based on the results of this study, targeted optimization strategies were proposed, including permeable interface designs, path network reconfiguration, and the implementation of dynamic functional modules. These interventions were tailored to accommodate the humid subtropical climate, balancing shading, ventilation, and visual transparency. In this study, methodological support for the renovation of existing campus infrastructure was provided as theoretical and technical references for space renewal in tropical and subtropical academic environments and the enhancement of the quality and resilience of campus spaces. The results also broadened the application of interdisciplinary methods in university planning. Full article

Stream temperatures are expected to increase with warming air temperatures, yet the extent and aquatic health impacts vary significantly across heterogeneous landscapes. This study was conducted in a 3360-ha multi-land-use watershed in the Pacific Northwest region of the USA to assess and compare the driving factors for stream temperature heating, cooling, and cool-water refugia along a 12-km mainstem stream longitudinal profile. Study objectives were to (1) determine yearlong stream temperature variability along the entire stream longitudinal profile, and (2) assess stream-environment relationships influencing stream temperature dynamics across forest, agriculture, and urban landscapes within the watershed. Stream and riparian air temperatures, solar radiation, shade, and related stream-riparian characteristics were measured over six years at 21 stations to determine changes, along the longitudinal profile, of thermal sensitivity, maximum and minimum stream temperatures, and correlation between solar radiation and temperature increases, and potential causal factors associated with these changes. Solar radiation was a primary heating factor for an exposed agricultural land use reach with 57% effective shade, while southern stream aspects and incoming tributary conditions were primary factors for forested reaches with greater than 84% effective shade. Potential primary cooling factors were streambank height, groundwater inflows, and hyporheic exchange in an urban reach with moderate effective shade (79%) and forest riparian width (16 m). Combining watershed-scale analysis with on-site stream-environmental data collection helps assess primary temperature heating factors, such as solar radiation and shade, and potential cooling factors, such as groundwater and cool tributary inflows, as conditions change along the longitudinal profile. Full article