Search Results (25)

Background: The behavior of soft tissues following recession type 1 (RT1) and/or non-carious cervical lesions (NCCLs) treated with class V restorations is not well understood. These conditions cause both functional and esthetic issues. Recent studies show that increased cervical thickness can influence gingival tissue response. This suggests that restoration design has a key impact. This study aims to evaluate the effect of tooth shape modification on gingival tissue response and periodontal health with 3D analysis. Methods: Seven patients with buccal gingival recession and NCCL were selected, resulting in 50 treated teeth. Patients underwent class V buccal restorations using the BOVR technique. Three-dimensional evaluation through scanned dental impressions was performed at baseline and at T1 to monitor tissue profile changes in the buccal zenith sagittal plane. The average observation period was 4 months. Following the assessment, linear measurements were calculated according to standard planes. These measurements aimed to monitor transverse and axial tissue modifications. Probing depth, plaque index, and bleeding index were also recorded. Results: Increased tooth thickness led to tissue alteration. Greater composite thickness was significantly associated with an increase in tissue thickness (p ≤ 0.001) and gingival creeping (p ≤ 0.001) at the free gingival margin. Periodontal health remained unaffected, and 50% of the teeth required no additional surgical treatment due to satisfactory outcomes. Conclusions: Class V restorations that increase cervical thickness may promote soft tissue volume gain over a 4-month period without compromising periodontal health. A 4-month observation period is recommended before considering the surgical correction. Full article

Background/Objectives: This double-blinded study aimed to evaluate the clinical performance of a giomer restorative material in comparison to a nanotechnology-based restorative system for the restoration of non-carious cervical lesions over a period of 48 months. Methods: A 48-month randomized, controlled, split-mouth trial was conducted with 49 subjects at its baseline, which was reduced to 34 subjects at follow-up, yielding a statistical power of 69.55%. Cervical lesions were restored using either BEAUTIFIL II LS (BL) or 3M/ESPE Filtek Supreme Universal Restorative (FS). Clinical assessments were performed by blinded examiners, excluding the one who placed the restorations. Evaluations were based on the Hickel criteria, covering esthetic, functional, and biological properties, with comparisons made using the Wilcoxon signed-rank test. Results: Hickel scores were analyzed with the Mann–Whitney U test to compare BL and FS groups within subjects. Changes in median Hickel scores, sensitivity, and the gingival index were assessed via Friedman’s test, followed by Wilcoxon signed-rank tests with a Bonferroni correction for post-hoc comparisons. The p-values under 0.05 were considered significant, except with the Bonferroni correction. Statistical analysis showed no significant differences between materials across most Hickel parameters (p > 0.05), though BL exhibited a trend of better surface staining (76.5% excellent with BL vs. 76.5% excellent with FS) and adjacent mucosa, while FS showed slight advantages in surface luster and color match. Conclusions: The clinical evaluation of restorations for non-carious cervical lesions using giomer and nanotechnology-based restorative systems revealed no statistically significant differences according to the Hickel criteria, indicating a similar clinical performance for both restorative materials. Full article

Peptide-based biomimetic treatments have gained increased attention in the dental field due to their biocompatibility and minimally invasive qualities. These biomimetic approaches can replicate the native architecture of dental tissues, thus contributing to higher success rates and improved longevity of restorations. The aim of this study was first to examine the biocompatibility and stability of an amelogenin peptide-based chitosan hydrogel (P26-CS) against salivary enzymes. Second, we aimed to evaluate its efficacy in biomimetically repairing human dental lesions in situ. White spot lesions (WSLs) in enamel and non-carious cervical lesions (NCCLs) in dentin were artificially created. Chitosan (CS) improved peptide stability, while remineralization of enamel sections with P26-CS was not impeded by salivary enzymes. The peptide was not cytotoxic, irritating, or sensitizing. Fluorescently labeled P26-CS penetrated ~300 μm into the enamel of WSLs and ~100 μm into the dentin of NCCLs. After peptide treatment, quantitative light-induced fluorescence (QLF) and microcomputed tomography (μCT) indicated a gain in mineral density of WSLs. In NCCLs, scanning electron microscopy showed that the dentin was covered by a mineral layer of needle-shaped crystals. Our results show that the repair of artificial WSLs and NCCLs was achieved by P26 peptide-guided remineralization and demonstrate its potential to repair dental lesions. Full article

