Search Results (368)

This study presents an analysis of the condition of street lighting based on a selected typical installation in one of the 1459 rural communes in Poland. The analysis was carried out on the basis of publicly available statistical data, local government reports, and information contained in national and European strategic documents. During the analysis, numerous irregularities and differences in the quality and energy efficiency of the lighting infrastructure were indicated. It was found that outdated sodium luminaires with high energy consumption, low durability, and limited luminous efficacy are used in many cases, which generates significant operating costs and negatively affects the environment. The authors emphasize that a lack of regular and professional lighting audits leads to the suboptimal use of energy resources, an insufficient level of road safety, and failure to adapt lighting to current technical standards and the needs of road users. A lighting audit is a key tool for diagnosing the technical condition, efficiency, and compliance of installations with relevant regulations and recommendations. It also allows for the identification of potential savings and determining the directions of modernization and implementation of energy-saving technologies, such as LED luminaires and intelligent control systems.The presented analysis demonstrates that energy audits are an effective tool for confirming efficiency improvements and enhancing visual safety conditions through better compliance with photometric standards (luminance, lighting uniformity). Direct accident statistics were not within the scope of this study. Full article

Transparent building envelopes significantly increase energy demands due to low thermal resistance and solar heat gain, while conventional double-skin facades may lead to overheating and high cooling loads in the summer. This study proposes a novel earth-to-air heat exchanger (EAHE)-assisted ventilated double-skin facade (VDSF) system utilizing low-grade shallow geothermal energy for year-round thermal regulation of transparent building envelopes. A numerical model of this coupled system was developed and validated to estimate the thermal performance of the EAHE-assisted VDSF system in a hot-summer-and-cold-winter climate. Parametric study was conducted to investigate the impact of some key design parameters on thermal performance of the EAHE-assisted VDSF system and further reveal recommended design parameters of this coupled system. The results indicate that the EAHE-VDSF system reduces annual accumulated cooling loads by 20.3% to 76.5% and heating loads by 19.6% to 47.1% in comparison to a conventional triple-glazed, non-ventilated facade. The cavity temperature of the VDSF decreases by 15 °C on average in the summer, effectively addressing the overheating issue in DSFs. The proposed coupled EAHE-VDSF system shows promising energy-saving potential and ensures stability and consistency in the thermal regulation of transparent building envelopes. Full article

Personal comfort systems (PCSs), which provide targeted heating or cooling to specific body parts, have emerged as a promising solution to enhance occupant comfort while reducing energy use in buildings. Among the many factors influencing PCS performance, heat transfer mechanisms (HTMs) play a pivotal role. However, a critical gap remains in the literature regarding the identification of optimal HTMs for achieving both thermal comfort and energy efficiency in PCSs. To address this gap, our study investigates the impact of conduction, convection, and radiation in PCSs on thermal comfort enhancement and energy performance under both heating and cooling modes. A meta-analysis was conducted, extracting data from 64 previous studies to evaluate the effects of HTMs of PCSs on thermal sensation vote (TSV), overall comfort (OC) and corrective energy power (CEP). Results indicate that PCSs typically improve users’ thermal sensation and comfort by about one scale unit in both heating and cooling modes. Radiative HTM is the most effective individual method, while combined conductive and convective HTMs perform best overall. Most PCSs operate efficiently, consuming less than 200 W/°C, with conduction in heating and convection in cooling being recommended for optimal comfort and energy efficiency. These findings suggest that selecting optimal HTMs for PCSs is crucial for achieving maximum comfort performance and energy savings. Data on combined HTMs of PCSs remain limited, underscoring the need for further research in this area. Future research should prioritize optimizing HTMs, especially radiative and combined methods, to maximize comfort and energy savings in PCS design. Full article

