Search Results (709)

Although Cu 3D structures are widely used in electrocatalytic practice, this electrode has not been studied enough in relation to the electrochemical transformation of CO₂ to C2 products. Cu foam samples were deposited from acidic solutions with varying concentrations of primary components (H₂SO₄, CuSO₄, and Cl⁻ ions) with the aim of determining the relationship between catalyst structure and activity/selectivity in producing C2 gaseous compounds during CO₂ electrochemical reduction. The deposited samples were characterized using SEM and electrochemical techniques, including Pb underpotential deposition (UPD), to determine the contribution of crystal facets. The most efficient electrodes were found to be those deposited in a solution without Cl⁻ additives. Their effectiveness was related to the shape and size of the crystallites forming the branches. These crystallites create a spatial structure that supports C-C coupling and C2 gaseous compound formation. The higher catalytic activity and selectivity of this electrode may also be related to its lower Cu(111) facet input to the overall facet distribution and its higher number of structural defects. Despite the higher electrochemically active surface area of samples deposited in the presence of Cl⁻ ions, their lower activity is related to structural characteristics that cause possible mass transfer limitations. Full article

The hierarchical porosity and active sites of porous carbon materials have significant impacts on the oxygen reduction reaction (ORR) process. The heteroatom-doped porous carbon materials (Z67-900, Z8-900, Z11-900, Z12-900) were synthesized by pyrolysis of ZIFs to reveal the synergistic effect of hierarchical porosity and Co-N_x sites. The structures of prepared materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectra, and nitrogen adsorption. The results of electrocatalytic performance show that Z67-900 has the best performance among the four materials prepared. The onset potential (E₀) of Z67-900 is close to commercial Pt/C (20%), and the half-wave potential (E_1/2) of Z67-900 is 80 mV positive than that of Pt/C in an O₂-saturated 0.1 M KOH solution (1600 rpm) with sweep rate of 5 mV·s⁻¹. Moreover, Z67-900 has better methanol resistance. The hierarchical pore structure of Z67-900 facilitates mass transfer, while the Co-N_x sites provide active catalytic centers. This study provides a solid foundation for the rational design of highly efficient ZIF-derived heteroatom-doped catalysts. Full article

Among various H₂ production methods, splitting water using renewable electricity for H₂ production is regarded as a promising approach due to its high efficiency and zero carbon emissions. The oxygen evolution reaction (OER) is an important part of splitting water, but also the main bottleneck. The anodic oxygen evolution reaction (OER) for water electrolysis technology involves multi-electron/proton transfer and has sluggish reaction kinetics, which is the key obstacle to the overall efficiency of electrolyzing water. Therefore, it is necessary to develop highly efficient and cheap OER electrocatalysts to drive overall water splitting. Herein, a series of efficient RuO₂-Co₃O₄ composites were synthesized via a straightforward three-step process comprising solvothermal synthesis, ion exchange, and calcination. The results indicate that using 10 mg of RuCl₃·xH₂O and 15 mg of Co-MOF precursor in the second ion exchange step is the most effective way to acquire the Co₃O₄-RuO₂-10 (RCO-10) composite with the largest specific area and the best electrocatalytic performance after the calcination process. The optimal Co₃O₄-RuO₂-10 composite powder catalyst displays low overpotential (η₁₀ = 272 mV), a small Tafel slope (64.64 mV dec⁻¹), and good electrochemical stability in alkaline electrolyte; the overall performance of Co₃O₄-RuO₂-10 surpasses that of many related cobalt-based oxide catalysts. Furthermore, through integration with a carbon cloth substrate, Co₃O₄-RuO₂-10/CC can be directly used as a self-supporting electrode with high stability. This work presents a straightforward method to design Co₃O₄-RuO₂ composite array catalysts for high-performance electrocatalytic OER performance. Full article

Carbon-based metal-free catalysts, particularly those such as biomass-derived mesoporous activated carbon (AC) nanostructures, hold great promises for cost-effective and sustainable electrocatalysis for enhancing hydrogen evolution reaction (HER) performance in green energy technology. Neem and ginkgo leaves are rich in bioactive compounds and self-doping heteroatoms with naturally porous structures and act as a low-cost, sustainable biomass precursors for high-performance HER catalysts. In this study, mesoporous AC nanoflakes and nanosponges were synthesized using biomass precursors of neem and ginkgo leaves through a KOH activation process. Notably, AC nanosponges derived from ginkgo leaves exhibited outstanding physicochemical characteristics, including a sponge-like porous morphology with a large specific surface area of 1025 m²/g. For electrochemical evaluation in 0.5 M H₂SO₄, the G-AC sample revealed superior electrocatalytic HER performance, with a remarkably low overpotential of 26 mV at −10 mA/cm², a small Tafel slope of 24 mV/dec, and long-term durability over 30 h. These results depict biomass-derived mesoporous AC nanosponges to hold substantial potential for highly efficient hydrogen production, contributing significantly to the advancement of eco-friendly energy solutions. Full article

