Search Results (7)

Electric potential controlled lubrication, also known as triboelectrochemistry or electrotunable tribology, is an emerging field to regulate the friction, wear, and lubrication performance under charge distribution on the solid–liquid interfaces through an applied electric potential, allowing to achieve superlubrication. Electric potential controlled lubrication is of great significance for smart tunable lubrication, micro-electro-mechanical systems (MEMS), and key components in high-end mechanical equipment such as gears and bearings, etc. However, there needs to be a more theoretical understanding of the electric potential controlled lubrication between micro- and macro-scale conditions. For example, the synergistic contribution of the adsorption/desorption process and the electrochemical reaction process has not been well understood, and there exists a significant gap between the theoretical research and applications of electric potential controlled lubrication. Here, we provide an overview of this emerging field, from introducing its theoretical background to the advantages and characteristics of different experimental configurations (including universal mechanical tribometers, atomic force microscopes, and surface force apparatus/balances) for electric potential controlled lubrication. Next, we review the main experimental achievements in the performance and mechanisms of electrotunable lubrication, especially using ionic lubricants, including electrolyte solutions, ionic liquids, and surfactants. This review aims to survey the literature on electric potential controlled lubrication and provide insights into the design of superlubricants and intelligent lubrication systems for various applications. Full article

This work studied the influence of the voltage parameters on the friction and superlubricity performances of LiPF₆-based ionic liquids (ILs). The results show that the voltage direction and magnitude greatly affected the friction performances of ILs and that macroscale superlubricity can be achieved with a stimulation of −0.1 V. The surface analysis and experiment results indicate that the voltage magnitude influences the coefficient of friction (COF) by determining the types of substances in the tribochemical film formed on the ball, while the voltage direction influences the COF by affecting the adsorption behavior of Li(PEG)⁺ ions on the ball. At −0.1 V, the cation group Li(PEG)⁺ adsorption film and FeOOH-containing tribochemical film contribute to friction reduction. The formation of Fe_xO_y within the tribochemical film results in an increase in friction at −0.8 V. The limited adsorption of Li(PEG)⁺ ions and the formation of Fe_xO_y contribute to the elevated COF at +0.1 V. This work proves that the friction performances of LiPF₆-based ILs could be affected by voltage parameters. A lubrication model was proposed hoping to provide a basic understanding of the lubrication mechanisms of ILs in the electric environment. Full article

Structural superlubricity refers to the lubrication state in which the friction between two crystalline surfaces in incommensurate contact is nearly zero; this has become an important branch in recent tribological research. Two-dimensional (2D) materials with structural superlubricity such as graphene, MoS₂, h-BN, and alike, which possess unique layered structures and excellent friction behavior, will bring significant advances in the development of high-performance microelectromechanical systems (MEMS), as well as in space exploration, space transportation, precision manufacturing, and high-end equipment. Herein, the review mainly introduces the tribological properties of structural superlubricity among typical 2D layered materials and summarizes in detail the underlying mechanisms responsible for superlubricity on sliding surfaces and the influencing factors including the size and layer effect, elasticity effect, moiré superlattice, edge effect, and other external factors like normal load, velocity, and temperature, etc. Finally, the difficulties in achieving robust superlubricity from micro to macroscale were focused on, and the prospects and suggestions were discussed. Full article