Background and objective: The aim of this randomized split-mouth study-controlled clinical trial was to compare the 2-year clinical performance of resin composite restorations placed at non-caries cervical lesions (NCCL) with one-step self-etch, total-etch, and selective enamel etch and self-etch adhesive techniques. Materials and methods: Thirty-two patients received three resin composite restorations each at NCCLs (Tetric EvoCeram/Ivoclar/Vivadent), bonded with a total-etch adhesive agent (ExciTE F/Ivoclar/Vivadent) and a self-etch (AdheSE One F/Ivoclar/Vivadent) without and with selective enamel etching. All restorations were evaluated by two examiners at baseline, 6-, 12-, 18-, and 24-months with FDI clinical criteria (post-operation regarding retention, caries occurrence, marginal adaptation, and marginal staining). A logistic regression analysis, a Cohen’s kappa statistic, a multifactorial analysis, and X² were performed with generalized estimating equations. Results: After 2 years, the retention rate was 86.8% for total etch, 92.26% for self-etch, and 93.63% for selective enamel etching and self-etch. No caries was detected on the restorations. Concerning marginal adaptation, the clinically perfect restorations were 26.9% for the total-etch technique, 16% for self-etch, and 25.9% for selective enamel etch and self-etch. The logistic regression model revealed that only time reduced the probability of perfect marginal adaptation. Conclusions: All three adhesive strategies provided restorations with no significant differences in the retention rate or marginal adaptation, whereas the total etch yielded better performance for marginal staining. All restorations were assessed as clinically acceptable after 2 years. Full article

The aim of this umbrella review was to evaluate the longevity of glass ionomer cement (GIC) as a restorative material for primary and permanent teeth. Research in the literature was conducted in three databases (MedLine/PubMed, Web of Science, and Scopus). The inclusion criteria were: (1) to be a systematic review of clinical trials that (2) evaluated the clinical longevity of GICs as a restorative material in primary and/or permanent teeth; the exclusion criteria were: (1) not being a systematic review of clinical trials; (2) not evaluating longevity/clinical performance of GICs as a restorative material; and (3) studies of dental restorative materials in teeth with enamel alterations, root caries, and non-carious cervical lesions. Twenty-four eligible articles were identified, and 13 were included. The follow-up periods ranged from 6 months to 6 years. Different types of GICs were evaluated in the included studies: resin-modified glass ionomer cement (RMGIC), compomers, and low- and high-viscosity glass ionomer cement. Some studies compared amalgam and composite resins to GICs regarding longevity/clinical performance. Analyzing the AMSTAR-2 results, none of the articles had positive criteria in all the evaluated requisites, and none of the articles had an a priori design. The criteria considered for the analysis of the risk of bias of the included studies were evaluated through the ROBIS tool, and the results of this analysis showed that seven studies had a low risk of bias; three studies had positive results in all criteria except for one criterion of unclear risk; and two studies showed a high risk of bias. GRADE tool was used to determine the quality of evidence; for the degree of recommendations, all studies were classified as Class II, meaning there was still conflicting evidence on the clinical performance/longevity of GICs and their recommendations compared to other materials. The level of evidence was classified as Level B, meaning that the data were obtained from less robust meta-analyses and single randomized clinical trials. To the best of our knowledge, this is the first umbrella review approaching GIC in permanent teeth. GICs are a good choice in both dentitions, but primary dentition presents more evidence, especially regarding the atraumatic restorative treatment (ART) technique. Within the limitation of this study, it is still questionable if GIC is a good restorative material in the medium/long term for permanent and primary dentition. Many of the included studies presented a high risk of bias and low quality. The techniques, type of GIC, type of cavity, and operator experience highly influence clinical performance. Thus, clinical decision-making should be based on the dental practitioner’s ability, each case analysis, and the patient’s wishes. More evidence is needed to determine which is the best material for definitive restorations in permanent and primary dentition. Full article

