Search Results (111)

Background/Objectives: Current clinical evidence suggests that cannabidiol (CBD) demonstrates therapeutic potential in the management of chronic pain, particularly in conditions involving inflammation. However, its therapeutic potential is severely limited by poor oral bioavailability, extensive first-pass metabolism, and the need for frequent high-dose administration, which compromises patient adherence and tolerability. Long-acting injectable (LAI) delivery systems offer a strategy to overcome these limitations by providing sustained plasma concentrations and reducing dosing frequency. This study aimed to develop and optimise CBD-loaded poly (lactic-co-glycolic acid) (PLGA) microspheres for LAI delivery and to evaluate poly(2-ethyl-2-oxazoline) (POx) as a functional and biocompatible alternative to the conventionally used poly (ethylene glycol) (PEG). Methods: CBD-loaded microspheres were prepared using emulsion–solvent evaporation technique. The formulations were optimised based on entrapment efficiency (EE), drug loading (DL), particle size distribution, surface morphology, thermal behaviour, in vitro release kinetics, and cytocompatibility using NIH 3T3 fibroblasts. Multiple in vitro release methodologies, including dialysis bag, shaking-flask, and USP Apparatus IV, were evaluated to identify the most discriminative and practical approach for long-term release assessment. Results: The optimised POx-based microspheres demonstrated superior control over particle size, yielding significantly smaller and more uniform particles compared with PEG-based microspheres (124 ± 1.47 µm vs. 218 ± 13.5 µm, respectively). Differential scanning calorimetry (DSC) confirmed molecular dispersion of CBD within the polymer matrix. In vitro release studies demonstrated sustained drug release over 20 days. Conclusions: POx represents a promising alternative to PEG for the formulation of CBD-loaded PLGA microspheres, offering enhanced physicochemical stability and biological compatibility. This platform supports the development of safe and effective long-acting injectable CBD therapies and consideration of POx as an alternative to PEG. Full article

In this work, we designed non-viral gene delivery vector systems based on three poly(2-ethyl-2-oxazoline)-ran-poly[2-(3-butenyl)-2-oxazoline] copolymers functionalized by primary, secondary, and tertiary amino groups. The impact of copolymer structure and composition was sought through the examination of basic physicochemical and biological parameters. The complexation ability of copolymers with plasmid DNA was studied by ethidium bromide quenching assay. The polyplex particles size and ζ-potential were determined by dynamic and electrophoretic light scattering. The release ability of copolymers was assessed by competitive displacement of DNA using dextran sulfate. The biological performance of amino-functionalized poly(2-ethyl-2-oxazoline)-ran-poly[2-(3-butenyl)-2-oxazoline] based gene delivery systems was evaluated, and their behavior under various environmental conditions, such as pH and ionic strength, was investigated. Cytotoxicity was assessed in two human lung-derived cell lines, and the ability of the copolymers to mediate plasmid DNA delivery and expression was examined. The resulting polyplex nanoparticles exhibited the ability to release DNA molecules and sensitivity to alterations in pH and ionic strength. All systems showed high biocompatibility and were able to mediate plasmid DNA delivery, resulting in detectable EGFP expression in vitro. The vector properties were found to be driven by a multifactorial interplay among hydrophobic character, thermoresponsive behavior, polymer mobility, charge accessibility, intracellular environmental responsiveness, secondary structure effects, etc. The copolymer bearing primary amino groups displayed a distinct balance between DNA binding and release, characterized by moderate complex stability and enhanced sensitivity to environmental changes. These findings provide mechanistic insight into how amino functionality and polymer structure influence the structure–property–behavior relationships of polyoxazoline-based non-viral gene delivery systems. Full article

