Search Results (60)

Fracture-induced loss poses severe challenges to drilling operations, particularly under high-temperature and high-salinity conditions encountered in deep wells. Conventional plugging materials, characterized by relatively large particle sizes and poor structural integrity, often exhibit insufficient thermal stability and salt tolerance under extreme drilling conditions, making them prone to structural degradation and loss of adhesion, which ultimately leads to drilling fluid deterioration and downhole complications. To address this issue, a core–shell-structured microgel, ANDT-70 (named after the acronyms of 2-acrylamido-2-methylpropane sulfonic acid, N-vinyl-2-pyrrolidinone, N, N-dimethylacrylamide, dimethyl diallyl ammonium chloride, and titanium dioxide nanoparticles), was synthesized and systematically evaluated for its thermal stability, salt resistance, and interfacial adhesion capabilities. The structural evolution, dispersion behavior, and colloidal stability of the microgel were thoroughly characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman spectroscopy, and Zeta potential analysis. Experimental results indicate that ANDT-70 exhibits excellent thermal stability and resistance to salt-induced degradation at 260 °C, maintaining its fundamental structure and performance under harsh high-temperature and high-salinity conditions, with a viscosity retention of 81.10% compared with ambient conditions. Compared to representative materials reported in the literature, ANDT-70 exhibited superior tolerance to ionic erosion in saline conditions. AFM analysis confirmed that ANDT-70 significantly improves bentonite slurry dispersion and reduces salt sensitivity risks. ANDT-70 stably adsorbs onto bentonite lamellae via the synergistic action of electrostatic interactions and hydrogen bonding, thereby forming a dense cementation network that markedly enhances the structural stability and adhesion of the system. This network significantly enhances the cohesion and structural integrity of drilling fluid systems under extreme conditions. In conclusion, ANDT-70 demonstrates strong potential as a high-performance functional microgel for enhancing the stability and effectiveness of advanced drilling fluids under complex geological environments. Full article

Certain foods and specific drugs have been linked to epilepsy in the literature. Here, we query PubMed citations for the co-occurrence of epilepsy with foods and drugs, using a list of 217,776 molecules from the HMDB. Notably, the top associations with epilepsy include approved drugs and drug families, diagnostic markers, inducers, and vitamins. Drugs include fosphenytoin (40%), topiramate (37%), valproic acid (34%), hydantoin (20%), phenytoin (31%), carbamazepine (33%), carbamazepine-10,11-epoxide (40%), trimethadione (31%), gabapentin (14%), pregabalin (11%), flunarizine (7%), fenfluramine (4%), bumetanide (4%), KBr (18%), cannabidiol (14%), clonazepam (22%), nitrazepam (10%), diazepam (7%), lorazepam (6%), midazolam (3%), amobarbital (21%), phenobarbital (16%), flumazenil (7%) allopregnanolone (7%), pregnanolone (6%), epipregnanolone (6%), 3-hydroxypregnan-20-one (6%), and vitamin B6 (6%). Drug families and scaffolds include imidazolidine (18%), succinimide (10%), acetamide (7%), 2-pyrrolidinone (7%), pyrrolidine (6%), tetrahydropyridine (6%), and isoxazole (4%). Investigational compounds include cyano-7-nitroquinoxaline-2,3-dione (5%). Diagnostic markers include exametazime (10%) and quinolinic acid (3%). Inducers include flurothyl (37%), pentetrazol (32%), pilocarpine (25%), (+)-Bicuculline (8%), and 1-methyl-4-phenyl-1,2,5,6-tetrahydropyridine (MPTP, 6%). Our analysis highlights frequently cited associations between epilepsy and specific drugs and highlights the importance of supplementing nutrients with vitamin B6 and the ketogenic diet, which increases the gamma-aminobutyric acid (GABA)/glutamate ratio. As such, our study offers dietary approaches in the treatment of this neurodegenerative disease. Full article

