Search Results (37)

Catalpa bungei C.A.Mey is an economically significant deciduous tree valued for timber production and landscaping applications. An efficient regeneration system is crucial for clonal propagation and serves as a foundation for future molecular breeding in C. bungei. This study established two in vitro regeneration pathways—indirect somatic embryogenesis and shoot organogenesis utilizing mature zygotic embryos as explants. Primary callus was induced from cotyledon, hypocotyl, and plumule explants. A high frequency (45.73%) of yellow-green compact callus was achieved on De-Klerk and Walton (DKW) medium supplemented with 2.0 mg/L 6-BA, 1.0 mg/L zeatin (ZT), and 0.1 mg/L NAA. Subsequent transfer to 1.5× Murashige and Skoog (MS) medium containing 1.5 mg/L 6-BA, 0.2 mg/L ZT, and 0.1 mg/L NAA yielded the highest embryogenic callus induction rate (16.67%). Embryogenic callus demonstrated bipotent potential, generating both adventitious shoots and somatic embryos under specific hormonal conditions. Histological analyses confirmed the typical developmental stages of somatic embryos, from globular to cotyledonary forms, validating the embryogenic origin of regenerated structures. Furthermore, hormone or osmotic additives such as abscisic acid (ABA), Phytagel, and polyethylene glycol 4000 (PEG4000) significantly enhanced somatic embryo induction, with Phytagel at 5.0 g/L achieving the highest rate (76.31%). For shoot organogenesis, the optimal hormonal combination of the 0.6 mg/L 6-BA, 0.4 mg/L KT, and 0.15 mg/L NAA achieved the highest bud induction rate (88.89%) and produced an average of 4.07 adventitious buds per explant. This study presents an efficient regeneration system for C. bungei, providing a practical platform for large-scale propagation and basis for biotechnological applications in woody plants. Full article

Malania oleifera Chun & S.K. Lee, an endemic monotypic species that belongs to the family Olacaceae, is under continuous pressure of decline owing to several ecological and physiological factors. The present study aimed to establish an efficient in vitro protocol for callus-mediated indirect somatic embryogenesis in M. oleifera by alleviating tissue browning. Internodes and leaves obtained from seedlings were used as explants. Antioxidant pre-treatment (ascorbic acid, AA) followed by different carbon sources (sucrose, maltose, glucose, and fructose) and plant growth regulators in various concentrations and combinations were employed in Woody Plant Medium (WPM) to alleviate explant browning and induce callus formation from the explants. AA pre-treatment and subsequent culture on maltose at a concentration of 116.8 mM were optimal for controlling phenolic exudation on >90% of both explants. The highest responses of 53.77% and 57.43% for embryogenic calli were induced from internode and leaf explants, respectively. The highest responses, 85.22% and 93.80%, were observed for somatic embryos that matured into the globular, heart-shaped and torpedo stages at different percentages on NAA 2.5 mg/L in combination with BA 1.0 mg/L for both explants. The matured somatic embryos were finally germinated at a maximum concentration of GA₃, 2.0 mg/L. All plantlets were successfully hardened and acclimatized under culture room conditions and then transferred to the greenhouse. The current study suggests an efficient protocol for indirect somatic embryogenesis by alleviating phenolic exudation from the explants of M. oleifera. This first successful report of in vitro culture establishment in M. oleifera may offer an effective alternative measure to conserve this species and provide a system for analyzing bioactive chemicals and for use in the oil industry. Full article

Traditional gladiolus propagation methods are now supplemented with in vitro propagation to meet the demands of modern floriculture in terms of quick production of disease-free, quality planting material. Due to virus infections, vegetative propagation in gladiolus in the field is slow, and is a serious concern in the propagation of gladiolus. In vitro propagation provides an enormous increase in propagation rate and the ability to produce disease-free plant material. Numerous elements, including cultivars, explant type, size of explants, position of explants on medium, plant growth regulators and certain additives, incubation conditions, and sub-culturing time, all have a significant impact on in vitro clonal propagation of gladiolus plants as well as the development of in vitro cormel efficiency. There are certain obstacles and challenges that arise in the in vitro development of plants and the cormels of gladiolus. However, numerous studies and review reports on gladiolus for in vitro propagation have been reported, but very little is known about the factors influencing gladiolus’ in vitro effectiveness. In the present review, we focused on and analyzed research data accumulated over 50 years on diverse strategies for in vitro propagation such as direct, indirect organogenesis, and somatic embryogenesis, as well as various factors such as physical, nutritional, and hormonal influences on in vitro propagation, in vitro cormel formation efficiency, difficulties that arise, and new insights into in vitro development in gladiolus from the available literature worldwide. Future possibilities for further improvement in the in vitro propagation of ornamental gladiolus are also discussed. The current review provides insight into a comprehensive protocol for gladiolus in vitro propagation and emphasizes the importance of continuously advancing tissue culture techniques and factors influencing the in vitro efficiency towards improving in vitro plantlets and cormels in gladiolus (Gladiolus spp.). Full article