The advancement of efficient energy conversion and storage technologies is fundamentally linked to the development of electrochemical systems, including fuel cells, batteries, and electrolyzers, whose performance depends on key electrocatalytic reactions: hydrogen evolution (HER), oxygen evolution (OER), oxygen reduction (ORR), carbon dioxide reduction (CO₂RR), and nitrogen reduction (NRR). Beyond catalyst design, the electrolyte microenvironment significantly influences these reactions by modulating charge transfer, intermediate stabilization, and mass transport, making electrolyte engineering a powerful tool for enhancing performance. This review provides a comprehensive analysis of how fundamental electrolyte properties, including pH, ionic strength, ion identity, and solvent structure, affect the mechanisms and kinetics of these five reactions. We examine in detail how the electrolyte composition and individual ion contributions impact reaction pathways, catalytic activity, and product selectivity. For HER and OER, we discuss the interplay between acidic and alkaline environments, the effects of specific ions, interfacial electric fields, and catalyst stability. In ORR, we highlight pH-dependent activity, selectivity, and the roles of cations and anions in steering 2e⁻ versus 4e⁻ pathways. The CO₂RR and NRR sections explore how the electrolyte composition, local pH, buffering capacity, and proton sources influence activity and the product distribution. We also address challenges in electrolyte optimization, such as managing competing reactions and maximizing Faradaic efficiency. By comparing the electrolyte’s effects across these reactions, this review identifies general trends and design guidelines for enhancing electrocatalytic performance and outlines key open questions and future research directions relevant to practical energy technologies. Full article

The development of ternary metal oxide electrocatalysts with optimized electronic structures and surface morphologies has emerged as one of the effective strategies to improve the performance of electrochemical water splitting. In this work, ternary CoMoCe (CMC)-oxide electrocatalysts were successfully synthesized on nickel foam substrates via a hydrothermal technique and employed for their catalytic activity in an alkaline electrolyte. For comparison, binary counterparts (CoMo, CoCe, and MoCe) were also fabricated under similar conditions. The synthesized catalysts’ electrodes exhibited diverse surface architectures, including microporous-flake hybrids, ultrathin flakes, nanoneedle-assembled microspheres, and randomly oriented hexagonal structures. Among them, the ternary CoMoCe-oxide electrode exhibited outstanding bifunctional electrocatalytic activity, delivering low overpotentials of 124 mV for the hydrogen evolution reaction (HER) at −10 mA cm⁻², and 340 mV for the oxygen evolution reaction (OER) at 100 mA cm⁻², along with excellent durability. Furthermore, in full water-splitting configuration, the CMC||CMC and RuO₂||CMC electrolyzers required cell voltages of 1.69 V and 1.57 V, respectively, to reach a current density of 10 mA cm⁻². Remarkably, the CMC-based electrolyzer reached an industrially relevant current density of 1000 mA cm⁻² at a cell voltage of 2.18 V, maintaining excellent stability over 100 h of continuous operation. These findings underscore the impact of an optimized electronic structure and surface architecture on design strategies for high-performance ternary metal oxide electrocatalysts. Herein, a robust and straightforward approach is comprehensively presented for fabricating highly efficient ternary metal-oxide catalyst electrodes, offering significant potential for scalable water splitting. Full article

This work focuses on the sustainable green synthesis of magnetic iron oxide nanoparticles (Fe₃O₄NPs) using bioreductants derived from orange peel extracts for application in the efficient oxygen evolution reactions (OER). The synthesized catalysts were characterized using X-ray diffraction analysis, field emission scanning electron microscopy (FESEM), energy dispersive X-ray analysis (EDS), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and UV–visible spectroscopy. The Fe₃O₄NPs exhibit a well-defined spherical morphology with a larger Brunauer–Emmett–Teller surface area and a significant electrochemically active surface area. The green synthesis using orange peel extracts leads to an excellent electrocatalytic activity of the apparent spherical Fe₃O₄NPs (diameter of 9.62 ± 0.07 nm), which is explored for OER in an alkaline medium (1.0 M KOH) using linear-sweep and cyclic voltammetry techniques. These nanoparticles achieved a benchmark current density of 10 mA cm⁻² at a low overpotential of 0.3 V versus RHE, along with notable durability and stability. The outstanding OER electrocatalytic activity is attributed to their unique morphology, which offers large surface area and an ideal porous structure that enhances the adsorption and activation of reactive species. Furthermore, structural defects within the nanoparticles facilitate efficient electron transfer and migration of these species, further accelerating the OER process. Full article

