Search Results (997)

Polypropylene (PP) dielectric capacitors are crucial for electronics and electric power systems due to their high power density. However, their relatively low energy density limits their practical application in energy storage devices, presenting a long-standing challenge. Montmorillonite (MMT), a natural phyllosilicate mineral abundantly found on earth, features a two-dimensional nanosheet structure and excellent insulating properties. MMT nanosheets have shown promise in enhancing the breakdown strength and energy storage capability of PP dielectric, but compatibility issues with the PP matrix remain a challenge. In this study, we propose a novel surface modification strategy in which polystyrene (PS)-capped MMT (PCM) nanosheets are synthesized through a polymerization–dissolution process. The modified PCM nanosheets demonstrate improved compatibility and are well dispersed within the PP matrix. Optimal loading of the PCM nanosheets effectively dissipate charge energy and hinder the growth of electric trees in the PP matrix. As a result, the PP nanocomposite with 0.2 wt% PCM nanosheets exhibits an enhanced breakdown strength of 619 MV m⁻¹ and a discharged energy density of 4.23 J cm⁻³, with an energy storage efficiency exceeding 90%. These findings provide a promising strategy for the development of high-energy-density dielectric capacitors in an economical manner. Full article

Ethylene imine-based porous polymer nanocomposites were prepared by ring-opening polymerization of 2,2-bishydroxymethylbutanol-tris [3-(1-aziridinyl)propionate] (3AZ), a tri-functional aziridine compound, in the presence of commercially available metal oxide nanoparticles, SiO₂ or ZrO₂, accompanied by polymerization-induced phase separation. The reactions with SiO₂ and ZrO₂ nanoparticles successfully yielded nanocomposite porous polymers as rigid materials. The nanocomposite porous polymers with SiO₂ and ZrO₂ nanoparticles showed characteristic surface morphologies composed of gathered particles with diameters less than 1 micrometer. These nanocomposites were effective in increasing Young’s moduli of the porous polymers due to an increase in their bulk densities. The presence of SiO₂ and ZrO₂ nanoparticles in the porous polymers efficiently retarded thermal decomposition. Full article

This manuscript reviews the green synthesis of silver nanoparticles (AgNPs) and their incorporation into polymeric nanofiber composites. It discusses various synthesis methods, emphasizing eco-friendly biological approaches over chemical and physical ones due to their cost-effectiveness and reduced toxicity. The review emphasizes the enhanced antimicrobial properties of AgNPs and their composites, particularly in electrospun nanofibers, for diverse biomedical, environmental, and industrial applications. It also covers the characterization, properties, and mechanisms of AgNPs, along with the advantages of combining them with polymers such as PVA and PEO, as well as cyclodextrin, to create novel functional nanocomposites. Full article

The quest for sustainable agriculture demands nutrient delivery systems that align productivity with environmental responsibility. This review critically evaluates stimuli-responsive starch-based biopolymer coatings for controlled-release fertilizers (CRFs), highlighting their structure, functionality, and agronomic relevance. Starch, an abundant and biodegradable polysaccharide, offers intrinsic advantages such as modifiability, film-forming ability, and compatibility with green chemistry. The paper discusses starch’s physicochemical characteristics, its functionalization to achieve responsiveness to environmental triggers (pH, moisture, temperature, ionic strength), and coating strategies like in situ polymerization, grafting, and nanocomposite integration. A comprehensive analysis of release kinetics, swelling behavior, biodegradability, and water retention is provided, followed by evaluations under simulated field conditions, encompassing various soil types, environmental stressors, and crop responses. Comparative insights with other smart biopolymers such as chitosan, alginate, and cellulose underscore starch’s unique position in CRF technology. Despite promising developments, the review identifies critical research gaps, including limitations in scalability, coordination of multi-stimuli responses, and the need for extensive field validation. This work serves as a consolidated platform for researchers, policy makers, and agro-industrial stakeholders aiming to design smart, eco-friendly fertilizers that address global food security while minimizing ecological footprints. Full article

