Search Results (7)

The work is devoted to the study of the influence of synthesis conditions on the properties of water-insoluble rubidium salts of phosphotungstic acid (PTA). Such heteropoly compounds have a wide range of applications, including in the field of electrocatalysts and solid electrolytes for various electrochemical devices. The acid salts of PTA with high activity of acid sites on the particle surface are of particular interest. It is known that the properties of water-insoluble PTA salts strongly depend on synthesis conditions, such as the ratio of reagents, temperature, concentrations, and other parameters. The work examines the influence of the ratio and concentration of reagents on the sizes of crystallites and agglomerates, specific surface area (SSA), porosity, water content, and ionic conductivity of the synthesized PTA salts. The SSA value of the obtained samples varied in the range of 84–123 m² g⁻¹, and the ionic conductivity was 13–90 mS cm⁻¹ at room temperature and 75% RH. An increase in the acid concentration and the degree of proton substitution led to an increase in SSA, accompanied by an increase in particle sizes without changing the size of crystallites. The results of the work may be useful for the development of new materials based on the obtained salts in many fields, including hydrogen energy. Full article

Keggin heteropolyacids (HPAs) are metal–oxygen clusters with strong Bronsted acidity. The conversion of HPAs to metal salts can result in Lewis acidity, improving their performance in oxidation reactions. In this review, the main routes for the synthesis of Keggin-type heteropolyacids salts, as well their use as catalysts in oxidation processes of a plethora of substrates, such as monoterpenes, olefins, aldehydes, terpene alcohols, and aromatics, are described. Green reactants such as hydrogen peroxide and molecular oxygen are used as oxidants. These reactions are of interest to several industries because they can be used to produce drugs, additives, fragrances, and fine chemicals. The high efficiency of Keggin HPA with green oxidants contributes to a reduction in the environmental impact of these processes, as preconize the principles of green chemistry. Moreover, Keggin HPAs can be converted to bifunctional catalysts by the modification of their structure, total or partial replacement of their protons with Lewis acid metal cations, or the introduction of these cations into the Keggin anion structure, replacing the addenda atoms (i.e., W and Mo). Aspects linked to the synthesis and characterization of these catalysts are discussed herein, with emphasis on infrared spectroscopy and powder XRD patterns. The most recent advances achieved in the development of catalytic oxidation systems based on Keggin HPA salts are also addressed. Full article

Keggin-type heteropolyacid cesium salts have been regarded as potential candidates for heterogeneous catalytic reactions. This review describes the success of Keggin-type heteropolyacids cesium salts (Cs-HPA salts) as efficient catalysts in various synthesis processes. The Cs-HPA catalysts can be synthesized as solid salts through the metathesis of a solution containing precursor HPA and another solution containing soluble Cs salt, which will give Cs-HPA salt as a solid precipitate. Alternatively, they can be also obtained from the commercial precursor HPA. In this review, all the routes to prepare the different cesium salts (i.e., saturated, lacunar, metal-doped) were described. These salts can be used in acid-catalyzed reactions (i.e., esterification, etherification, acetalization, dehydration) or oxidative transformations (oxidative esterification, oxidation, epoxidation). All of these reactions were addressed herein. Aspects related to the synthesis and characterization of these catalyst salts were discussed. This review aims to discuss the most pertinent heterogeneous catalytic systems based on Keggin HPA Cs salts. The focus was to correlate the physicochemical properties of these salts with their catalytic activity. Ultimately, the most recent advances achieved in the applications of these Cs-HPA salts as catalysts in the synthesis of industrial interest compounds were discussed. Cesium heteropoly salts are an alternative to the traditional soluble mineral acids as well as to solid-supported catalysts. Full article

