Search Results (69)

This study explores the development of luminescent wearables using machine embroidery with phosphorescent threads to enhance the visibility and safety of children in low-light environments, addressing the need for improved child protection in urban settings. Five embroidery designs incorporating sports, animal, celestial, and typographic motifs were created using Digitizer MBV 2.0 software and produced on a Janome MB4 embroidery machine with phosphorescent threads on black woven fabric for optimal contrast. The luminous performance was evaluated through photographic documentation and lux meter measurements in a controlled light-tight chamber, assessing light emission intensity and decay over time after UV activation. Results demonstrate that designs with higher stitch counts and densities exhibit stronger initial illuminance and longer persistence, with exponential decay curves highlighting rapid initial intensity loss. Variations in design size and stitch density showed linear correlations with illuminance. The study demonstrates the feasibility of luminescent embroidery as a scalable and child-friendly approach to enhancing low-light visibility and safety, combining functionality with aesthetic appeal. Full article

Persistent luminescence nanoparticles (PLNPs) represent a unique class of optical materials. They possess the ability to absorb and store energy from external excitation sources and emit light persistently once excitation terminates. Because of this distinctive property, PLNPs have attracted considerable attention in various areas. Especially in recent years, PLNPs have revealed marked benefits and extensive application potential in fields such as biological detection, imaging, targeted delivery, as well as integrated diagnosis and treatment. Not only do they potently attenuate autofluorescence interference arising from biological tissues, but they also demonstrate superior signal-to-noise ratio and sensitivity in in vivo imaging scenarios. Therefore, regarding the current research, this paper firstly introduces the classification, synthesis methods, and luminescence mechanism of the materials. Subsequently, the research progress of PLNPs in biological detection and imaging and medical treatment in recent years is reviewed. The challenges faced by materials in biomedical applications and the outlook of future development trends are further discussed, which delivers an innovative thought pattern for developing and designing new PLNPs to cater to more practical requirements. Full article

In this paper, we study the temperature- and emission wavelength-dependent time responses of previously reported precursor-driven Eu²⁺- and Dy³⁺-doped strontium-aluminate phosphors to create unique luminescent anti-counterfeiting tags suitable for detection with smartphones. A smartphone was used to detect the red–green–blue (RGB) components of the rise and decay time responses of the samples in a temperature range from 0 °C to 100 °C. The RGB color-dependent detection revealed a finer excitation/relaxation kinetics structure of the individual samples, which becomes evident in the decay responses. The results suggest another possibility for multilevel encoding and temperature sensor applications, and provides a foundation for developing a more accurate theoretical model of the energy transitions in phosphorescent materials. Full article

In this work, a precursor-driven tailoring of strontium aluminate phosphors doped with Eu²⁺ and Dy³⁺ to generate unique, batch-specific luminescent signatures suitable for smartphone-detectable anti-counterfeiting tags was developed. A microwave-assisted hydrothermal synthesis approach was employed to explore the impact of a wide range of alkaline hydroxide and carbonate precursors on the structure of strontium aluminate. The resulting materials exhibited distinct differences in crystalline phase composition, morphology, and trap depth distribution. A smartphone-based detection system was developed, enabling rapid identification of spectral fingerprints. This study demonstrates a viable strategy for embedding unique luminescent identifiers, offering a scalable solution for robust, low-cost anti-counterfeiting applications in both the spectral and the time domain. Full article

Near-infrared persistent luminescence (PersL) nanoparticles (NPs) have great potential in biomedical applications due to their ability to continuously emit tissue-penetrating light. Despite numerous reports on the distribution, biological safety and other consequences of PersL NPs in vitro and in vivo, there has been a lack of studies on the optical properties of these NPs in the physiological environment. In light of this, we investigated the effects of short-term immersion of the prominent Cr³⁺-doped ZnGa₂O₄ (CZGO) NPs in a simulated physiological environment for up to 48 h. This paper reports the changes in the structural and optical properties of CZGO NPs after their immersion in a phosphate-buffered saline (PBS) solution for pre-determined time intervals. Interestingly, the luminescence intensity and lifetime noticeably improved upon exposure to the PBS media, which is unusual among existing nanomaterials explored as bioimaging probes. After 48 h of immersion in the PBS solution, the CZGO NPs were approximately twice as bright as the non-immersed sample. X-ray spectroscopic techniques revealed the formation of ZnO, which results in an improvement in observed luminescence. Full article