A series of novel derivatives of 3-amino-4-hydroxybenzenesulfonamide was synthesized. As the analyzed compounds possess a sulfonamide group, the affinity of these compounds for human carbonic anhydrases (CAs) was measured by fluorescent thermal shift assay, and compound selectivity for different isoenzymes was identified. The crystal structures of the complexes of compound 25 with CAI and CAII were determined. Additionally, the activity of compounds on the viability of three cancer cell lines—human glioblastoma U-87, triple-negative breast cancer MDA-MB-231, and prostate adenocarcinoma PPC-1—was established using the MTT assay and compared to CAIX-selective and non-selective comparative compounds U-104 and acetazolamide. The half-maximal concentration (EC₅₀) was determined for the identified most active compounds, and their selectivity over fibroblasts was established. Compound 9 (inhibitor of multi-CAs) and compound 21 (not binding to CAs), considered the most promising candidates, were tested in cancer cell 3D cultures (cancer spheroids) by assessing their effect on spheroid growth and viability. Both compounds reduced the viability of spheroids from all cancer cell lines. U-87 and PPC-1 spheroids became looser in the presence of compound 9, while the growth of MDA-MB-231 spheroids was slower compared to the control. Compound 21 reduced the growth of U-87 and MDA-MB-231 3D cultures, with no significant effect on PPC-1 spheroids. Full article

Plant extracts contain many small molecules that are less investigated. The present paper aims to study in silico physical-chemical, pharmacokinetic, medicinal chemistry and lead/drug-likeness properties and the ability to interfere with the activity of P-glycoprotein (P-gp) transporter and cytochrome P450 (CYP) oxidase system in humans of phloridzin, phloretin, 4-methylchalcone metabolic series alongside the top three compounds found in the ethanolic extract from strawberries (S), namely 2,3-dihydro-3,5-dihydroxy-6-methyl-4H-pyran-4-one, 2-pyrrolidinone 5-(cyclohexylmethyl) and hexadecanoic acid. The phloridzin derivatives also were studied for their inhibitory potential upon Bcl-2, TNKS1 and COX-2 molecular targets. In vitro, Caco-2 studies analyzed the cytoprotective and anti-proliferative activity of S and the three phloridzin derivatives (pure compounds) in comparison with their combination 1:1 (GAE/pure compound, w/w), in the range 1 to 50 µg active compounds per test sample. Altogether, it was concluded that phloretin (Phl) can be used alone or in combination with S to support intestinal cell health in humans. Phloridzin (Phd) and phloridzin combined with S were proven ineffective. 4-methylchalcone (4-MeCh) combined with S indicated no advantages, while the pure compound exhibited augmented inhibitory effects, becoming a candidate for combinations with anticancer drugs. Overall, in silico studies revealed possible limitations in the practical use of phloridzin derivatives due to their potential to interfere with the activity of several major CYP enzymes. Full article

Amylin is part of the endocrine pancreatic system that contributes to glycemic control, regulating blood glucose levels. However, human amylin has a high tendency to aggregate, forming isolated amylin deposits that are observed in patients with type 2 diabetes mellitus. In search of new inhibitors of amylin aggregation, we undertook the chemical analyses of five marine macroorganisms encountered in high populations in the Red Sea and selected a panel of 10 metabolites belonging to different chemical classes to evaluate their ability to inhibit the formation of amyloid deposits in the human amylin peptide. The thioflavin T assay was used to examine the kinetics of amyloid aggregation, and atomic force microscopy was employed to conduct a thorough morphological examination of the formed fibrils. The potential ability of these compounds to interact with the backbone of peptides and compete with β-sheet formation was analyzed by quantum calculations, and the interactions with the amylin peptide were computationally examined using molecular docking. Despite their structural similarity, it could be observed that the hydrophobic and hydrogen bond interactions of pyrrolidinones 9 and 10 with the protein sheets result in one case in a stable aggregation, while in the other, they cause distortion from aggregation. Full article

