Search Results (441)

This study evaluated the effects of different storage conditions, varying in light exposure, relative humidity (RH), and packaging materials, on the physicochemical stability of Lobosphaera sp. biomass, the retention of bioactive compounds, and the bioactivity of its extracts. Under light and 75% RH, the biomass absorbed moisture over time, reaching 0.779 ± 0.003 g/g dry weight (DW) after three months. This was accompanied by a decline in luminosity, chroma, and hue values. In contrast, samples stored under other conditions showed minimal changes, indicating that high humidity, combined with light exposure, compromises biomass stability. Packaging in metalized polyethylene terephthalate (PETmet/PE) effectively preserved the water content, color, and carotenoid levels during a two-month storage period. Bioactive compounds extracted via hydroethanolic ultrasound-assisted extraction yielded 15.48 ± 1.35% DW. Total phenolic content (TPC) of the extracts declined over time in both PETmet/PE and low-density polyethylene (LDPE) packaging, though the decrease was less pronounced in PETmet/PE. Antioxidant activity, assessed via the ABTS assay, remained stable, regardless of storage duration or packaging. Antimicrobial activity of the extract decreased over time but remained more effective against Gram-positive bacteria (Staphylococcus aureus, Bacillus cereus, and Listeria monocytogenes), with PETmet/PE packaging better preserving antimicrobial efficacy than LDPE. These findings underscore the importance of optimized storage conditions and packaging for maintaining the quality and bioactivity of Lobosphaera sp. biomass and its extracts. Full article

Due to the increasing environmental concerns and the growing generation of electronic waste and plastic, sustainable waste management solutions are essential for the construction industry. This study explores the potential of using electronic waste toner powder (WTP) and recycled low-density polyethylene (LDPE), either individually or in combination as modifiers for asphalt binder to enhance pavement performance and reduce environmental impact. The analysis focused on three key components: (1) binder development and testing; (2) performance evaluation through Marshall stability, indirect tensile strength, and Dynamic Shear Rheometer (DSR) testing for rutting resistance; and (3) sustainability assessment in terms of carbon footprint reduction. The results revealed that the formulation of 25% WTP and 8% LDPE processed at 160 °C achieved the best mechanical performance and lowest carbon index, enhancing Marshall stability by 32% and rutting resistance by 41%. Additionally, this formulation reduced the carbon footprint by 27% compared to conventional asphalt. The study demonstrated that the combination of WTP and LDPE significantly improves the sustainability and performance of asphalt pavements, offering mechanical, environmental, and economic benefits. By providing a quantitative assessment of waste-modified asphalt, this study uniquely demonstrates the combined use of WTP and LDPE in asphalt, offering a novel dual-waste valorization approach that enhances pavement performance while promoting circular economy practices. Full article

Greenhouses have positively impacted plant production by allowing the cultivation of different crops per year. However, the accumulation of agricultural plastics, potentially contaminated with agrochemicals, raises environmental concerns. This work evaluates the combined effect of Bordeaux mixture and low-density polyethylene (LDPE) microplastics (<5 mm) on the growth of lettuce (Lactuca sativa L.) and soil microbial communities. Different levels of Bordeaux mixture (0, 100 and 500 mg kg⁻¹), equivalent to Cu(II) concentrations (0, 17 and 83 mg kg⁻¹), LDPE microplastics (0, 1% and 5%) and their combination were selected. After 28 days of growth, biometric and photosynthetic parameters, Cu uptake, and soil microbial responses were evaluated. Plant germination and growth were not significantly affected by the combination of Cu and plastics. However, individual Cu treatments influenced root and shoot length and biomass. Chlorophyll and carotenoid concentrations increased with Cu addition, although the differences were not statistically significant. Phospholipid fatty acid (PLFA) analysis revealed a reduction in microbial biomass at the highest Cu dose, whereas LDPE alone showed limited effects and may reduce Cu bioavailability. These results suggest that even at the highest concentration added, Cu can act as a plant nutrient, while the combination of Cu–plastics showed varying effects on plant growth and soil microbial communities. Full article

The effect of annealing on the microstructure and tensile properties of low-density polyethylene (LDPE) non-woven fabric produced by melt electrospinning was systematically investigated using DSC, SAXS, SEM, etc. The results showed that, above an annealing temperature of 80 $°\mathrm{C}$, both the main melting point and crystallinity of LDPE decreased compared to the original sample, as did the tensile strength of the non-woven fabric. Additionally, the lamellar distribution became broader at annealing temperatures above 80 $°\mathrm{C}$. The recrystallization mechanism of molten lamellae (disordered chains) in LDPE was elucidated by fitting the data using a Gaussian function. It was found that secondary crystallization, forming thicker lamellae, and spontaneous crystallization, forming thinner lamellae, occurred simultaneously at rates dependent on the annealing temperature. Secondary crystallization dominated at temperatures ≤80 $°\mathrm{C}$, whereas spontaneous crystallization prevailed at temperatures above 80 $°\mathrm{C}$. These findings explain the observed changes in the microstructure and tensile properties of the LDPE non-woven fabric. Furthermore, a physical model describing the microstructural evolution of the LDPE non-woven fabric during annealing was proposed based on the experimental evidence. Full article

