Search Results (1,482)

Four perovskite manganite samples, La_0.80Ag_0.20MnO₃ (LA), La_0.78Eu_0.02Ag_0.20MnO₃ (LEA), La_0.80Pb_0.05Ag_0.15MnO₃ (LPA), and La_0.77Eu_0.03Pb_0.05Ag_0.15MnO₃ (LEPA), were prepared by the Pechini sol–gel method. The samples were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and a magnetic property measurement system. A systematic investigation was conducted into the individual effects of Eu and Pb doping, as well as their co-doping, on the microstructural, magnetic and magnetocaloric properties of the materials. The results show that all samples are mainly composed of a rhombohedral perovskite phase with the R$\overline{3}$c space group, accompanied by a trace amount of Ag. Addition of Eu³⁺ and Pb²⁺ induces lattice contraction and expansion, respectively. Under the same processing conditions, the average crystallite and particle sizes of the LEA sample (45.3 nm and 0.18 μm) are smaller than those of the other three samples (69.6~80.6 nm and 0.38~0.44 μm), indicating that the introduction of Eu alone suppresses crystallization ability, which can be avoided through Eu/Pb co-doping. All samples undergo a second-order ferromagnetic–paramagnetic transition, and the Curie temperature T_C shifts to either lower or higher temperatures upon the introduction of Eu or Pb alone (from 310.8 K to 298.0 K or 318.0 K, respectively), which is attributed to the variation of the Mn³⁺/Mn⁴⁺ double-exchange (DE) interaction resulting from the ionic size mismatch and lattice distortion. In the LPA sample, an additional contribution arises from the altered Mn³⁺/Mn⁴⁺ ratio and enhanced DE interaction caused by the substitution of Pb²⁺ for Ag⁺. By modifying the Eu/Pb ratio, the T_C of the LEPA sample was tuned to 299.3 K, and its maximum magnetic entropy change was enhanced to 3.90 J·kg⁻¹·K⁻¹ ($∆$H = 2 T). These results indicate that multicomponent synergistic regulation can improve the magnetocaloric performance of La-based perovskite manganites, providing a useful strategy for the development of room-temperature magnetic refrigeration materials. Full article

Polycaprolactone (PCL) is widely utilized in bone tissue engineering due to its excellent biocompatibility and processability; however, its inherent bioinertness and hydrophobicity significantly restrict its clinical osteogenic efficacy. To overcome these limitations, we incorporated sol–gel synthesized silicate-based bioactive glass (BG) into a PCL matrix and fabricated a series of composite scaffolds with varying BG contents via direct ink writing (DIW) 3D printing. Rheological characterization confirmed that all ink formulations exhibited shear-thinning behavior, with viscosity increasing monotonically with BG content. DSC analysis revealed that BG incorporation progressively reduced the crystallinity of PCL from 51.47% to 36.23%. We systematically evaluated the physicochemical properties, mechanical resilience, and in vitro degradation behavior of these scaffolds. The results indicated that BG incorporation significantly improved the surface hydrophilicity, with the contact angle decreasing from 104.8 ± 2.81° to 69.8 ± 2.91°. Furthermore, as the BG content increased, the porosity and mechanical strength exhibited an initial increase followed by a subsequent decrease, yet all values remained within the range of human cancellous bone. Notably, cellular assays revealed that the introduction of 58SBG enhanced cell–matrix interactions; the PCL/BG scaffolds promoted superior cell attachment and more extensive morphological spreading compared to pure PCL. Among all groups, the PCL/30BG composite scaffold demonstrated the most optimal balance of mechanical integrity and biological response. Consequently, the PCL/30BG scaffold developed in this study exhibits immense potential as a bone graft substitute, providing a promising approach for clinical bone defect repair strategies. Full article