Using the Kaya identity and LMDI method, this study analyzes the influence of population, GDP per capita, energy intensity, and carbon intensity on Xinjiang’s carbon emissions, and compares the effects of industrial structure, energy intensity, and carbon intensity on the industrial sectors during the Eighth to Twelfth Five-Year Plan (FYP) periods. Key findings are as follows: (1) Xinjiang’s carbon emissions center on resource- and energy-intensive sectors, emissions from sectors such as extraction of petroleum and natural gas, fuel processing, chemicals, ceramics and cement, iron and steel, and non-ferrous and power generation accounted for 62% of carbon emissions in 2015; (2) after the Sixth FYP, GDP per capita effect turned into the core driver of carbon emission growth, while the population effect played an auxiliary role. Meanwhile, the energy intensity effect exerted a marked inhibitory impact on the increase in carbon emissions, yet the restraining effect of carbon intensity was comparatively limited; (3) during the Eighth to Twelfth FYPs, carbon emission growth was mainly attributed to industrial structure effects of the mining and washing of coal, extraction of petroleum and natural gas, fuel processing, chemicals, ceramics and cement, iron and steel, non-ferrous and power generation. Energy intensity and carbon intensity effects in various industries inhibited emission growth. Based on new trends in Xinjiang’s socioeconomic development, policy recommendations proposed including promoting the low-carbon transformation of industrial structure, profound restructuring of energy consumption, and improving energy efficiency by advancing energy-saving technology. Full article

Oases in arid regions are crucial for sustaining agricultural production and ecological stability, yet few studies have simultaneously examined the coupled dynamics of land use/cover change (LUCC), carbon emissions, and ecosystem service value (ESV) at the oasis–agricultural scale. This gap limits our understanding of how different land use trajectories shape trade-offs between carbon processes and ecosystem services in fragile arid ecosystems. This study examines the spatiotemporal interactions between land use carbon emissions and ESV from 1990 to 2020 in the Wensu Oasis, Northwest China, and predicts their future trajectories under four development scenarios. Multi-period remote sensing data, combined with the carbon emission coefficient method, modified equivalent factor method, spatial autocorrelation analysis, the coupling coordination degree model, and the PLUS model, were employed to quantify LUCC patterns, carbon emission intensity, ESV, and its coupling relationships. The results indicated that (1) cultivated land, construction land, and unused land expanded continuously (by 974.56, 66.77, and 1899.36 km²), while grassland, forests, and water bodies declined (by 1363.93, 77.92, and 1498.83 km²), with the most pronounced changes occurring between 2000 and 2010; (2) carbon emission intensity increased steadily—from 23.90 × 10⁴ t in 1990 to 169.17 × 10⁴ t in 2020—primarily driven by construction land expansion—whereas total ESV declined by 46.37%, with water and grassland losses contributing substantially; (3) carbon emission intensity and ESV exhibited a significant negative spatial correlation, and the coupling coordination degree remained low, following a “high in the north, low in the south” distribution; and (4) scenario simulations for 2030–2050 suggested that this negative correlation and low coordination will persist, with only the ecological protection scenario (EPS) showing potential to enhance both carbon sequestration and ESV. Based on spatial clustering patterns and scenario outcomes, we recommend spatially differentiated land use regulation and prioritizing EPS measures, including glacier and wetland conservation, adoption of water-saving irrigation technologies, development of agroforestry systems, and renewable energy utilization on unused land. By explicitly linking LUCC-driven carbon–ESV interactions with scenario-based prediction and evaluation, this study provides new insights into oasis sustainability, offers a scientific basis for balancing agricultural production with ecological protection in the oasis of the arid region, and informs China’s dual-carbon strategy, as well as the Sustainable Development Goals. Full article

Additive manufacturing (AM), or 3D printing, is increasingly recognised as a disruptive production technology with the capacity to reduce greenhouse gas (GHG) emissions across manufacturing and transportation sectors. By enabling material efficiency, lightweighting, part consolidation, and decentralised, on-demand production, AM offers pathways to lower embodied energy, minimise waste, and shorten supply chains. This review critically evaluates AM’s role in decarbonisation, with a focus on clean transportation applications, including electric vehicles, fuel cells, and hydrogen storage systems. Case studies quantify energy savings, operational efficiency gains, and life-cycle GHG reductions compared to conventional manufacturing routes. The analysis also addresses technical and economic limitations—such as material availability, scalability, certification, and cost competitiveness—and explores synergies with circular economy principles, digital design optimisation, and artificial intelligence. Policy recommendations and industry–academia collaboration models are proposed to accelerate AM adoption, integrate renewable energy sources, and strengthen recycling infrastructure. By synthesising technical, economic, and policy perspectives, the study positions AM as a critical enabler of net-zero manufacturing and a catalyst for sustainable industrial transformation. Full article

