Search Results (179)

This study discussed the influence of acetate and sodium chloride concentration on monitoring 2,4-dichlorophenol(2,4-DCP) by electroactive bacteria. The performance of the reactor was represented by power density, and the electrochemical activity was represented by redox capacity. At the same time, micro-electrodes were used to detect the redox potential between biofilms, and the changes in extracellular polymers and microbial community structure under different conditions were also explored. With acetate concentration of 1 g/L and sodium chloride concentration of 0.0125 g/L, the electroactive microorganisms were more sensitive to toxic substances and responded fast. The biofilm also evenly covered on the surface of the carrier, which aided in the diffusion of substances. Although the maximum power density monotonically increased with acetate concentration, high concentration of substrate may mask the inhibitory effect and affect the judgment of inhibitory results. The content of protein and polysaccharide increased monotonically with sodium chloride concentration. However, more polysaccharides would lead to high resistance to electron transfer. Compared to sodium chloride, the microbial content was more affected by acetate. The electroactive microorganisms had strong adaptability to salinity. In practical application, it is conducive to increase the sensitivity of MFCs to reasonably reduce the concentration of acetic acid and sodium chloride. Full article

Polypyrrole, which belongs to the conducting polymer family, has demonstrated profound potential in advanced water purification applications due to its inherent electrical conductivity, environmental stability, and tunable surface chemistry. As a sorbent, PPy exhibits high sorption capacity for aquatic contaminants, including heavy metals, pharmaceutical compounds, and their metabolites, as well as synthetic dyes. The removal efficiency is correlated to a complex interaction mechanism involving electrostatic attractions, redox activity, and π–π stacking. Recent advances have expanded the utility by further developing nanostructured PPy-based (nano)composites, which elevate sorption performance by increasing surface area, mechanical integrity, and selective affinity. In addition, its integration into membrane technologies has enabled the design of an effective filtration system with improved selectivity and regeneration capabilities. Moreover, PPy is effective in electrochemical processes of water treatment, including capacitive deionization and electrochemically assisted sorption, opening novel paths towards energy-efficient pollutant removal. The multifunctionality of PPy as a sorbent material highlights its value as an important material for water treatment, with the capability of extended modification tailored for emerging environmental needs revised in this work. Full article

Microplastics, synthetic polymer particles measuring less than 5 mm, have become a widespread environmental pollutant, raising concerns over their possible effects on human health. Growing evidence links MPs to vascular aging and cardiovascular disease beyond their ecological toxicity. Upon inhalation, ingestion, or skin contact, microplastics can traverse biological barriers, circulate systemically, and accumulate in vascular tissues. Experimental investigations indicate that MPs, especially polystyrene and polyethylene in nano- and micro-sized forms, induce oxidative stress, mitochondrial dysfunction, and chronic inflammation. These disruptions activate redox-sensitive signaling pathways, such as NF-κB and NLRP3 inflammasome, causing endothelial dysfunction, vascular smooth muscle modulation, and foam cell production, indicating early vascular aging. Animal models and in vitro studies have consistently shown endothelial activation, increased cytokine production, and changes in vascular tone after exposure to MPs. Initial human research has detected microplastics in blood, thrombi, and atherosclerotic plaques, which correlate with negative cardiovascular outcomes and systemic inflammation. Notably, recent research suggests that the gut microbiota and antioxidant systems may play a role in adaptive reactions, although these processes are still not fully understood. MP-induced vascular toxicity is covered in this interdisciplinary review, highlighting molecular pathways, experimental data, and translational gaps. Full article