Stone heritage deteriorates through physical, chemical, and biological processes driven by water, climate, and microbial colonization. Multifunctional polymeric coatings combining hydrophobic and antimicrobial moieties have emerged as a promising conservation strategy, yet a substantial gap remains between laboratory innovation and real-world performance. This review critically examines advances from 2021 to 2026, covering wetting theory, antimicrobial mechanisms, and material architectures, including molecularly integrated systems, Sol–Gel hybrids, nanocomposites, and layered systems. Long-term studies on the Aurelian Walls in Rome and stone in Reims show that biocidal efficacy typically declines within one to two years despite the chemical persistence of the coatings. In parallel, hydrophobic performance often deteriorates over time due to UV exposure, particulate deposition, and surface chemical changes, leading to increased wettability and reduced protective efficiency. Substrate porosity governs durability and visual compatibility (ΔE* < 5 threshold), while treatments can reshape microbial communities, favoring stress-tolerant meristematic fungi. Regulatory pressure on fluorinated compounds drives the development of more sustainable alternatives. Emerging directions include stimuli-responsive systems, self-healing materials, slippery interfaces, and precision polymer architectures. However, future progress will depend on tailoring formulations to major lithotypes, improving compatibility with porous substrates, and validating performance through standardized accelerated aging and multi-year field trials. Bridging laboratory design with environmental exposure data and conservation practice will be essential for achieving durable and culturally acceptable protection strategies. Full article

Thin-film cobalt oxides have attracted increasing attention due to their visible-light activity and potential environmental applications. In this work, Co₃O₄ coatings were prepared on glass substrates through a sol–gel dip-coating process followed by thermal treatment at 450, 500, and 550 °C. Structural characterization was carried out using X-ray diffraction (XRD) and Raman spectroscopy. Diffraction patterns, together with the Raman spectra, indicate the formation of the cubic spinel phase of Co₃O₄, while sharper diffraction peaks appeared at higher annealing temperatures, indicating improved crystallinity of the films. Surface morphology was analyzed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). SEM observations revealed continuous polycrystalline coatings, whereas AFM measurements showed clear variations in surface topography and roughness produced by thermal treatment. Wettability measurements obtained from contact angle (CA) analysis indicate modifications in the surface properties of the films as the annealing temperature changes. Optical characterization performed by ultraviolet–visible spectroscopy (UV–Vis) showed strong absorption in the visible region with an indirect band gap close to 1.58 eV. Photocatalytic activity was evaluated through the degradation of methylene blue under visible-light irradiation. Degradation efficiencies of approximately 93.9%, 97.4% and 98.7% were obtained after 5 h for films annealed at 450, 500, and 550 °C, respectively. Full article

This study demonstrates the feasibility of encapsulating Paracoccus yeei VKM B-3302 cells, which contain palladium nanoparticles, within an organosilicon matrix synthesized using the sol–gel method. The resulting organosilicon material is characterized by a well-developed porous structure and a high specific surface area, ensuring the formation of a catalytic system with accessible active sites. Kinetic studies of the Mizoroki–Heck reaction showed that, although encapsulating the Pd/P. yeei catalyst in an organosilicon matrix slightly decreases its initial reaction rate, it increases the selectivity of the process and reduces the leaching of the active metal during repeated use. These results suggest the potential of encapsulating microorganisms containing metal nanoparticles in organosilicon materials to create stable hybrid catalytic systems. Full article

In this study, the indium (In) composition in amorphous indium gallium zinc oxide (a-IGZO) thin films was systematically varied from 33% to 84% using a sol–gel process. Subsequently, aluminum/IGZO/aluminum (Al/IGZO/Al) metal–semiconductor–metal (MSM) UV photodetectors were fabricated to investigate the influence of composition on the structural, optical, and photoelectric properties. The results indicate that all films maintain an amorphous structure despite the increasing In content, while the ratio of oxygen vacancies, O_vac/(M-O + O_vac), rises from 36% to 52%. Concurrently, the optical bandgap decreases from 2.92 eV to 2.32 eV. Under a bias of 20 V, the dark current increases from 2.11 × 10⁻⁹ A to 1.90 × 10⁻⁵ A as the In content rises. When illuminated by a 360 nm LED with a power density of 8.6 mW/cm², the device with 60% In exhibits a photocurrent-to-dark-current ratio of approximately 10⁴, a responsivity of 19.45 A/W, and a specific detectivity of 8.19 × 10¹² Jones. The response time and recovery time of this device are 39.8 s and 577.4 s, respectively. These findings reveal a competitive relationship between enhanced optical absorption and defect generation induced by In composition, providing valuable guidance for the performance optimization of a-IGZO UV photodetectors through compositional engineering. Full article

