Search Results (2,040)

h-BN spherical nanoparticles, known as white graphene, have good anti-wear properties, long service life, chemical inertness, and stability, which provide superior lubricating performance as a solid additive item to nanofluids. However, the poor dispersion stability of h-BN nanoparticles in nanofluids is a bottleneck that restricts their application. Currently, to prepare h-BN nanofluids with good dispersion stability, a cold plasma (CP) modification of h-BN nanoparticles is proposed in this study. In this research, h-BN nanofluid with added surfactant (SNL), CP-modified h-BN nanofluid with N₂ as the working gas (CP(N₂)NL), and CP-modified h-BN nanofluid with O₂ as the working gas (CP(O₂)NL) were prepared, separately. The mechanism of the dispersion stability of CP-modified h-BN nanofluid was analyzed using X-ray photoelectron spectroscopy (XPS), and the performance of CP-modified nanofluid was analyzed based on static observation of nanofluid, kinematic viscosity, and heat transfer properties. Finally, friction and wear experiments were conducted to further analyze the tribological performance of h-BN nanofluids based on the coefficient of friction, 3D surface morphology, surface roughness (Sa), scratches, and micro-morphology. The results show that CP-modified h-BN nanofluid has excellent dispersed suspension stability and can be statically placed for more than 336 h. The CP-modified h-BN nanofluid showed stable friction-reducing, anti-wear, and heat transfer performance, in which the coefficient of friction of h-BN nanofluid was about 0.66 before and after 24 h of settling. The Sa value of the sample was reduced by 31.6–49.2% in comparison with pure cottonseed oil (CO). Full article

The production of very-low-sulfur residual fuel oil is a great challenge for modern petroleum refining because of the instability issues caused by blending incompatible relatively high-sulfur residual oils and ultra-low-sulfur light distillates. Another obstacle in the production of very-low-sulfur residual fuel oil using hydroprocessing technology is the contradiction of hydrodesulfurization with hydrodemetallization, as well as the hydrodeasphaltization functions of the catalytic system used. Therefore, the production of very-low-sulfur residual fuel oil by employing hydroprocessing could be achieved by finding an appropriate residual oil to be hydroprocessed and optimal operating conditions and by controlling catalyst system condition management. In the current study, data on the characteristics of 120 samples of heavy fuel oils produced regularly over a period of 10 years from a high-complexity refinery utilizing H–oil vacuum residue hydrocrackers in its processing scheme, the crude oils refined during their production, the recipes of the heavy fuel oils, and the level of H–oil vacuum residue conversion have been analyzed by using intercriteria and regression analyses. Artificial neural network models were developed to predict the characteristics of hydrocracked vacuum residues, the main component for the production of heavy fuel oil. It was found that stable very-low-sulfur residual fuel oil can be manufactured from crude oils whose sulfur content is no higher than 0.9 wt.% by using ebullated bed hydrocracking technology. The diluents used to reduce residue viscosity were highly aromatic FCC gas oils, and the hydrodemetallization rate was higher than 93%. Full article

To address the challenges of low displacement efficiency and gas channeling in the Lukqin thick oil reservoir, characterized by high viscosity (286 mPa·s) and strong heterogeneity (permeability contrast 5–10), this study systematically investigated water flooding and foam flooding mechanisms using a large-scale 2D sandpack model (5 m × 1 m × 0.04 m). Experimental results indicate that water flooding achieves only 30% oil recovery due to a mobility ratio imbalance (M = 128) and preferential channeling. In contrast, foam flooding enhances recovery by 15–20% (final recovery: 45%) through synergistic mechanisms of dynamic high-permeability channel plugging and mobility ratio optimization. By innovatively integrating electrical resistivity tomography with HSV color mapping, this work achieves the first visualization of foam migration pathways in meter-scale heterogeneous reservoirs at a spatial resolution of ≤0.5 cm, reducing monitoring costs by approximately 30% compared to conventional CT techniques. Key controlling factors for gas channeling (injection rate, foam quality, permeability contrast) are identified, and a nonlinear predictive model for plugging strength ((S = 0.70C^0.6 k_r^−0.28) (R² = 0.91)) is established. A composite optimization strategy—combining high-concentration slugs (0.7% AOS), salt-resistant polymer-enhanced foaming, and multi-round profile control—achieves a 67% reduction in gas channeling. This study elucidates the dynamic plugging mechanisms of foam flooding in heterogeneous thick oil reservoirs through large-scale physical simulations and data fusion, offering direct technical guidance for optimizing foam flooding operations in the Lukqin Oilfield and analogous reservoirs. Full article