Circularly polarized luminescence (CPL) is an emerging field with significant applications in molecular electronics, optical materials, and chiroptical sensing. Achieving efficient CPL emission in organic systems remains a major challenge, particularly in the development of materials with high fluorescence quantum yields (Φ_F) and large luminescence dissymmetry factors (g_lum). Herein, we report the efficient synthesis of shape-persistent tetraphenylethylene macrocycles and investigate its potential as a CPL material. Chiral side chains were introduced to induce chiroptical properties. The macrocycles and their properties were characterized using NMR, MALDI-TOF MS, FT-IR, TGA, DSC, UV-Vis spectroscopy, SEM, fluorescence spectroscopy, ECD, and CPL. A significant fluorescence enhancement was observed upon aggregation, demonstrating a typical aggregation-induced emission (AIE) behavior. Moreover, one of the macrocycles in the solid state displayed distinct CPL emission with a high g_lum of 2 × 10⁻² and a Φ_F value reaching 60%, and exhibited aggregation-induced circularly polarized luminescence (AICPL). These findings highlight the advantage of using a macrocycle with a noncollapsible backbone for the design of organic systems with CPL property, offering promising applications in chiroptical materials. Full article

This study reviews the advanced anti-counterfeiting applications of CsCdCl₃, a lead-free all-inorganic perovskite crystal exhibiting dynamic luminescent properties responsive to temperature and UV light. Using synthesis methods such as Bridgman and hydrothermal techniques and incorporating dopants like bromine and tellurium, this research achieves improved luminescent stability, spectral diversity, and afterglow characteristics in CsCdCl₃. The crystal demonstrates extended afterglow, photochromic shifts, and temperature-sensitive luminescence, enabling applications in 4D encoding for secure data encryption and in cold-chain temperature monitoring for pharmaceuticals. Despite these promising attributes, the challenges related to photostability, batch consistency, and environmental resilience persist, necessitating further exploration into the optimized synthesis and doping strategies to enhance material stability. These findings underscore the potential of CsCdCl₃ for high-security information storage, pharmaceutical anti-counterfeiting, and real-time environmental sensing, positioning it as a valuable material for the next generation of secure, intelligent packaging solutions. Full article

The phosphors with persistent luminescence in the NIR (near-infrared) region and the NIR-to-NIR Stokes luminescence properties have received considerable attention owing to their inclusive application prospects in the in vivo imaging field. In this paper, Nd³⁺ doped SrSnO₃ phosphors with remarkable NIR emission performance were prepared using a high temperature solid state reaction method; the phase structure, morphology, and luminescence properties were discussed systematically. The SrSnO₃ host exhibits broadband NIR emission (800–1300 nm) with absorptions in the near ultraviolet region. Nd³⁺ ions emerge excellent NIR-to-NIR Stokes luminescence under 808 nm laser excitation, with maximum emission at around ~1068 nm. The concentration-dependent luminescence properties, temperature dependent emission, and the luminescence decay curves of Nd³⁺ in the SrSnO₃ host were also studied. The Nd³⁺ doped SrSnO₃ phosphors exhibit exceptional thermal stability; the integrated emission intensity can retain approximately 66% at 423 K compared to room temperature. Most importantly, NIR persistent luminescence also can be observed for the SrSnO₃:Nd³⁺ samples, which is in the first and second biological windows. A possible mechanism was proposed for the persistent NIR luminescence of Nd³⁺ based on the thermo-luminescence spectra. Consequently, the exciting results indicate that multifunctional NIR luminescence has been successfully realized in the SrSnO₃:Nd³⁺ phosphors. Full article