Sol–gel processing provides an unusually controllable route to nanoporous solids, making silica aerogels the leading reference systems for extremely low thermal conductivity due to their high porosity, nanoscale pore sizes, and tunable solid frameworks. Under near-ambient conditions, thermal transport is multi-scale and multiphase, arising primarily from coupled solid conduction through the skeletal network and gas conduction within the pore space. Accordingly, aerogel design has emphasized suppressing solid-phase transport by reducing network connectivity, increasing tortuosity, and enhancing boundary scattering, while also limiting gaseous conduction through the control of pore size and gas pressure. This critical review provides an integrated overview of these mechanisms and the theory-to-experiment toolbox used to quantify the separate and combined contributions of the solid and gas phases to the effective thermal conductivity. We link key structural and environmental parameters (porosity, pore size distribution, density, backbone morphology, and pressure) to dominant transport regimes and the assumptions embedded in common models. Classical approaches, including effective-medium and percolation-based models, are assessed alongside phonon-scaling descriptions that incorporate characteristic length scales. Particular attention is given to the Knudsen effect and pressure-sensitive gas-conduction models, which are central to interpreting performance at atmospheric conditions and under vacuum or low-pressure operation. This review highlights inconsistencies across datasets and modeling practices, identifies persistent knowledge gaps, and outlines practical directions toward processable structure–property guidelines for manufacturing aerogels with targeted thermal performance, with regard to conduction-dominated heat transport mechanisms. Full article

Since their discovery in 2009, perovskite solar cells (PSCs) have demonstrated rapid progress. Ambient-processed, carbon-based PSCs utilizing a pre-heating step offer a cost-effective fabrication route. Nevertheless, the role of the compact titanium dioxide (TiO₂-c) layer in ambient conditions has remained under-explored and inconsistently reported in the literature. This study then investigated the impact of TiO₂-c layer thickness, ranging from 70 nm to 155 nm, on the performance of PSCs fabricated entirely in ambient air with high relative humidity (RH > 70%). The layers were deposited via the sol-gel spin-coating method. Experimental results then revealed that the thinnest layer (70 nm) yielded the lowest average power conversion efficiency (PCE) of 2.05% due to diminished J_sc and V_oc values. The optimized TiO₂-c thickness was also identified at 95 nm, achieving an average PCE of 2.95% and a peak efficiency of 4.5%. Structural analysis via XRD confirmed the presence of both anatase and brookite phases. Notably, increasing the thickness from 70 nm to 155 nm resulted in a slight reduction in the anatase peak and a corresponding increase in the brookite peak. The superior performance at 95 nm could be attributed to a balanced crystal intensity between these two phases. Furthermore, TiO₂-c thickness was found to correlate with larger aggregate formation, better uniform shape grains, and reduced surface roughness, significantly influencing the morphology of the subsequent mesoporous TiO₂-m layer. These findings then provided critical insights into how thickness variation in the TiO₂-c layer could influence the performance of ambient-processed carbon-based PSCs. Full article

This study investigates the fabrication of microcapsules using Nigella sativa (N.S.) oil as the core and alginate as the shell material. The N.S. oil microcapsules were prepared using the sol–gel method with different oil concentrations. The microcapsules were applied to the cotton fabric by the pad–dry–cure method, and their attachment was evidenced by scanning electron microscopy (SEM). Air permeability measurements were conducted for all developed samples, revealing that the sample with 8 g loading of N.S. oil and 4.5 g alginate exhibited a 43% reduction compared to the pristine sample. To further investigate the comfort characteristics of the samples, the functionalized cotton samples were subjected to the water vapor permeability index test. The results yielded an index value of 90, indicating that the encapsulation process preserved the comfort characteristics of the samples. Among the samples, the specimen with an oil concentration of 8 mL displayed the maximum antibacterial performance, achieving a 90% reduction in colony-forming units (CFUs) following quantitative testing protocol. However, the qualitative antibacterial assessment indicates no clear zone of inhibition, but no bacterial growth was observed on the samples. Furthermore, the fabric incorporating the maximum loadings of N.S. oil and alginate capsules exhibited the maximum antioxidant activity of 86.5%. These results underscore the critical role of N.S. oil microcapsules in enhancing the antibacterial and antioxidant properties of cotton fabric, while also revealing a harmony between functional performance and comfort characteristics. Full article

