Search Results (4,543)

The Southern Ocean Clouds, Radiation, Aerosol Transport Experimental Study (SOCRATES) was an aircraft-based campaign (15 January–26 February 2018) that deployed in situ probes and remote sensors to investigate low-level clouds over the Southern Ocean (SO). A novel methodology was developed to identify cloud boundaries and classify cloud phases in single-layer, low-level marine boundary layer (MBL) clouds below 3 km using the HIAPER Cloud Radar (HCR) and in situ measurements. The cloud base and top heights derived from HCR reflectivity, Doppler velocity, and spectrum width measurements agreed well with corresponding lidar-based and in situ estimates of cloud boundaries, with mean differences below 100 m. A liquid water content–reflectivity (LWC-Z) relationship, LWC = 0.70Z^0.29, was derived to retrieve the LWC and liquid water path (LWP) from HCR profiles. The cloud phase was classified using HCR measurements, temperature, and LWP, yielding 40.6% liquid, 18.3% mixed-phase, and 5.1% ice samples, along with drizzle (29.1%), rain (3.2%), and snow (3.7%) for drizzling cloud cases. The classification algorithm demonstrates good consistency with established methods. This study provides a framework for the boundary and phase detection of MBL clouds, offering insights into SO cloud microphysics and supporting future efforts in satellite retrievals and climate model evaluation. Full article

Oil-spill booms in shallow waters and high tidal amplitudes could ground on the seabed and retain high amounts of seawater. The object of this study is to estimate the mooring force at both boom section ends and the occurrence of submarining observed along the crest line. We use a Lagrangian linear elastic membrane theory incorporating the non-linear Green strain tensor and a non-updated hydrostatic or hydrodynamic load. We describe a numerical method using geometrically non-linear finite elements and 2D vertical hydrostatic pressure estimation. The calculated results indicate the role of hydrostatic pressure caused by the water height difference—several centimeters at the mid-section—and the influence of the elasticity module. We consolidate the mooring force results by supposing 2D horizontal hydrodynamic pressure. We associate the current velocity that produces the same mooring force with that generated by the hydrostatic load. The associated Froude number is close to 0.8. Full article

The increasing frequency and intensity of wildfires pose severe risks to ecosystems, infrastructure, and human safety. In wildland–urban interface (WUI) areas, nearby vegetation strongly influences building ignition risk through flame contact and radiant heat exposure. However, limited research has leveraged Unmanned Aerial Systems (UAS) remote sensing (RS) to capture species-specific vegetation geometry and predict thermal responses during ignition events This study proposes a two-stage framework integrating UAS-based multispectral (MS) imagery, LiDAR data, and Fire Dynamics Simulator (FDS) modeling to estimate the maximum temperature (T) and heat flux (HF) of outdoor vegetation, focusing on Syzygium smithii (Lilly Pilly). The study data was collected at a plant nursery at Queensland, Australia. A total of 72 commercially available outdoor vegetation samples were classified into 11 classes based on pixel counts. In the first stage, ensemble learning and watershed segmentation were employed to segment target vegetation patches. Vegetation UAS-LiDAR point cloud delineation was performed using Raycloudtools, then projected onto a 2D raster to generate instance ID maps. The delineated point clouds associated with the target vegetation were filtered using georeferenced vegetation patches. In the second stage, cone-shaped synthetic models of Lilly Pilly were simulated in FDS, and the resulting data from the sensor grid placed near the vegetation in the simulation environment were used to train an XGBoost model to predict T and HF based on vegetation height (H) and crown diameter (D). The point cloud delineation successfully extracted all Lilly Pilly vegetation within the test region. The thermal response prediction model demonstrated high accuracy, achieving an RMSE of 0.0547 °C and R² of 0.9971 for T, and an RMSE of 0.1372 kW/m² with an R² of 0.9933 for HF. This study demonstrates the framework’s feasibility using a single vegetation species under controlled ignition simulation conditions and establishes a scalable foundation for extending its applicability to diverse vegetation types and environmental conditions. Full article

