Search Results (523)

With the increasing integration of renewable energy sources and power electronic converters, Grid-Forming (GFM) technologies such as Virtual Synchronous Generators (VSGs) have emerged as key enablers of future power systems. However, conventional VSG control strategies with fixed parameters often fail to maintain transient stability under dynamic grid conditions. This paper proposes a novel adaptive GFM control framework based on physics-informed reinforcement learning, targeting transient power angle stability in systems with high renewable penetration. An adaptive controller, termed the 3N-D controller, is developed to periodically update the virtual inertia and damping coefficients of VSGs based on real-time system observations, enabling anticipatory adjustments to evolving operating conditions. The controller leverages a reinforcement learning architecture embedded with physical priors, which captures the high-order differential relationships between rotor angle dynamics and control variables. This approach enhances generalization, reduces data dependency, and mitigates the risk of local optima. Comprehensive simulations on the IEEE-39 bus system with varying VSG penetration levels validate the proposed method’s effectiveness in improving system stability and control flexibility. The results demonstrate that the physics-embedded GFM strategy can significantly enhance the transient stability and adaptability of future power grids. Full article

With the implementation of China’s “dual carbon” strategy, the installed capacity of new energy has grown rapidly. Wind power and photovoltaic power have accounted for more than 40%, but the integration of power electronic apparatus into the grid has resulted in the manifestation of a system with “low inertia and weak damping”, which can easily lead to transient overvoltage problems at transmitters when high-voltage direct-current (HVDC) latching faults occur. Although a variety of dynamic reactive power optimization strategies have been proposed in the existing research, most of them are aimed at single equipment, and multi-reactive power source collaborative control schemes are lacking. In this paper, we innovatively establish a transient voltage analysis model for a new energy transmitter, derive the expression of overvoltage amplitude, and propose a method for the construction of a multi-reactive source collaborative optimization model, which can effectively suppress transient overvoltage through capacity and initial output configuration. We provide a new idea for the safe operation of a significant percentage of new energy grids. The case analysis shows that the co-optimization method outlined in this paper is an effective solution to suppress the transient overvoltage triggered by AC faults and has wide application value. Full article

The integration of electric vehicles (EVs) into smart grids (SGs) is reshaping both energy systems and mobility infrastructures. This review presents a comprehensive and cross-disciplinary synthesis of current technologies, methodologies, and challenges associated with EV–SG interaction. Unlike prior reviews that address these aspects in isolation, this work uniquely connects three critical pillars: (i) the evolution of energy storage technologies, including lithium-ion, second-life, and hybrid systems; (ii) optimisation and predictive control techniques using artificial intelligence (AI) for real-time energy management and vehicle-to-grid (V2G) coordination; and (iii) cybersecurity risks and post-quantum solutions required to safeguard increasingly decentralised and data-intensive grid environments. The novelty of this review lies in its integrated perspective, highlighting how emerging innovations, such as federated AI models, blockchain-secured V2G transactions, digital twin simulations, and quantum-safe cryptography, are converging to overcome existing limitations in scalability, resilience, and interoperability. Furthermore, we identify underexplored research gaps, such as standardisation of bidirectional communication protocols, regulatory inertia in V2G market participation, and the lack of unified privacy-preserving data architectures. By mapping current advancements and outlining a strategic research roadmap, this article provides a forward-looking foundation for the development of secure, flexible, and grid-responsive EV ecosystems. The findings support policymakers, engineers, and researchers in advancing the technical and regulatory landscape necessary to scale EV–SG integration within sustainable smart cities. Full article

Grid-forming converters (GFMCs) play an increasingly vital role in integrating renewable energy sources into modern power systems. This article reviews GFMCs, emphasizing their importance in enabling reliable, stable, and resilient operation as power systems evolve toward low-inertia, inverter-dominated configurations. Various GFMC topologies are examined based on their suitability for grid-forming functions and performance across different voltage levels. Small-signal modeling approaches are presented to provide deeper insights into system dynamics and converter–grid interactions. The article reviews primary control strategies, including droop control, virtual synchronous machines, and virtual oscillator control, and discusses their impact on synchronization, stability, and power sharing. Finally, the article outlines GFMC applications and challenges, highlighting their impact on system stability. Full article

