Search Results (67)

Fully polarimetric SAR provides richer scattering information than single-polarisation imaging, but multichannel sparse image formation can be computationally and memory demanding, especially when channels are processed jointly. In our previous work, we introduced Orthogonal Matching Pursuit 2D Fully Polarimetric (OMP2D-FP), a greedy reconstruction algorithm that enforces a shared spatial support across polarimetric channels while exploiting a separable 2D formulation to avoid vectorisation and reduce computational burden and memory footprint relative to vectorised OMP-based formulations. In this paper, we extend its validation to real measurements and further develop its theoretical foundations by recasting the atom-selection step as a detection–estimation problem, thereby defining a cumulative objective function (COF) design space that enables the incorporation of disturbance statistics and prior knowledge into sparse recovery. Experiments on fully polarimetric SAR data of a T-72 tank over a wide range of aspect angles, SNR levels, and measurement percentages show that joint support selection improves reconstruction fidelity and polarimetric information preservation over independent per-channel processing, with particularly clear gains under challenging conditions. Preliminary applications of the COF framework (a whitening COF incorporating polarimetric clutter statistics and a mask-based COF incorporating spatial prior knowledge) yield encouraging results, motivating further systematic investigation of adaptive COF designs. Full article

Reconfigurable intelligent surface (RIS) technology is a promising enabler for 6G communication systems due to its ability to reconfigure wireless propagation environments. However, as a passive device, RIS requires significant pilot overhead for accurate channel estimation. Moreover, the integration of RIS with multiple-input multiple-output (MIMO) systems further exacerbates power consumption and hardware costs. To address these challenges, this paper investigates RIS-assisted millimeter-wave (mmWave) MIMO systems with low-resolution analog-to-digital converters (ADCs). Exploiting the inherent sparsity of mmWave channels and considering the distortion introduced by low-resolution quantization, we propose a compressive sensing (CS)-based channel estimation scheme. Furthermore, to mitigate the effects of angular leakage, we introduce an energy capture orthogonal matching pursuit (ECOMP) algorithm. Simulation results demonstrate that the proposed scheme not only improves channel estimation accuracy but also reduces pilot overhead and power consumption, while maintaining enhanced stability in high signal-to-noise ratio (SNR) regimes. Full article

Radar systems with exceptional anti-jamming performance are critical to meeting the high-performance requirements of future intelligent sensing systems. To address the deception jamming challenges encountered by intelligent sensing systems environments, a multi-parameter agile waveform is designed. The proposed waveform exhibits high flexibility across three dimensions—pulse width, pulse repetition interval, and carrier frequency. Compared to traditional single-parameter or two-parameter agile waveforms, which vary only one or two parameters, this multi-parameter approach significantly enhances anti-jamming performance by disrupting periodicity and providing higher flexibility in dynamic interference environments. To address the complex signal characteristics induced by multi-parameter agility, we further develop a low-complexity signal processing method based on a segmented multiple signal classification (MUSIC) algorithm, which accurately extracts Doppler information from pulse-compressed slow-time data to achieve high-precision velocity estimation. Both theoretical derivations and simulation results demonstrate that, compared with the conventional compressed sensing orthogonal matching pursuit method and the conventional MUSIC method that operate on the entire signal, our segmented approach divides the signal into smaller segments, reducing computational complexity and improving velocity estimation accuracy. Notably, even in high-intensity, densely jammed environments, the system reliably extracts target information. Full article

Deep learning-based synthetic aperture radar (SAR) automatic target recognition (ATR) methods exhibit a tendency to overfit specific operating conditions—such as radar parameters and background clutter—which frequently leads to high sensitivity against variations in these conditions. A novel electromagnetic reconstruction feature alignment (ERFA) method is proposed in this paper, which integrates electromagnetic reconstruction with feature alignment into a fully convolutional network, forming the ERFA-FVGGNet. The ERFA-FVGGNet comprises three modules: electromagnetic reconstruction using our proposed orthogonal matching pursuit with image-domain cropping-optimization (OMP-IC) algorithm for efficient, high-precision attributed scattering center (ASC) reconstruction and extraction; the designed FVGGNet combining transfer learning with a lightweight fully convolutional network to enhance feature extraction and generalization; and feature alignment employing a dual-loss to suppress background clutter while improving robustness and interpretability. Experimental results demonstrate that ERFA-FVGGNet boosts trustworthiness by enhancing robustness, generalization and interpretability. Full article