An efficient and reproducible in vitro method for indirect somatic embryogenesis was optimized by culturing leaf and leaf with petiole explants of Lycium barbarum L. Murashige and Skoog (MS) medium, supplemented with various concentrations of Picloram and 2,4-Dichlorophenoxyacetic acid (2,4-D), individually and in combinations, were tested. Picloram (1.0 µM) showed a better response compared to 2,4-D and results indicate it to be a better auxin for induction of somatic embryos for Goji berry. It was seen that the leaf explants were more responsive in callus and somatic embryo induction than the leaf with petiole explant when incubated in the dark for 5 weeks. Embryogenic callus, after being transferred to MS medium containing Benzyl amino purine (BAP) in 1.0 µM, 5.0 µM and 10.0 µM, began to differentiate in light after one week. MS medium with 1.0 µM Picloram + 10 µM BAP resulted as the most favorable treatment for somatic embryogenesis in Lycium barbarum L. Removal of plant growth regulators from MS medium and culturing induced calluses under 16 h photoperiod resulted in globular, heart, torpedo, cotyledons, and further development into plantlets. Well-developed plants have been obtained and are capable of acclimatizing in ex vitro conditions. In addition, the effects of desiccation treatments (0, 1, 3, 6, 9 h, and 12 h) on embryogenic callus for somatic embryo induction were found to be directly proportional to the length of desiccation treatment at room temperature. After 9 h and 12 h of desiccation treatments, 60% and 90% of plated calluses resulted in somatic embryos, respectively. In a L. barbarum callus mass, Acetocarmine and Evans blue double staining differentiated between embryogenic and non-embryogenic callus. These findings will help Goji berry improvement by elite clone production, ex situ conservation projects, scaling up plant production, and agronomy for the commercial production of this superfruit in the future. Full article

Saffron (Crocus sativus L.), being one of the distinguished commercial spice crops in the world, is in demand for its culinary, colorant, and pharmaceutical benefits. In this study, a novel indirect somatic embryogenesis (SE) system was, thus, established for the study of this plant. To this end, firstly, the lateral buds were cultured. Then, the cultures were transformed using Murashige and Skoog (MS) medium supplemented with either 6-benzyladenine (BA: 5 and 10 mg/L), naphthalene acetic acid (NAA: 0, 1, and 2 mg/L), or trans-zeatin (tZ: 0, 0.5, and 1.0 mg/L), before being classified into four structures: white globular (WG), yellow compact nodular (YCN), yellow-brown fragile (YBF), and dark-brown porous (DBP). As soon as BA (10 mg/L) and NAA (2 mg/L) were added, elevated percentages of white globular calli (56.8%) and white globular calli (31.5%) structures were induced. Additionally, 6-benzyladenine (5 mg/L) and naphthalene acetic acid (1 mg/L) allowed the formation of yellow-brown fragile structures, and the combination of 6-benzyladenine (10 mg/L) with trans-zeatin (1 mg/L) formed the DBP structures. After three months, the white globular calli were incubated using the MS basal medium, before being augmented with thidiazuron (TDZ: 1 mg/L) and picloram (PIC: 2 mg/L), from which 60% of the cases matured into shoots and, ultimately, cormlets. Morphoanatomical analyses also showed that the white globular calli cells were closely arranged, as they had a dense cytoplasm, a significant vascular differentiation, and embryoids. Furthermore, the yellow compact nodular structures were characterized by a strong differentiation capacity and contained many meristematic cells with high caryomitosis centers. We observed that the yellow-brown fragile calli had looser cell arrangements, with a vascular structure located on the protoderm edge, while there was no obvious cellular arrangement in the dark-brown porous structures. The induction of the adventitious buds in vivo on the MS medium that was supplemented with thidiazuron and picloram accordingly demonstrated the highest rates (60%) of white globular calli. Full article