This paper establishes the Brain Booster Buildings framework, the first model to demonstrate how daily stair use can elevate brain-derived neurotrophic factor (BDNF), a vital molecule for lifelong neurogenesis and brain health in humans. Through a novel framework of the associations between metabolic equivalents (METs) data and BDNF response studies, we establish that stairs are generally higher in METs than any indoor activity. We further explain how architectural parameters (riser height, floor number, pace) predictably modulate exercise intensity during stair use. We identify two implementable patterns: moderate-intensity continuous use (≥20 min, 1–3 floors) and high-intensity interval training (6 min, carrying loads while using stairs in a building with three floors or less, or using stairs in a building with ≥3 floors, load-free). Based on BDNF responses to comparable exercise intensities, 6 min of high-intensity stair climbing is predicted to increase serum BDNF by up to 40%. Since people spend ~90% of their time indoors while neurogenesis declines fourfold throughout the adult lifespan, affecting mood, stress resilience, and memory, vertical architecture emerges as a vital, accessible, and cost-effective infrastructure that boosts BDNF for neurogenesis, plasticity, and brain health. We conducted scenario-based modelling using the Brain Booster Buildings framework to estimate how the use of stairs in residential, office, educational, hospital, and commercial buildings may boost BDNF levels based on established intensity–BDNF relationships. The framework provides architects, policymakers, and clinicians with evidence-based estimated specifications to use buildings as daily brain boosters. Full article

Tailings dams are unique structures due to the materials they store and the methods applied in their construction, often resulting in complex three-dimensional (3D) problems. Most current slope-stability analyses neglect the 3D effects without significant consequences. However, certain conditions, such as the valley shape, the spatial variability of the tailings’ resistance, and the presence of internal dikes, may render the 2D simplification inadequate. For translational slides, the sliding-mass width-to-height ratio (W/H) is a reliable estimator of the 3D effects. However, it is unclear whether this geometric ratio is the most suitable for rotational slides, where the width of the sliding mass varies along its height. This paper presents a parametric study of the 3D effects of the dam’s height (H_M) and the valley shape, namely the abutments’ slope angle with the horizontal (β) and the thalweg width (L_M), on the overall stability of a tailings dam raised by the upstream method, by means of 2D and 3D Limit Equilibrium (LE) analyses. The study evaluates the dam stability using a straightforward and practical methodology, specifically the FS_3D to FS_2D ratio (R_3D/2D), to compare the results of the 3D and 2D analyses, adapting current state-of-the-art techniques originally for translational slides, focused on pre-defined, closed-form slip-surface geometry, to rotational ones where the main focus is the geometry of the whole structure as a physical constraint for the sliding mass. The results show that the model average width-to-height ratio (W_M,avr/H_M), developed in this study, may be a better estimator of the 3D effects for rotational slides than the W/H ratio. Full article

Monitoring reclaimed wellsites in boreal forest environments requires accurate, scalable, and repeatable methods for assessing vegetation recovery. This study evaluates the use of uncrewed aerial vehicle (UAV)-based light detection and ranging (LiDAR) and multispectral (MS) imagery for individual tree detection, crown delineation, and classification across five reclaimed wellsites in Alberta, Canada. A deep learning workflow using 3D convolutional neural networks was applied to LiDAR and MS data collected in spring, summer, and autumn. Results show that LiDAR alone provided high accuracy for tree segmentation and height estimation, with a mean intersection over union (mIoU) of 0.94 for vegetation filtering and an F1-score of 0.82 for treetop detection. Incorporating MS data improved deciduous/coniferous classification, with the highest accuracy (mIoU = 0.88) achieved using all five spectral bands. Coniferous species were classified more accurately than deciduous species, and classification performance declined for trees shorter than 2 m. Spring conditions yielded the highest classification accuracy (mIoU = 0.93). Comparisons with ground measurements confirmed a strong correlation for tree height estimation (R² = 0.95; root mean square error = 0.40 m). Limitations of this technique included lower performance for short, multi-stemmed trees and deciduous species, particularly willow. This study demonstrates the value of integrating 3D structural and spectral data for monitoring forest recovery and supports the use of UAV remote sensing for scalable post-disturbance vegetation assessment. The trained models used in this study are publicly available through the TreeAIBox plugin to support further research and operational applications. Full article