The continuous increase in global energy demand necessitates the development of sustainable, clean, and highly efficient methods of energy generation. Electrochemical water splitting, comprising hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), represents a promising strategy but remains hindered by sluggish reaction kinetics and limited availability of highly active electrocatalysts especially under alkaline conditions. Addressing this challenge, we successfully synthesized a rGO-VO₂/W₅O₁₄ (rG-VO₂/W₅O₁₄) hydrogel electrocatalyst through a facile hydrothermal approach. The prepared composite distinctly reveals an advantageous hierarchical microstructure characterized by VO₂ nanoflakes uniformly distributed on the surface of rGO nanosheets, intricately integrated with W₅O₁₄ nanorods. Evaluated in a 1.0 M KOH electrolyte, the optimized rG-VO₂/W₅O₁₄-2 catalyst demonstrates remarkable electrocatalytic performance towards OER, achieving a low overpotential of 265.8 mV and a reduced Tafel slope of 81.9 mV dec⁻¹. Furthermore, the catalyst maintains robust stability with minimal performance degradation, exhibiting an overpotential of only 273.0 mV after 5000 cyclic stability tests. The superior catalytic activity and durability are attributed to the synergistic combination of enriched chemical composition, effective electron transfer, and abundant catalytic active sites inherent in the well-optimized rG-VO₂/W₅O₁₄-2 composite. Full article

Developing efficient and sustainable hydrogen production technologies is critical for advancing the global clean energy transition. This review highlights recent progress in the design, synthesis, and electrocatalytic applications of MXene-based materials for electrochemical water splitting. It discusses the fundamental mechanisms of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), and the structure–function relationships that govern electrocatalytic behavior. Emphasis is placed on the intrinsic structural and surface properties of MXenes, such as their layered architecture and tunable surface chemistry, which render them promising candidates for electrocatalysis. Despite these advantages, several practical limitations hinder their full potential, including oxidation susceptibility, restacking, and a limited number of active sites. Several studies have addressed these challenges using diverse engineering strategies, such as heteroatom doping; surface functionalization; and constructing MXene-based composites with metal chalcogenides, oxides, phosphides, and conductive polymers. These modifications have significantly improved catalytic activity, charge transfer kinetics, and long-term operational stability under various electrochemical conditions. Finally, this review outlines key knowledge gaps and emerging research directions, including defect engineering, single-atom integration, and system-level design, to accelerate the development of MXene-based electrocatalysts for sustainable hydrogen production. Full article

Electrocatalytic water splitting has been demonstrated to be a highly efficient and promising technology for green hydrogen production. However, the inefficiency and instability of the cathode hinder its wide application in water electrolysis. Herein, we report a rapid Joule heating method for synthesizing the Ru-Mo oxide catalyst. Comprehensive characterization results confirmed that the as-prepared catalyst featured an internal porous structure with low crystallinity, which weakened the strength of Ru-H bonds through structural and electronic modulation. The enhanced HER performance was attributed to the incorporation of Mo⁴⁺ species, which strengthened Ru-O-Mo interactions. As tested, the optimized catalyst exhibited ultralow overpotentials (25.08 mV and 120.52 mV @ 10 and 100 mA cm⁻², respectively) and excellent stability (100 h @ 100 mA cm⁻²) in a 1 M KOH solution. Meanwhile, the as-prepared catalyst was equipped in an anion exchange membrane (AEM) alkaline water electrolyzer, which could deliver 185 mA cm⁻² at only 2.16 V with 100% Faradaic efficiency. This study provides a feasible strategy for constructing highly efficient low-crystallinity electrocatalysts. Full article

Improving the catalytic performance of the oxygen evolution reaction (OER) for water splitting in acidic media is crucial for the production of clean and renewable hydrogen energy. Herein, we study the OER electrocatalytic properties of various active sites on four exposed (110) and ($\overline{1}$10) surfaces of Sn-doped RuO₂ (Sn/RuO₂) with antiferromagnetic arrangements in acidic environments. The Sn/RuO₂ bulk structure with the Cm space group exhibits favorable thermodynamic stability. The coordinatively unsaturated metal (M_cus) sites distributed on the right branch of the volcano plot are generally more active than the bridge-bonded lattice oxygen (O_br) sites located on the left. Different from the conventional knowledge that the most active site is located in the nearest neighbor of the doped atom, it has a lower OER overpotential when the active site is 3.6 Å away from the doped Sn atom. Among the sites studied, the 46-Ru_cus site exhibits the optimal OER catalytic performance. The inherent factors affecting the OER activity of each site on the Sn/RuO₂ surface are further analyzed, including the center of the d/p band at the active sites, the average electrostatic potential of the ions, and the number of transferred electrons. This work provides a reminder for the selection of active sites used to evaluate catalytic performance, which will benefit the development of efficient OER electrocatalysts. Full article