In oil and gas production, reservoir heterogeneity causes plugging removal fluids to preferentially enter high-permeability zones, hindering effective production enhancement in low-permeability reservoirs. Traditional chemical diverting agents exhibit insufficient stability in high-temperature, high-salinity environments, risking secondary damage. To address these challenges, this study developed a water-sensitive self-thickening emulsion, targeting improved high-temperature stability, selective plugging, and easy flowback performance. Formulation optimization was achieved via orthogonal experiments and oil–water ratio adjustment, combined with particle size regulation and viscosity characterization. Core plugging experiments demonstrated the new emulsion system’s applicability and diverting effects. Results showed that under 150 °C and 15 × 10⁴ mg/L NaCl, the emulsion maintained a stable viscosity of above 302.7 mPa·s, with particle size D₅₀ increasing from 31.1 μm to 71.2 μm, exceeding API RP 13A’s 100 mPa·s threshold for acidizing diverters, providing an efficient plugging solution for high-temperature, high-salinity reservoirs. The injection pressure difference in high-permeability cores stabilized at 2.1 MPa, significantly enhancing waterflood sweep efficiency. The self-thickening mechanism, driven by salt-induced droplet coalescence, enables selective plugging in heterogeneous formations, as validated by core flooding tests showing a 40% higher pressure differential in high-permeability zones compared to conventional systems. Full article

The development of eco-friendly surfactants is pivotal for enhanced oil recovery (EOR). In this study, a novel lignin-derived zwitterionic surfactant (DMS) was synthesized through a two-step chemical process involving esterification and free radical polymerization, utilizing renewable alkali lignin, maleic anhydride, dimethylamino propyl methacrylamide (DMAPMA), and sulfobetaine methacrylate (SBMA) as precursors. Comprehensive characterization via ¹H NMR, FTIR, and XPS validated the successful integration of amphiphilic functionalities. Hydrophilic–lipophilic balance (HLB) analysis showed a strong tendency to form stable oil-in-water (O/W) emulsions. The experimental results showed a remarkable 91.6% viscosity reduction in Xinjiang heavy crude oil emulsions at an optimum dosage of 1000 mg/L. Notably, DMS retained an 84.8% viscosity reduction efficiency under hypersaline conditions (total dissolved solids, TDS = 200,460 mg/L), demonstrating exceptional salt tolerance. Mechanistic insights derived from zeta potential measurements and molecular dynamics simulations revealed dual functionalities: interfacial modification by DMS-induced O/W phase inversion and electrostatic repulsion (zeta potential: −30.89 mV) stabilized the emulsion while disrupting π–π interactions between asphaltenes and resins, thereby mitigating macromolecular aggregation in the oil phase. As a green, bio-based viscosity suppressor, DMS exhibits significant potential for heavy oil recovery in high-salinity reservoirs, addressing the persistent challenge of salinity-induced inefficacy in conventional chemical solutions and offering a sustainable pathway for enhanced oil recovery. Full article

Anacardium occidentale, known as cashew tree, is widely used in the Amazon. This study aimed to evaluate the chemical composition, as well as the biological, physicochemical, antioxidant, and acceptability properties, of the essential oil (EO) extracted from the leaves of the dwarf cashew tree (EOLC) from the Amazonian savanna. The EO was obtained by hydrodistillation from fresh and frozen leaves, with the frozen sample selected due to its higher yield. The components of the EOLC were identified by GC-MS. Antioxidant activity was assessed using DPPH and ABTS radicals, with values of 1.96 µmol Trolox mL⁻¹ and 1.41 mM, respectively. Total phenolic content was determined by the Folin–Ciocalteu method. Antibacterial activity was evaluated by agar diffusion and minimum inhibitory concentration (MIC) methods, and toxicity was assessed with Artemia salina L. The physicochemical properties analyzed included density, refractive index, viscosity, and solubility. Terpinolene was identified as the major compound (80.21%). The EOLC exhibited antioxidant capacity, stronger antibacterial action against Gram-positive bacteria, moderate toxicity, and appropriate physicochemical characteristics. The 0.05% concentration was the most accepted in the sensory evaluation, standing out as a promising natural alternative for application in meat products. These findings highlight the potential of EOLC as a natural food preservative and a source of bioactive compounds, with promising applications in various food matrices. Full article