Hurricane Maria crossed Puerto Rico with winds as high as 250 km/h, resulting in widespread damages and loss of weather station data, thus limiting direct weather measurements of wind variability. Here, we identified more than 155 million trees to estimate the distribution of wind speed over 9000 km² of land from island-wide LiDAR point clouds collected before and after the hurricane. The point clouds were classified and rasterized into the canopy height model to perform individual tree identification and perform change detection analysis. Individual trees’ stem diameter at breast height were estimated using a function between delineated crown and extracted canopy height, validated using the records from Puerto Rico’s Forest Inventory 2003. The results indicate that approximately 35.7% of trees broke at the stem (below the canopy center) and 28.5% above the canopy center. Furthermore, we back-calculated the critical wind speed, or the minimum speed to cause breakage, at individual tree level this was performed by applying a mechanical model using the estimated diameter at breast height, the extrapolated breakage height, and pre-Hurricane Maria canopy height. Individual trees were then aggregated at 115 km² cells to summarize the critical wind speed distribution of each cell, based on the percentage of stem breakage. A vertical wind profile analysis was then applied to derive the hurricane wind distribution using the mean hourly wind speed 10 m above the canopy center. The estimated wind speed ranges from 250 km/h in the southeast at the landfall to 100 km/h in the southwest parts of the islands. Comparison of the modeled wind speed with the wind gust readings at the few remaining NOAA stations support the use of tree breakages to model the distribution of hurricane wind speed when ground readings are sparse. Full article

Background/Objectives: This study aimed at evaluating the association between maternal pre-pregnancy glycemic status and growth delay in offspring using nationwide health screening data. Methods: A retrospective cohort of 258,367 mother–child dyads born between 2014 and 2021 was analyzed. Maternal glycemic status was categorized as normal (<100 mg/dL), impaired fasting glucose (IFG, 100–125 mg/dL), or diabetes mellitus (DM, ≥126 mg/dL). Growth delay was defined as measurements below the 10th percentile of height, weight, and head circumference at 18–24 and 30–36 months. Visual and auditory development were assessed using caregiver questionnaires. Inverse probability of treatment weighting was applied, and weighted relative risks (RRs) were estimated. Results: The prevalence of growth delay was 3.5% for height, 3.8% for weight, and 4.3% for head circumference; visual and auditory problems were reported in 1.2% and 8.2% of children, respectively. Both the DM (1.2%) and IFG (9.3%) groups showed increased risks of growth delay across both age periods. Maternal hyperglycemia was also associated with offspring’s visual and auditory development, with age- and period-specific differences observed. Conclusions: Maternal pre-pregnancy glycemic status was significantly associated with delayed growth in Korean children aged 18–36 months. These findings highlight the importance of optimizing maternal glycemic control prior to pregnancy for favorable child developmental outcomes. Full article