In the field of advanced electrical energy conversion and storage, remarkable attention has been given to the development of new, more sustainable electrolytes. In this regard, the combination of redox shuttles with aqueous bio-polymer gels seems to be a valid alternative via which to overcome the typical drawbacks of common liquid electrolytes such as corrosion, volatility or leakage. Despite the promising results obtained so far, redox-active species such as bis(6,6′-dimethyl-2,2′-bipyridine)copper(I) trifluoromethanesulfonylimide, ([Cu(I)(dmby)₂]TFSI), still present inherent challenges associated with their poor water solubility and oxidative lability, which prevents their employment in cheap and sustainable aqueous electrolytes. The present study investigates the stabilization of the Cu(I) complex ([Cu(I)(dmby)₂]TFSI) within two natural hydrogels based on the biopolymers κ-carrageenan and galactomannan, using ZnO nanoparticles as gelling agents. These eco-friendly and biocompatible systems are proposed as potential matrices for quasi-solid electrolytes (QSEs), offering a promising platform for advanced electrolyte design in electrochemical applications. Both hydrogels effectively stabilized and retained the redox species within their networks. In order to shed light on distinct stabilization mechanisms, complementary FTIR and SEM analyses were relevant to reveal the structural rearrangements, specific to each matrix, upon complex incorporation. Furthermore, thermogravimetric analysis confirmed notable thermal resilience in both systems, with the galactomannan-based gel demonstrating enhanced performance. Altogether, this work introduces a novel strategy for embedding copper-based redox couples into gelled electrolytes, paving the way toward their integration in real electrochemical devices, where long-term stability, redox retention, and energy conversion efficiency are critical evaluation criteria. Full article

Aqueous organic redox flow batteries (AORFBs) represent an advancing class of electrochemical energy storage systems showing considerable promise for large-scale grid integration due to their unique aqueous organic chemistry. However, the use of small-molecule active materials in AORFBs is significantly limited by the issue of stability and crossover. To address these challenges, we designed a high-water-solubility polymer cathode material, P-T-S, which features a polyvinylimidazole backbone functionalized with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and sulfonate groups. P-T-S exhibits a solubility of 34 Ah L⁻¹ in water and 31 Ah L⁻¹ in 1.0 M NaCl aqueous solution (NaCl_aq). When paired with methyl viologen to assemble a pH-neutral AORFB with a theoretical capacity of 15 Ah L⁻¹, the system exhibits a material utilization rate of 92.0%, an average capacity retention rate of 99.74% per cycle (99.74% per hour), and an average Coulombic efficiency of 98.69% over 300 consecutive cycles at 30 mA cm⁻². This work provides a new design strategy for polymer materials for high-performance AORFBs. Full article

The development of ceria (CeO_2−x)-based nanoantioxidants requires fine-tuning of structural and surface properties for enhancing antioxidant behavior in biological environments. In this contest, here ultrasmall water-dispersible CeO_2−x nanoparticles (NPs), characterized by a high Ce³⁺/Ce⁴⁺ ratio, were synthesized in a non-polar solvent and phase-transfer to an aqueous environment through ligand-exchange reactions using citric acid (CeO_2−x@Cit) and post-treatment with dopamine hydrochloride (CeO_2−x@Dopa). The concept behind this work is to enhance via surface engineering the intrinsic antioxidant properties of CeO_2−x NPs. For this purpose, thanks to electron transfer reactions between dopamine and CeO_2−x, the CeO_2−x@Dopa was obtained, characterized by increased surface Ce³⁺ sites and surface functionalized with polydopamine bearing o-quinone structures as demonstrated by complementary spectroscopic (UV–vis, FT-IR, and XPS) characterizations. To test the antioxidant properties of CeO_2−x NPs, the scavenging activity before and after dopamine treatment against artificial radical 1,1-diphenyl-2-picrylhydrazyl (DPPH^·) and the ability to reduce the reactive oxygen species in Diencephalic Immortalized Type Neural Cell line 1 were evaluated. CeO_2−x@Dopa demonstrated less efficiency in DPPH^· scavenging (%radical scavenging activity 13% versus 42% for CeO_2−x@Cit before dopamine treatment at 33 μM DPPH^· and 0.13 mg/mL loading of NPs), while it markedly reduced intracellular ROS levels (ROS production 35% compared to 66% of CeO_2−x@Cit before dopamine treatment with respect to control—p < 0.001 and p < 0.01, respectively). While steric hindrance from the dopamine-derived polymer layer limited direct electron transfer from CeO_2−x NP surface to DPPH^·, within cells the presence of o-quinone groups contributed with CeO_2−x NPs to break the autoxidation chain of organic substrates, enhancing the antioxidant activity. The functionalization of NPs with o-quinone structures represents a valuable approach to increase the inherent antioxidant properties of CeO_2−x NPs, enhancing their effectiveness in biological systems by promoting additional redox pathways. Full article