In the field of enhanced oil recovery (EOR), particularly for water control in high-temperature reservoirs, there is a critical need for effective in-depth water shutoff and conformance control technologies. Polymer-based in situ-cross-linked gels are extensively employed for enhanced oil recovery (EOR), yet their short gelation time under high-temperature reservoir conditions (e.g., >120 °C) limits effective in-depth water shutoff and conformance control. To address this, we developed a hydrogel system via the in situ cross-linking of polyacrylamide (PAM) with phenolic resin (PR), reinforced by silica sol (SS) nanoparticles. We employed a variety of research methods, including bottle tests, viscosity and rheology measurements, scanning electron microscopy (SEM) scanning, density functional theory (DFT) calculations, differential scanning calorimetry (DSC) measurements, quartz crystal microbalance with dissipation (QCM-D) measurement, contact angle (CA) measurement, injectivity and temporary plugging performance evaluations, etc. The composite gel exhibits an exceptional gelation period of 72 h at 130 °C, surpassing conventional systems by more than 4.5 times in terms of duration. The gelation rate remains almost unchanged with the introduction of SS, due to the highly pre-dispersed silica nanoparticles that provide exceptional colloidal stability and the system’s pH changing slightly throughout the gelation process. DFT and SEM results reveal that synergistic interactions between organic (PAM-PR networks) and inorganic (SS) components create a stacked hybrid network, enhancing both mechanical strength and thermal stability. A core flooding experiment demonstrates that the gel system achieves 92.4% plugging efficiency. The tailored nanocomposite allows for the precise management of gelation kinetics and microstructure formation, effectively addressing water control and enhancing the plugging effect in high-temperature reservoirs. These findings advance the mechanistic understanding of organic–inorganic hybrid gel systems and provide a framework for developing next-generation EOR technologies under extreme reservoir conditions. Full article

Hydraulic fracturing is a crucial technology for developing unconventional oil and gas resources, widely used to enhance low-permeability reservoirs. To clarify the complex fracture propagation behavior in the Shahejie Formation III of the Dagang Oilfield, Bohai Bay Basin, a typical low-permeability reservoir, we conducted laboratory experiments using physical models along with numerical simulations based on the cohesive element method. These approaches were used to study the impact of various formation and operational parameters on the fracture morphology of multi-cluster hydraulic fracturing, including formation properties (permeability, elastic modulus, Poisson’s ratio) and operational conditions (in situ stress, perforation cluster number, injection rate, and fracturing fluid viscosity). The results indicate that an increased horizontal stress difference coefficient can induce a transition from symmetric bi-wing fractures to asymmetric multi-branch fractures. Increasing the number of perforation clusters leads to stress interference between fractures, enhancing fracture complexity. Higher fracturing fluid injection rates promote the formation of long and wide main fractures but reduce the complexity of the fracture network, while fracturing fluid viscosity has a weaker influence on fracture morphology. Among the investigated factors, the number of perforation clusters and the injection rate exhibited a strong control on the fracture parameters. Notably, the variation trends of the fracture parameters with respect to the influencing factors in both experiments and numerical simulations were generally consistent. This study provides theoretical support for complex fracture network prediction and fracturing design optimization for low-permeability reservoirs. Full article

Studies have demonstrated that heavy oil flow exhibits threshold pressure gradient (TPG) which is closely related to the permeability and viscosity of the crude oil. Also, long-term water flooding continuously alters unconsolidated sandstone reservoir permeability through water flushing. These combined effects significantly influence water flooding performance. Therefore, in this paper, a comprehensive oil–water two phase mathematical model is developed for waterflooded heavy oil unconsolidated sandstone reservoirs based on the traditional black oil model, incorporating both time-varying permeability and threshold pressure gradient. The water-flooding-dependent threshold pressure gradient is firstly proposed, accounting for time-varying permeability. Subsequently, a simulator is developed with finite volume and Newton iteration method. Good agreement is obtained with the commercial simulator based on traditional black oil model. Afterward, the influence of permeability time variation and threshold pressure gradient is analyzed in detail. Results demonstrate that the threshold pressure gradient and time-varying permeability both decrease the oil recovery. The threshold pressure gradient (TPG) reduces the oil flow region and displacement efficiency since production. The increases in permeability after long term water flooding exacerbate reservoir heterogeneity and reduce sweep efficiency. The lowest oil recovery is observed when non-Darcy flow and permeability time variation are considered simultaneously. Furthermore, the time-varying threshold pressure gradient is observed with permeability time variation. Finally, a field data history matching was successfully performed, demonstrating the practical applicability of the proposed model. This new model better aligns with reservoir development characteristics. It can provide a theoretical guide for the development of heavy oil reservoirs. Full article