Microplastic (MP) pollution is an emerging concern in ruminant production, as animals are exposed to MPs through air, water, and feeds. Ruminants play a key role in MP transmission to humans via animal products and contribute to MP return to agricultural soil through excreta. Identifying effective strategies to mitigate MP pollution in the ruminant sector is crucial. A promising yet understudied approach involves the potential ability of rumen microbiota to degrade MPs. This study investigated the in vitro ruminal degradation of three widely distributed MPs—low-density polyethylene (LDPE), polyethylene terephthalate (PET), and polyamide (PA)—over 24, 48, and 72 h. PET MP exhibited the highest degradation rates (24 h: 0.50 ± 0.070%; 48 h: 0.73 ± 0.057%; and 72 h: 0.96 ± 0.082%), followed by LDPE MP (24 h: 0.03 ± 0.020%; 48 h: 0.25 ± 0.053%; and 72 h: 0.56 ± 0.066%) and PA MP (24 h: 0.10 ± 0.045%; 48 h: 0.02 ± 0.015%; and 72 h: 0.14 ± 0.067%). These findings suggest that the ruminal environment could serve as a promising tool for LDPE, PET, and PA MPs degradation. Further research is needed to elucidate the mechanisms involved, potentially enhancing ruminants’ natural capacity to degrade MPs. Full article

Heavy metal contamination in natural waters and soils poses a significant environmental challenge, necessitating efficient and sustainable water treatment solutions. This study presents the computational design of low-density polyethylene (LDPE) films functionalized with iron oxide (Fe₃O₄) nanoparticles (NPs) for enhanced water purification applications. Composite materials containing 5%, 10%, and 15% were synthesized and characterized in terms of adsorption efficiency, surface morphology, and reusability. Advanced molecular modeling using BIOVIA Pipeline was employed to investigate charge distribution, functional group behaviour, and atomic-scale interactions between polymer chains and metal ions. The computational results revealed structure–property relationships crucial for optimizing adsorption performance and understanding geochemically driven interaction mechanisms. The LDPE/Fe₃O₄ composites demonstrated significant removal efficiency of Cu²⁺ and Ni²⁺ ions, along with favourable mechanical properties and regeneration potential. These findings highlight the synergistic role of mineral–polymer interfaces in water remediation, presenting a scalable approach to designing multifunctional polymeric materials for environmental applications. This study contributes to the growing field of polymer-based adsorbents, reinforcing their value in sustainable water treatment technologies and environmental protection efforts. Full article

Sweet cherry (Prunus avium L.) is becoming increasingly popular in China, but its postharvest quality deteriorates significantly during harvest storage and transport. Here, we investigated the efficiency of different modified atmosphere packaging (MAP) treatments on the quality and physiology of ‘Meizao’ sweet cherry during 60 days of cold storage (0 ± 0.5 °C). Fruits were sealed in four types of MAP low-density polyethylene (LDPE) liners (PE20, PE30, PE40, and PE50), with unsealed 20 μm LDPE packaging bags used as the control. Our findings demonstrated that PE30 packaging established an optimal gas composition (7.0~7.7% O₂ and 3.6~3.9% CO₂) that effectively preserved ‘Meizao’ sweet cherry quality. It maintained the fruit color, firmness, soluble solid content (SSC), titratable acidity (TA), and vitamin C (Vc) content while simultaneously delaying deteriorative processes such as weight loss, pedicel browning, and fruit decay. These results indicate that PE30 was the most suitable treatment for preserving the quality of ‘Meizao’ sweet cherries during cold storage. Furthermore, physiological research showed that significant inhibition of respiration rate was achieved by PE30, accompanied by maintained activities of antioxidant enzymes (CAT, POD, and SOD), which consequently led to reduced accumulations of ethanol and malondialdehyde (MDA) during cold storage. To date, no systematic studies have investigated the physiological and biochemical responses of ‘Meizao’ to different thickness-dependent LDPE-MAP conditions. These observations highlight the power of the optimized PE30 packaging as an effective method for extending the fruit storage life, delaying postharvest senescence, and maintaining fruit quality of ‘Meizao’ sweet cherry. Full article