The increasing integration of renewable energy sources, particularly photovoltaic (PV) systems, into power grids presents challenges in maintaining frequency stability due to the absence of traditional mechanical inertia. This paper proposes a hybrid control strategy combining Particle Swarm Optimization (PSO) and Reinforcement Learning (RL) to provide Adaptive Virtual Inertia Control for frequency stability in multi-microgrid PV systems. The proposed system dynamically adjusts virtual inertia and damping parameters in response to real-time grid conditions and frequency deviations. The PSO algorithm optimizes the base inertia and damping parameters offline, while the RL algorithm fine-tunes these parameters online by learning from the system’s performance. The adaptive control mechanism effectively mitigates frequency fluctuations and enhances grid synchronization, ensuring stable operation even under varying power generation and load conditions. The hybrid PSO–RL controller demonstrates a superior performance, maintaining a frequency close to nominal (50.02 Hz), with the fastest settling time (0.10 s), minimal RoCoF (0.2 Hz/s), and effectively zero steady-state error. Simulation results demonstrate the effectiveness of the hybrid control approach, showing fast and accurate frequency regulation with minimal power quality degradation. The system’s ability to adapt in real time provides a promising solution for next-generation smart grids that rely on renewable energy sources. Full article

Hybrid AC/DC microgrids (HADCMGs), which integrate renewable energy sources and battery storage systems, often face significant stability challenges due to their inherently low inertia and highly variable power inputs. To address these issues, this paper proposes a novel, robust composite controller based on backstepping fast terminal sliding mode control (BFTSMC). This controller is further enhanced with a virtual capacitor to emulate synthetic inertia and with a fractional power-based reaching law, which ensures smooth and finite-time convergence. Moreover, the proposed control strategy ensures the effective coordination of power sharing between AC and DC sub-grids through bidirectional converters, thereby maintaining system stability during rapid fluctuations in load or generation. To achieve optimal control performance under diverse and dynamic operating conditions, the controller gains are adaptively tuned using the marine predators algorithm (MPA), a nature-inspired metaheuristic optimization technique. Furthermore, the stability of the closed-loop system is rigorously established through control Lyapunov function analysis. Extensive simulation results conducted in the MATLAB/Simulink environment demonstrate that the proposed controller significantly outperforms conventional methods by eliminating steady-state error, reducing the settling time by up to 93.9%, and minimizing overshoot and undershoot. In addition, real-time performance is validated via processor-in-the-loop (PIL) testing, thereby confirming the controller’s practical feasibility and effectiveness in enhancing the resilience and efficiency of HADCMG operations. Full article

With the deep integration of electricity and carbon trading markets, distribution networks are facing growing operational stress and a shortage of flexible resources under high penetration of renewable energy. This paper proposes a three-layer coordinated planning model for Source–Grid–Load–Storage (SGLS) systems, considering electricity–carbon coupling and flexibility supply–demand balance. The model incorporates a dynamic pricing mechanism that links carbon pricing and time-of-use electricity tariffs, and integrates multi-source flexible resources—such as wind, photovoltaic (PV), conventional generators, energy storage systems (ESS), and controllable loads—to quantify the system’s flexibility capacity. A hierarchical structure encompassing “decision–planning–operation” is designed to achieve coordinated optimization of resource allocation, cost minimization, and operational efficiency. To improve the model’s computational efficiency and convergence performance, an improved adaptive particle swarm optimization (IAPSO) algorithm is developed which integrates dynamic inertia weight adjustment, adaptive acceleration factors, and Gaussian mutation. Simulation studies conducted on the IEEE 33-bus distribution system demonstrate that the proposed model outperforms conventional approaches in terms of operational economy, carbon emission reduction, system flexibility, and renewable energy accommodation. The approach provides effective support for the coordinated deployment of diverse resources in next-generation power systems. Full article

The large-scale integration of renewable energy and the high penetration of power electronic devices have led to a significant reduction in system inertia and short-circuit capacity. This is particularly manifested in the form of insufficient multiple renewable energy stations short-circuit ratio (MRSCR) and transient overvoltage issues following severe disturbances such as AC and DC faults, which greatly limit the power transfer capability of large renewable energy bases. To effectively mitigate these challenges, this paper proposes an optimal synchronous condenser deployment method tailored for large-scale renewable energy bases. The proposed mathematical model supports a hybrid centralized and distributed configuration of synchronous condensers with various capacities and manufacturers while considering practical engineering constraints such as short-circuit ratio, transient overvoltage, and available bays in renewable energy stations. A practical decomposition and iterative computation strategy is introduced to reduce the computational burden of transient stability simulations. Case studies based on a real-world system verify the effectiveness of the proposed method in determining the optimal configuration of synchronous condensers. The results demonstrate significant improvements in grid strength (MRSCR) and suppression of transient overvoltages, thereby enhancing the stability and transfer capability of renewable energy bases in weak-grid environments. Full article