The increasing demand for the real-time monitoring of engine oil quality has driven the development of novel diagnostic methods. Traditional techniques primarily rely on physicochemical assessments, which, while effective, are often time consuming and require specialized laboratory equipment. This study explores the feasibility of using electrical property measurements to assess engine oil quality, offering a potential alternative for rapid, cost-effective diagnostics. A proprietary measurement system utilizing two innovative sensors—rectangular and concentric—was employed to evaluate the electrical characteristics of five commercially available synthetic engine oils. Key parameters, including impedance (|Z|), phase shift angle (θ), conductance (G), susceptance (B), parallel equivalent capacitance (Cp), and quality factor (Q), were measured across a frequency range of 100 Hz to 1.2 MHz. These results were correlated with conventional physicochemical parameters, specifically viscosity and infrared spectroscopy data, to determine the reliability and accuracy of electrical diagnostics in assessing oil degradation and quality variations. The findings indicate a correlation between selected electrical parameters and traditional laboratory measurements, particularly within the 1 kHz to 10 kHz frequency range, where the measurement repeatability was the highest. The study also identifies key challenges associated with sensor sensitivity to environmental factors and provides insights into optimizing the measurement process. The results contribute to the ongoing development of alternative, real-time oil condition monitoring techniques, potentially improving the reliability of automotive and industrial lubrication systems. Full article

This study aims to optimize the production of biodiesel from Blighia sapida (Ackee) seed oil, a non-edible and underutilized feedstock, as a sustainable alternative to conventional fossil-based diesel fuels. The transesterification of Blighia sapida seed oil was optimized using Response Surface Methodology (RSM) with a Box–Behnken experimental design. Three process variables, reaction time, temperature, and methanol-to-oil molar ratio, were selected for modeling biodiesel yield. The resulting biodiesel was characterized by physicochemical properties in accordance with ASTM D6751 standards. The optimal transesterification conditions were found to be 60 min, 60 °C, and a methanol-to-oil ratio of 3:1, yielding 98.36% biodiesel. This represents an improvement over the unoptimized yield of 94.3% at a 6:1 molar ratio. Experimental validation produced an average yield of 97.49%, confirming the model’s reliability. The produced biodiesel exhibited a kinematic viscosity of 4.02 mm²/s, cetane number of 54.6, flash point of 138 °C, and acid value of 0.421 mg KOH/g, which are all within the ASTM D6751 standard limits. This work is among the first to systematically optimize Blighia sapida biodiesel production using RSM. The results demonstrate its viability as a clean-burning, high-quality biodiesel fuel with promising fuel properties and environmental benefits. Its high cetane number and low methanol requirement enhance its combustion performance and production efficiency, positioning Blighia sapida as a competitive feedstock for sustainable biofuel development. Full article

Oil spills represent a significant environmental threat due to the toxicity of hydrocarbons, particularly in aquatic environments where oil rapidly spreads across the surface. Sustainable sorbents are needed for an efficient and eco-friendly response to oil spills. Cellulose aerogels produced from recycled paper and cardboard exhibit promising properties such as buoyancy, light weight, biocompatibility, and recyclability. Mechanical stability and reusability can be enhanced using cross-linkers such as starch. This study evaluated the impact of starch on cellulose aerogel morphology, sorption capacity for various petroleum products (crude oil, marine diesel, and lubricating oil), and reusability using scanning electron microscopy (SEM) and elemental mapping. Aerogels containing 0.5 and 1 wt% starch showed higher porosity, sorption capacity, and reusability. Starch did not affect hydrophobization or significantly alter nitrogen and carbon levels, indicating limited influence on surface chemistry and adsorption performance. Full article