Chrysanthemum (Chrysanthemum × morifolium (Ramat.) Hemsl.) holds a prominent position in the market of ornamental plants. To further advance chrysanthemum breeding efforts, the development of haploids may be useful. Therefore, the effect of various chemical and thermal treatments on regeneration efficiency and ploidy level in chrysanthemum was studied. Ovaries and ovules of three chrysanthemum cultivars, i.e., ‘Brasil,’ ‘Capitola,’ and ‘Jewel Time Yellow,’ were cultured either on a medium with 1 mg·L⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) and different concentrations (0.5–1.5 mg·L⁻¹) of thidiazuron (TDZ) or subjected to thermal shock (pretreatment temperature of 4 °C or 32 °C) and cultured on a medium with 1 mg·L⁻¹ 2,4-D and 1 mg·L⁻¹ 6-benzylaminopurine (BAP). It was found that ovaries had a greater organogenic potential (both in terms of callogenesis and shoot formation) than ovules. Microscopic analyses revealed that shoots mainly developed via indirect somatic embryogenesis from a callus developed from the ovary wall. The highest number of shoots was produced in cooled (at 4 °C) ovaries of chrysanthemum ‘Brasil’ and in ‘Jewel Time Yellow’ ovaries cultured on a medium with 1.0–1.5 mg·L⁻¹ TDZ. The latter cultivar also had the highest potential to produce plants with an altered ploidy level (doubled and halved the number of chromosomes). This study demonstrates that manipulating factors such as temperature and thidiazuron concentration can enhance regeneration efficiency and induce altered ploidy levels in selected cultivars, offering valuable insights for chrysanthemum breeding programs. Full article

Coffee is a crop of global relevance. Indirect somatic embryogenesis has allowed plants of different coffee genotypes to be massively regenerated. The culture medium composition can affect the calli characteristics that are generated and their ability to form somatic embryos. This research aimed to determine the influence of the type of callus, growth regulators, and phytagel concentration on the embryogenic capacity of the Colombia variety. Leaf explants were cultured on Murashige and Skoog medium with 2,4-dichlorophenoxyacetic acid (2,4-D) (0.5–1.0 mg L⁻¹), benzylaminopurine (BAP, 1.0 mg L⁻¹), and phytagel (2.3–5.0 g L⁻¹). The explants generated two types of calli: friable (beige, soft, watery, easy disintegration, polyhedral parenchyma cells) and compact (white, hard, low water content, difficult disintegration, elongated parenchyma cells). About 68% of the total callus generated was compact; this type of callus produced a greater number of embryos (71.3) than the friable one (29.2). The number of differentiated embryos was significantly affected by the concentration of phytagel; higher concentrations (5.0 g L⁻¹) resulted in larger quantities (73.7). The highest number of embryos (127.47) was obtained by combining 1.0 mg L⁻¹ 2,4-D, 1.0 mg L⁻¹ BAP, 5.0 g L⁻¹ phytagel, and compact callus. Full article

Blue honeysuckle (Lonicera caerulea L.), which belongs to the Caprifoliaceae family, is an emerging fruit crop worldwide. For the development of a transgenic system and multipurpose tissue culture, this study for the first time established an in vitro regeneration system via somatic embryogenesis, as well as improving the previously established indirect organogenesis-based regeneration system. For embryogenesis, Murashige and Skoog (MS) medium supplemented with 1.0 mg/L 2,4-dichlorophenoxyacetic acid (2,4-D) showed the highest induction rate of the embryogenic callus (97.6%), and MS supplemented with 0.1 mg/L 6-benzyladenine (6-BA), 0.1 mg/L α-naphthaleneacetic acid (NAA), and 0.5 g/L activated carbon (AC) achieved the highest somatic embryo rate (28.3%). For indirect organogenesis, MS medium supplemented with 1.0 mg/L 6-BA and 0.1 mg/L NAA resulted in the highest non-embryogenic callus induction rate (98.9%) and adventitious shoot induction rate (51.6%). For adventitious root induction, MS supplemented with 1.0 mg/L indole-3-butyric acid (IBA) achieved the highest root induction rate (96.0%) and average root length (4.6 cm), whereas MS supplemented with 0.5 mg/L indole-3-acetic acid (IAA) resulted in the highest average regenerated root number (8.8). The total time for the regeneration from explants to soil-planted seedlings (10 euphylla) was 105 and 150 days with an efficiency of 44.1% and 23.9% through organogenesis and somatic embryogenesis, respectively. This study provides a powerful tool for rapid propagation, proliferation, and transformation, as well as laying a technological foundation for gene function research and genetic improvement of blue honeysuckle. Full article