Conductive composites are a flexible class of engineered materials that combine conductive fillers with an insulating matrix—usually made of ceramic, polymeric, or a hybrid material—to customize a system’s electrical performance. By providing tunable electrical properties in addition to benefits like low density, mechanical flexibility, and processability, these materials are intended to fill the gap between conventional insulators and conductors. The increasing need for advanced technologies, such as energy storage devices, sensors, flexible electronics, and biomedical interfaces, has significantly accelerated their development. The electrical characteristics of composite materials, including metallic, ceramic, polymeric, and nanostructured systems, are thoroughly examined in this review. The impact of various reinforcement phases—such as ceramic fillers, carbon-based nanomaterials, and metallic nanoparticles—on the electrical conductivity and dielectric behavior of composites is highlighted. In addition to conduction models like correlated barrier hopping and Debye relaxation, the study investigates mechanisms like percolation thresholds, interfacial polarization, and electron/hole mobility. Because of the creation of conductive pathways and improved charge transport, developments in nanocomposite engineering, especially with regard to graphene derivatives and silver nanoparticles, have shown notable improvements in electrical performance. This work covers the theoretical underpinnings and physical principles of conductivity and permittivity in composites, as well as experimental approaches, characterization methods (such as SEM, AFM, and impedance spectroscopy), and real-world applications in fields like biomedical devices, sensors, energy storage, and electronics. This review provides important insights for researchers who want to create and modify multifunctional composite materials with improved electrical properties by bridging basic theory with technological applications. Full article

In this study, a bio-nanocomposite integrating calcium caseinate, modified starch, and bentonite nanoclay was formulated and synthesized into film form via solution casting. Glycerol was incorporated for plasticization, and polyvinyl alcohol (PVA) was used to enhance the structural and chemical attributes of the material. The addition of PVA and bentonite notably improved the mechanical strength of the casein-based matrix, showing up to a 30% increase in tensile strength compared to similar biopolymer formulations. Water vapor permeability was significantly reduced when compared to previously reported casein–starch formulations, evidencing the barrier-positive effects of bentonite nanostructures. The microbial analysis confirmed that the quantity of bacterial colonies remained within permissible levels for non-antimicrobial biodegradable films; however, further antibacterial evaluations are advised. Biodegradability testing showed a consistent degradation trend, with full disintegration extrapolated to occur around 13 weeks under natural soil conditions. This study offers exploratory insight into the development of functional and biodegradable films using biopolymer blends and nanoclay suspensions, highlighting their potential in sustainable food packaging applications. Full article

Tetrabromobisphenol A (TBBPA) is a flame retardant widely added to polymer products. Successful isolation of target analytes from complex natural matrices relies on extraction materials that can selectively interact with the analytes. In this context, the use of magnetic nanostructured adsorbents, such as magnetic molecularly imprinted polymer systems (MMIPs), can play a key role in both selective matrix–analyte interactions and separation processes. Here, to achieve different TBBPA loadings, Fe₃O₄ nanoparticles (NPs) were coated with chitosan (CS) or (3-aminopropyl) triethoxysilane (APTES). Moreover, to further promote template–NP interactions and modulate the polymeric shell thickness of MMIPs, 3,4-dihydroxyhydrocinnamic acid (HC) was covalently bonded in different amounts to APTES-functionalized MNPs. Thermal, SEM, and elemental analyses showed a different coating degree of the nanocomposites (Fe₃O₄@CS-MIP size d = 77 nm and Fe₃O₄@APTES-MIP d = 20 nm). In addition, it was confirmed that the adsorption mechanism of TBBPA on Fe₃O₄@APTES-HCX-MIPs was due to specific interactions between the systems and the analyte, unlike non-imprinted analogs (MNIPs). Among the developed systems, the Fe3O4@APTES-HC0.7-MIP sample showed the best extraction efficiency (85%) associated with good discharge efficiency (70%). Furthermore, this nanocomposite displayed high selectivity towards TBBPA (ε > 1) and good extraction efficiency in three consecutive cycles (67%), demonstrating great potential in the environmental field. Full article

Poly(trimethylene terephthalate) (PTT) is a thermoplastic polyester with a unique structure due to having three methylene groups in the glycol unit. PTT competes with poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT) in carpets, textiles, and thermoplastic materials, primarily due to the development of economically efficient synthesis methods. PTT is widely utilized in textiles, carpets, and engineering plastics because of its advantageous properties, including quick-drying capabilities and wrinkle resistance. However, its low melting point, resistance to chemicals, and brittleness compared to PET, have limited its applications. To address some of these limitations for targeted applications, PTT nanocomposites incorporating clay, carbon nanotube, silica, and ZnO have been developed. The distribution of nanoparticles within the PTT matrix remains a significant challenge for its potential applications. Several techniques, including sol–gel blending, melt blending, in situ polymerization, and in situ forming methods have been developed to obtain better dispersion. This review discusses advancements in the synthesis of various PTT nanocomposites and the effects of nanoparticles on the isothermal and nonisothermal crystallization of PTT. Full article