Accurate estimation of the forest canopy height is crucial in monitoring the global carbon cycle and evaluating progress toward carbon neutrality goals. The Global Ecosystem Dynamics Investigation (GEDI) mission provides an important data source for canopy height estimation at a global scale. However, the non-zero half-width of the transmitted laser pulses (NHWTLP) and the influence of terrain slope can cause waveform broadening and overlap between canopy returns and ground returns in GEDI waveforms, thereby reducing the estimation accuracy. To address these limitations, we propose a canopy height retrieval method that combines the deconvolution of GEDI’s transmitted waveforms with terrain slope constraints on the ground response function. The method consists of two main components. The first is performing deconvolution on GEDI’s effective return waveforms using their corresponding transmitted waveforms to obtain the true ground response function within each GEDI footprint, thereby mitigating waveform broadening and overlap induced by NHWTLP. This process includes constructing a convolution convergence function for GEDI waveforms, denoising GEDI waveform data, transforming one-dimensional ground response functions into two dimensions, and applying amplitude difference regularization between the convolved and observed waveforms. The second is incorporating terrain slope parameters derived from a digital terrain model (DTM) as constraints in the canopy height estimation model to alleviate waveform broadening and overlap in ground response functions caused by topographic effects. The proposed approach enhances the precision of forest canopy height estimation from GEDI data, particularly in areas with complex terrain. The results demonstrate that, under various conditions—including GEDI full-power beams and coverage beams, different terrain slopes, varying canopy closures, and multiple study areas—the retrieved height (rh) model constructed from ground response functions derived via the inverse deconvolution of the transmitted waveforms (IDTW) outperforms the RH (the official height from GEDI L2A) model constructed using RH parameters from GEDI L2A data files in forest canopy height estimation. Specifically, without incorporating terrain slope, the rh model for canopy height estimation using full-power beams achieved a coefficient of determination (R²) of 0.58 and a root mean square error (RMSE) of 5.23 m, compared to the RH model, which had an R² of 0.58 and an RMSE of 5.54 m. After incorporating terrain slope, the rh_g model for full-power beams in canopy height estimation yielded an R² of 0.61 and an RMSE of 5.21 m, while the RH_g model attained an R² of 0.60 and an RMSE of 5.45 m. These findings indicate that the proposed method effectively mitigates waveform broadening and overlap in GEDI waveforms, thereby enhancing the precision of forest canopy height estimation, particularly in areas with complex terrain. This approach provides robust technical support for global-scale forest resource assessment and contributes to the accurate monitoring of carbon dynamics. Full article

National-scale long-term forest ecosystem surveys based on systematic sampling offer a robust framework for detecting temporal growth trends of specific tree species across regions. The National Forest Inventory (NFI) of the Republic of Korea serves as a vital source for analyzing long-term forest dynamics on a national scale by providing regularly collected large-scale forest data. However, various limitations, such as the lack of individual-level and spatial interaction data, restrict the development of reliable individual tree growth models. To overcome this, distance-independent models, compatible with the structure and data resolution of the NFI, provide a practical alternative for simulating individual tree and stand-level growth by utilizing straightforward attributes, such as diameter at breast height (DBH). This study aimed to analyze the growth patterns and construct species-specific models for two major plantation species in South Korea, Pinus koraiensis and Larix kaempferi, using data from the 5th (2006–2010), 6th (2011–2015), and 7th (2016–2020) NFI survey cycles. The sampling points included 117 and 171 plots for P. koraiensis and L. kaempferi, respectively. An additional matching process was implemented to improve species identification and tracking across multiple survey years. The final models were parameterized using a distance-independent model, integrating the estimation of potential diameter growth (PG) and a modifier (MOD) function to adjust for species- and site-specific variabilities. Consequently, the models for each species demonstrated strong performance, with P. koraiensis showing an R² of 0.98 and RMSE of 1.15 (cm), and L. kaempferi showing an R² of 0.98 and RMSE of 1.14 (cm). This study provides empirical evidence for the development of generalized and scalable growth models using NFI data. As the NFI increases in volume, the framework can be expanded to underrepresented species to improve the accuracy of underperforming models. Ultimately, this study lays a scientific foundation for the future development of tree-level simulation algorithms for forest dynamics, encompassing mortality, harvesting, and regeneration. Full article