In a previous study, we demonstrated a change in membrane morphology and gas separation performance by varying the recipe of a casting solution based on polysulfone in a certain solvent system. Although all results were reproducible, all used solvents were harmful and not sustainable. In this study, the solvents tetrahydrofuran (THF) and N,N-dimethylacetamide (DMAc) are replaced by the more sustainable solvents 2-methyl-tetrahydrofuran (2M-THF), N-butyl pyrrolidinone (NBP) and cyclopentyl methyl ether (CPME). The gas permeation performance and, for the first time, morphology of the membranes before and after solvent replacement were determined and compared by single gas permeation measurements and SEM microscopy. It is shown that THF can be replaced by 2M-THF and NBP without decreasing the gas permeation performance. With CPME replacing THF, no membranes were formed. Systems with 2M-THF as a THF alternative showed the best gas permeation results. Permeances for the tested gases oxygen (O₂), nitrogen (N₂), carbon dioxide (CO₂) and methane (CH₄) were 5.91 × 10⁻², 8.84 × 10⁻³, 4.00 × 10⁻¹ and 1.00 × 10⁻² GPU, respectively. Permselectivities of those membranes for the gas pairs O₂/N₂, CO₂/N₂ and CO₂/CH₄ were 6.7, 38.3 and 34.0, respectively. When also replacing DMAc in the solvent system, no or only porous membranes were obtained, even if the precipitation procedure was adjusted. These findings indicate that a complete replacement of the solvent system without affecting the membrane morphology or gas permeation performance is not possible. By varying the temperature of the precipitation bath, the formation of mechanically stable PSU membranes is possible only if THF is replaced by 2M-THF. Full article

An overview of solvent replacement strategies shows that there is great progress in green chemistry for replacing hazardous di-polar aprotic solvents, such as N,N-dimethylformamide (DMF), 1-methyl-2-pyrrolidinone (NMP), and 1,4-dioxane (DI), used in processing active industrial ingredients (APIs). In synthetic chemistry, alcohols, carbonates, ethers, eucalyptol, glycols, furans, ketones, cycloalkanones, lactones, pyrrolidinone or solvent mixtures, 2-methyl tetrahydrofuran in methanol, HCl in cyclopentyl methyl ether, or trifluoroacetic acid in propylene carbonate or surfactant water (no organic solvents) are suggested replacement solvents. For the replacement of dichloromethane (DCM) used in chromatography, ethyl acetate ethanol or 2-propanol in heptanes, with or without acetic acid or ammonium hydroxide additives, are suggested, along with methanol acetic acid in ethyl acetate or methyl tert-butyl ether, ethyl acetate in ethanol in cyclohexane, CO₂-ethyl acetate, CO₂-methanol, CO₂-acetone, and CO₂-isopropanol. Supercritical CO₂ (scCO₂) can be used to replace many organic solvents used in processing materials from natural sources. Vegetable, drupe, legume, and seed oils used as co-extractants (mixed with substrate before extraction) can be used to replace the typical organic co-solvents (ethanol, acetone) used in scCO₂ extraction. Mixed solvents consisting of a hydrogen bond donor (HBD) solvent and a hydrogen bond acceptor (HBA) are not addressed in GSK or CHEM21 solvent replacement guides. Published data for 100 water-soluble and water-insoluble APIs in mono-solvents show polarity ranges appropriate for the processing of APIs with mixed solvents. When water is used, possible HBA candidate solvents are acetone, acetic acid, acetonitrile, ethanol, methanol, 2-methyl tetrahydrofuran, 2,2,5,5-tetramethyloxolane, dimethylisosorbide, Cyrene, Cygnet 0.0, or diformylxylose. When alcohol is used, possible HBA candidates are cyclopentanone, esters, lactone, eucalytol, MeSesamol, or diformylxylose. HBA—HBA mixed solvents, such as Cyrene—Cygnet 0.0, could provide interesting new combinations. Solubility parameters, Reichardt polarity, Kamlet—Taft parameters, and linear solvation energy relationships provide practical ways for identifying mixed solvents applicable to API systems. Full article