The effectiveness of a universal adhesive applied in three application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA) over 36 months. In 50 patients, three (n = 21) or four (n = 29) non-carious cervical lesions (NCCL) were restored with Venus^® Diamond Flow (Kulzer GmbH, Hanau, Germany). The adhesive iBond^® Universal (iBU, Kulzer, Germany) was used in self-etch (SE), etch-and-rinse (ER), or selective-enamel-etch mode (SEE). The etch-and-rinse adhesive OptiBond^TM FL served as a control (OFL, Kerr GmbH, Herzogenrath, Germany). The restorations were clinically assessed (FDI criteria) at 14 days (BL), 6, 12, 24, and 36 months. Additionally, QMA was conducted on all restorations of 11 randomly selected patients. FDI criteria and marginal gap and perfect margin were compared between and within groups and recalls using McNemar, Wilcoxon, or Mann–Whitney U-tests (α = 0.05). Starting with 12 months, cumulative failure rates were lower in iBU-SE (0.0%, p = 0.016) and iBU-ER groups (2.1%, p = 0.07) compared to OFL (16.7%). At two years, iBU-SEE also showed fewer failures (0.0% SEE vs. 34.6% OFL, p = 0.016), as did iBU-SE compared to iBU-ER after 36 months (2.2 and 19.6%, p = 0.039). From BL, the iBU-SEE group always had the fewest marginal gaps and the highest percentage of perfect margins. From BL, iBU-SEE (0%, p = 0.008) and iBU-ER (0.2%, p = 0.027) showed significantly fewer marginal gaps compared to OFL (2.5%) and more perfect margins were found with iBU-SEE starting at 6 months (p = 0.054). The SEE and ER modes ensured the most excellent marginal quality, with differences from the control appearing earlier with QMA than clinically. In restoring NCCls, iBU showed superior clinical performance over OFL, especially in modes SE and SEE. Full article

Non-carious cervical lesions (NCCLs) represent a form of tooth wear, characterized by the irreversible loss of dental hard tissues at the enamel–cement junction, without the involvement of caries and dental trauma. The aim of this study was to highlight the morphological elements of NCCLs via their stereomicroscopic examination and to confirm the role of this examination in the diagnosis of early lesions. In addition, the association between the morphological aspects identified during the stereomicroscopic examination of NCCLs and their etiological factors was determined. For this study, extracted teeth with NCCLs were examined with a stereomicroscope. The morphological aspects of NCCLs were evaluated at magnifications up to 75×. In wedge-shaped NCCLs, the stereomicroscopic examination allowed the identification and measurement of scratches, furrows and cracks. In saucer-shaped NCCLs, the stereomicroscopic examination highlighted the smooth appearance of the walls. The presented study highlighted the role of stereomicroscopic examination in the assessment of NCCL morphology and in their early diagnosis. The study confirmed, in particular, the role of occlusal overloads and tooth brushing in determining the morphology of NCCLs. Full article

This scoping review aims to evaluate methods of conservative reconstruction of dental enamel lesions resulting from abrasions and evaluate the effect of diode laser in reducing the symptoms of tooth sensitivity. The cementoenamel junction is more prone to substance loss because the enamel thickness is substantially decreased, resulting in a much weaker enamel–dentin bond. Methods: Dental abrasion was examined in the mechanical cause alone. Pubmed, Scopus, and Web of Science were used to discover publications that matched our topic from 1 January 2018 to 20 March 2023. A comparison of various non-carious cervical lesion (NCCL) restoration treatments was generated mostly by mechanical considerations. Results: A final number of 11 clinical trials and randomized controlled trials were included in the review for qualitative analysis. Composite resins performed well in clinical trials for the restoration of NCCLs. Conclusions: Composite, in its different forms of filling and consistency, preceded by the use of adhesives, is an efficient and effective material for the treatment of NCCLs. Diode laser use prior to NCCL restoration of teeth does not diminish restoration retention rate, may lessen hypersensitivity, and may affect restoration success. Full article