Background/Objectives: The Jiangnan diet—a traditional dietary pattern prevalent in Eastern China—is a newly proposed dietary pattern. This study provides additional epidemiological evidence for the promotion of the Jiangnan diet through examining the association between the Jiangnan diet and mild cognitive impairment (MCI). Methods: A multicenter cross-sectional study was carried out during 2020 among 1084 community-dwelling adults aged 55 years and above across multiple sites in Zhejiang Province, China. Data collection encompassed basic information of the population, cognition (using the Montreal Cognitive Assessment), dietary intake information (using the Food Frequency Questionnaire, FFQ), life pattern, depressive symptoms (using the Mental Health Assessment Scale for the Elderly), and physical examinations (e.g., height, weight). The dietary patterns were assessed using a validated semi-quantitative FFQ. Factor analysis was used to analyze the 16 categories of food intake of the participants, and dietary patterns and the “Jiangnan diet” were extracted. The Jiangnan diet scores were categorized into quartiles: Q1 (lowest) to Q4 (highest). Multivariate logistic regression was employed to examine the association between adherence to the Jiangnan diet and the prevalence of MCI, with results expressed as odds ratios (OR) and 95% confidence intervals (CI). Results: The estimated prevalence of MCI in the study population was 24.6%. The dietary pattern characterized by whole grains, low salt, and low oil was identified as the “Jiangnan diet”. Participants with the highest adherence to the “Jiangnan diet” pattern had 79.2% lower odds of MCI than those with the lowest adherence (odds ratio = 0.208, 95% CI = 0.120~0.362, p < 0.0001) after adjusting for age, frequency of social activities, depression, hypertension, alcohol consumption, and energy intake. Conclusions: High adherence to the Jiangnan diet was associated with lower odds of MCI. To further verify the relationship between the Jiangnan diet and MCI, future studies will focus on longitudinal research exploring different dietary patterns and disease outcomes across various regions. Full article

Conventional ridging and mulching machines struggle to perform effectively in yellow sand substrates due to their loose texture, high collapsibility, and strong fluidity, which compromise ridge stability and operational quality. To address these challenges, this study proposes the development of an integrated rotary tillage, ridging, and film-mulching machine specifically designed to meet the agronomic requirements of tomato cultivation in greenhouse environments with yellow sand substrate. Based on theoretical analysis and parameter calculations, a soil transportation model was established, and the key structural parameters—such as blade arrangement and helical shaft geometry—were determined. A discrete element method (DEM) simulation was employed to construct a contact model for the yellow sand–slag mixed substrate. A combination of single-factor experiments and Box–Behnken response surface methodology was used to investigate the effects of forward speed, shaft rotational speed, and tillage depth on ridge stability and operational performance. The simulation results indicated that a forward speed of 0.82 m·s⁻¹, shaft speed of 260 rpm, and tillage depth of 150 mm yielded the highest ridge stability, with an average of 95.7%. Field trials demonstrated that the ridge top width, base width, height, and spacing were 598.6 mm, 802.3 mm, 202.4 mm, and 1002.8 mm, respectively, with an average ridge stability of 94.3%, differing by only 1.4 percentage points from the simulated results. However, a quantitative traction/energy comparison with conventional equipment was not collected in this study, and we report this as a limitation. The energy consumption is estimated based on power usage and effective field capacity (EFC) under similar operating conditions. Soil firmness reached 152.1 kPa, fully satisfying the agronomic requirements for tomato cultivation. The proposed machine significantly improves operational adaptability and ridge stability in yellow sand substrate conditions, providing robust equipment support for efficient greenhouse farming. Full article

Accurate quantification of campus vegetation carbon stocks is essential for advancing carbon neutrality goals and refining urban carbon management strategies. This study pioneers the integration of drone and backpack LiDAR data to overcome limitations in conventional carbon estimation approaches. The Comparative Shortest-Path (CSP) algorithm was originally developed to segment tree crowns from point cloud data, with its design informed by metabolic ecology theory—specifically, that vascular plants tend to minimize the transport distance to their roots. In this study, we deployed the Comparative Shortest-Path (CSP) algorithm for individual tree recognition across 897 campus trees, achieving 88.52% recall, 72.45% precision, and 79.68% F-score—with 100% accuracy for eight dominant species. Diameter at breast height (DBH) was extracted via least-squares circle fitting, attaining >95% accuracy for key species such as Magnolia grandiflora and Triadica sebifera. Carbon storage was calculated through species-specific allometric models integrated with field inventory data, revealing a total stock of 163,601 kg (mean 182.4 kg/tree). Four dominant species—Cinnamomum camphora, Liriodendron chinense, Salix babylonica, and Metasequoia glyptostroboides—collectively contributed 84.3% of total storage. As the first integrated application of multi-platform LiDAR for campus-scale carbon mapping, this work establishes a replicable framework for precision urban carbon sink assessment, supporting data-driven campus greening strategies and climate action planning. Full article