A series of hydrazones, azoles, and azines bearing a 4-dimethylaminophenyl-5-oxopyrrolidine scaffold was synthesized. Their cytotoxic effect against human pancreatic carcinoma Panc-1 and triple-negative breast cancer MDA-MB-231 cell lines was established by MTT assay. Pyrrolidinone derivatives 3c and 3d, with incorporated 5-chloro and 5-methylbenzimidazole fragments; hydrazone 5k bearing a 5-nitrothien-2-yl substitution; and hydrazone 5l with a naphth-1-yl fragment in the structure significantly decreased the viability of both cancer cell lines. Compounds 3c and 5k showed the highest selectivity, especially against the MDA-MB-231 cancer cell line. The EC₅₀ values of the most active compound 5k against the MDA-MB231 cell line was 7.3 ± 0.4 μM, which were slightly higher against the Panc-1 cell line (10.2 ± 2.6 μM). Four selected pyrrolidone derivatives showed relatively high activity in a clonogenic assay. Compound 5k was the most active in both cell cultures, and it completely disturbed MDA-MB-231 cell colony growth at 1 and 2 μM and showed a strong effect on Panc-1 cell colony formation, especially at 2 μM. The compounds did not show an inhibitory effect on cell line migration by the ‘wound-healing’ assay. Compound 3d most efficiently inhibited the growth of Panc-1 spheroids and reduced cell viability in MDA-MB-231 spheroids. Considering these different activities in biological assays, the selected pyrrolidinone derivatives could be further tested to better understand the structure–activity relationship and their mechanism of action. Full article

The viscosity and microstructure of Li-ion battery slurries and the performance of the resulting electrodes have been shown to depend on the mixing protocol. This work applies rheology to understand the impact of shear during mixing and polymer molecular weight on slurry microstructure and electrode performance. Mixing protocols of different shear intensity are applied to slurries of LiNi_0.33Mn_0.33Co_0.33O₂ (NMC), carbon black (CB), and polyvinyldiene difluoride (PVDF) in N-methyl-2-pyrrolidinone (NMP), using both high-molecular-weight (HMW) and low-molecular-weight (LMW) PVDF. Slurries of both polymers are observed to form colloidal gels under high-shear mixing, even though unfavorable interactions between high molecular weight PVDF and CB should prevent this microstructure from forming. Theoretical analysis and experimental results show that increasing shear rate during the polymer and particle mixing steps causes polymer scission to decrease the polymer molecular weight and allow colloidal gelation. In general, electrodes made from high molecular weight PVDF generally show increased rate capability. However, high shear rates lead to increased cell variability, possibly due to the heterogeneities introduced by polymer scission. Full article

Lithium–air batteries (LABs) have a theoretically high energy density. However, LABs have some issues, such as low energy efficiency, short life cycle, and high overpotential in charge–discharge cycles. To solve these issues electrocatalytic materials were developed for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), which significantly affect battery performance. In this study, we aimed to synthesize electrocatalytic N-doped carbon-based composite materials with solution plasma (SP) using Co or Ni as electrodes from organic solvents containing cup-stacked carbon nanotubes (CSCNTs), iron (II) phthalocyanine (FePc), and N-nethyl-2-pyrrolidinone (NMP). The synthesized N-doped carbon-based composite materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM observation and XPS measurements revealed that the synthesized carbon materials contained elemental N, Fe, and electrode-derived Co or Ni, leading to the successful synthesis of N-doped carbon-based composite materials. The electrocatalytic activity for ORR of the synthesized carbon-based composite materials was also evaluated using electrochemical measurements. The electrochemical measurements demonstrated that the electrocatalytic performance for ORR of N-doped carbon-based composite material including Fe and Co showed superiority to that of N-doped carbon-based composite material including Fe and Ni. The difference in the electrocatalytic performance for ORR is discussed regarding the difference in the specific surface area and the presence ratio of chemical bonding species. Full article

