Search Results (261)

Acute myeloid leukemia is characterized by the presence of malignant cells and their uncontrolled growth in bone marrow. Recent studies have been focused on the ability of curcumin, a polyphenol derived from the Curcuma longa plant. The role of curcumin is currently under investigation, due to its antitumor properties and action on several pathways, including Nuclear Factor kappa-light-chain-enhancer of activated B cells, Signal Transducer and Activator of Transcription 3, Phosphatidylinositol 3-kinase/protein kinase B, and mitogen-activated protein kinase. The aim of this review is to demonstrate the possible anti-leukemic effect of curcumin, thus its ability to induce apoptosis, inhibit cell proliferation, and modulate angiogenesis. Nowadays, although multiple synergistic effects have been observed and curcumin’s efficacy has been demonstrated through several in vivo and in vitro studies, further broad and exhaustive scientific research is needed to confirm the considerable results. In fact, the low bioavailability of curcumin has limited its clinical applications, a challenge that is currently being addressed through the development of nanoformulations to enhance its stability and absorption within the body. In conclusion, curcumin exhibits antitumor properties with a favorable profile, suggesting its potential as a supportive adjunct in the treatment of patients with acute myeloid leukemia. Full article

We present a tunable diode-laser absorption spectroscopy (TDLAS) system operating at 1.5711 µm for CO₂ gas concentration measurements. The system can operate in either a traditional direct-mode (dTDLAS) sawtooth wavelength scan or a recently demonstrated wavelength-toggled single laser differential-absorption lidar (WTSL-DIAL) mode using precompensated current pulses. The use of such precompensated pulses offsets the slow thermal constants of the diode laser, leading to fast toggling between ON and OFF-resonance wavelengths. A short measurement time is indeed pivotal for atmospheric sensing, where ambient factors, such as turbulence or mechanical vibrations, would otherwise deteriorate sensitivity, precision and accuracy. Having a system able to operate in both modes allows us to benchmark the novel experimental procedure against the well-established dTDLAS method. The theory behind the new WTSL-DIAL method is also expanded to include the periodicity of the current modulation, fundamental for the calculation of the OFF-resonance wavelength. A two-detector scheme is chosen to suppress the influence of laser intensity fluctuations in time (1/f noise), and its performance is eventually benchmarked against a one-detector approach. The main difference between dTDLAS and WTSL-DIAL, in terms of signal processing, lies in the fact that while the former requires time-consuming data processing, which limits the maximum update rate of the instrument, the latter allows for computationally simpler and faster concentration readings. To compare other performance metrics, the update rate was kept at 2 kHz for both methods. To analyze the dTDLAS data, a four-parameter Lorentzian fit was performed, where the fitting function comprised the six main neighboring absorption lines centered around 1.5711 µm. Similarly, the spectral overlap between the same lines was considered when analyzing the WTSL-DIAL data in real time. Our investigation shows that, for the studied time intervals, the WTSL-DIAL approach is 3.65 ± 0.04 times more precise; however, the dTDLAS-derived CO₂ concentration measurements are less subject to systematic errors, in particular pressure-induced ones. The experimental results are accompanied by a thorough explanation and discussion of the models used, as well as their advantages and limitations. Full article

Aflatoxin B₁ (AFB₁), the most potent and widespread mycotoxin produced by Aspergillus flavus and Aspergillus parasiticus, poses a significant global threat to food safety and human health, with chronic exposure strongly linked to hepatocellular carcinoma (HCC). While physical and chemical detoxification approaches exist, their limitations have led to an increased interest in biological strategies, particularly probiotic interventions. In this review, we synthesize current in vivo and clinical evidence on the ability of probiotic lactic acid bacteria—including Lactobacillus casei Shirota, Lactobacillus rhamnosus GG, Lactobacillus rhamnosus LC705, Lactococcus lactis, and selected Bifidobacterium species—to reduce AFB₁ absorption and toxicity. We summarize mechanistic insights into cell wall adsorption, gut microbiota modulation, intestinal barrier protection, and antioxidant enhancement. Clinical trials have shown reductions in AFB₁ biomarkers following probiotic supplementation, supporting their translational potential for human health. However, clinical evidence remains limited by small sample sizes, short intervention periods, and variability in endpoints. Collectively, this review consolidates mechanistic, preclinical, and clinical findings to position probiotic lactic acid bacteria as promising biological countermeasures against AFB1-induced hepatocellular carcinoma. Full article

