Search Results (9)

Mid-infrared (MIR) spectroscopy enables non-invasive identification of chemical species by probing absorption spectra associated with molecular vibrational modes, where spectral filters play a central role. Conventional plasmonic metasurfaces have been explored for MIR filtering in reflection and transmission modes but typically suffer from broad spectral profiles and low efficiencies. All-dielectric metasurfaces, although characterized by low intrinsic losses, are largely limited to reflection mode operation. To overcome these limitations, we propose a hybrid metal-dielectric metasurface that combines the advantages of both platforms while simplifying fabrication compared to conventional Fabry–Pérot filters. The proposed filter consists of silicon (Si) crosses atop gold (Au) square patches and demonstrates a transmission efficiency of 87% at the operating wavelength of 4.28 µm, with a full width half maximum (FWHM) as narrow as 43 nm and a quality factor of approximately 99.5 at λ = 4.28 μm. Numerical simulations attribute this performance to hybridization of Mie lattice resonances in both the gold patches and silicon crosses. By providing narrowband, high-transmission filtering in the MIR, the hybrid metasurface offers a compact and versatile platform for selective gas detection and imaging. This work establishes hybrid metal–dielectric metasurfaces as a promising direction for next-generation MIR spectroscopy. Full article

A giant electric field on a subwavelength scale is highly beneficial for boosting the light–matter interaction. In this paper, we investigated a hybrid structure consisting of a hemispheric dimer array and a gold film and realized resonant mode coupling of the surface lattice resonance (SLR) and surface plasmon polariton (SPP). Mode coupling is demonstrated by observing anti-crossing in reflection spectra, which corresponds to Rabi splitting. Although the resonance coupling does not enter the strong coupling regime, an improved quality factor (Q~350) and stronger electric field enhancement in the gap region of the dimer (i.e., hot spot) in our hybrid structure are obtained compared to those of the single dimer or dimer array only. Remarkably, the magnitude of electric field enhancement over 500 can be accessible. Such high field enhancement makes our hybridized structure a versatile platform for the realization of ultra-sensitive biosensing, low-threshold nanolasing, low-power nonlinear optical devices, etc. Full article

In this study we investigate the optical properties of a 2D-gap surface plasmon metasurface composed of gold nanoblocks (nanoantennas) arranged in a metal–dielectric configuration. This novel structure demonstrates the capability of generating simultaneous multi-plasmonic resonances and offers tunability within the near-infrared domain. Through finite difference time domain (FDTD) simulations, we analyze the metasurface’s reflectance spectra for various lattice periods and identify two distinct dips with near-zero reflectance, indicative of resonant modes. Notably, the broader dip at 1150 nm exhibits consistent behavior across all lattice periodicities, attributed to a Fano-type hybridization mechanism originating from the overlap between localized surface plasmons (LSPs) of metallic nanoblocks and surface plasmon polaritons (SPPs) of the underlying metal layer. Additionally, we investigate the influence of dielectric gap thickness on the gap surface plasmon resonance and observe a blue shift for smaller gaps and a spectral red shift for gaps larger than 100 nm. The dispersion analysis of resonance wavelengths reveals an anticrossing region, indicating the hybridization of localized and propagating modes at wavelengths around 1080 nm with similar periodicities. The simplicity and tunability of our metasurface design hold promise for compact optical platforms based on reflection mode operation. Potential applications include multi-channel biosensors, second-harmonic generation, and multi-wavelength surface-enhanced spectroscopy. Full article

The effects of resonance interaction of plasmonic and photonic modes in hybrid metal-dielectric structures with square Al nanodisk lattices coupled with a Si waveguide layer were investigated using micro-photoluminescence (micro-PL) spectroscopy. As radiation sources, GeSi quantum dots were embedded in the waveguide. A set of narrow PL peaks superimposed on the broad bands were observed in the range of quantum dot emissions. At optimal parameters of Al nanodisks lattices, almost one order increasing of PL intensity was obtained. The experimental PL spectra are in good agreement with results of theoretical calculations. The realization of high-quality bound states in the continuum was confirmed by a comparative analysis of the experimental spectra and theoretical dispersion dependences. The results demonstrated the perspectives of these type structures for a flat band realization and supporting the slow light. Full article

Plasmonic metal nanostructures have promising applications in biosensing due to their ability to facilitate light–matter interaction. However, the damping of noble metal leads to a wide full width at half maximum (FWHM) spectrum which restricts sensing capabilities. Herein, we present a novel non-full-metal nanostructure sensor, namely indium tin oxide (ITO)–Au nanodisk arrays consisting of periodic arrays of ITO nanodisk arrays and a continuous gold substrate. A narrow-band spectral feature under normal incidence emerges in the visible region, corresponding to the mode-coupling of surface plasmon modes, which are excited by lattice resonance at metal interfaces with magnetic resonance mode. The FWHM of our proposed nanostructure is barely 14 nm, which is one fifth of that of full-metal nanodisk arrays, and effectively improves the sensing performance. Furthermore, the thickness variation of nanodisks hardly affects the sensing performance of this ITO-based nanostructure, ensuring excellent tolerance during preparation. We fabricate the sensor ship using template transfer and vacuum deposition techniques to achieve large-area and low-cost nanostructure preparation. The sensing performance is used to detect immunoglobulin G (IgG) protein molecules, promoting the widespread application of plasmonic nanostructures in label-free biomedical studies and point-of-care diagnostics. The introduction of dielectric materials effectively reduces FWHM, but sacrifices sensitivity. Therefore, utilizing structural configurations or introducing other materials to generate mode-coupling and hybridization is an effective way to provide local field enhancement and effective regulation. Full article