The use of in vitro tissue culture for herbal medicines has been recognized as a valuable source of botanical secondary metabolites. The tissue culture of ginseng species is used in the production of bioactive compounds such as phenolics, polysaccharides, and especially ginsenosides, which are utilized in the food, cosmetics, and pharmaceutical industries. This review paper focuses on the in vitro culture of Panax ginseng and accumulation of ginsenosides. In vitro culture has been applied to study organogenesis and biomass culture, and is involved in direct organogenesis for rooting and shooting from explants and in indirect morphogenesis for somatic embryogenesis via the callus, which is a mass of disorganized cells. Biomass production was conducted with different types of tissue cultures, such as adventitious roots, cell suspension, and hairy roots, and subsequently on a large scale in a bioreactor. This review provides the cumulative knowledge of biotechnological methods to increase the ginsenoside resources of P. ginseng. In addition, ginsenosides are summarized at enhanced levels of activity and content with elicitor treatment, together with perspectives of new breeding tools which can be developed in P. ginseng in the future. Full article

Somatic embryogenesis (SE) is an excellent example of mass plant propagation. Due to its genetic variability and low somaclonal variation, coffee SE has become a model for in vitro propagation of woody species, as well as for large-scale production of vigorous plants that are advantageous to modern agriculture. The success of the large-scale propagation of an embryogenic system is dependent on the development, optimization, and transfer of complementary system technologies. In this study, two successful SE systems were combined with a SETIS™ bioreactor immersion system to develop an efficient and cost-effective approach for the in vitro development of somatic embryos of Coffea spp. This study used an efficient protocol for obtaining somatic embryos, utilizing direct and indirect SE for both C. canephora and C. arabica. Embryos in the cotyledonary stage were deposited in a bioreactor to complete their stage of development from embryo to plant with minimal manipulation. Following ten weeks of cultivation in the bioreactor, complete and vigorous plants were obtained. Different parameters such as fresh weight, length, number of leaves, and root length, as well as stomatal index and relative water content, were recorded. In addition, the survival rate and ex vitro development of plantlets during acclimatization was assessed. The best substrate combination was garden soil (GS), peat moss (PM), and agrolite (A) in a 1:1:0.5 ratio, in which the bioreactor-regenerated plants showed an acclimatization rate greater than 90%. This is the first report on the use of SETIS™ bioreactors for the in vitro development of somatic embryos in Coffea spp., providing a technology that could be utilized for the commercial in vitro propagation of coffee plants. A link between research and innovation is necessary to establish means of communication that facilitate technology transfer. This protocol can serve as a basis for the generation and scaling of different species of agroeconomic importance. However, other bottlenecks in the production chains and the field must be addressed. Full article

Tamarillo is a solanaceous tree that has been extensively studied in terms of in vitro clonal propagation, namely somatic embryogenesis. In this work, a protocol of indirect somatic embryogenesis was applied to obtain embryogenic and non-embryogenic callus from leaf segments. Nuclear magnetic resonance spectroscopy was used to analyze the primary metabolome of these distinct calli to elucidate possible differentiation mechanisms from the common genetic background callus. Standard multivariate analysis methods were then applied, and were complemented by univariate statistical methods to identify differentially expressed primary metabolites and related metabolic pathways. The results showed carbohydrate and lipid metabolism to be the most relevant in all the calli assayed, with most discriminant metabolites being fructose, glucose and to a lesser extent choline. The glycolytic rate was higher in embryogenic calli, which shows, overall, a higher rate of sugar catabolism and a different profile of phospholipids with a choline/ethanolamine analysis. In general, our results show that a distinct primary metabolome between embryogenic and non-embryogenic calli occurs and that intracellular levels of fructose and sucrose and the glucose to sucrose ratio seem to be good candidates as biochemical biomarkers of embryogenic competence. Full article

Genetic transformation is an important strategy for enhancing plant biomass or resistance in response to adverse environments and population growth by imparting desirable genetic characteristics. Research on plant genetic transformation technology can promote the functional analysis of plant genes, the utilization of excellent traits, and precise breeding. Various technologies of genetic transformation have been continuously discovered and developed for convenient manipulation and high efficiency, mainly involving the delivery of exogenous genes and regeneration of transformed plants. Here, currently developed genetic transformation technologies were expounded and compared. Agrobacterium-mediated gene delivery methods are commonly used as direct genetic transformation, as well as external force-mediated ways such as particle bombardment, electroporation, silicon carbide whiskers, and pollen tubes as indirect ones. The regeneration of transformed plants usually involves the de novo organogenesis or somatic embryogenesis pathway of the explants. Ectopic expression of morphogenetic transcription factors (Bbm, Wus2, and GRF-GIF) can significantly improve plant regeneration efficiency and enable the transformation of some hard-to-transform plant genotypes. Meanwhile, some limitations in these gene transfer methods were compared including genotype dependence, low transformation efficiency, and plant tissue damage, and recently developed flexible approaches for plant genotype transformation are discussed regarding how gene delivery and regeneration strategies can be optimized to overcome species and genotype dependence. This review summarizes the principles of various techniques for plant genetic transformation and discusses their application scope and limiting factors, which can provide a reference for plant transgenic breeding. Full article