Because the interfacial Cu⁰/Cu⁺ in Cu-based electrocatalyst promotes CO₂ electroreduction activity, it would be highly desirable to physically separate Cu-based nanoparticles through coating shells and load them onto porous carriers. Herein, multilayered graphene-coated Cu (Cu@G) nanoparticles with tailorable core diameters (28.2–24.2 nm) and shell thicknesses (7.8–3.0 layers) were fabricated via lased ablation in liquid. A thin Cu₂O layer was confirmed between the interface of the Cu core and the graphene shell, providing an interfacial Cu⁰/Cu⁺. Cu@G cross-linked biochars (Cu@G/Bs) with developed porosity (31.8–155.9 m²/g) were synthesized. Morphology, crystalline structure, porosity, and elemental chemical states of Cu@G and Cu@G/Bs were characterized. Cu@G/Bs captured CO₂ with a maximum sorption capacity of 107.03 mg/g at 0 °C. Furthermore, 95.3–97.1% capture capacity remained after 10 cycles. Cu@G/Bs exhibited the most superior performance with 40.7% of FE_C2H4 and 21.7 mA/cm² of current density at −1.08 V vs. RHE, which was 1.7 and 2.7 times higher than Cu@G. Synergistic integration of developed porosity for efficient CO₂ capture and the fast charge transfer rate of interfacial Cu₂O/Cu enabled this improvement. Favorable long-term stability of the phase/structure and CO₂ electroreduction activity were present. This work provides new insight for integrating Cu@G and a biochar platform to efficiently capture and electro-reduce CO₂. Full article

A series of Cu-MnO_x/GF catalytic electrodes, with graphite felt (GF) pretreated via microwave modification as the catalyst carrier, were prepared under various hydrothermal conditions and characterized using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), X-ray photoelectron spectroscopy (XPS), N₂ adsorption–desorption, and Raman spectroscopy. The catalytic oxidation activity of catalytic Cu-MnO_x/GF electrodes toward toluene was evaluated in an all-solid-state electrocatalytic device under mild operating conditions. The evaluation results demonstrated that the microwave-modified catalytic electrode exhibited high electrocatalytic activity toward toluene oxidation, with Cu-MnO_x/700W-GF exhibiting significantly higher catalytic activity, indicating that an increase in catalyst loading capacity can promote the removal of toluene. Only CO₂ and CO were detected, with no other intermediates observed in the reaction process. Moreover, the catalytic effect was significantly affected by the relative humidity. The catalytic oxidation of toluene can be fully realized under a certain humidity, indicating that the conversion of H₂O to strongly oxidizing ·OH on the catalytic electrode is a key step in this reaction. Full article

Metal–organic frameworks (MOFs) have characteristics such as a large specific surface area, distinct functional sites, and an adjustable pore size. However, the inherent low conductivity of MOFs significantly affects the charge transfer efficiency when they are used for electrocatalytic sensing. Combining MOFs with conductive materials can compensate for these deficiencies. For MOF/metal nanoparticle composites (e.g., composites with gold, silver, platinum, and bimetallic nanoparticles), the high electrical conductivity and catalytic activity of metal nanoparticles are utilized, and MOFs can inhibit the agglomeration of nanoparticles. MOF/carbon-based material composites integrate the high electrical conductivity and large specific surface area of carbon-based materials. MOF/conductive polymer composites offer good flexibility and tunability. MOF/multiple conductive material composites exhibit synergistic effects. Although MOF composites provide an ideal platform for electrocatalytic reactions, current research still suffers from several issues, including a lack of comparative studies, insufficient research on structure–property correlations, limited practical applications, and high synthesis costs. In the future, it is necessary to explore new synthetic pathways and seek; inexpensive alternative raw materials. Full article

Catalytic and bioelectrocatalytic properties of four white rot fungal laccases (Trametes hirsuta, ThL; Coriolopsis caperata, CcL; Steccherinum murashkinskyi, SmL; and Antrodiella faginea, AfL) from different orthologous groups were comparatively studied in homogeneous reactions of electron donor substrate oxidation and in a heterogeneous reaction of dioxygen electroreduction. The ThL and CcL laccases belong to high-redox-potential enzymes (E⁰_T1 = 780 mV), while the AfL and SmL laccases are medium-redox-potential enzymes (E⁰_T1 = 620 and 650 mV). We evaluated the efficiency of laccases in mediatorless bioelectrocatalytic dioxygen reduction by the steady-state potential (E_ss), onset potential (E_onset), half-wave potential (E_1/2), and the slope of the linear segment of the polarization curve. A good correlation was observed between the T1 center potential of the laccases and their electrocatalytic characteristics; however, no correlation with the homogeneous reactions of electron donor substrates’ oxidation was detected. The results obtained are discussed in the light of the known data on the three-dimensional structures of the laccases studied. Full article