Nitrogen (N) is the most important macro-nutrient for plant growth and development, which not only results in the highest cost in crop production but may also lead to environmental pollution. Hence, there is a need to develop N and use efficient genotypes, a prerequisite for which is a better understanding of N stress adaptation. Here, responses of two contrasting linseed accessions at the seedling stage were assessed for N stress-induced changes in twelve phenotypic traits and for gene expression profiling in the roots. The results showed that nine out of twelve phenotypic traits were affected under N stress conditions, and include total root length (TRL), root tips (RT), shoot dry weight (SDW), root dry weight (RDW), root-to-shoot ratio (R/S), plant nitrogen content (PNC), shoot nitrogen content (SNC), root nitrogen content (RNC), and nitrogen use efficiency (NUE). For example, under N stress, the TRL, RDW, SDW, PNC, SNC, and RNC showed reductions of 7.1, 7.6, 16.0, 43.7, 43.3, and 38.7%, respectively. The N-efficient (NE) genotype outperformed the N-inefficient (NI) genotype for all root and shoot traits and NUE under N stress and N normal conditions. Transcriptome analysis identified 1034 differentially expressed genes (DEGs) under the contrasting N conditions and uncovered the opposite responses of the two linseed genotypes to N starvation at the gene expression level. DEGs included 153 transcription factors distributed in 27 families, among which ERF, MYB, NAC, and WRKY were the most represented. In addition, DEGs involved in N absorption and transport, root development, amino acid transport, and antioxidant activity were found to be differentially expressed. The candidate genes identified in the current study are purported for their roles in N metabolism in other crops and might also play a pivotal role in N stress adaptation in linseed, and therefore could be useful for further detailed research on N stress response in linseed, paving the way toward developing N-efficient linseed cultivars with improved root system architecture. Full article

Background: Obesity poses a significant threat to human health and is commonly caused by excessive dietary intake. Phosphatidic acid (PA) is one of the simplest diacylglycerol phospholipids, serving as a crucial precursor for the synthesis of triglycerides and other complex phospholipids. PA is also an important intermediate product in the process of fat digestion and absorption. Studies have shown that PA has muscle-building and fat-reducing effects, but it is currently unclear whether it can combat obesity induced by a high-fat, high-sugar diet (HFD). Methods: Using a model of obesity induced by a high-fat high-sugar diet, we found that the addition of PA to food could reverse HFD-induced obesity. Results: Addition of PA to food can reverse obesity induced by a high-fat diet. Transcriptomic analysis results indicate that this reversal also takes place at the molecular level. Further analysis suggests that PA may regulate fat metabolism by reversing the PPAR signaling pathway. Conclusions: Our study provides molecular evidence for the use of PA as an effective additive in weight-loss food products. Full article

Carbon nanotubes (CNTs) have remarkable mechanical, electrical, and thermal properties, making them highly attractive as foundational elements for advanced materials. However, translating their nanoscale potential into macroscale reliability and longevity requires a holistic design approach that integrates precise architectural control with robust damage mitigation strategies. This review presents a synergistic perspective on enhancing the durability of CNT-based systems by critically examining the interplay between molecular assembly, self-repair mechanisms, and the advanced characterization techniques required for their validation. We first establish how foundational architectural control—achieved through strategies like chemical functionalization, field-directed alignment, and dispersion—governs the ultimate performance of CNT materials. A significant focus is placed on advanced functionalization, such as fluorination, and its verification using high-powered spectroscopic tools, including X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Subsequently, this manuscript delves into the mechanisms of self-repair, systematically analyzing both the intrinsic capacity of the carbon lattice to heal atomic-level defects and the extrinsic strategies that incorporate engineered healing agents into composites. This discussion is uniquely supplemented by an exploration of the experimental techniques, such as electron energy loss spectroscopy (EELS) and Auger electron spectroscopy (AES), that provide crucial evidence for irradiation-induced healing dynamics. Finally, we argue that a “characterization gap” has limited the field’s progress and highlight the critical role of techniques like in situ Raman spectroscopy for quantitatively monitoring healing efficiency at the molecular level. By identifying current challenges and future research frontiers, this review underscores that the creation of truly durable materials depends on an integrated understanding of how to build, repair, and precisely measure CNT-based systems. Full article