Carbon dots (C-Dots) have garnered significant attention in various fields, including biomedical applications, photocatalysis, sensing, and optoelectronics, due to their high luminescence, biocompatibility, and ease of functionalization. However, concerns regarding their potential toxicity persist. Conventional synthesis methods for C-Dots often require long reaction times, high pressures, expensive equipment, extreme temperatures, and toxic reagents. In contrast, microwave irradiation provides a rapid, cost-effective, and scalable alternative for the synthesis of high-quality C-Dots. In this study, we report the single-step, 3-min synthesis of water-stable carbon dots at 100 °C, 120 °C, and 140 °C using microwave irradiation. Particle stability was achieved through polyethyleneimine (PEI) functionalization. The toxicity of the synthesized carbon dots was evaluated in marine crustaceans, revealing that C-Dots with an estimated size below 10 nm did not exhibit toxicity after 24 and 48 h of exposure. These findings demonstrate the potential of microwave-synthesized carbon dots as non-toxic, water-stable nanomaterials for environmental and biomedical applications. Full article

Near-infrared (NIR) persistent luminescence (PersL) materials have attracted extensive attention due to their great promise in medical diagnostics, bio-imaging, night vision surveillance, multi-level anticounterfeiting, and information encryption. To achieve NIR PersL (micro/nano-) materials with the desired properties, a variety of synthesis methods have been employed, including solid-phase reaction and liquid-phase synthesis. Different synthesis methods have different but important effects on the micro/nano-structure, luminescence, and PersL properties of the materials. Moreover, the influence of various synthesis methods on the properties of NIR PersL materials determines the selection of preparation approaches for other new material systems. Taking the representative NIR PersL ZnGa₂O₄:Cr³⁺ material as an example, four synthesis procedures are applied, namely, high-temperature solid-state reaction (SSR), high-temperature molten salt method (MSM), hydrothermal method (HM), and microwave-assisted solid-state (MASS) method. The structural and luminescent properties of samples made by SSR, MSM, HM, and MASS are compared. Notably, it is revealed that the MASS method can create additional trapping energy levels, which is of great significance for emerging applications. This work demonstrates the different effects of synthesis methods on PersL performance and provides a good guideline for the rapid and reasonable selection of preparation methods for diverse applications. Full article

Antifungal substances are essential for managing fungal infections in humans, animals, and plants, and their usage has significantly increased due to the global rise in fungal infections. However, the extensive application of antifungal agents in pharmaceuticals, personal care products, and agriculture has led to their widespread environmental dissemination through various pathways, such as excretion, improper disposal, and agricultural runoff. Despite advances in wastewater treatment, many antifungal compounds persist in the environment, affecting non-target organisms and contributing to resistance development. This study investigates the environmental impact of two novel antifungal agents, VT-1161 and T-2307, recently introduced as alternatives for treating resistant Candida spp. We assessed their ecotoxicity and mutagenicity using multiple bioassays: immobilization of Daphnia magna, growth inhibition of Raphidocelis subcapitata, luminescence inhibition of Aliivibrio fischeri, and mutagenicity on Salmonella typhimurium strain TA100. Results indicate that both VT-1161 and T-2307 exhibit lower toxicity compared to existing antifungal compounds, with effective concentrations (EC₅₀) causing 50% response ranging from 14.34 to 27.92 mg L⁻¹. Furthermore, both agents were classified as less hazardous based on the Globally Harmonized System of Classification and Labeling of Chemicals. Despite these favorable results, further research is needed to understand their environmental behavior, interactions, and potential resistance development among non-target species. Our findings highlight the importance of comprehensive environmental risk assessments to ensure the sustainable use of new antifungal agents. Full article

Due to their low cost, good biocompatibility, and ease of structural modification, organic long-persistent luminescence (LPL) materials have garnered significant attention in organic light-emitting diodes, biological imaging, information encryption, and chemical sensing. Efficient charge separation and carrier migration by the host–guest structure or using polymers and crystal to build rigid environments are effective ways of preparing high-performance materials with long-lasting afterglow. In this study, four types of crystalline materials (MODPA: DDF-O, MODPA: DDF-CHO, MODPA: DDF-Br, and MODPA: DDF-TRC) were prepared by a convenient host–guest doping method at room temperature under ambient conditions, i.e., in the presence of oxygen. The first three types exhibited long-lived charge-separated (CS) states and achieved visible LPL emissions with durations over 7, 4, and 2 s, respectively. More surprisingly, for the DDF-O material prepared with PMMA as the polymer substrate, the afterglow time of DDF-O: PMMA was longer than 10 s. The persistent room-temperature phosphorescence effect caused by different CS state generation efficiencies and rigid environment were the main reason for the difference in LPL duration. The fourth crystalline material was without charge separation and exhibited no LPL because it was not a D-A system. The research results indicate that the CS state generation efficiency and a rigid environment are the key factors affecting the LPL properties. This work provides new understandings in designing organic LPL materials. Full article