Fossil additives are a primary energy source and their contribution is around 80% in the world. Therefore, bioadditives that reduce their impact are each very important. This article discusses the chemical transformation of glycerol to carbonate, ethers, esters, ketals, and acetals, compounds with high technological applications, especially in the fuel sector as bioadditives. Mainly, heterogeneous catalysts are important in the production of more than 80% of chemicals in the word. The focus is on demonstrating how the Keggin heteropolyacids (HPAs) are efficient catalysts in the reactions of syntheses of glycerol-derived bioadditives, either in homogeneous or heterogeneous phases. Although solid, HPAs have a low surface area and are soluble in polar solvents, hampering their use as heterogeneous catalysts. Alternatively, they have been successfully used supported on solid matrixes with a high surface area. Another option is converting the Keggin HPAs to insoluble salts simply by exchanging their protons with large cations like potassium, cesium, or ammonium-derivatives. Therefore, solid heteropoly salts have reduced the cost and the environmental impact of bioadditive synthesis processes, being an alternative to traditional mineral acids or solid-supported catalysts. This review describes the most recent advances achieved in the processes of synthesis of glycerol-derived bioadditives over solid-supported HPAs or their solid heteropoly salts. Full article

Bifunctional solid acidic quaternary ammonium salts of Keggin-type vanadium-containing heteropoly acids, such as R_3.5H_0.5PVMo₁₁O₄₀ (R: (C₂H₅)₄N, (C₄H₉)₄N, (C₆H₁₃)₄N), and [(C₄H₉)₄N]_4.5H_0.5SiW₁₁VO₄₀, are capable of one-pot hydrolysis-oxidationconversion (OxFA-processing) of starch to biogenic formic acid. The impact of the reaction conditions and catalyst type was revealed. The highest formic acid yield of 50% was achieved over the best [(C₂H₅)₄N]_3.5H_0.5PVMo₁₁O₄₀ catalyst, which was active and stable in seven reaction cycles. The kinetic computational model, which described formic acid formation well, was proposed in the presence of the most active [(C₂H₅)₄N]_3.5H_0.5PVMo₁₁O₄₀ catalyst. Full article

Thermogravimetric analysis (TGA) was used to evaluate the thermal stability and the amount of coke deposition resulting from the deactivation of catalysts during ethanol dehydration reaction in a fixed bed continuous flow reactor. In this study, a series of catalysts containing 30% of Pd doped and pure 12-tungstophosphoric acid and its insoluble Cs_2.5H_0.5PW₁₂O₄₀ salt supported on SBA-15 were prepared. The catalytic efficiency of ethanol dehydration reaction was also evaluated. Two types of coke are identified from the TPO (Temperature programmed oxidation) profiles and assigned to the coke precursor and hard coke, respectively. The results indicate that cesium salts reduced the formation of hard coke. The amount of total coke formed was significantly reduced by supporting the catalysts on mesoporous SBA-15 molecular sieves. Full article

The cobalt, manganese, and iron salts of tungstophosphoric or molybdophosphoric acid with growing content of metals were applied for the first time as catalysts in the Baeyer-Villiger (BV) oxidation of cyclohexanone to ε-caprolactone with molecular oxygen. The catalysts were characterized with Fourier transform infrared spectroscopy (FTIR), X-ray fluorescence (XRF), and ethanol decomposition reaction. Introduction of transition metals into the heteropoly structure increases the activity of resulting heteropoly salts in comparison with parent heteropolyacids. It was shown that the most active catalysts are salts of the heteropoly salts with one metal atom introduced and one proton left (HMPX) type, (where M = Co, Fe, Mn, and X = W, Mo) with the metal to proton ratio equal one. Among all of the studied catalysts, the highest catalytic activity was observed for HCoPW. The effect indicates that both the acidic and redox properties are required to achieve the best performance. The Baeyer-Villiger (BV) oxidation mechanism proposed identifies the participation of heteropoly compounds in three steps of the investigated reaction: oxidation of aldehyde to peracid (redox function), activation of carbonyl group (Lewis acidity), and decomposition of the Criegee adduct to ε-caprolactone (Brønsted acidity). Full article