Corneal disorders and diseases are prevalent in the field of clinical ophthalmology. Fungal keratitis, one of the major factors leading to visual impairment and blindness worldwide, presents significant challenges for traditional topical eye drop treatments. The objective of this study was to create biocompatible 3D-crosslinked hydrogels for drug delivery to the cornea, intending to enhance the bioavailability of ophthalmic drugs. Firstly, a series of flexible and porous hydrogels were synthesized (free-radical polymerization), characterized, and evaluated. The materials were prepared by the free-radical polymerization reaction of 1-vinyl-2-pyrrolidinone (also known as N-vinylpyrrolidone or NVP) and 1,6-hexanediol dimethacrylate (crosslinker) in the presence of polyethylene glycol 1000 (PEG-1000) as the porogen. After the physicochemical characterization of these materials, the chosen hydrogel demonstrated outstanding cytocompatibility in vitro. Subsequently, the selected porous hydrogels could be loaded with voriconazole, an antifungal medication. The procedure was adapted to realize a loading of 175 mg voriconazole per ring, which slightly exceeds the amount of voriconazole that is instilled into the eye via drop therapy (a single eye drop corresponds with approximately 100 mg voriconazole). The voriconazole-loaded rings exhibited a stable zero-order release pattern over the first two hours, which points to a significantly improved bioavailability of the drug. Ex vivo experiments using the established porcine eye model provided confirmation of a 10-fold increase in drug penetration into the cornea (after 2 h of application of the hydrogel ring, 35.8 ± 3.2% of the original dose is retrieved from the cornea, which compares with 3.9 ± 1% of the original dose in the case of eye drop therapy). These innovative hydrogel rods and rings show great potential for improving the bioavailability of ophthalmic drugs, which could potentially lead to reduced hospitalization durations and treatment expenses. Full article

The title compounds were synthesized by the reaction of 5-oxo-1-(4-(phenylamino)phenyl)pyrrolidine-3-carbohydrazide with various aldehydes bearing aromatic and heterocyclic moieties and acetophenones, and their cytotoxicity was tested via MTT assay against human triple-negative breast cancer MDA-MB-231, human melanoma IGR39, human pancreatic carcinoma Panc-1, and prostate cancer cell line PPC-1. Furthermore, the selectivity of compounds towards cancer cells compared to fibroblasts was also investigated. Four compounds were identified as the most promising anticancer agents out of a series of pyrrolidinone-hydrazone derivatives bearing a diphenylamine moiety. These compounds were most selective against the prostate cancer cell line PPC-1 and the melanoma cell lines IGR39, with EC₅₀ values in the range of 2.5–20.2 µM against these cell lines. In general, the compounds were less active against triple-negative breast cancer MDA-MB-231 cell line, and none of them showed an inhibitory effect on the migration of these cells. In the ‘wound healing’ assay, N′-((5-nitrothiophen-2-yl)methylene)-5-oxo-1-(4-(phenylamino)phenyl)pyrrolidine-3-carbohydrazide was identified as the most promising derivative that could be further developed as an antimetastatic agent. N′-(5-chloro- and N′-(3,4-dichlorobenzylidene)-5-oxo-1-(4-(phenylamino)phenyl)pyrrolidine-3-carbohydrazides most efficiently reduced the cell viability in IGR39 cell spheroids, while there was no effect of the investigated pyrrolidinone-hydrazone derivatives on PPC-1 3D cell cultures. Antioxidant activity determined via FRAP assay of N′-(1-(4-aminophenyl)ethylidene)-5-oxo-1-(4-(phenylamino)phenyl)pyrrolidine-3-carbohydrazide was 1.2 times higher than that of protocatechuic acid. Full article