Food safety management has evolved with the Hazard Analysis and Critical Control Point (HACCP) system serving as a global benchmark. However, conventional HACCP does not explicitly address environmental sustainability, leading to challenges such as excessive water use, chemical discharge, and energy inefficiency. Green HACCP extends traditional HACCP by integrating Environmental Respect Practices (ERPs) to fill this critical gap between food safety and sustainability. This study is presented as a conceptual paper based on a structured literature review combined with illustrative industry applications. It analyzes the principles, implementation challenges, and economic viability of Green HACCP, contrasting it with conventional systems. Evidence from recent reports and industry examples shows measurable benefits: water consumption reductions of 20–25%, energy savings of 10–15%, and improved compliance readiness through digital monitoring technologies. It explores how digital technologies—IoT for real-time monitoring, AI for predictive optimization, and blockchain for traceability—enhance efficiency and sustainability. By aligning HACCP with sustainability goals and the United Nations Sustainable Development Goals (SDGs), this paper provides academic contributions including a clarified conceptual framework, quantified advantages, and policy recommendations to support the integration of Green HACCP into global food safety systems. Industry applications from dairy, seafood, and bakery sectors illustrate practical benefits, including waste reduction and improved compliance. This study concludes with policy recommendations to integrate Green HACCP into global food safety frameworks, supporting broader sustainability goals. Overall, Green HACCP demonstrates a cost-effective, scalable, and environmentally responsible model for future food production. Full article

The increased usage of smart sensors has introduced both opportunities and complexities in managing residential energy consumption. Despite advancements in sensor data analytics and machine learning (ML), existing energy management systems (EMS) remain limited in interpretability, adaptability, and user engagement. This paper presents EnergiQ, an intelligent, end-to-end platform that leverages sensors and Large Language Models (LLMs) to bridge the gap between technical energy analytics and user comprehension. EnergiQ integrates smart plug-based IoT sensing, time-series ML for device profiling and anomaly detection, and an LLM reasoning layer to deliver personalized, natural language feedback. The system employs statistical feature-based XGBoost classifiers for appliance identification and hybrid CNN-LSTM autoencoders for anomaly detection. Through dynamic user feedback loops and instruction-tuned LLMs, EnergiQ generates context-aware, actionable recommendations that enhance energy efficiency and device management. Evaluations demonstrate high appliance classification accuracy (94%) using statistical feature-based XGBoost and effective anomaly detection across varied devices via a CNN-LSTM autoencoder. The LLM layer, instruction-tuned on a domain-specific dataset, achieved over 91% agreement with expert-written energy-saving recommendations in simulated feedback scenarios. By translating complex consumption data into intuitive insights, EnergiQ empowers consumers to engage with energy use more proactively, fostering sustainability and smarter home practices. Full article

Enhancing the real-world performance of sustainably designed and certified green buildings remains a significant challenge, particularly in hot climates where efforts to improve thermal comfort often conflict with energy efficiency goals. In the United Arab Emirates (UAE), even newly constructed facilities with green building certifications present opportunities for retrofitting and performance optimization. This study investigates the energy and thermal comfort performance of a LEED Gold-certified, mixed-use university campus in Dubai through a calibrated digital twin developed using IES thermal modelling software. The analysis evaluated existing sustainable design strategies alongside three retrofit energy conservation measures (ECMs): (1) improved building envelope U-values, (2) installation of additional daylight sensors, and (3) optimization of fan coil unit efficiency. Simulation results demonstrated that the three ECMs collectively achieved a total reduction of 15% in annual energy consumption. Thermal comfort was assessed using operative temperature distributions, Predicted Mean Vote (PMV), and Predicted Percentage of Dissatisfaction (PPD) metrics. While fan coil optimization yielded the highest energy savings, it led to less favorable comfort outcomes. In contrast, enhancing envelope U-values maintained indoor conditions consistently within ASHRAE-recommended comfort zones. To further support energy reduction and progress toward Net Zero targets, the study also evaluated the integration of a 228.87 kW rooftop solar photovoltaic (PV) system, which offset 8.09% of the campus’s annual energy demand. By applying data-driven thermal modelling to assess retrofit impacts on both energy performance and occupant comfort in a certified green building, this study addresses a critical gap in the literature and offers a replicable framework for advancing building performance in hot climate regions. Full article