Owing to the intrinsic sparsity of GNSS signals in the correlation domain, compressed sensing (CS) is attractive for the rapid acquisition of high-dynamic GNSS signals. However, the compressed measurement-associated noise folding inherently amplifies the pre-measurement noise, leading to an inevitable degradation of acquisition performance. In this paper, a novel CS-based GNSS signal acquisition algorithm is, for the first time, proposed with the efficient suppression of the amplified measurement noise and low computational complexities. The offline developed code phase and frequency bin-compressed matrices in the correlation domain are utilized to obtain a real-time observed matrix, from which the correlation matrix of the GNSS signal is rapidly reconstructed via a denoised back-projection and a non-iterative shrinkage-thresholding (NIST) operation. A detailed theoretical analysis and extensive numerical explorations are undertaken for the algorithm computational complexity, the achievable acquisition performance, and the algorithm performance robustness to various Doppler frequencies. It is shown that, compared with the classic orthogonal matching pursuit (OMP) reconstruction, the NIST reconstruction gives rise to a 3.3 dB improvement in detection sensitivity with a computational complexity increase of <10%. Moreover, the NIST-reconstructed CS acquisition algorithm outperforms the conventional CS acquisition algorithm with frequency serial search (FSS) in terms of both the acquisition performance and the computational complexity. In addition, a variation in the detection sensitivity is observed as low as 1.3 dB over a Doppler frequency range from 100 kHz to 200 kHz. Full article

To address low training efficiency and poor reconstruction in traditional K Singular Value Decomposition (KSVD) for compressive sensing of shock wave signals, this study proposes an improved algorithm, DH-KSVD, integrating dynamic pruning and hybrid coding. The dynamic pruning mechanism eliminates redundant atoms according to their contributions and adaptive thresholds, while incorporating residual features to enhance dictionary compactness and training efficiency. The hybrid sparse constraint integrates the sparsity of ${\ell }_0$-Orthogonal Matching Pursuit (OMP) with the noise robustness of ${\ell }_1$-Least Absolute Shrinkage and Selection Operator (LASSO), dynamically adjusting their relative weights to enhance both coding quality and reconstruction stability. Experiments on typical shock wave datasets show that, compared with Discrete Cosine Transform (DCT), KSVD, and feature-based segmented dictionary methods (termed CC-KSVD), DH-KSVD reduces average training time by 46.4%, 31%, and 13.7%, respectively. At a Compression Ratio (CR) of 0.7, the Root Mean Square Error (RMSE) decreases by 67.1%, 65.7%, and 36.2%, while the Peak Signal-to-Noise Ratio (PSNR) increases by 35.5%, 39.8%, and 11.8%, respectively. The proposed algorithm markedly improves training efficiency and achieves lower RMSE and higher PSNR under high compression ratios, providing an effective solution for compressing long-duration, transient shock wave signals. Full article

Vehicle-to-everything (V2X) communication, a current key area of research, has a large impact on traffic safety, traffic efficiency, autonomous driving technology development, and intelligent transport. In order to achieve the low-latency performance and high transmission efficiency required for V2X communication, channel estimation for transmission channels is particularly important. In this regard, this paper proposes an improved general orthogonal match pursuit (GOMP) channel estimation algorithm based on the base extension model for an orthogonal time frequency space (OTFS) system. Firstly, the channel matrix is decomposed using the basis expansion model. Then, the strong sparsity of the basis function is exploited for channel estimation using the GOMP algorithm, while the ordinal difference restriction method and the weak selectivity principle are introduced to improve the system. The obtained improved GOMP algorithm not only shows a greater improvement in terms of normalized mean square error (NMSE) and bit error rate (BER) performance but also greatly reduces computational complexity, enabling it to better satisfy the needs of V2X communication. Full article

With the evolution of 6G technology toward global coverage and multidimensional integration, OTFS modulation has become a research focus due to its advantages in high-mobility scenarios. However, existing OTFS signal detection algorithms face challenges such as pilot contamination, Doppler spread degradation, and diverse interference in complex environments. This paper proposes the SPARSE-OTFS-Net algorithm, which establishes a comprehensive signal detection solution by innovatively integrating sparse random pilot design, compressive sensing-based frequency offset estimation with closed-loop cancellation, and joint denoising techniques combining an autoencoder, residual learning, and multi-scale feature fusion. The algorithm employs deep learning to dynamically generate non-uniform pilot distributions, reducing pilot contamination by 60%. Through orthogonal matching pursuit algorithms, it achieves super-resolution frequency offset estimation with tracking errors controlled within 20 Hz, effectively addressing Doppler spread degradation. The multi-stage denoising mechanism of deep neural networks suppresses various interferences while preserving time-frequency domain signal sparsity. Simulation results demonstrate: Under large frequency offset, multipath, and low SNR conditions, multi-kernel convolution technology achieves significant computational complexity reduction while exhibiting outstanding performance in tracking error and weak multipath detection. In 1000 km/h high-speed mobility scenarios, Doppler error estimation accuracy reaches ±25 Hz (approaching the Cramér-Rao bound), with BER performance of 5.0 × 10⁻⁶ (7× improvement over single-Gaussian CNN’s 3.5 × 10⁻⁵). In 1024-user interference scenarios with BER = 10⁻⁵ requirements, SNR demand decreases from 11.4 dB to 9.2 dB (2.2 dB reduction), while maintaining EVM at 6.5% under 1024-user concurrency (compared to 16.5% for conventional MMSE), effectively increasing concurrent user capacity in 6G ultra-massive connectivity scenarios. These results validate the superior performance of SPARSE-OTFS-Net in 6G ultra-massive connectivity applications and provide critical technical support for realizing integrated space–air–ground networks. Full article