With the large-scale integration of renewable energy through power electronic inverters,
modern power systems are gradually transitioning to low-inertia systems. Grid-forming
inverters are prone to power overshoot and frequency deviation when facing external
disturbances, threatening system stability. Existing methods face two main challenges in
dealing with complex disturbances: neural-network-based approaches have high computational
burdens and long response times, while traditional linear algorithms lack sufficient
precision in adjustment, leading to inadequate system response accuracy and stability. This
paper proposes an innovative coordinated adaptive control strategy for virtual inertia and
damping. The strategy utilizes a Radial Basis Function neural network for the adaptive
regulation of virtual inertia, while the damping coefficient is adjusted using a linear algorithm.
This approach provides refined inertia regulation while maintaining computational
efficiency, optimizing the rate of change in frequency and frequency deviation. Simulation
results demonstrate that the proposed control strategy significantly outperforms traditional
methods in improving system performance. In the active power reference variation
scenario, frequency overshoot is reduced by 65.4%, active power overshoot decreases by
66.7%, and the system recovery time is shortened. In the load variation scenario, frequency
overshoot is reduced by approximately 3.6%, and the maximum frequency deviation is
reduced by approximately 26.9%. In the composite disturbance scenario, the frequency
peak is reduced by approximately 0.1 Hz, the maximum frequency deviation decreases by
35%, and the power response improves by 23.3%. These results indicate that the proposed
method offers significant advantages in enhancing system dynamic response, frequency
stability, and power overshoot suppression, demonstrating its substantial potential for
practical applications. Full article

The penetration rate of variable energy sources in the current power grid is increasing, with the aim being to expand the use of these energy sources and to replace the traditional black start power supply. This study investigates the black start of a photovoltaic storage joint system based on the system’s short-circuit ratio threshold. Firstly, the principles and control modes of the photovoltaic (PV) system, energy storage system (ESS), and high-voltage direct current (DC) transmission system are studied separately to build an overall model; secondly, computational determinations of the short-circuit ratio under different scenarios are introduced to analyze the strength of the system, and the virtual inertia and virtual damping of the PV system are configured based on this; finally, the change trend of the storage system’s state of charge (SOC) is computed and observed, and the limits of what the system can support in each stage are determined. An electromagnetic transient simulation model of a black start system is constructed in PSCAD/EMTDC, and according to the proposed recovery strategy, the system frequency is maintained in the range of 49.4~50.6 Hz during the entire black start process; the fluctuation in maximum frequency after the recovery of the DC transmission system is no more than 0.1%; and the fluctuation in photovoltaic power at each stage is less than 3%. In addition, all the key indexes meet the requirements for black start technology, which verifies the validity of the strategy and provides theoretical support and a practical reference for the black start of a grid with variable energy sources. Full article

The integration of large-scale wind power clusters significantly reduces the inertia level of the power system, increasing the risk of frequency instability. Accurately assessing the equivalent virtual inertia of wind farms is critical for grid stability. Addressing the dual bottlenecks in existing inertia assessment methods, where physics-based modeling requires full control transparency and data-driven approaches lack interpretability for inertia response analysis, thus failing to reconcile commercial confidentiality constraints with analytical needs, this paper proposes a symbolic regression framework for inertia evaluation in doubly fed wind farms with limited control information constraints. First, a dynamic model for the inertia response of DFIG wind farms is established, and a mathematical expression for the equivalent virtual inertia time constant under different control strategies is derived. Based on this, a nonlinear function library reflecting frequency-active power dynamic is constructed, and a symbolic regression model representing the system’s inertia response characteristics is established by correlating operational data. Then, sparse relaxation optimization is applied to identify unknown parameters, allowing for the quantification of the wind farm’s equivalent virtual inertia. Finally, the effectiveness of the proposed method is validated in an IEEE three-machine nine-bus system containing a doubly fed wind power cluster. Case studies show that the proposed method can fully utilize prior model knowledge and operational data to accurately assess the system’s inertia level with low computational complexity. Full article