Montmorillonite clay was modified by pillaring with AlMn oxides in different Al/Mn ratios and intercalation of two kinds of N-containing polymers (i.e., chitosan (CS) and polyvinyl pyrrolidinone (PVP)) chains. The modified pillared montmorillonite clay (PM) showed a rich two-dimensional layered porous structure with tunable parameters, such as large interlayer spacing, high specific area, and large porous volume. They were then used as supports for Pd nanoparticles. As applied in coupling reactions of aryl halides with terminal alkynes, Pd@CS/AlMn-PM showed better comprehensive catalytic performance than Pd@PVP/AlMn-PM. This was mainly attributed to its higher specific area, stronger chelation to Pd species, and better solvent resistance. Full article

The primary processing method of coffee plays a crucial role in determining its flavor profile. In this study, roasted coffee beans were subjected to three primary processing methods, i.e., natural processing (SC), washed processing (WC), and honey processing (MC), that were analyzed by LC-MS/MS and GC-MS metabolomics. Additionally, sensory evaluation was conducted by the Specialty Coffee Association of America (SCAA) to assess coffee flavor characteristics. The results showed that 2642 non-volatile compounds and 176 volatile compounds were detected across the three primary processing methods. Furthermore, significant differentially changed non-volatile compounds (DCnVCs) and volatile compounds (DCVCs) were detected among SC/WC (137 non-volatile compounds; 32 volatile compounds), MC/SC (103 non-volatile compounds; 25 volatile compounds), and MC/WC (20 non-volatile compounds; 9 volatile compounds). Notable compounds, such as lichenin, 6-gingerdiol 5-acetate, 3-fluoro-2-hydroxyquinoline, and 4-(4-butyl-2,5-dioxo-3-methyl-3-phenyl-1-pyrrolidiny)benzenesulfonamide, were identified as important DCnVCs, while ethyl alpha-D-glucopyranoside, 2,3-butanediol, maltol, and pentane-1,2,5-triol were identified as significant DCVCs in SC/WC. In MC/SC, 3-fluoro-2-hydroxyquinoline, etimicin, lichenin, and imazamox were important DCnVCs, whereas ethyl alpha-D-glucopyranoside, 2-pyrrolidinone, furfuryl alcohol, and pentane-1,2,5-triol were import DCVCs. Lastly, MC/WC samples exhibited notable DCnVCS, such as (S)-2-hydroxy-2-phenylacetonitrile O-[b-D-apiosyl-1->2]-b-D-glucoside], CMP-2-aminoethyphosphonate, talipexole, and neoconvallatoxoloside, along with DCVCS including citric acid, mannonic acid, gamma-lactone, 3-(1-hydroxy-1-methylethyl)benzonitrile, and maltol. Therefore, the primary processing method was a useful influence factor for coffee compositions. Full article

Candida albicans, an opportunistic yeast, is the most common cause of fungal infection. In the past decade, there has been an increase in C. albicans resistance to existing antifungal drugs, which has necessitated the development of new antifungal agents. In the present study, screening 60 compounds from the JUNIA chemical library enabled us to explore an additional 11 hybrid compounds that contain pyrrolidinone rings and hydrazine moieties for their potential antifungal activities. This chemical series was identified with fair to excellent antifungal activities. Among this series, three molecules (Hyd.H, Hyd.OCH₃, and Hyd.Cl) significantly reduced C. albicans viability, with rapid fungicidal activity. In addition, these three compounds exhibited significant antifungal activity against clinically isolated fluconazole- or caspofungin-resistant C. albicans strains. Hyd.H, Hyd.OCH₃, and Hyd.Cl did not show any cytotoxicity against human cancer cell lines up to a concentration of 50 µg/mL and decreased Candida biofilm formation, with a significant reduction of 60% biofilm formation with Hyd.OCH₃. In an infection model of Caenorhabditis elegans with C. albicans, hydrazine-based compounds significantly reduced nematode mortality. Overall, fungicidal activity was observed for Hyd.H, Hyd.OCH₃, and Hyd.Cl against C. albicans, and these compounds protected C. elegans from C. albicans infection. Full article