Non-carious cervical lesions (NCCLs) are considered the irreversible losses of dental hard tissues at the cemento–enamel junction, in the absence of acute trauma and dental caries. The aim of this study was to highlight the presence of NCCLs in cervical areas based on specific macroscopic aspects in order to establish their clinical form, size and location and to confirm the role of optical coherence tomography (OCT) examination in the early diagnosis of these lesions. For this study, 52 extracted teeth were used, which did not have endodontic treatments, fillings or carious lesions in the cervical area. All teeth were examined macroscopically and OCT was used to evaluate the degree of occlusal wear, the presence and clinical form of NCCLs. Most NCCLs were identified on the buccal surfaces of the premolars. The most frequently encountered clinical form was the wedge-shaped form, with a radicular location. NCCLs present most frequently in the wedge-shaped form. Teeth that presented several NCCLs were identified. The OCT examination is an adjunct method to evaluate the clinical forms of NCCL. Full article

An esthetically pleasing smile is a valuable aspect of physical appearance and plays a significant role in social interaction. Achieving the perfect balance between extraoral and intraoral tissues is essential for a harmonious and attractive smile. However, certain intraoral deficiencies, such as non-carious cervical lesions and gingival recession, can severely compromise the overall aesthetics, particularly in the anterior zone. Addressing such conditions requires careful planning and meticulous execution of both surgical and restorative procedures. This interdisciplinary clinical report presents a complex case of a patient with esthetic complaints related to asymmetric anterior gingival architecture and severely discolored and eroded maxillary anterior teeth. The patient was treated using a combination of minimally invasive ceramic veneers and plastic mucogingival surgery, resulting in a successful outcome. The report emphasizes the potential of this approach in achieving optimal esthetic results in challenging cases, highlighting the importance of an interdisciplinary team approach in achieving a harmonious balance between dental and soft tissue aesthetics. Full article

The effectiveness of a universal adhesive applied in different application modes for the preparation of Class V composite restorations was evaluated both clinically and by quantitative marginal analysis (QMA). In each of the 22 patients, four non-carious cervical lesions (NCCL) were restored with Filtek^™ Supreme XTE (3M). The adhesive Scotchbond^™ Universal (SBU, 3M) was applied in self-etch (SE), selective-enamel-etch (SEE) or etch-and-rinse (ER) modes. The etch-and-rinse adhesive OptiBond^™ FL (OFL, Kerr) served as a control. The restorations were clinically evaluated (FDI criteria) after 14 days (BL), 6, 12, 24, and 36 months. Additionally, QMA was conducted on all restorations of 11 randomly selected patients. The FDI criteria and marginal gap were statistically compared between the groups at each recall as well as for the time periods between recalls. The cumulative failure rate was non-significantly higher in the OFL group when compared to all of the SBU groups. Marginal adaptation in the OFL and SBU-SE/ER groups was significantly decreased (BL-36 m, p: 0.004) in comparison to the SBU-SEE group (BL-36 m, p: 0.063). More marginal gaps were found in the OFL group than in the SBU-SEE (BL to 36 m, p: 0.063–0.003) and SBU-ER (24/36 m, p: 0.066/0.005) groups as well as in the SBU-SE group when compared to the SBU-SEE (12–36 m, p_i ≤ 0.016) and SBU-ER (24/36 m, p: 0.055/0.001) groups. SBU-SEE performed most effectively. The clinical evaluation and QMA corresponded, yet QMA detected group differences earliest after 6 months and is thus a valuable extension to clinical evaluations. Full article

This paper deals with direct restorations of teeth with non-carious cervical lesions (NCCL). NCCL defects are capable of gradual growth and are accompanied by the degradation of the surrounding tissue. Direct restorative treatment, in which the cavity is filled with a cementing agent, is considered to be an accessible and common treatment option. The study included simulations of the teeth without lesions, the teeth with V and U lesions and the tooth-restorative system. Parameterised numerical tooth models were constructed. Two cases with defect depths of 0.8 mm and ~1.7 mm and three variants with fillet radii of the defect end of 0.1, 0.2 and 0.3 mm were considered. The effect of two biomaterials for restorations was studied, namely Herculite XRV (Kerr Corp, Orange, CA, USA) and Charisma (Heraeus Kulzer GmbH, Hanau, Germany). The models were deformed with a vertical load of 100 to 1000 N from the antagonist tooth. The tooth-restorative system was considered, taking into consideration the contact interaction in the interface areas with the tooth tissues. Within the limits of the research, the character of the distribution of the deformation characteristics and their dependence on the level of loading, the depth of the defect and the radius of the curvature of the “wedge” were established. Full article