Chitosan is recognized by its capacity to bind lipids based on the viscosity and degree of deacetylation. We analyzed the in vitro binding of Procambarus clarkii chitosan (PCC) with extra virgin olive oil and sunflower oil at temperatures and pH levels that approximate gastric-like conditions. In the tube test, 4 mg of PCC and 0.3 g of either EVO or of SO oils were mixed by stirring in test tubes with 4 mL of water acidified with HCl to a pH of 3. The PCC binding capability was determined by measuring the differences between the suspension without PCC and the suspension with PCC added. A scanning electron microscope (SEM) was utilized to further observe the uniformity and morphology of the emulsified PCC/oil hydrogels. In the test tube, PCC was shown to have a 1:11 (w/w) binding capacity for EVO and 1:15 (w/w) for SO. The SEM-based examination demonstrated a smooth surface with fine porosity of the microstructure of either PCC/oil hydrogel, proving successful emulsification. Under conditions similar to those in the stomach after a meal, including acidity, mixed composition, and temperature, PCC efficiently binds and emulsifies EVO and SO. Full article

To address the technical challenge of high polymer gel viscosity reducers losing viscosity at elevated temperatures and difficulty in controlling fluid loss, a polymer-based nano calcium carbonate composite high-temperature tackifier named GW-VIS was prepared using acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), N-vinylpyrrolidone (NVP), and nano calcium carbonate as raw materials through water suspension polymerization. This polymer gel can absorb water well at room temperature and has a small solubility. After a long period of high-temperature treatment, most of it can dissolve in water, increasing the viscosity of the suspension. The structure of the samples was characterized by infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy, and their performance was evaluated. Rheological tests indicated that the 0.5% water suspension had a consistency coefficient (k = 761) significantly higher than the requirement for clay-free drilling fluids (k > 200). In thermal resistance experiments, the material maintained stable viscosity at 180 °C (reduction rate of 0%), and only decreased by 14.8% at 200 °C. Salt tolerance tests found that the viscosity reduction after hot rolling at 200 °C was only 17.31% when the NaCl concentration reached saturation. Field trials in three wells in the Liaohe oilfield verified that the clay-free drilling fluid supported formation operations successfully. The study shows that the polymer gel has the potential to maintain rheological stability at high temperatures by forming a network structure through polymer chain adsorption and entanglement, with a maximum temperature resistance of up to 200 °C, providing an efficient drilling fluid for deep oil and gas well development. It is feasible to select nano calcium carbonate to participate in the research of high-temperature resistant polymer materials. Meanwhile, the combined effect of monomers with large steric hindrance and inorganic materials can enhance the product’s temperature resistance and resistance to NaCl pollution. Full article

Background: Tuberculosis remains a significant global health issue, and the rise of drug-resistant strains is becoming increasingly concerning. Currently, treatment options are limited to systemic regimens; however, developing topical drug delivery systems could offer advantages for treating cutaneous tuberculosis (CTB) when applied directly to the lesions. We developed topical emulsions using the self-emulsification mechanism that combine fixed doses of isoniazid (INH) and rifampicin (RIF) using a quality-by-design approach. Methods: Preformulation studies pertaining to drug solubility in various solvents, the construction of pseudoternary diagrams to identify self-emulsification regions for each tested excipient combination, and the preparation of checkpoint formulations were conducted and visually examined. Formulations displaying no physical instabilities were subsequently exposed to characterization experiments, including droplet size determination, zeta potential, size distribution, viscosity, pH, self-emulsification, cloud point, robustness to dilution, and thermodynamic stability assessment. Three selected formulations were consequently subjected to membrane release experiments, followed by skin diffusion studies, and INH and RIF stability in these emulsions was determined, because these drugs have a known interaction. Conclusions: While incorporating essential oils in a topical formulation improved RIF solubility, it also resulted in several instabilities. RIF exhibited greater susceptibility to degradation under higher temperatures and lower pH conditions. However, drug release from all formulations tested was confirmed. Notably, olive oil microemulsions demonstrated the most favorable characteristics for dermal drug delivery; nonetheless, drug diffusion into and through the skin (which was not desired) could not be quantified. Despite these challenges, the findings indicate that topical drug delivery systems using the self-emulsification process can facilitate the direct treatment of CTB. Full article