Polymer films and polymer blend films are widely used as functional materials; however, their photophysical behavior cannot be fully explained solely by bulk properties such as relative permittivity or glass transition temperature. In this study, we investigate how local polymer microenvironments regulate fluorescence responses by employing two strongly emissive solvatochromic dyes—FπPCM, a D–π–A-type π-conjugation-extended fluorene dye, and PK, a D–π–A-type pyrene dye—as molecular probes. The photophysical properties of these dyes were systematically examined in a series of transparent polymer matrices, including polystyrene, polycarbonate, poly(methyl methacrylate), poly(vinyl chloride), triacetylcellulose, poly(butyl methacrylate), and poly(2-ethyl-2-oxazoline). Polymer films containing the dyes were prepared by solution casting from homogeneous polymer–dye solutions onto quartz substrates followed by solvent evaporation. Both dyes exhibited polymer-dependent variations in fluorescence wavelength, quantum yield, and lifetime, reflecting not only differences in polymer polarity but also local chain packing and specific dye–polymer interactions. Fluorescence lifetime analysis of PS/POz blend films revealed microscopic heterogeneity even in miscible systems, quantitatively captured using averaged lifetime parameters. Temperature-dependent fluorescence measurements further demonstrated that thermal history and structural relaxation significantly influence local polymer environments. In particular, ratiometric fluorescence analysis of PMMA/PBMA blend films enabled reproducible temperature sensing over a wide range from 30 to 120 °C, despite an overall negative temperature response. These results establish solvatochromic dyes as versatile optical probes for evaluating local polymer microenvironments and highlight their potential for polymer-state monitoring and fluorescence-based temperature-sensing applications. Full article

The synthesis of enantiomerically pure chiral β-nitroalcohols is a crucial objective in asymmetric catalysis. In order to efficiently obtain such chiral products, we developed a series of thermoresponsive, oxazoline–copper catalysts (Cu^II-PN_xFe_yO_z) via sequential reversible addition–fragmentation chain transfer (RAFT) polymerization. These catalysts can self-assemble in water into single-chain nanoparticles (SCNPs) with biomimetic behavior, in which intramolecular hydrophobic and metal-coordination interactions generate a confined hydrophobic cavity. Comprehensive characterization by FT-IR, TEM, DLS, CD, CA, and ICP analysis confirmed the nanostructure and composition. When applied to the aqueous-phase asymmetric Henry reaction between nitromethane and 4-nitrobenzaldehyde, the optimal catalyst (2.0 mol%) achieved a quantitative yield (96%) with excellent enantioselectivity (up to 99%) within 12 h. Furthermore, the thermosensitive poly(N-isopropylacrylamide, NIPAAm) block enabled facile catalyst recovery through temperature-induced precipitation above its lower critical solution temperature (LCST). This work presents an efficient and recyclable biomimetic catalytic system, offering a novel strategy for designing sustainable chiral catalysts for green organic synthesis. Full article

2-Oxazolines are five-membered heterocyclic compounds with significant biological properties. They also play an important role in organic synthesis, acting as chiral ligands and protecting groups for hydroxyamino acids and amino alcohols. Poly(2-oxazolines) are known coating materials, for example, in biomedicine. Classic synthetic methods of 2-oxazolines involve a dehydrative cyclisation reaction between amino alcohols and carboxylic acids, acid chlorides, nitriles, imidates, and aldehydes. However, the electrophilic intramolecular cyclization of unsaturated amides is becoming an increasingly important synthetic method for the preparation of 2-oxazolines. This brief review summarizes procedures for synthesizing oxazolines using the electrophilic intramolecular oxidative cyclisation of N-allyl and N-propargyl amides, as published between 2014 and 2024. It covers the synthesis of 5-halomethyl-, 5-trifluoromethyl-, 5-sulfonylmethyl-, 5-sulfenylmethyl-, 5-selenylmethyl-, 5-acetoxymethyl-, 5-hydroxymethyl-, 5-aminomethyl-, 5-alkilo-, and 5-alkylideneoxazolines. Full article