Nanomaterials’ special features enable their extensive application in chemical and biochemical nanosensors for food assays; food packaging; environmental, medicinal, and pharmaceutical applications; and photoelectronics. The analytical strategies based on novel nanomaterials have proved their pivotal role and increasing interest in the assay of key food components. The choice of transducer is pivotal for promoting the performance of electrochemical sensors. Electrochemical nano-transducers provide a large active surface area, enabling improved sensitivity, specificity, fast assay, precision, accuracy, and reproducibility, over the analytical range of interest, when compared to traditional sensors. Synthetic routes encompass physical techniques in general based on top–down approaches, chemical methods mainly relying on bottom–up approaches, or green technologies. Hybrid techniques such as electrochemical pathways or photochemical reduction are also applied. Electrochemical nanocomposite sensors relying on conducting polymers are amenable to performance improvement, achieved by integrating redox mediators, conductive hydrogels, and molecular imprinting polymers. Carbon-based or metal-based nanoparticles are used in combination with ionic liquids, enhancing conductivity and electron transfer. The composites may be prepared using a plethora of combinations of carbon-based, metal-based, or organic-based nanomaterials, promoting a high electrocatalytic response, and can accommodate biorecognition elements for increased specificity. Nanomaterials can function as pivotal components in electrochemical (bio)sensors applied to food assays, aiming at the analysis of bioactives, nutrients, food additives, and contaminants. Given the broad range of transducer types, detection modes, and targeted analytes, it is important to discuss the analytical performance and applicability of such nanosensors. Full article

Electrochromic (EC) devices are gaining increasing attention for next-generation smart windows and low-power displays due to their reversible color modulation, low operating voltage, and flexible form factors. Recently, electrochromic energy storage devices (EESDs) have emerged as a promising class of multifunctional systems, enabling simultaneous energy storage and real-time visual monitoring. In this study, we report a flexible dual-functional EESD constructed using polyaniline (PANI) films doped with anthraquinone-1-sulfonic acid sodium salt (AQS), coupled with a redox-active PVA-based gel electrolyte also incorporating AQS. The incorporation of AQS into both the polymer matrix and the gel electrolyte introduces synergistic redox activity, facilitating bidirectional Faradaic reactions at the film–electrolyte interface and within the bulk gel phase. The resulting vertically aligned PANI-AQS nanoneedle films provide high surface area and efficient ion pathways, while the AQS-doped gel electrolyte contributes to enhanced ionic conductivity and electrochemical stability. The device exhibits rapid and reversible color switching from light green to deep black (within 2 s), along with a high areal capacitance of 194.2 mF·cm⁻² at 1 mA·cm⁻² and 72.1% capacitance retention over 5000 cycles—representing a 31.5% improvement over undoped systems. These results highlight the critical role of redox-functionalized gel electrolytes in enhancing both the energy storage and optical performance of EESDs, offering a scalable strategy for multifunctional, gel-based electrochemical systems in wearable and smart electronics. Full article

In this work, we report a facile and tunable electrodeposition approach for engineering polyacrylic acid (PAA)-modified Co₃O₄ electrodes on nickel foam for high-performance asymmetric pouch-type supercapacitors. By systematically varying the PAA concentration (0.5 wt %, 1 wt %, and 1.5 wt %), we demonstrate that the CO-1 sample (1 wt % PAA) exhibited the most optimized structure and electrochemical behavior. The CO-1 electrode delivered a remarkable areal capacitance of 3467 mF/cm² at 30 mA/cm², attributed to its interconnected nanosheet morphology, enhanced ion diffusion, and reversible Co²⁺/Co³⁺/Co⁴⁺ redox transitions. Electrochemical impedance spectroscopy confirmed low internal resistance (0.4267 Ω), while kinetic analysis revealed a dominant diffusion-controlled charge storage contribution of 91.7%. To evaluate practical applicability, an asymmetric pouch-type supercapacitor device was assembled using CO-1 as the positive electrode and activated carbon as the negative electrode. The device operated efficiently within a 1.6 V window, achieving an impressive areal capacitance of 157 mF/cm², an energy density of 0.056 mWh/cm², a power density of 1.9 mW/cm², and excellent cycling stability. This study underscores the critical role of polymer-assisted growth in tailoring electrode architecture and provides a promising route for integrating cost-effective and scalable supercapacitor devices into next-generation energy storage technologies. Full article