Large-scale wind power grid-connected systems can trigger the risk of power system instability. In order to enhance the stability margin of grid-connected systems, this paper accurately characterizes the topology of the global boundary of stability domain (BSD) of the grid-connected system based on BSD theory, using the method of combining the manifold topologies and singularities at infinity. On this basis, the effect of large-scale doubly fed induction generators (DFIGs) replacing synchronous units on the BSD of the system is analyzed. Simulation results based on the IEEE 39-bus system indicate that the negative impedance characteristics and low inertia of DFIGs lead to a contraction of the stability domain. The principle of singularity invariance (PSI) proposed in this paper can effectively expand the BSD by adjusting the inertia and damping, thereby increasing the critical clearing time by about 5.16% and decreasing the dynamic response time by about 6.22% (inertia increases by about 5.56%). PSI is superior and applicable compared to traditional energy functions, and can be used to study the power angle stability of power systems with a high proportion of renewable energy. Full article

Background: To address the uncertainties of renewable energy power generation, the disorderly charging characteristics of electric vehicles, and the high electricity cost of the power grid in expressway service areas, a method of economic dispatch optimization based on the improved particle swarm optimization algorithm is proposed in this study. Methods: Mathematical models of photovoltaic power generation, energy storage systems, and electric vehicles were established, thereby constructing the microgrid system model of the power load in the expressway service area. Taking the economic cost of electricity consumption in the service area as the objective function and simultaneously meeting constraints such as power balance, power grid interactions, and energy storage systems, a microgrid economy dispatch model is constructed. An improved particle swarm optimization algorithm with time-varying parameters of the inertia weight and learning factor was designed to solve the optimal dispatching strategy. The inertia weight was improved by adopting the Gaussian decreasing method, and the asymmetric dynamic learning factor was adjusted simultaneously. Findings: Field case studies demonstrate that, compared to other algorithms, the improved Particle Swarm Optimization algorithm effectively reduces the operational costs of microgrid systems while exhibiting accelerated convergence speed and enhanced robustness. Value: This study provides a theoretical mathematical reference for the economic dispatch optimization of microgrids in renewable-integrated transportation systems. Full article

Island electrical networks often face stability and resilience issues due to their weakly meshed structure, which lowers system inertia and compromises supply continuity. This challenge is further intensified by the increasing integration of renewable energy sources, promoted by decarbonization goals, whose intermittent and variable nature complicates grid stability management. To address this, Red Eléctrica de España—the transmission system operator of Spain—has planned several improvements in the Canary Islands, including the installation of new wind farms and a second transmission circuit on the island of La Palma. This new infrastructure will complement the existing one and ensure system stability in the event of N-1 contingencies. This article evaluates the stability of the island’s electrical network through dynamic simulations conducted in PSS^®E, analyzing four distinct fault scenarios across three different grid configurations (current, short-term upgrade and long-term upgrade with wind integration). Generator models are based on standard dynamic parameters (WECC) and calibrated load factors using real data from the day of peak demand in 2021. Results confirm that the planned developments ensure stable system operation under severe contingencies, while the integration of wind power leads to a 33% reduction in diesel generation, contributing to improved environmental and operational performance. Full article

The integration of renewable energy sources (RESs) into power systems, particularly in microgrids, is becoming a prominent trend aimed at reducing dependence on traditional energy sources. Replacing conventional synchronous generators with grid-connected RESs through power electronic converters has significantly reduced the inertia of microgrids. This reduction negatively impacts the dynamics and operational performance of microgrids when confronted with uncertainties, posing challenges to frequency and voltage stability, especially in a standalone operating mode. To address this issue, this research proposes enhancing microgrid stability through frequency control based on virtual inertia (VI). Additionally, the Iterative Learning Control (ILC) method is employed, leveraging iterative learning strategies to improve the quality of output response control. Accordingly, the ILC-VI control method is introduced, integrating the iterative learning mechanism into the virtual inertia controller to simultaneously enhance the system’s inertia and damping coefficient, thereby improving frequency stability under varying operating conditions. The effectiveness of the ILC-VI method is evaluated in comparison with the conventional VI (C-VI) control method through simulations conducted on the MATLAB/Simulink platform. Simulation results demonstrate that the ILC-VI method significantly reduces the frequency nadir, the rate of change of frequency (RoCoF), and steady-state error across iterations, while also enhancing the system’s robustness against substantial variations from renewable energy sources. Furthermore, this study analyzes the effects of varying virtual inertia values, shedding light on their role in influencing response quality and convergence speed. This research underscores the potential of the ILC-VI control method in providing effective support for low-inertia microgrids. Full article