A computational fluid dynamics (CFD) numerical simulation methodology was implemented to model transient heating processes in steel industry reheating furnaces, targeting combustion efficiency optimization and carbon emission reduction. The effects of oxygen concentration (O₂%) and different fuel types on the flow and heat transfer characteristics were investigated under both oxygen-enriched combustion and MILD oxy-fuel combustion. The results indicate that MILD oxy-fuel combustion promotes flue gas entrainment via high-velocity oxygen jets, leading to a substantial improvement in the uniformity of the furnace temperature field. The effect is most obvious at O₂% = 31%. MILD oxy-fuel combustion significantly reduces NOx emissions, achieving levels that are one to two orders of magnitude lower than those under oxygen-enriched combustion. Under MILD conditions, the oxygen mass fraction in flue gas remains below 0.001 when O₂% ≤ 81%, indicating effective dilution. In contrast, oxygen-enriched combustion leads to a sharp rise in flame temperature with an increasing oxygen concentration, resulting in a significant increase in NOx emissions. Elevating the oxygen concentration enhances both thermal efficiency and the energy-saving rate for both combustion modes; however, the rate of improvement diminishes when O₂% exceeds 51%. Based on these findings, MILD oxy-fuel combustion using mixed gas or natural gas is recommended for reheating furnaces operating at O₂% = 51–71%, while coke oven gas is not. Full article

Promoting energy efficiency in the Italian production sector is significantly hampered by the lack of knowledge, the scarcity and the limited distribution of tools for supporting energy audits in small and medium-sized enterprises (SMEs) in a wide range of Italian economic sectors (industry, tertiary sector, transport). The Advanced Tool for ENErgy Audit for SMEs, ATENEA4SME, is intended to help SMEs promote energy-efficiency projects, supports energy audits and self-evaluation of energy consumption. The tool uses an original mathematical model that takes into account the results of questionnaires and a multi-criteria analysis to generate recommendations for energy efficiency investments. This article will give a thorough explanation of the tool, emphasizing and outlining the sections as well as the procedures to get the ultimate summary of the energy usage of the enterprises under investigation and the potential for energy saving. From a technological and financial perspective, the tool helps to remove obstacles to the development of energy-efficiency measures. In this article, the IT and methodological structure of the tool will therefore be extensively described, and its operation for the context of SMEs will be illustrated, with application cases. Ample space will be allocated to the dissemination campaign and the replicability of the tool for all economic sectors of the industrial and tertiary sectors. Full article

As the global energy transition accelerates, the integration of solar power and artificial intelligence (AI) technologies offers new pathways for sustainable local development. This study examines four Serbian municipalities—Šabac, Sombor, Pirot, and Čačak—to assess how AI-enabled solar power systems can enhance energy resilience, reduce emissions, and support community-level sustainability goals. Using a mixed-method approach combining spatial analysis, predictive modeling, and stakeholder interviews, this research study evaluates the performance and institutional readiness of local governments in terms of implementing intelligent solar infrastructure. Key AI applications included solar potential mapping, demand-side management, and predictive maintenance of photovoltaic (PV) systems. Quantitative results show an improvement >60% in forecasting accuracy, a 64% reduction in system downtime, and a 9.7% increase in energy cost savings. These technical gains were accompanied by positive trends in SDG-aligned indicators, such as improved electricity access and local job creation in the green economy. Despite challenges related to data infrastructure, regulatory gaps, and limited AI literacy, this study finds that institutional coordination and leadership commitment are decisive for successful implementation. The proposed AI–Solar Integration for Local Sustainability (AISILS) framework offers a replicable model for emerging economies. Policy recommendations include investing in foundational digital infrastructure, promoting low-code AI platforms, and aligning AI–solar projects with SDG targets to attract EU and national funding. This study contributes new empirical evidence on the digital–renewable energy nexus in Southeast Europe and underscores the strategic role of AI in accelerating inclusive, data-driven energy transitions at the municipal level. Full article