The synthesis and characterization of two novel redox-active MOFs/CPs based on 3d transition metal ions and 3,6-ditriazolyl-2,5-dihydroxybenzoquinone (trz₂An) are reported herein. By combining trz₂An with Ni^II and Mn^II ions via the hydrothermal method, two phases, formulated as [Ni₂(trz₂An)₂]·2.5H₂O (1) and [Mn(trz₂An)(H₂O)]·1.5H₂O (2), are obtained. Both compounds crystallize as neutral polymeric 3D frameworks, where the metal ions are coordinated through the oxygen atoms of the anilate linkers forming either straight (1) or zig-zag (2) 1D chains. In particular, (1) is a MOF, where these chains are connected through the nitrogen atom at the 4 position of the triazolyl group, which completes the coordination sphere of each metal ion, affording a 3D structure containing a void volume of 28.7% and voids that can be useful for the sorption of small molecules. Interestingly, (1) and (2) show a redox behavior due to the presence of the anilate linker, being reduced electrochemically in the −0.7 to −0.9 V range due to the benzoquinone–semiquinone one-electron reduction and magnetic behavior dominated by antiferromagnetic interactions in the anilate 1D chains. Full article

Global growth in antimicrobial resistance (AMR) has accelerated the need for novel therapy beyond the scope of conventional antibiotics. In the last decade, polydopamine (PDA), a mussel-inspired polymer with redox capability, remarkable adhesion, and biocompatibility, has emerged as a universal antimicrobial coating with widespread uses. At the same time, extracellular vesicles (EVs) and particularly exosomes have gained prominence for their intrinsic cargo delivery and immune-modulating properties. Here, we summarize the synergistic value of PDA and exosome integration into multifunctional antimicrobial nanoplatforms. We discuss the inherent antimicrobial activity of PDA and exosomes; the advantages of PDA coating, including increased exosome stability, ROS generation, and surface functionalization; and current methodologies towards designing PDA-exosome hybrids. This review also mentions other antimicrobial polymers and nanocomposites that may be employed for exosome modification, such as quaternized chitosan, zwitterionic polymers, and polymer–metal composites. Most significant challenges, such as the maintenance of exosome integrity, coating uniformity, biocompatibility, scalability, and immunogenicity, are addressed. Finally, future research directions are highlighted, with emphasis on intelligent, stimulus-responsive coatings, AMP incorporation, and clinical translation. Collectively, this review underscores the promise of PDA-coated exosomes as potential antimicrobial therapeutics against AMR with potential applications in wound healing, implant protection, and targeted infection control. Full article

The accelerating global demand for sustainable and efficient energy storage has driven substantial interest in supercapacitor technology due to its superior power density, fast charge–discharge capability, and long cycle life. However, the low energy density of supercapacitors remains a key bottleneck, limiting their broader application. This review provides a comprehensive and focused overview of the latest breakthroughs in supercapacitor research, emphasizing strategies to overcome this limitation through advanced material engineering and device design. We explore cutting-edge developments in electrode materials, including carbon-based nanostructures, metal oxides, redox-active polymers, and emerging frameworks such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). These materials offer high surface area, tunable porosity, and enhanced conductivity, which collectively improve the electrochemical performance. Additionally, recent advances in electrolyte systems—ranging from aqueous to ionic liquids and organic electrolytes—are critically assessed for their role in expanding the operating voltage window and enhancing device stability. The review also highlights innovations in device architectures, such as hybrid, asymmetric, and flexible supercapacitor configurations, that contribute to the simultaneous improvement of energy and power densities. We identify persistent challenges in scaling up nanomaterial synthesis, maintaining long-term operational stability, and integrating materials into practical energy systems. By synthesizing these state-of-the-art advancements, this review outlines a roadmap for next-generation supercapacitors and presents novel perspectives on the synergistic integration of materials, electrolytes, and device engineering. These insights aim to guide future research toward realizing high-energy, high-efficiency, and scalable supercapacitor systems suitable for applications in electric vehicles, renewable energy storage, and next-generation portable electronics. Full article