Inspired by natural gradient structures observed in biological systems such as lobster exoskeletons and bamboo, this study proposes a biomimetic strategy for developing advanced automotive materials that achieve an optimal balance between strength and ductility. Against this backdrop, the present work systematically reviews the design principles underlying natural gradient structures and examines the advantages and limitations of current additive manufacturing—specifically selective laser melting (AM-SLM)—as well as conventional forming and machining processes, in fabricating nature-inspired architectures. The research systematically explores hierarchical gradient designs which endow materials with superior mechanical properties, including enhanced strength, stiffness, and energy absorption capabilities. Two primary strengthening mechanisms—hetero-deformation-induced (HDI) hardening and precipitation hardening—were employed to overcome the conventional strength–ductility trade-off. Gradient-structured materials were fabricated using selective laser melting, and microstructural analyses demonstrated that controlled interface zones and tailored precipitation distribution critically influence property improvements. Based on these findings, an integrated material design strategy combining nature-inspired gradient architectures with post-processing treatments is presented, providing a versatile methodology to meet the specific performance requirements of automotive components. Overall, this work offers new insights for developing next-generation lightweight structural materials with exceptional ductility and damage tolerance and establishes a framework for translating bioinspired concepts into practical engineering solutions. Full article

Despite aggressive current therapies against glioblastoma (GB), residual tumor cells may remain at the edge of the surgical cavity after resection. These cells can rapidly proliferate, giving rise to tumor recurrence in more aggressive and drug-resistant forms. As photodynamic therapy (PDT) has advanced, it has emerged as an option to treat this brain tumor. The oncological basis of PDT involves the selective accumulation of a photosensitizer (PS) in the tumor, followed by its activation with electromagnetic radiation to generate reactive oxygen species (ROS), which induce tumor cell death. Given that first- and second-generation PSs present significant limitations, including poor tumor selectivity, suboptimal biodistribution, limited absorption within the therapeutic window, and slow systemic clearance, research has progressed toward the development of third-generation PSs based on nanotechnology to optimize their therapeutic properties. This review addresses the types of tumor cell death induced by PDT, as well as the advancements of PS design, focusing on titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles. These nanomaterials can be designed as carriers, encapsulating or conjugating conventional PSs, or act as PSs themselves, due to their favorable biocompatibility and intrinsic photoreactivity. Additionally, they can be functionalized with targeting ligands to achieve tumor-specific delivery, enhancing therapeutic selectivity while minimizing toxicity to healthy tissue. Overall, these nanotechnology-based PSs represent a versatile and promising therapeutic paradigm that warrants further investigation through basic research, supporting the development and potential clinical translation of a more precise and effective PDT-based intervention for glioblastoma, initially aimed at eliminating intra-surgical post-resection residual tumor cells. Full article

Fiber-reinforced composites (FRCs) have emerged as transformative alternatives to traditional marine construction materials, owing to their superior corrosion resistance, design flexibility, and strength-to-weight ratio. This review comprehensively examines the current state of FRC technologies in marine deck and underwater applications, with a focus on manufacturing methods, durability challenges, and future innovations. Thermoset polymer composites, particularly those with epoxy and vinyl ester matrices, continue to dominate marine applications due to their mechanical robustness and processing maturity. In contrast, thermoplastic composites such as Polyether Ether Ketone (PEEK) and Polyether Ketone Ketone (PEKK) offer advantages in recyclability and hydrothermal performance but are hindered by higher processing costs. The review evaluates the performance of various fiber types, including glass, carbon, basalt, and aramid, highlighting the trade-offs between cost, mechanical properties, and environmental resistance. Manufacturing processes such as vacuum-assisted resin transfer molding (VARTM) and automated fiber placement (AFP) enable efficient production but face limitations in scalability and in-field repair. Key durability concerns include seawater-induced degradation, moisture absorption, interfacial debonding, galvanic corrosion in FRP–metal hybrids, and biofouling. The paper also explores emerging strategies such as self-healing polymers, nano-enhanced coatings, and hybrid fiber architectures that aim to improve long-term reliability. Finally, it outlines future research directions, including the development of smart composites with embedded structural health monitoring (SHM), bio-based resin systems, and standardized certification protocols to support broader industry adoption. This review aims to guide ongoing research and development efforts toward more sustainable, high-performance marine composite systems. Full article