Surgical dead spaces are challenging to handle with current preventive methods. Tissue adhesives show promise in obliterating ‘dead spaces’, but the drawbacks of currently available adhesives prevent them from being used for dead space elimination. An adhesive powder based on N-Hydroxysuccinimide-poly(2-oxazoline), NHS-POx, combines robust adhesive strength in moist environments with favorable biocompatibility and biodegradability, which makes this an interesting candidate for eliminating spaces that remain between tissues after surgery. The current study evaluates the swelling, crosslinking speed, and degradation properties of this novel tissue adhesive. These results were then used to design multiple adhesive variants differing in pH, surfactant addition, and particle size, which were subsequently examined based on their wetting rates, adhesive strength, and durability. The powder displayed minimal swelling and rapid crosslinking properties, by which the latter could be increased by a basic buffer or surfactant addition and reduced by increasing particle size. The wetting rate of the powder increased when a surfactant (Pluronic F68) was added to the mix. The adhesive strength, as measured by tensile and shear strength measurements of different prototypes of the adhesive powder, was significantly better than that of a commercially available fibrin glue. The addition of both buffer and Pluronic F68 led to a breakdown of adhesive force after 14 days of incubation, while the prototype containing neither buffer nor Pluronic F68 still had measurable adhesive force after 14 days of incubation. The current study results display several characteristics of the NHS-POx-based tissue adhesive that are favorable for tissue approximation, preventing the occurrence of dead spaces. The most effective and usable adhesive prototype will be identified in further ex vivo and in vivo animal model studies. Full article

Background/Objectives: This study aimed to develop a novel amorphous solid dispersion (ASD) platform using poly(2-ethyl-2-oxazoline) (PEtOx) for the solubility enhancement of poorly water-soluble drugs. Fenofibrate (FB), a Biopharmaceutics Classification System (BCS) Class II drug, was selected as the model drug. The novelty of this work lies in the formulation of dual-matrix systems by blending PEtOx of varying molecular weights (50 kDa, 200 kDa, 500 kDa) with solubility-enhancing polymers, Soluplus^® and Kollidon^® VA64, to investigate component compatibility, synergistic solubility enhancement, and the influence of PEtOx molecular weight on drug release. Methods: ASDs were prepared via hot-melt extrusion (HME) and characterized using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and Fourier transform–infrared spectroscopy (FTIR) to confirm FB amorphization and evaluate drug–polymer interactions. In vitro dissolution testing was performed to assess drug release performance, and stability studies were conducted at ambient conditions for one month to evaluate physical stability. Results: DSC, PXRD, and FTIR confirmed the successful amorphization of FB and good miscibility between PEtOx and the selected excipients. In vitro dissolution studies showed an 8–12-fold increase in FB release from ASDs compared to crystalline drug. Lower-molecular-weight PEtOx grades yielded faster release profiles, while binary blends with Soluplus^® or Kollidon^® VA64 enabled tailored drug release. Stability testing indicated that all formulations maintained their amorphous state over one month. Conclusions: PEtOx-based ASDs represent a versatile platform for enhancing the solubility and dissolution of poorly water-soluble drugs. By adjusting polymer molecular weight and combining with complementary excipients, release profiles can be optimized to achieve improved performance and stability. Full article

Background/Objectives: The study describes the elaboration and evaluation of thermosensitive niosomes intended for the systemic application of daunorubicin hydrochloride. The attained stimulus sensitivity would determine the release of the chemotherapeutic predominantly at the target site, which ensures a higher drug concentration and leads to reduced systemic toxicity. The latter is highly beneficial, as the anthracycline antibiotic is known for its dose-dependent cardiotoxic effects. Methods: Conventional and copolymer-modified niosomes were prepared via thin-film hydration and the transmembrane ammonium gradient method, allowing us to assess the impacts of copolymer type-DHP-PiPOX (1,3-dihexadecyl-propane-2-ol-poly(2-isopropyl-2-oxazoline)) or DHP-PETEGA (1,3-dihexadecyl-propane-2-ol-poly(ethoxytriethylene glycol acrylate)) and their concentrations (0.5, 1, and 2.5 mol%), as well as the method of preparation, on the main physicochemical properties of the vesicles. Niosomes were characterized in terms of their size, polydispersity index (PDI), zeta potential, entrapment efficiency, morphology, and drug release properties. Thermosensitivity was evaluated by fluorescence studies, and the antiproliferative activity of optimized formulations was assessed against the acute myelocyte leukemia-derived HL-60 cell line. Results: Daunorubicin-loaded niosomes modified with DHP-PiPOX and DHP-PETEGA at 2.5 mol% exhibited suitable physicochemical properties for systemic application, with sizes below 200 nm (155 and 158 nm respectively), low PDI values of 0.25 and 0.29, spherical morphology, and high daunorubicin entrapment efficiency (68.6 and 66.5% respectively). The vesicles showed temperature-dependent drug release properties and superior antiproliferative activity compared to the free daunorubicin (IC₅₀ values of 6.91 and 8.54 vs. 12.14). Conclusions: The obtained results indicate that the developed thermosensitive nanovesicles may serve as a suitable drug delivery system for the systemic application of daunorubicin hydrochloride. Full article