In this study, the sensitivity to the refractive index changes of the ambient was studied on the uniform gold film (~50 nm) with a 1D photonic crystal (PC) from periodic five TiO₂ (~110 nm)/SiO₂ (~200 nm) bilayers and gold nano-bumps array produced by direct laser writing on the same sample. The optical signal sensitivity of hybrid plasmonic resonances was compared with traditional surface plasmon resonance (SPR) on a single gold layer. The influence of the strong coupling regime between Tamm plasmon polariton (TPP) and propagated plasmon polaritons in the hybrid plasmonic modes on the sensitivity of the optical was discussed. Recent studies have shown very high hybrid plasmonic mode sensitivity S_HSPP ≈ 26,000 nm/RIU to the refractive index on the uniform gold layer; meanwhile, the introduction of gold lattice reduces the signal sensitivity, but increases the Q-factor of the plasmonic resonances. Despite this, the sensitivity to the ellipsometric parameters Ψ and Δ on the gold lattice was rather high due to the increased Q-factor of the resonances. The comparison of plasmonic resonance sensitivity to the refractive index changes of hybrid TPP-SPP mode on the uniform gold layer and traditional SPR have shown that hybrid plasmonic mode, due to a strong coupling effect, overcomes the SPR by about 27%. Full article

In the last few decades, plasmonic colorimetric biosensors raised increasing interest in bioanalytics thanks to their cost-effectiveness, responsiveness, and simplicity as compared to conventional laboratory techniques. Potential high-throughput screening and easy-to-use assay procedures make them also suitable for realizing point of care devices. Nevertheless, several challenges such as fabrication complexity, laborious biofunctionalization, and poor sensitivity compromise their technological transfer from research laboratories to industry and, hence, still hamper their adoption on large-scale. However, newly-developing plasmonic colorimetric biosensors boast impressive sensing performance in terms of sensitivity, dynamic range, limit of detection, reliability, and specificity thereby continuously encouraging further researches. In this review, recently reported plasmonic colorimetric biosensors are discussed with a focus on the following categories: (i) on-platform-based (localized surface plasmon resonance, coupled plasmon resonance and surface lattice resonance); (ii) colloid aggregation-based (label-based and label free); (iii) colloid non-aggregation-based (nanozyme, etching-based and growth-based). Full article

The surface plasmon resonance (SPR) effect and the hetero-junction structure play crucial roles in enhancing the photocatalytic performances of catalysts for the water-splitting reaction. In this study, a series of double perovskites LaFe_1−xN_ixO₃ was synthesized. LaFe_1−xN_ixO₃ particles were then decorated with sea urchin-like Au nanoparticles (NPs) with the average size of approximately 109.83 ± 8.48 nm via electrophoresis. The d-spacing became narrow and the absorption spectra occurred the redshift phenomenon more when doping increasing Ni mole concentrations for the raw LaFe_1−xN_ixO₃ samples. From XPS analysis, the Ni atoms were inserted into the lattice of the matrix, resulting in the defect of the oxygen vacancy, and NiO and Fe₂O₃ were formed. This hybrid structure was the ideal electrode for photoelectrochemical hydrogen production. The photonic extinction of the Au-coated LaFe_1−xNi_xO₃ was less than 2.1 eV (narrow band gap), and the particles absorbed more light in the visible region. According to the Mott–Schottky plots, all the LaFe_1−xN_ixO₃ samples were the n-type semiconductors. Moreover, all the band gaps of the Au-coated LaFe_1−xN_ixO₃ samples were higher than 1.23 eV (H⁺/H₂). Then, the hot electrons from the Au NPs were injected via the SPR effect, the coupling effect between LaFe_1−xN_ixO₃ and Au NPs, and the more active sites from Au NPs into the conduction band of the semiconductor, improving the hydrogen efficiency. The H₂ efficiency of the Au-coated LaFe_1−xNi_xO₃ measured in ethanol was approximately ten times larger than the that of Au-coated LaFe_1−xNi_xO₃ measured in 1-butanol at any testing temperature because ohmic and kinetic losses occurred in the latter solvent. Thus, the activation energies of ethanol at any testing temperature were smaller. The maximum real H₂ production was up to 43,800 μmol g⁻¹ h⁻¹ in ethanol. The redox reactions among metal ions, OH*, and oxides were consecutively proceeded under visible light illumination. Full article

In this study, the hybrid Au–Ag hexagonal lattice of triangular and square lattice of quadrate periodic nanoparticle arrays (PNAs) were designed to investigate their extinction spectra of the localized surface plasmon resonances (LSPRs). First, their simulating extinction spectra were calculated by discrete dipole approximation (DDA) numerical method by changing the media refractive index. Simulation results showed that as the media refractive index was changed from 1.0 to 1.2, the maximum peak intensity of LSPRs spectra had no apparent change and the wavelength to reveal the maximum peak intensity of LSPRs spectra was shifted lower value. Polystyrene (PS) nanospheres with two differently arranged structures were used as the templates to deposit the hybrid Au–Ag hexagonal lattice of triangular and square lattice of quadrate periodic PNAs by evaporation method. The hybrid Au–Ag hexagonal lattice of triangular and square lattice of quadrate PNAs were grown on single crystal silicon (c-Si) substrates, and their measured extinction spectra were compared with the calculated results. Finally, the fabricated hexagonal lattices of triangular PNAs were investigated as a sensor of polychlorinated biphenyl solution (PCB-77) by observing the wavelength to reveal the maximum extinction efficiency (λ_max). We show that the adhesion of β-cyclodextrins (SH-β-CD) on the hybrid Au–Ag hexagonal lattice of triangular PNAs could be used to increase the variation of λ_max. We also demonstrate that the adhesion of SH-β-CD increases the sensitivity and detection effect of PCB-77 in hexagonal lattice of triangular PNAs. Full article