In this study, we comprehensively compare electrical conduction behavior under an applied electric field and electrical conductivity variation with temperature in low-density polyethylene (LDPE)/CNT composites with different dispersions and covalent functionalizations. Composites with different dispersions were prepared using solution and melt mixing processes. The solution-mixed composites exhibited better dispersion and higher electrical conductivity compared to the melt-mixed composites. At a high critical content (beyond the percolation threshold), the current–voltage (I–V) curve of the solution-mixed composites exhibited linear conduction behavior due to the formation of a continuous conductive network. In contrast, the melt-mixed composites exhibited nonlinear conduction behavior, with the conductive mechanism attributed to the field emission effect caused by poor interfacial contact between the CNTs. Additionally, LDPE/CNT-carboxyl (LDPE/CNT-COOH) and LDPE/CNT-hydroxy (LDPE/CNT-OH) composites demonstrated better dispersion but displayed lower electrical conductivity and similar nonlinear conduction behavior when compared to unmodified ones. This is attributed to the surface defects caused by the modification process, which lead to an increased energy barrier and a decreased transition frequency in the field emission effect. Furthermore, the temperature-dependent electrical conductivity results indicate that the variation trend in current with temperature differed among LDPE/CNT composites with different dispersions and covalent functionalizations. These differences were mainly influenced by the gap width between CNTs (mainly affected by dispersion and aspect ratio of CNTs), as well as the electrical conductivity of CNTs (mainly influenced by surface modification and intrinsic electrical conductivity of CNTs). Full article

The shelf life of minimally processed fresh (MPF) pears is affected by raw material characteristics and production factors. This study evaluated the effect of raw material storage (3 months in regular atmosphere [RA], 3 and 6 months in controlled atmosphere [CA]) on the organoleptic and functional quality of MPF pears packaged in polypropylene (PP) and low-density polyethylene (LDPE) for 0, 10, and 15 days at 0 °C. Wedges from 3-month CA showed the lowest respiratory activity (about 8.31 mg CO₂ kg⁻¹ h⁻¹), and those from 6-mounth CA maintained higher firmness after 15 days. Lightness decreased during storage, less so in harvest samples, which also showed less browning. Nevertheless, polyphenol oxidase (PPO) activity increased fivefold after 15 days. Total polyphenol content decreased by about 50% during storage. Wedges in PP packaging exhibited higher total antioxidant capacity (TAC) measured by DPPH than those in LDPE (15.55 and 13.77 mg EAA 100 g⁻¹ FW, respectively). In both, the contents were reduced after 15 days (15–38%). No differences in TAC were observed in the FRAP assay, where values remained unchanged. Significant correlations between PPO activity, TAC, and color variables suggest ongoing oxidative processes. In contrast to the effect of raw material storage, the type of packaging did not significantly affect any of the measured variables. Full article

Plastic pollution poses significant environmental challenges due to its persistence and contribution to the microplastic formation, with polyethylene being among the materials more abundantly found. Understanding how different artificial weathering protocols influence the degradation of plastics is crucial for assessing their environmental impact. This study investigates the effects of three distinct artificial weathering protocols—continuous UV-A irradiation (M_L), cyclic UV-dark exposure (M_C[L→D]), and sequential UV-dark phase (M_L→D)—on the physicochemical properties of plastics, using oxo-low-density polyethylene as the model material. Surface oxidation, measured by quantification of the carbonyl index, was most pronounced under the M_C[L→D] protocol despite the shortest time of overall UV exposure, indicating that oxidative reactions continue during the dark phases. Vinyl group formation, however, required continuous or cyclic UV exposure, highlighting the critical role of light in this chemical process. Alterations in the surface hydrophilicity, measured by contact angle, and changes in molecular weight were quantified and found to closely link to the weathering conditions, with increased oxidations enhancing the surface hydrophilicity and the chain scission balanced by crosslinking with extended UV durations. These findings emphasize the importance of weathering protocols when trying to simulate conditions in the lab that are closer to the ones in the environment to understand plastic degradation mechanisms. Biodegradation experiments with Rhodococcus rhodochrous demonstrated that weathered oxo-LDPE samples with higher surface oxidation levels (ΔCI > 1) supported an increased CO₂ production by Rhodococcus rhodochrous, with the M_C[L→D]—360 h protocol yielding the highest biodegradation rates—31–43% higher than the control. Full article

The growing demand for sustainable materials has driven significant interest in composites reinforced with organic fibers, due to their mechanical performance, availability, and reduced environmental impact. This study investigates the mechanical behavior of two composite configurations: a cross-woven fabric and a sandwich-type panel, both made from totora (Schoenoplectus californicus) and low-density polyethylene–aluminum (LDPE–Al). Our experimental results show that the cross-woven variant achieved higher impact resistance (2.51 J), tensile strength (5.82 MPa), and greater deformation capacity (6.76%), making it more suitable for applications requiring energy absorption and flexibility, such as interior cladding and modular furniture. In contrast, the sandwich configuration exhibited superior stiffness (910 MPa), favoring structural panels and low-load roofing uses. This research distinguishes itself by integrating biodegradable totora fibers with recycled LDPE–Al to fabricate sustainable construction components, advancing circular economy principles while addressing limitations in previous composite formulations through improved mechanical balance and application-specific performance. Full article