Poly(2-oxazoline) coatings with antibiofouling properties and good biocompatibility can also be deposited by the plasma polymerization method using 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline as monomers. Plasma polymers are formed of various monomer fragments and recombination products. Commonly, plasma polymers are highly crosslinked structures created by many different fragments, preferably of no repeating unit. Thus, chemical analysis of plasma polymers is difficult. To obtain a better description of plasma polymerized poly(2-oxazoline) coatings, the analysis of their plasma deposition process was performed. The electron ionization of 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline molecules was studied using the crossed electron–molecular beam technique with mass spectrometric detection of the produced ions. The chemical composition of gaseous compounds at plasma polymerization was determined by gas chromatography-mass spectrometry (GC-MS), ion mobility spectrometry (IMS) and optical emission spectroscopy (OES). Also, the chemical composition and antibacterial activity of the water leachates from previously deposited poly(2-oxazoline) films were tested using FTIR spectroscopy and the disk diffusion method, respectively. It was found that acetonitrile and propionitrile are the main neutral products created in the nitrogen discharge with 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline monomers. The water leachates from deposited films do not exhibit any antibacterial activity. It was concluded that the antibacterial properties of POx films are due to their hydrophility. Full article

Alzheimer’s disease is the most widespread neurodegenerative disease in the world. Galantamine hydrobromide (GH) is one of the drugs used to treat mild to moderate dementia of the Alzheimer type. Due to the fact that the specificity of the disease requires maximally facilitated intake, orodispersible films present such an opportunity. In the present study orodispersible films based on poly(2-ethyl-2-oxazoline) as well as partially hydrolyzed poly(2-ethyl-2-oxazoline) were prepared and studied as delivery systems for GH. Two samples of partially hydrolyzed PEtOx were synthesized—one of relatively low degree of hydrolysis and another one of relatively high degree of hydrolysis, and studied by Nuclear Magnetic Resonance (NMR). Cytotoxicity assay was performed that validated the low hydrolyzed derivative as biocompatible polymer that maintained desirable physicochemical characteristics without compromising the safety, thereby it was selected for further research. The films were prepared by the solution casting method and characterized by different methods. FTIR was used to determine the potential interactions between the galantamine molecule and the film components. Based on the Thermogravimetric Analysis (TGA) conducted, it was concluded that all films were sufficiently thermally stable, as the component decomposition stage (after initial solvent removal) began above 180 °C. The polymer films were further characterized with the determination of Shore hardness and the results showed that the films containing glycerol as a plasticizer exhibited higher hardness compared to those with PEG as a plasticizer. The disintegration time of the films was determined visually using Petri dishes and it was found that the films disintegrated within the range of 0.52 to 1.58 min, fully meeting the pharmacopoeial requirements. GH release profiles in PBS at 37 °C were obtained, and it was found that by the second minute, 80–90% of the drug were released from the different films, and the release followed an anomalous diffusion mechanism (Case II). Full article

Bacterial adhesion and the subsequent formation of biofilms and biofouling have significant economic and health impacts across all sectors. They are especially impactful in industrial corrosion, healthcare, food processing, agriculture, and waste and drinking water. Synthetic polymers that resist bacterial adhesion are adaptable to a wide range of applications in all of these fields. While there are many bacteria-resistant polymers, some of the best performing include polyethylene glycol (PEG), poly(oxazoline) (POZ), and zwitterionic polymers, with zwitterionic polymers showing the most promise with reductions in bacteria adhesion up to 99% over controls. This review summarizes the demonstrated bacterial resistance performance of these polymer coatings based on literature published over the last ten years. It also identifies the front runners for preventing bacterial adhesion while providing the critical next steps for widespread adoption of this technology. Full article