This study developed an efficient protocol for the in vitro propagation of giant reed (Arundo donax L.) biomass, defining a complete cycle of the induction of somatic embryogenesis from immature inflorescences, followed by the maturation of somatic embryos and the subsequent multiplication of the derived shoots in liquid culture in a temporary immersion system (TIS). The best explants were found to be 30 cm long immature inflorescences, preferably collected in spring. Such an explant type was easy to decontaminate, and the spikelets isolated from it provided over 100 embryogenic callus lines. Among the callus induction media tested, gelled MS medium supplemented with 1.1 mg/L 2,4-D provided the highest percentage of responsive spikelets and the highest density of embryogenic callus. Maturation of the embryogenic callus was easily triggered on gelled MS medium devoid of plant growth regulators. The obtained shoots could be further multiplied on previously optimized gelled DKW medium supplemented with 30 g/L sucrose, 5 mg/L BA, 0.1 mg/L IBA, and 6.8 g/L plant agar. Subsequent high multiplication of the developed shoots was achieved in liquid culture in TIS using a Plantform™ bioreactor, with an immersion cycle of 12 min every 8 h. Full article

Cymbidium is an economically important genus in the orchid family (Orchidaceae) that has a pronounced medicinal and ornamental value. Medicinally, the plant is employed as a tonic to treat weakness in chronic diseases, dizziness, eye problems, burns, and wounds, etc. Cymbidiums are highly prized for their graceful flowers and sweet fragrance and are among the top ten most popular cut flowers. They are one of the most important commercial orchid groups and account for 3% of cut flowers in floriculture. Some orchid species in this genus are particularly threatened by excessive harvesting, so conservation measures are needed. Several enthusiastic organizations (e.g., The Cymbidiums Society of America, The Cymbidiums Club in Australia, The Golden Gate Cymbidiums Society, Alameda, CA, etc.) are dedicated to propagating, conserving, promoting, appreciating, and disseminating information about these beautiful and charming orchids. Through organogenesis (direct and indirect) and somatic embryogenesis, extensive propagation techniques for Cymbidiums have been developed to create protocols for synthetic seed production leading to large-scale propagation and long-term ex situ and in vitro conservation. This review highlights the medicinal uses, flower trade, conservation, and massive propagation techniques of Cymbidium orchids. Full article

Kohlrabi (Brassica oleracea var. gongylodes) is a vegetable cultivated for its edible stem tuber. Although valued for its nutritional properties and tolerance to abiotic stress, kohlrabi is one of the least studied brassicas. In this review, we summarize the results of our decade-long research on in vitro morphogenesis of kohlrabi, starting from 2013. Protocols for efficient in vitro regeneration with minimal requirements for external application of plant growth regulators (PGRs) have been developed, both by somatic embryogenesis (SE) and by de novo shoot organogenesis (DNSO). Efficient regeneration by direct SE was achieved using immature zygotic embryos as explants incubated on PGR-free media, and the production process was maintained in culture thanks to highly efficient secondary SE. Conversely, efficient regeneration by indirect DNSO was achieved using entire seedlings as explants and adding only cytokinin (CK) without the need for exogenous auxin. Comprehensive phytohormone analyses revealed that different exogenously applied CKs differentially affected the composition of endogenous phytohormones and induced changes in the expression of cell cycle-related genes and other genes involved in the organogenic response. The addition of high sucrose concentrations to the nutrient media failed to induce the formation of stem tubers in in vitro culture, but revealed a complex interaction with exogenously applied CKs, interfering with both the endogenous phytohormonome and the expression of organogenesis-related genes. Our work has provided substantial biotechnological advances in the field of in vitro regeneration of kohlrabi, as well as in understanding the underlying phytohormonal regulation. The review aims to introduce kohlrabi to the scientific community as a model system for both basic and applied research, while we continue seeking answers to the outstanding questions and trying to pave the way for the development of more resistant varieties. Full article