Persistent luminescent materials are those which can store an amount of energy locally and release it slowly in the form of light. In this work, persistent luminescent nanoparticles (PLNPs) were synthesized and incorporated into polypropylene (PP) filaments at various loading percentages. We investigated the optical properties of both the as-prepared PLNPs and the PLNP-loaded filaments, focusing on any changes resulting from the integration into the filaments. Specifically, visible and near-infrared spectroscopy were used to analyze the emission, excitation, and persistent luminescence of the PLNPs and PLNP-loaded filaments. The tensile properties of the extruded filaments were also investigated through breaking tenacity, elongation at break, Young’s modulus, and secant modulus. All PLNP-loaded filaments were shown to exhibit persistent luminescence when exposed to ultraviolet light. While there were no significant changes in the elongation at break or Young’s modulus for the loading percentages tested, there was a slight increase in breaking tenacity and a decrease in the secant modulus. Finally, the filaments were shown to maintain their optical properties and persistent luminescence even after abrasion testing used to simulate the normal wear and tear that fabric experiences during use. These results show that PLNPs can be successfully incorporated into filaments which can be used in fabrics and will maintain the persistent luminescent properties. Full article

Aluminum garnets display exceptional adaptability in incorporating mismatching elements, thereby facilitating the synthesis of novel materials with tailored properties. This study explored Ce³⁺-doped Tb₃Al_5−xSc_xO₁₂ crystals (where x ranges from 0.5 to 3.0), revealing a novel approach to control luminescence and photoconversion through atomic size mismatch engineering. Raman spectroscopy confirmed the coexistence of garnet and perovskite phases, with Sc substitution significantly influencing the garnet lattice and induced A_1g mode softening up to Sc concentration x = 2.0. The Sc atoms controlled sub-eutectic inclusion formation, creating efficient light scattering centers and unveiling a compositional threshold for octahedral site saturation. This modulation enabled the control of energy transfer dynamics between Ce³⁺ and Tb³⁺ ions, enhancing luminescence and mitigating quenching. The Sc admixing process regulated luminous efficacy (LE), color rendering index (CRI), and correlated color temperature (CCT), with adjustments in CRI from 68 to 84 and CCT from 3545 K to 12,958 K. The Ce³⁺-doped Tb₃Al_5−xSc_xO₁₂ crystal (where x = 2.0) achieved the highest LE of 114.6 lm/W and emitted light at a CCT of 4942 K, similar to daylight white. This approach enables the design and development of functional materials with tailored optical properties applicable to lighting technology, persistent phosphors, scintillators, and storage phosphors. Full article

Spinels are important materials for an application in bioimaging. The key advantage with spinel-type hosts is the presence of antisite defects, which act as charge reservoirs for trapping electrons and holes at complementary defect sites. This makes them a host system similar to a molecular system. Herein, we present a systematic approach to modulating the band gap of an inverse ${\mathrm{Zn}}_2$${\mathrm{TiO}}_4$ spinel. With a change in ZnO concentration, the absorption band at 375 nm diminishes and disappears at a ZnO:TiO₂ concentration of 1.40:1.00. The band gap of the material is modified from 3.30 to 4.40 eV. The crystal structure of the sample does not change drastically as determined using X-ray diffraction and Rietveld refinement. The ${\mathrm{Zn}}_2$${\mathrm{TiO}}_4$ emits in the UV-A region with a lifetime in the time domain of ‘ns’. The sample also shows persistent luminescence of at least 15 min upon excitation with 254 nm with prominent emission in the UV-A region (300–390 nm). The present results open a new avenue for the synthesis of spinel hosts where the band gap can be modified with ease. The UV emission thus observed is expected to find usage in interesting applications like photocatalysis, anti-counterfeiting, water disinfecting, etc. Full article