The confined space of coal mines characterized by curved tunnels with rough surfaces and a variety of deployed production equipment induces severe signal attenuation and interruption, which significantly degrades the accuracy of conventional channel estimation algorithms applied in coal mine wireless communication systems. To address these challenges, we propose a modified Bilinear Generalized Approximate Message Passing (mBiGAMP) algorithm enhanced by intelligent reflecting surface (IRS) technology to improve channel estimation accuracy in coal mine scenarios. Due to the presence of abundant coal-carrying belt conveyors, we establish a hybrid channel model integrating both fast-varying and quasi-static components to accurately model the unique propagation environment in coal mines. Specifically, the fast-varying channel captures the varying signal paths affected by moving conveyors, while the quasi-static channel represents stable direct links. Since this hybrid structure necessitates an augmented factor graph, we introduce two additional factor nodes and variable nodes to characterize the distinct message-passing behaviors and then rigorously derive the mBiGAMP algorithm. Simulation results demonstrate that the proposed mBiGAMP algorithm achieves superior channel estimation accuracy in dynamic conveyor-affected coal mine scenarios compared with other state-of-the-art methods, showing significant improvements in both separated and cascaded channel estimation. Specifically, when the NMSE is ${10}^{-3}$, the SNR of mBiGAMP is improved by approximately 5 dB, 6 dB, and 14 dB compared with the Dual-Structure Orthogonal Matching Pursuit (DS-OMP), Parallel Factor (PARAFAC), and Least Squares (LS) algorithms, respectively. We also verify the convergence behavior of the proposed mBiGAMP algorithm across the operational signal-to-noise ratios range. Furthermore, we investigate the impact of the number of pilots on the channel estimation performance, which reveals that the proposed mBiGAMP algorithm consumes fewer number of pilots to accurately recover channel state information than other methods while preserving estimation fidelity. Full article

Ultrasonic TOFD imaging, as an important non-destructive testing method, has a wide range of applications in pipeline girth weld inspection and testing. Due to the limited bandwidth of ultrasonic transducers, near-surface defects in the weld are masked and cannot be recognized, resulting in poor longitudinal resolution. Affected by the inherent diffraction effect of scattered acoustic waves, defect images have noticeable trailing, resulting in poor transverse resolution of TOFD imaging and making quantitative defect detection difficult. In this paper, based on the assumption of the sparseness of ultrasonic defect distribution, by constructing a convolutional model of the ultrasonic TOFD signal, the Orthogonal Matching Pursuit (OMP) sparse deconvolution algorithm is utilized to enhance the longitudinal resolution. Based on the synthetic aperture acoustic imaging model, in the wavenumber domain, backpropagation inference is implemented through phase transfer technology to eliminate the influence of diffraction effects and enhance transverse resolution. On this basis, the time-domain sparse deconvolution and frequency-domain synthetic aperture focusing methods mentioned above are combined to enhance the resolution of ultrasonic TOFD imaging. The simulation and experimental results indicate that this technique can outline the shape of defects with fine detail and improve image resolution by about 35%. Full article

In the field of target localization, improving direction-of-arrival (DOA) estimation methods for weak targets in the context of strong interference remains a significant challenge. This paper presents a robust DOA estimator for localizing weak signals of interest in an environment with strong interfering sources that improve passive sonar DOA estimation. The presented estimator combines a multiple-measurement-vector orthogonal matching pursuit (MOMP) algorithm and a dimension-reduced matrix filter with deep nulling (DR-MFDN). Strong interfering sources are adaptively suppressed by employing the DR-MFDN, and the beam-space passband robustness is improved. In addition, Gaussian pre-whitening is used to prevent noise colorization. Simulations and experimental results demonstrate that the presented estimator outperforms a conventional estimator based on a dimension-reduced matrix filter with nulling (DR-MFN) and the multiple signal classification algorithm in terms of interference suppression and localization accuracy. Moreover, the presented estimator can effectively handle short snapshots, and it exhibits superior resolution by considering the signal sparsity. Full article