Liriope muscari is a medicinal and ornamental herbaceous plant with significant economic value, as its tuberous roots are used for medicinal purposes. However, the current production of medicinal plants is characterized by wasteful use of resources and ecological risks caused by the unreasonable application of nitrogen fertilizers. In this study, based on uniform application of phosphorus and potassium fertilizers, six nitrogen application levels were set in pot experiments (expressed as N): N0: 0 kg/ha, N1: 208.33 kg/ha, N2: 416.66 kg/ha, N3: 625 kg/ha, N4: 833.33 kg/ha, N5: 1041.66 kg/ha). The morphological characteristics, photosynthetic physiology, tuber yield and quality, and seven nitrogen fertilizer utilization indices of L. muscari were analyzed and measured. Correlation analysis and structural equation modeling (SEM) were employed to investigate the mechanism by which nitrogen influences its growth and development, photosynthetic characteristics, tuber yield and quality, and nitrogen fertilizer utilization efficiency. The results showed that (1) nitrogen significantly promoted plant height, crown width, tiller number, and chlorophyll synthesis, with the N3 treatment (625 kg/ha) reaching the peak value, and the crown width and tiller number increasing by 26.44% and 38.90% compared to N0; the total chlorophyll content and net photosynthetic rate increased by 39.67% and 77.04%, respectively, compared to N0; high nitrogen (N5) inhibited photosynthesis and increased intercellular CO₂ concentration; (2) Fresh weight of tuberous roots, polysaccharide content, and saponin C content peaked at N3 (34.67 g/plant, 39.89%, and 0.21%), respectively, representing increases of 128.69%, 28.37%, and 33.66% compared to N0; (3) Nitrogen uptake, nitrogen fertilizer utilization efficiency, agronomic utilization efficiency, and apparent utilization efficiency were optimal at N3, while high nitrogen (N4–N5) reduced nitrogen fertilizer efficiency by 40–60%; (4) SEM analysis indicated that tiller number and transpiration rate directly drive yield, while stomatal conductance regulates saponin C synthesis. Under the experimental conditions, 625 kg/ha is the optimal nitrogen application rate balancing yield, quality, and nitrogen efficiency. Excessive nitrogen application (>833 kg/ha) induces photosynthetic inhibition and “luxury absorption”, leading to source-sink imbalance and reduced accumulation of secondary metabolites. This study provides a theoretical basis and technical support for the precise management of nitrogen in Liriope-type medicinal plants. It is expected to alleviate the contradictions of “high input, low output, and heavy pollution” in traditional fertilization models. Full article

Atopic dermatitis (AD) remains a therapeutic challenge due to the limitations of current treatments, creating demand for safer multi-target alternatives to corticosteroids. Our integrated study establishes Hibiscus syriacus L. (H. syriacus) as a mechanistically validated solution through computational and biological validation. The fraction’s two main compounds, linoleic acid and palmitic acid, exhibit favorable drug-like properties including high lipophilicity (LogP 5.2) and 87% oral absorption. Molecular docking collectively predicts comprehensive NF-κB pathway blockade. Experimental validation showed that the fraction (100 μg/mL) inhibited LPS-induced nitric oxide (NO) by 78% and TNF-α/IFN-γ-induced reactive oxygen species (ROS) by 40%, while significantly downregulating the chemokines TARC (73%) and MDC (71%). In DNCB-induced AD mice, the treatment (200 mg/kg/day) produced a 62% improvement in clinical severity scores, reduced serum IgE by 27%, decreased transepidermal water loss by 36%, and doubled skin hydration while normalizing pH levels from the alkaline to physiological range. While both treatments reduced DNCB-induced epidermal hyperplasia, H. syriacus (62.9% reduction) restored the normal thickness without pathological thinning, a critical advantage over corticosteroids that cause atrophy. This dual-action therapeutic achieves corticosteroid-level anti-inflammatory effects while restoring skin barrier integrity to normal levels and avoiding corticosteroid-associated atrophy, positioning it as a next-generation AD treatment. Full article