Heating, ventilation, and air-conditioning (HVAC) systems account for the largest share of energy consumption in European Union (EU) buildings, representing approximately 40% of the final energy use and contributing significantly to carbon emissions. Latent thermal energy storage (LTES) using phase change materials (PCMs) has emerged as a promising strategy to enhance HVAC efficiency. This review systematically examines the role of latent thermal energy storage using phase change materials (PCMs) in optimizing HVAC performance to align with EU climate targets, including the Energy Performance of Buildings Directive (EPBD) and the Energy Efficiency Directive (EED). By analyzing advancements in PCM-enhanced HVAC systems across residential and commercial sectors, this study identifies critical pathways for reducing energy demand, enhancing grid flexibility, and accelerating the transition to nearly zero-energy buildings (NZEBs). The review categorizes PCM technologies into organic, inorganic, and eutectic systems, evaluating their integration into thermal storage tanks, airside free cooling units, heat pumps, and building envelopes. Empirical data from case studies demonstrate consistent energy savings of 10–30% and peak load reductions of 20–50%, with Mediterranean climates achieving superior cooling load management through paraffin-based PCMs (melting range: 18–28 °C) compared to continental regions. Policy-driven initiatives, such as Germany’s renewable integration mandates for public buildings, are shown to amplify PCM adoption rates by 40% compared to regions lacking regulatory incentives. Despite these benefits, barriers persist, including fragmented EU standards, life cycle cost uncertainties, and insufficient training. This work bridges critical gaps between PCM research and EU policy implementation, offering a roadmap for scalable deployment. By contextualizing technical improvement within regulatory and economic landscapes, the review provides strategic recommendations to achieve the EU’s 2030 emissions reduction targets and 2050 climate neutrality goals. Full article

Recently, solar energy technologies are a cornerstone of the global effort to transition towards cleaner and more sustainable energy systems. However, in many rural areas of developing countries, unreliable electricity severely impacts healthcare delivery, resulting in reduced medical efficiency and increased risks to patient safety. This review explores the transformative potential of solar energy as a sustainable solution for powering healthcare facilities, reducing dependence on fossil fuels, and improving health outcomes. Consequently, energy harvesting is a vital renewable energy source that captures abundant solar and thermal energy, which can sustain medical centers by ensuring the continuous operation of life-saving equipment, lighting, vaccine refrigeration, sanitation, and waste management. Beyond healthcare, it reduces greenhouse gas emissions, lowers operational costs, and enhances community resilience. To address this issue, the paper reviews critical solar energy technologies, energy storage systems, challenges of energy access, and successful solar energy implementations in rural healthcare systems, providing strategic recommendations to overcome adoption challenges. To fulfill the aims of this study, a focused literature review was conducted, covering publications from 2005 to 2025 in the Scopus, ScienceDirect, MDPI, and Google Scholar databases. With targeted investments, policy support, and community engagement, solar energy can significantly improve healthcare access in underserved regions and contribute to sustainable development. Full article

The present study implements novel innovative geostatistical imaging using precision agriculture (PA) under sugarbeet field conditions. Two driplines layout designs (d.l.d.) and soil water content (SWC)–irrigation treatments (A: d.l.d. = 1.00 m driplines spacing × 0.50 m emitters inline spacing; B: d.l.d. = 1.50 m driplines spacing × 0.50 m emitters inline spacing) were applied, with two subfactors of clay loam and clay soils (laboratory soil analysis) for modeling (evaluation of seven models) TDR multi-sensor network measurements. Different sensor calibration methods [method 1(M1) = according to factory; method 2 (M2) = according to Hook and Livingston] were applied for the geospatial two-dimensional (2D) imaging of accurate GIS maps of rootzone soil moisture profiles, soil apparent dielectric Ka profiles, and granular and hydraulic parameters profiles, in multiple soil layers (0–75 cm depth). The modeling results revealed that the best-fitted geostatistical model for soil apparent dielectric Ka was the Gaussian model, while spherical and exponential models were identified to be the most appropriate for kriging modelling, and spatial and temporal imaging was used for accurate profile SWC ${\theta v}_{TDR}$(m³·m⁻³) M1 and M2 maps using TDR sensors. The resulting PA profile map images depict the spatio-temporal soil water and apparent dielectric Ka variability at very high resolutions on a centimeter scale. The best geostatistical validation measures for the PA profile SWC ${\theta v}_{TDR}$ maps obtained were MPE = −0.00248 (m³·m⁻³), RMSE = 0.0395 (m³·m⁻³), MSPE = −0.0288, RMSSE = 2.5424, ASE = 0.0433, Nash–Sutcliffe model efficiency NSE = 0.6229, and MSDR = 0.9937. Based on the results, we recommend d.l.d. A and sensor calibration method 2 for the geospatial 2D imaging of PA GIS maps because these were found to be more accurate, with the lowest statistical and geostatistical errors, and the best validation measures for accurate profile SWC imaging were obtained for clay loam over clay soils. Visualizing sensors’ soil moisture results via geostatistical maps of rootzone profiles have practical implications that assist farmers and scientists in making informed, better and timely environmental irrigation engineering decisions, to save irrigation water, increase water use efficiency and crop production, optimize energy, reduce crop costs, and manage water resources sustainably. Full article