Urban roof segmentation plays a pivotal role in applications such as urban planning, infrastructure management, and renewable energy deployment. This study explores the evolution of deep learning techniques from traditional Convolutional Neural Networks (CNNs) to cutting-edge transformer-based models in the context of roof segmentation from satellite imagery. We highlight the limitations of conventional methods when applied to urban environments, including resolution constraints and the complexity of roof structures. To address these challenges, we evaluate two advanced deep learning models, Mask R-CNN and MaskFormer, which have shown significant promise in accurately segmenting roofs, even in dense urban settings with diverse roof geometries. These models, especially the one based on transformers, offer improved segmentation accuracy by capturing both global and local image features, enhancing their performance in tasks where fine detail and contextual awareness are critical. A case study on Ben Guerir City in Morocco, an urban area experiencing rapid development, serves as the foundation for testing these models. Using high-resolution satellite imagery, the segmentation results offer a deeper understanding of the accuracy and effectiveness of these models, particularly in optimizing urban planning and renewable energy assessments. Quantitative metrics such as Intersection over Union (IoU), precision, recall, and F1-score are used to benchmark model performance. Mask R-CNN achieved a mean IoU of 74.6%, precision of 81.3%, recall of 78.9%, and F1-score of 80.1%, while MaskFormer reached a mean IoU of 79.8%, precision of 85.6%, recall of 82.7%, and F1-score of 84.1% (pixel-level, micro-averaged at IoU = 0.50 on the held-out test set), highlighting the transformative potential of transformer-based architectures for scalable and precise urban imaging. The study also outlines future work in 3D modeling and height estimation, positioning these advancements as critical tools for sustainable urban development. Full article

Aim: This study analyzed the concurrent validity of the Optojump infrared photocell system for estimating lower limb peak power by comparing it with the 15 s Wingate anaerobic test (WAnT) and examining relationships with sprint performance indicators. Methods: Twelve physically active university students (ten males, two females; age: 23.39 ± 1.47 years; body mass: 73.08 ± 9.19 kg; height: 173.67 ± 6.97 cm; BMI: 24.17 ± 1.48 kg·m⁻²) completed a cross-sectional validation protocol. Participants performed WAnT on a calibrated Monark ergometer (7.5% body weight for males, 5.5% for females), 30 s continuous jump tests using the Optojump system (Microgate, Italy), and 30 m sprint assessments with 10 m and 20 m split times. Peak power was expressed in absolute (W), relative (W·kg⁻¹), and allometric (W·kg^−0.67) terms. Results: Thirty-second continuous jump testing produced systematically higher peak power values across all metrics (p < 0.001). Mean differences indicated large effect sizes: relative power (Cohen’s d = 0.99; 18.263 ± 4.243 vs. 10.99 ± 1.58 W·kg⁻¹), absolute power (d = 0.86; 1381.71 ± 393.44 vs. 807.28 ± 175.45 W), and allometric power (d = 0.79). Strong correlations emerged between protocols, with absolute power showing the strongest association (r = 0.842, p < 0.001). Linear regression analysis revealed that 30 s continuous jump-derived measurements explained 71% of the variance in Wingate outcomes (R² = 0.710, p < 0.001). Sprint performance showed equivalent predictive capacity for both tests (Wingate: R² = 0.66; 30 s continuous jump: R² = 0.67). Conclusions: The Optojump infrared photocell system provides a valid and practical alternative to laboratory-based ergometry for assessing lower limb anaerobic power. While it systematically overestimates absolute values compared with the Wingate anaerobic test, its strong concurrent validity (r > 0.80), large effect sizes, and equivalent predictive ability for sprint performance (R² = 0.66–0.71) confirm its reliability as a field-based assessment tool. These findings underscore the importance of sport-specific, weight-bearing assessment technologies in modern sports biomechanics, providing coaches, practitioners, and clinicians with a feasible method for monitoring performance, talent identification, and training optimization. The results further suggest that Optojump-based protocols can bridge the gap between laboratory precision and ecological validity, supporting both athletic performance enhancement and injury prevention strategies. Full article