The time difference of arrival (TDOA) estimation plays a crucial role in emitter localization and time synchronization applications. When time among multiple sensors is synchronized, the TDOAs between the sensors and the emitter can be measured to achieve hyperbolic positioning of the emitter. Conversely, if the positions of both the sensors and the emitter are known, TDOAs can be utilized to synchronize the clocks across the sensors. Given that compressed sensing (CS) can reduce both the sampling rate and data volume, thereby enhancing the efficiency of TDOA estimation, there has been growing interest among researchers in exploring TDOA estimation within the CS framework. In scenarios such as passive positioning, the signals received by sensors are often non-cooperative, and the underlying signal system is unknown, making it difficult to obtain a sparse representation of the signal. This paper introduces an incomplete reconstruction-based TDOA estimation method along with an improved variant. By selecting a partial Fourier transform matrix as the measurement matrix and a Fourier transform matrix as the projection matrix, the orthogonal matching pursuit (OMP) algorithm is employed to reconstruct the compressed measurement data. Through subsequent processing steps, such as conjugate mirroring, TDOA estimation between two signals can be performed. Although the reconstructed signal may substantially differ from the original, the accuracy of TDOA estimation remains reliable. Simulation results demonstrate that when the signal-to-noise ratio (SNR) of the received signal is at least 0 dB and the compressed sampling length exceeds one-tenth of the original signal length, the TDOA estimation error of the proposed method is nearly identical to that of the cross-correlation method. Full article

Dams significantly impact the environment, industries, residential areas, and agriculture. Efficient dam management can mitigate negative impacts and enhance benefits such as flood and drought reduction, energy efficiency, water access, and improved irrigation. This study tackles the critical issue of predicting dam occupancy levels precisely to contribute to sustainable water management by enabling efficient water allocation among sectors, proactive drought management, controlled flood risk mitigation, and preservation of downstream ecological integrity. Our research suggests that combining physical models of water inflow and outflow “such as evapotranspiration using the Penman–Monteith equation, along with parameters like water consumption, solar radiation, and rainfall” with data-driven models based on historical reservoir data is crucial for accurately predicting occupancy levels. We implemented various prediction models, including Random Forest, Extra Trees, Long Short-Term Memory, Orthogonal Matching Pursuit CV, and Lasso Lars CV. To strengthen our proposed model with robust evidence, we conducted statistical tests on the mean absolute percentage errors of the models. Consequently, we demonstrated the impact of physical model parameters on prediction performance and identified the best method for predicting dam occupancy levels by comparing it with findings from the scientific literature. Full article

This study focused on improving the clustering performance of hyperspectral imaging (HSI) by employing the Generalized Orthogonal Matching Pursuit (GOMP) algorithm for feature extraction. Hyperspectral remote sensing imaging technology, which is crucial in various fields like environmental monitoring and agriculture, faces challenges due to its high dimensionality and complexity. Supervised learning methods require extensive data and computational resources, while clustering, an unsupervised method, offers a more efficient alternative. This research presents a novel approach using GOMP to enhance clustering performance in HSI. The GOMP algorithm iteratively selects multiple dictionary elements for sparse representation, which makes it well-suited for handling complex HSI data. The proposed method was tested on two publicly available HSI datasets and evaluated in comparison with other methods to demonstrate its effectiveness in enhancing clustering performance. Full article

To better meet communication needs, 6G proposes Integrated Satellite-Terrestrial Networks. Integrated Sensing and Communication (ISAC) is one of the key technologies of Integrated Satellite-Terrestrial Networks, which can reduce the energy consumption of the system, improve communication efficiency, and increase the utilization rate of spectrum resources. In the existing technology, the Modulated Wideband Converter (MWC) system can provide support for the miniaturization and intelligence of wireless device sensing and communication systems. Therefore, the MWC system can be used as a preliminary application of ISAC technology. However, the reconstruction effect of the conventional MWC system under the influence of noise is not stable. Therefore, we propose a signal processing optimization scheme for the MWC system based on spatial information entropy. First, the subsequent reconstruction algorithm is considered to require the dynamic and flexible processing of the sampled signals to reduce the influence of noise. Second, for the shortcomings of the original Orthogonal Matching Pursuit (OMP) algorithm, the concept of the genetic algorithm is used to optimize the algorithm by constructing the feature factor through spatial information gain and spatial information features. According to the simulation results, compared with the traditional MWC system, the scheme proposed in this paper is improved in all indicators. Full article