This work is part of a current and essential issue aiming to find a solution for the replacement of chromium(VI) and cadmium in the surface treatment process applied to electrical connectors. The application of a protective coating obtained by the sol–gel route proves to be an interesting alternative method and numerous studies describe efficient anticorrosion coatings to protect various metallic alloys. The issue of electrical connectors made of 6061 alloy is to combine anticorrosion protection and electrical conduction, which are antagonistic properties, so multifunctional sol–gel coatings and/or architectures have to be synthesized and shaped on connectors. In this work, several experimental parameters, such as the type of carbon filler, the hydrolysis ratio, the precursors’ introduction order are studied and evaluated to achieve industrial requirements. Thus, aqueous suspensions of carbon fillers have been introduced into sol–gel formulations to give rise to conductive coatings (200–500 mΩ_□) with high anticorrosion properties (500 h NSS resistance), in which thickness is less than 10 microns. The incorporation of organic additives poly(2-ethyl-2-oxazoline) or hydroxypropylmethylcellulose positively impacts the flash point of the sol (>60 °C) making the sol–gel process compatible with the HSE recommendation and the ATEX standard. Full article

The significant waste generated by the fashion industry necessitates sustainable textile recycling strategies. Polyester, made from poly(ethylene terephthalate) (PET), is abundant in post-consumer textiles. Technologies have been developed to convert low-density garment waste into flakes, but the role of color sorting in achieving uniform aesthetics in injection-moldable plastics remains underexplored. This study compares materials extruded from dark color-sorted polyester garment flakes with those from light-color flakes in terms of processability in extrusion and injection molding. The properties examined include melt fluidity, injection molding shrinkage, and mechanical and thermal properties. Commercial chain extenders with anhydride, oxazoline, or epoxide reactive groups were added during extrusion. Interestingly, only dark-colored extruded pellets showed significant degradation, but all the chain extenders allowed melt fluidity to be controlled during reprocessing. The bisoxazoline-based additive was the most promising, due to the highly improved ductility of the samples, regardless of whether they were dark-colored or light-colored. The results indicate significant potential for the industrial recycling of post-consumer textiles and highlight the industrial feasibility of repurposing post-consumer polyester garments. This approach not only supports initiatives of circular economy but also offers a viable solution for managing textile waste, particularly in the fashion industry. Additionally, the suggested recycling route combats the production of microplastics. Full article

Poly(2-oxazoline) (POx), a typical thermoresponsive polymer with good biocompatibility, was conjugated with environment-sensitive tetraphenylenethene (TPE) and hydroxyphenylbenzoxazole (HBO) to achieve unique thermometer readings. Through phase transition induced by temperature, the thermometers can measure temperature in biologic range with ratiometric fluorescence response, ultrahigh sensitivity and good reversibility. Moreover, the thermometer can be used to measure the change in temperature with large fluorescence difference in living cells. Full article

Conjugated polymers (CPs), in particular poly(p-phenylene vinylene)s (PPVs), are recognized as “smart” materials with potential applications ranging from optoelectronic devices to emergent technologies and to precision medicine. The present communication reports on the synthesis and structural characterization of new dibrominated macromonomers and their derived PPVs, of rod–graft–coil architecture, whose grafted, biocompatible and hydrophilic side chains are either PEG-2000 or poly(2-methyl-2-oxazoline) or poly(2-ethyl-2-oxazoline). The Suzuki–Heck cascade reaction was used for PPVs’ obtainment. After PPVs’ structural characterization using specific techniques (such as ¹H-NMR; GPC), the micellar, fluorescent nanoparticles formed by spontaneous self-assembling during simple direct dissolution in water were evaluated using dynamic light scattering for their size, complementarily combined with Atom Force Microscopy (AFM) for their shape assessing. The PPV micelles’ photophysical properties were revealed using UV-vis spectroscopy and fluorescence measurements. Full article