Due to the growing consumption of plastic and rubber products, effective waste management solutions are crucial. This study evaluates the use of crumb rubber (CR), low-density polyethylene (LDPE), and their combination (CR+LDPE), as asphalt binder modifiers for improving pavement performance and sustainability. The analyses covered two critical pavement layers: the wearing surface (WS) and the treated base (TB). The methodology included (1) Binder Development and Testing; (2) Superpave Mix Design; (3) mechanical testing, including Indirect Tensile Strength Testing and Semi-Circular Bending Testing; (4) life cycle cost analysis; and (5) carbon footprint analysis. The results revealed that CR+LDPE significantly enhanced the fatigue resistance of the TB mixes, with a fracture energy increase of 47%, and increased the flexibility index by 53% in the WS. CR increased the flexibility index by about 146% in the TB layer, while LDPE increased the fracture energy by 21% in the WS layer. The life cycle cost analysis demonstrated that using LDPE, CR, and CR+LDPE reduced the life cycle costs by about 16% in the WS layer. Meanwhile, the life cycle carbon footprint analysis showed that using LDPE and CR+LDPE reduced the carbon footprint by about 87% and 81% for the TB and WS layers, respectively. The study findings highlight the mechanical, economic, and environmental benefits of incorporating wastes into asphalt pavements. Full article

Microplastic (MP) particles are ubiquitous in the environment and pose a growing threat to ecosystem stability. As concern over their ecological impact increases, biotests and ecotoxicological approaches using plant species have become valuable tools for research. This study aimed to evaluate the effects of varying concentrations of low-density polyethylene (LDPE) MP on seed germination, root development, and shoot growth of white mustard (Sinapis alba L.) under controlled laboratory and pot experiment conditions. For the seven-day laboratory experiment, concentrations of 0.01% and 1% w/w were used, whereas concentrations of 1% and 5% w/w were applied in the ten-day pot experiment. Results indicated no statistically significant effects of LDPE MP on germination rate or germination speed index (GSI) in either setting. However, shoot length data suggest that the 5% LDPE treatment may have a slight stimulatory effect compared to the control, though this trend was marginally significant. These findings highlight the complex and context-dependent nature of MP–plant interactions. Further research is needed to better understand the mechanisms driving these responses and to support the development of mitigation strategies for MP contamination in terrestrial ecosystems. Full article

The development of antimicrobial and antioxidant packaging materials is critical for improving food safety and extending shelf life. This study aimed to design and characterize low-density polyethylene (LDPE) and poly(ethylene-co-vinyl acetate) (EVA) films incorporating organically modified montmorillonite (OMt) nanocarriers loaded with carvacrol (C) and thymol (T) essential oil components. The incorporation of carvacrol and thymol into OMt was conducted through an evaporation/adsorption method without the use of organic solvents. In the next step, LDPE, EVA and OMtC or OMtT were melt-compounded in order to obtain films. Characterization of the bioactive nanocarriers and films was performed through X-ray diffraction (XRD), tensile testing, oxygen permeability measurements (OTR) and antioxidant assays. Films LDPE/EVA/OMtC and LDPE/EVA/OMtT showed improved mechanical strength and antioxidant activity, with IC₅₀ values between 0.32 and 0.52 mg/mL. Film with component weight ratio LDPE/EVA/OMtC equal to 80/10/10 also demonstrated enhanced barrier properties and significantly inhibited fungal growth on baguette bread for up to 60 days. These findings highlight the potential of these bioactive films to improve the microbial safety and shelf life of bakery products. Full article

The main problem with the conventional plastics presently used is that they are too slow to degrade, and thus, accumulate in the natural environment. This situation occurs on farmlands because low-density polyethylene (LDPE) is widely used in agriculture. Different authors propose employing biodegradable plastics (bioplastics) to solve this problem, and the most studied and promising candidates are poly(hydroxybutyrate) acid (PHB) and poly(lactic) acid (PLA). This work centers on the short-term evaluation of the biodegradability of the three above-mentioned plastic materials in soil type Mediterranean Alfisol and the effect of adding organic amendment (cow manure; CM) on their biodegradation. Two experiments were run for each plastic material: one without this organic amendment and the other by adding CM. Their biodegradation was determined by the procedure described in Standard ISO 17556. The results confirm that PHB is a highly biodegradable polymer, whereas the biodegradability of PLA and LDPE is poor. Using CM did not facilitate plastic polymer biodegradation in our soil. The nature and properties of soil can significantly impact plastics biodegradation. Bioplastics are still not the panacea to solve the plastics pollution problem, so other management options must be considered, such as prevention, reduction, and/or reuse in situ. Full article