The development of sustainable and functional nanocomposites has attracted considerable attention in recent years due to their broad spectrum of potential applications, including wood preservation. Also, a global goal is to reuse the large volumes of waste for environmental issues. In this context, the aim of the study was to obtain soda lignin particles, to graft ZnO nanoparticles onto their surface and to apply these hybrids, embedded into a biodegradable polymer matrix, as protection/preservation coating for oak wood. The organic–inorganic hybrids were characterized in terms of compositional, structural, thermal, and morphological properties that confirm the efficacy of soda lignin extraction and ZnO grafting by physical adsorption onto the decorating support and by weak interactions and coordination bonding between the components. The developed solution based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and lignin-ZnO was applied to oak wood specimens by brushing, and the improvement in hydrophobicity (evaluated by water absorption that decreased by 48.8% more than wood, humidity tests where the treated sample had a humidity of 4.734% in comparison with 34.911% for control, and contact angle of 97.8° vs. 80.5° for untreated wood) and UV and fungal attack protection, while maintaining the color and aspect of specimens, was sustained. L.ZnO are well dispersed into the polymer matrix, ensuring a smooth and less porous wood surface. According to the results, the obtained wood coating using both a biodegradable polymeric matrix and a waste-based preservative can be applied for protection against weathering degradation factors, with limited water uptake and swelling of the wood, UV shielding, reduced wood discoloration and photo-degradation, effective protection against fungi, and esthetic quality. Full article

A novel polyester/graphene nanocomposite fiber was produced using the in situ polymerization protocol with carboxylated graphene and melt spinning technology. The resulting nanocomposite fibers were characterized by X-ray diffraction (XRD), Raman spectroscopy, differential scanning calorimeter (DSC), and scanning electron microscope (SEM). The fibers containing 0.2 wt% graphene fraction showed an excellent dispersity of graphene nanosheets in polymeric matrix. DSC test showed that the efficient polymer-chain grafting depresses the crystallization of PET chains. This graphene-contained PET fabric exhibited attractive antibacterial properties that can be employed in fruit preservation to ensure food safety. Full article

This study investigates the effect of the surface functionalization of tungsten disulfide (WS₂) nanoparticles with aminoacetic acid (glycine) on the structure, curing behavior, and mechanical performance of epoxy nanocomposites. Aminoacetic acid, as a non-toxic, bio-based modifier, enables a sustainable approach to producing more efficient nanofillers. Functionalization, as confirmed by FTIR, EDS, and XRD analyses, led to elevated surface polarity and greater chemical affinity between WS₂ and the epoxy matrix, thereby promoting uniform nanoparticle dispersion. The strengthened interfacial bonding resulted in a notable decrease in the curing onset temperature—from 51 °C (for pristine WS₂) to 43 °C—accompanied by an increase in polymerization enthalpy from 566 J/g to 639 J/g, which reflects more extensive crosslinking. The SEM examination of fracture surfaces revealed tortuous crack paths and localized plastic deformation zones, indicating superior fracture resistance. Mechanical testing showed marked improvements in flexural and tensile strength, modulus, and impact toughness at the optimal WS₂ loading of 0.5 phr and a 7.5 wt% aminoacetic acid concentration. The surface-modified WS₂ nanoparticles, which perform dual functions, not only reinforce interfacial adhesion and structural uniformity but also accelerate the curing process through chemical interaction with epoxy groups. These findings support the development of high-performance, environmentally sustainable epoxy nanocomposites utilizing amino acid-modified 2D nanofillers. Full article

Stimuli-responsive polymers (SRPs) have garnered significant attention in recent decades due to their immense potential in biomedical and environmental applications. When these SRPs are grafted onto magnetic nanoparticles, they form multifunctional nanocomposites capable of various complex applications, such as targeted drug delivery, advanced separations, and magnetic resonance imaging. In this study, we employed a one-step hydrothermal method using 3-aminopropyltrimethoxysilane (APTES) to synthesize APTES-modified Fe₃O₄ nanoparticles (APTES@Fe₃O₄) featuring reactive terminal amine groups. Subsequently, via two consecutive surface-initiated atom transfer radical polymerizations (SI-ATRP), pH- and temperature-responsive polymer blocks were grown from the Fe₃O₄ surface, resulting in the formation of poly(itaconic acid)-block-poly(N-isopropyl acrylamide) (PIA-b-PNIPAM)-grafted nanomagnetic particles (PIA-b-PNIPAM@Fe₃O₄). To confirm the chemical composition and assess how the particle morphology and size distribution of these SRP-based nanocomposites change in response to ambient pH and temperature stimuli, various characterization techniques were employed, including transmission electron microscopy, differential light scattering, and Fourier transform infrared spectroscopy. The results indicated successful synthesis, with PIA-b-PNIPAM@Fe₃O₄ demonstrating sensitivity to both temperature and pH. Full article