The novel proposal of Wang’s triboelectric nanogenerator (TENG) has inspired extensive efforts to explore energy harvesting devices from the living environment for the upcoming low-carbon society. The inevitable friction and wear problems of the tribolayer materials become one of the biggest obstacles for attaining high-performance TENGs. To achieve super-low friction electrification of the TENGs, the tribological and electrical behaviors of the sliding-mode TENGs based on polytetrafluoroethylene (PTFE) films and metallic balls under both dry friction and liquid lubrication conditions were investigated by using a customized testing platform with a ball-on-flat configuration. Most interestingly, a super-low friction coefficient of 0.008 was achieved under graphene-doped silicone oil lubrication. The corresponding wear rate of the PTFE film was drastically decreased to 8.19 × 10⁻⁵ mm³/Nm. Simultaneously, the output short-circuit current and open-circuit voltage were enhanced by 6.8 times and 3.0 times, respectively, compared to the dry friction condition. The outstanding triboelectrical performances of the PTFE film when sliding against a steel ball are attributed to the synergistic lubricating effects of the silicone oil and the graphene nanosheets. The current research provides valuable insights into achieving the macro-scale superlubricity of the TENGs in practical industrial applications. Full article

This review paper provides a comprehensive overview of the phenomenon of superlubricity, its associated material characteristics, and its potential applications. Superlubricity, the state of near-zero friction between two surfaces, presents significant potential for enhancing the efficiency of mechanical systems, thus attracting significant attention in both academic and industrial realms. We explore the atomic/molecular structures that enable this characteristic and discuss notable superlubric materials, including graphite, diamond-like carbon, and advanced engineering composites. The review further elaborates on the methods of achieving superlubricity at both nanoscale and macroscale levels, highlighting the influence of environmental conditions. We also discuss superlubricity’s applications, ranging from mechanical systems to energy conservation and biomedical applications. Despite the promising potential, the realization of superlubricity is laden with challenges. We address these technical difficulties, specifically those related to achieving and maintaining superlubricity, and the issues encountered in scaling up for industrial applications. The paper also underscores the sustainability concerns associated with superlubricity and proposes potential solutions. We conclude with a discussion of the possible future research directions and the impact of technological innovations in this field. This review thus provides a valuable resource for researchers and industry professionals engaged in the development and application of superlubric materials. Full article

In the present work, Black Phosphorus Quantum Dots (BPQDs) were synthesized via sonication-assisted liquid-phase exfoliation. The average size of the BPQDs was 3.3 ± 0.85 nm. The BPQDs exhibited excellent dispersion stability in ultrapure water. Macroscale superlubricity was realized with the unmodified BPQDs on rough Si₃N₄/SiO₂ interfaces. A minimum coefficient of friction (COF) of 0.0022 was achieved at the concentration of 0.015 wt%. In addition, the glycerol was introduced to promote the stability of the superlubricity state. The COF of the BPQDs-Glycerol aqueous solution (BG_aq) was 83.75% lower than that of the Glycerol aqueous solution (G_aq). Based on the above analysis, the lubrication model was presented. The hydrogen-bonded network and silica gel layer were formed on the friction interface, which played a major role in the realization of macroscale superlubricity. In addition, the adsorption water layer could also prevent the worn surfaces from making contact with each other. Moreover, the synergistic effect between BPQDs and glycerol could significantly decrease the COF and maintain the superlubricity state. The findings theoretically support the realization of macroscale superlubricity with unmodified BPQDs as a water-based lubrication additive. Full article

In this study, graphene oxide (GO) nanoflakes and lithium salt (LiPF₆) were utilized as lubrication additives in ether bond−containing dihydric alcohol aqueous solutions (DA(aq)) to improve lubrication performances. The apparent friction reduction and superlubricity were realized at the Si₃N₄/sapphire interface. The conditions and laws for superlubricity realization have been concluded. The underlying mechanism was the synergy effect of GO and LiPF₆. It was proven that a GO adsorption layer was formed at the interface, which caused the shearing interface to transfer from solid asperities to GO interlayers (weak interlayer interactions), resulting in friction reduction and superlubricity realization. In addition to the GO adsorption layer, a boundary layer containing phosphates and fluorides was formed by tribochemical reactions of LiPF₆ and was conducive to low friction. Additionally, a fluid layer contributed to friction reduction as well. This work proved that GO−family materials are promising for friction reduction, and provided new insights into realizing liquid superlubricity at macroscale by combining GO with other materials. Full article