The paper considers a new technology for the treatment of non-carious cervical lesions (NCCLs). The three parameterized numerical models of teeth are constructed: without defect, with a V-shaped defect, and after treatment. A new treatment for NCCL has been proposed. Tooth tissues near the NCCLs are subject to degradation. The main idea of the technology is to increase the cavity for the restoration of NCCLs with removal of the affected tissues. The new treatment method also allows the creation of a playground for attaching the gingival margin. The impact of three biomaterials as restorations is studied: CEREC Blocs; Herculite XRV; and Charisma. The models are deformed by a vertical load from the antagonist tooth from 100 to 1000 N. The tooth-inlay system is considered, taking into account the contact interaction. Qualitative patterns of tooth deformation before and after restoration were established for three variants of the inlay material. Full article

Gingival recessions (GR) are often associated with the presence of non-carious cervical lesions (NCCL). The latter result in the disappearance of the cement–enamel junction (CEJ), with consequent difficulties both in measuring the recession itself and in performing root coverage techniques. The restoration of cervical lesions is consequently an important aspect in the treatment of GR, with the re-establishment of a “new” CEJ. This pilot study aimed to verify whether restorative therapy alone, with the execution of a restoration that mimics the convexity of the natural CEJ and thanks to a slight horizontal over-contour, can stabilize a clot in the intrasulcular site and consequently is able to change the position of the gingival margin in a coronal direction. In periodontally healthy patients, with a non-thin gingival phenotype, 10 GR-associated NCCL restorations were performed using a protocol inspired by concepts of prosthetic conditioning, with a progressively reduced convexity (“coronally dynamic restoration”) and de-epithelialization of the gingival sulcus. We observed that 70% of the treated teeth showed a reduction in crown length after 15 days (−0.267 mm), without an increase in probing depth. While considering the limitations of the sample and the need to evaluate the different parameters that can affect the result, the coronally dynamic restoration of NCCL with GR was able to influence the position of the gingival margin in a coronal direction. Full article

(1) Background: Dentine Hypersensitivity (DH) is a frequent clinical problem that causes long-term painful discomfort to patients and is a diagnostic and therapeutic challenge for dentists. The aim of this research was to verify the efficacy of a Sodium Fluoride (NaF) gel and the VivaSens^® varnish used alone or in combination with a Creation Soft Diode Laser (DL) to treat DH pain. (2) Methods: The study included 121 Non-Carious Cervical Lesions (NCCLs) in 48 patients who complained of DH pain of variable intensity, between 4 and 7 points in VAS, after application of a cold stimulus. Four study groups of 12 patients each were created and subjected to four different types of treatment. Group 1 comprised 27 NCCLs with a total VAS score of 142, who received a topical treatment of NaF. Group 2 comprised 34 NCCLs with a total VAS score of 179, who were treated with NaF in association with DL. Group 3 comprised 31 NCCLs with a total VAS score 172, who received the VivaSens varnish. Group 4 comprised 29 NCCLS with a total VAS score of 155, who were treated with VivaSens in association with DL, using a power of 0.2 Watt in continuous emission and a fiber of 400 µm diameter. (3) Results: The results for each NCCL were evaluated by the cold stimulus response and recorded according to the VAS at the end of each treatment (t1) as well as after one week (t2), 1 month (t3), and 6 months (t4). All treatments resulted in pain relief at all study times, but the best results were obtained for Group 4 at t1, with a total VAS score of 26, and for Group 2 at t2, t3, and t4, with total VAS scores of 41, 51, and 65, respectively. (4) Conclusions: The treatment with VivaSens allowed pain relief immediately after its application, but the greatest long-term benefits (t2, t3, and t4) were obtained with the topical application of NaF associated with a DL. Full article