Short bowel syndrome (SBS) is characterized by insufficient intestinal length to support absorption causing malnutrition. The bowel adapts to SBS via intestinal dilation and delayed gastric emptying but still often requires long-term parenteral nutrition. Current surgical options to lengthen the bowel pose significant risks and often provide limited expansion. ‘Distraction enterogenesis’ has been proposed as a technique to induce intestinal lengthening for SBS. The deployment of the intestinal expansion sleeve (IES) device is hypothesized to result in significant intestinal lengthening in vivo. A Roux-en-Y was created in the jejunum of seven rats for isolated IES deployment. The IES was precontracted over a Bucatini noodle and inserted into the isolated roux limb. After 4 weeks of deployment, rats were sacrificed, Roux-en-Y length recorded, and histology analyzed. A paired t-test was performed to compare initial and final roux limb lengths and histopathological tissue remodeling. Intestinal distraction evaluated at 4 weeks post deployment of the IES resulted in a significant 30.2% elongation in roux limb length (43.6 ± 14.4 mm to 56.4 ± 20.8 mm (p = 0.043, n = 7). IES samples showed changes in mucosal and submucosal integrity and bowel wall thickness in response to IES lengthening. In samples with partial mucosal erosion, the basal/regenerative layers of the mucosa were preserved. Distraction enterogenesis with significant intestinal lengthening in vivo has been achieved with the IES device. Histologic changes suggest all bowel functional layers and attributes are maintained through distraction enterogenesis. Future constructs of the IES may benefit from the addition of immunomodulators. Increasing intestinal mass with these devices may complement the treatment paradigm for SBS. Full article

Background/Objectives: Intestinal dysfunction during weaning in piglets causes declines in growth through hindered absorption capacity and intestinal barrier function, equating to economic losses for the porcine industry. Established strategies for mitigating these negative issues are currently lacking. Methods: We evaluated biomolecular alterations induced by weaning stress through gene expression profiling and metabolome analysis using intestinal samples collected from piglets before weaning, 1 week after weaning, and 2 weeks after weaning. Results: We identified 701 differentially expressed genes related to weaning stress, representing the enrichment of Gene Ontology and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways associated with immune response; inflammatory response; cell proliferation; cell adhesion; and carbohydrate, lipid, and calcium ion binding. In the metabolome analysis, ABC transporter; purine, pyrimidine, and Gly-Ser-Thr metabolisms; and the urea cycle were clustered as enriched KEGG pathways. Our results suggest that energy metabolism, including protein metabolism, is involved in the repair of the structural damage occurring in the intestine during weaning. Conclusions: This study highlights the importance of integrated analyses synthesizing molecular and metabolic mechanisms in elucidating complex biological responses and provides insights into markers that can be used to develop strategies for mitigating weaning stress in the porcine industry. Full article

We report the fabrication and characterization of Al-doped ZnO (AZO) optoelectronic synaptic devices based on sol–gel-derived thin films with varying Al concentrations (0~4.0 wt%). Structural and optical analyses reveal that moderate Al doping modulates the crystal orientation, optical bandgap, and defect levels of ZnO films. Notably, 2.0 wt% Al doping yields the widest bandgap (3.31 eV), stable PL emission, and uniform deep-level absorption without inducing significant lattice disorder. Synaptic performance, including learning–forgetting dynamics and persistent photoconductivity (PPC), is strongly dependent on Al concentration. The 2.0 wt% AZO device exhibits the lowest forgetting rate and longest memory retention due to optimized trap formation, particularly Al–oxygen vacancy complexes that enhance carrier lifetime. Visual memory simulations using a 3 × 3 pixel array under patterned UV illumination further confirm superior long-term memory (LTM) behavior at 2.0 wt%, with stronger excitatory postsynaptic current (EPSC) retention during repeated stimulation. These results demonstrate that precise doping control via the sol–gel method enables defect engineering in oxide-based neuromorphic devices. Our findings provide an effective strategy for designing low-cost, scalable optoelectronic synapses with tunable memory characteristics suitable for future in-sensor computing and neuromorphic vision systems. Full article

Gadolinium, a rare earth element, is increasingly released into the environment due to its widespread applications in medical imaging, industry, and agriculture. This review explores the dual role of gadolinium in plant systems, highlighting its potential benefits at subtoxic concentrations and detrimental effects at higher levels. At subtoxic doses, gadolinium can enhance plant growth, metabolism, and stress tolerance by promoting enzymatic activity and nutrient absorption. However, elevated concentrations induce oxidative stress, disrupt nutrient uptake, and impair photosynthesis, leading to cellular damage and reduced growth. The bioaccumulation of gadolinium in plant tissues raises concerns about its trophic transfer within food chains and its broader ecological impact. Current evidence suggests that previously regarded as stable and inert gadolinium complexes can degrade under environmental conditions, increasing their bioavailability and toxicity. Despite its potential for agricultural applications, including improving crop resilience, the ecological risks associated with gadolinium remain poorly understood. Addressing these risks requires coordinated efforts to optimize gadolinium usage, develop advanced waste management strategies, and enhance monitoring of its environmental presence. This review emphasizes the need for in-depth research on gadolinium interactions with plants and ecosystems to balance its industrial benefits with environmental sustainability. Full article