The tumor microenvironment (TME) has a major role in malignancy and its complex nature can mediate tumor survival, metastasis, immune evasion, and drug resistance. Thus, reprogramming or regulating the immunosuppressive TME has a significant contribution to make in cancer therapy. Targeting TME with nanocarriers (NCs) has been widely used to directly deliver anticancer drugs to control TME, which has revealed auspicious outcomes. TME can be reprogrammed by using a range of NCs to regulate immunosuppressive factors and activate immunostimulatory cells. Moreover, TME can be ameliorated via regulating the redox environment, oxygen content, and pH value of the tumor site. NCs have the capacity to provide site-specific delivery of therapeutic agents, controlled release, enhanced solubility and stability, decreased toxicities, and enhanced pharmacokinetics as well as biodistribution. Numerous NCs have demonstrated their potential by inducing distinct anticancer mechanisms by delivering a range of anticancer drugs in various preclinical studies, including metal NCs, liposomal NCs, solid lipid NCs, micelles, nanoemulsions, polymer-based NCs, dendrimers, nanoclays, nanocrystals, and many more. Some of them have already received US Food and Drug Administration approval, and some have entered different clinical phases. However, there are several challenges in NC-mediated TME targeting, including scale-up of NC-based cancer therapy, rapid clearance of NCs by the mononuclear phagocyte system, and TME heterogeneity. In order to harness the full potential of NCs in tumor treatment, there are several factors that need to be carefully studied, including optimization of drug loading into NCs, NC-associated immunogenicity, and biocompatibility for the successful translation of NC-based anticancer therapies into clinical practice. In this review, a range of NCs and their applications in drug delivery to remodel TME for cancer therapy are extensively discussed. Moreover, findings from numerous preclinical and clinical studies with these NCs are also highlighted. Full article

The electrochromic naphthalenediimide (NDI) based monomer containing styrene pedant groups, which are capable of polymerization, was prepared, and the formation of its polymer via a photopolymerization reaction was described. Both the monomer and polymer exhibited a color change in the visible range from transparent or slightly yellow, respectively, followed by brown-red to green. This was the result of a two-step reduction reaction of NDI core to radical anion and dianion, respectively. The device constructed using the polymer as an active material was found to exhibit good electrochromic stability over 500 redox cycles. The switching times were calculated to be 18 s and 6 s for the coloration and bleaching steps, respectively. The presented results showed the usability of the photopolymerization of styrene-based monomers in the generation of the stable electrochromic layers of polymers. Full article

Wastewater management has a direct impact on the supply of drinking water. New cutting-edge technologies are crucial to the ever-growing demand for tailored solutions for pollutant removal, but these pollutants first need to be detected. Traditional techniques are costly and are no longer competitive in the wastewater cleaning market. One sustainable and economically viable alternative is the fabrication of integrated nanosensors composed of conducting polymers. These include polyaniline doped with various types of nanomaterials such as nanocarbons (carbon nanotubes and graphene), metal oxide nanoparticles/nanostructures, and quantum dots. The synergistic properties of these components can endow sensing materials with enhanced surface reactivity, greater electrocatalytic activity, as well as tunable redox activity and electrical conductivity. This review covers key recent advances in the field of non-enzyme electrochemical conductive polymer nanosensors for pollutant detection in aqueous environments or simulated polluted samples. It provides an introduction to these sensors, their preparation, applications, the environmental and economic hurdles impeding the large-scale development of PANI-based nanomaterials in sensing applications, and future directions for research and real-world applications. Full article