Estradiol is a natural estrogen belonging to the group of natural steroid hormones. This paper presents new electrochemical biosensors—simple and low-cost tools for the determination of β-estradiol. The receptor layer of the sensor is the enzyme laccase, which was immobilized on the substrate surface using the soft plasma polymerization technique. This technique is innovative and environmentally friendly as it allows for the effective deposition of the enzyme onto unmodified and modified electrode substrates. Three types of substrates were used: an unmodified glassy carbon electrode and two electrodes modified with composite layers—multi-walled carbon nanotubes combined with CuO nanoparticles and multi-walled carbon nanotubes combined with carbon nanofibers, respectively. Biosensors modified with such materials have not been described previously. In the course of the study, electrochemical measurement conditions (composition, concentration and pH of the base electrolyte, sensor response time, and interference effects) were optimized, and sensor parameters were determined. It was found that the modification of the substrate electrode increased the sensitivity of the sensor by more than 25 times in both cases and led to a lower detection limit for the sensor modified with the carbon nanotubes/carbon nanofiber composite. The best performance was achieved with the sensor containing the carbon nanotube/carbon nanofiber composite layer, which showed a linearity range of 0.1–5 µM, a sensitivity of 7.32 ± 0.22 µA/µM, and a limit of quantification of 0.078 µM. The analytical utility of this biosensor was confirmed by its successful application in the determination of estradiol in pharmaceutical preparations and river water samples. Full article

One of the most interesting and poorly studied carriers of medicinal substances is the polymer clay composite material (PCCM). Bentonite clays are used in pharmacy for the manufacturing of various dosage forms, as well as in the adsorption of drugs to slow their release. Polymer–clay nanocomposites have demonstrated significantly improved properties compared to pure polymers. A review of recent scientific advances has shown promising results regarding the application of polymer–clay materials in medicine and bioengineering, particularly in the development of carrier sorbents with prolonged action for controlled drug release. As a result, interest in polymer–clay systems is steadily growing and gaining momentum. This paper focuses on the structure and properties of bentonite clays, including their sorption, ion exchange, binding, and rheological properties. The methods for preparing intercalated and exfoliated nanocomposites, such as radical intercalative polymerization in situ on clay surfaces, are reviewed. Furthermore, the improved efficacy and exposure times of PCCMs, combined with their enhanced bactericidal properties, are analyzed for the creation of universal and multifunctional preparations for medical use. Full article

Nowadays, there is an urgent need for efficient photocatalysts and adsorbents for environmentally relevant applications. This study investigates the effect of polyaniline (PANI) on the structure and performance of carbonized nanocomposites composed of PANI and TiO₂ nanotubes (NTs), focusing on their photocatalytic degradation efficiency and dye adsorption capacity. The hypothesis was that PANI forms conductive carbon domains and stabilizes the anatase phase during thermal treatment, enhancing the performance of TiO₂-NTs as photocatalysts. Nanocomposites based on PANI and TiO₂-NTs (TTP) were synthesized through chemical oxidative polymerization of aniline (ANI) in the presence of TiO₂-NTs using two TiO₂/ANI molar ratios of 50 and 150 and subsequently carbonized at 650 °C, yielding CTTP-50 and CTTP-150. The novel CTTP composites and carbonized pristine TiO₂-NTs (CTNT) were characterized by various techniques, including TEM, UV-Vis diffuse reflectance, Raman spectroscopy, XRD, and TGA. Their performance regarding dye adsorption and photocatalytic degradation under visible light was evaluated with Acid Orange 7, Methylene Blue, and Rhodamine B. CTTP-150 exhibited the highest adsorption capacity and photodegradation rate, attributed to the synergistic effect of PANI, which stabilizes the TiO₂ phase and enhances visible-light absorption and adsorption. Full article