The practical application of inorganic ferroelectric fillers in flexible piezoelectric composites is critically constrained by low polarization efficiency and severe interfacial incompatibility with polymer matrices. Herein, we report a multi-level in situ surface modification strategy that simultaneously addresses both limitations. High-purity one-dimensional tetragonal barium titanate nanofibers (BTO NFs) are first synthesized via sol–gel electrospinning combined with a two-step gradient annealing process, which precisely controls phase evolution and preserves structural continuity. To overcome the detrimental acid-induced degradation of BTO NFs during functionalization, a polydopamine (PDA) buffer layer is first conformally coated, followed by the liquid-phase deposition of a conductive polypyrrole (PPy) shell, forming a robust core–shell PPy@PBT NFs architecture. Incorporating only 4 wt% of these multifunctional fillers into a poly(vinylidene fluoride) (PVDF) matrix yields a dramatic enhancement in electromechanical performance. The resulting flexible piezoelectric energy harvesters achieve a piezoelectric coefficient (d₃₃) of 28.7 pC/N, an output voltage of 13 V, and an output current of 0.7 μA, representing substantial improvements over unmodified filler systems. This synergistic enhancement originates from the PDA-mediated interfacial stress transfer and the PPy-induced Maxwell–Wagner polarization intensification, establishing a robust and generalizable paradigm for high-performance flexible piezoelectric composites in self-powered wearable electronics. Full article

Nuclear energy has emerged as a crucial technological solution for ensuring energy security and achieving carbon neutrality goals, given its ultra-high energy density and near-zero carbon emissions against the backdrop of rapid socioeconomic development, increasing energy demands, and accelerated global transition toward low-carbon energy structures. As the core component for energy conversion in nuclear reactors, fuel elements critically determine reactor efficiency and safety performance, with the fission product retention capability of silicon carbide layers in multilayer-coated fuel particles having been thoroughly validated through high-temperature gas-cooled reactor irradiation tests. The precise sphericity control of large-sized UO₂ fuel kernels represents a fundamental requirement for enhancing tristructural isotropic (TRISO) fuel particle performance and advancing Generation IV nuclear power plant development. This study presents a sphericity control strategy based on sol–gel processing that synergistically integrates physicochemical regulation of gelling media with multi-field washing flow field optimization. By implementing silicone oil-mediated interfacial tension gradient control, we effectively suppressed gel sphere destabilization while developing an innovative three-phase sequential washing technique involving kerosene washing, anhydrous ethanol interfacial transition, and ammonia solution replacement, which significantly enhanced mass transfer diffusion in stagnant liquid films and revolutionized fuel microsphere washing technology with improved efficiency and quality. Experimental results demonstrate that this integrated approach increases kernel sphericity qualification to 99.8%, reduces washing solution consumption by 79%, and achieves an average sphericity of 1.03. The research establishes a coupling mechanism between gelling media and multi-field washing processes, elucidating the synergistic effect between interfacial tension regulation and washing optimization, thereby providing both theoretical foundations and engineering application basis for the precision manufacturing of high-performance nuclear fuels. Full article

In this study, a non-typical luminescent organosilicone was synthesized through a click reaction and used as a cross-linker to cure hydroxyl-terminated dimethylsilicone oil at room temperature via the sol–gel process, followed by application as a coating on a glass surface. This organosilicone film functions effectively as a luminescent down-shifting (LDS) material. Additionally, the presence of methyl groups and voids in the structure imparts a low refractive index, allowing it to serve as an anti-reflective (AR) layer. Optical and structural analyses on organosilicone-coated glass samples were conducted, and the dual-functional layer was applied to the glass cover of a perovskite solar panel to evaluate its performance. The coating not only enhanced light transmission as an AR layer but also converted UV light into blue light, which was absorbed by the solar cell. The results indicated improved solar panel performance, particularly in short-circuit current (Isc), external quantum efficiency (EQE) in the UV wavelength range, and overall efficiency. Overall, this material is a promising candidate for solar panel applications owing to maximized UV absorption for LDS, preserved transparency of the top cover glass, and room-temperature gelation, which facilitates repair of the dual-functional coating. Full article

Sol–gel-based optical functional sensor coatings were developed for real-time monitoring of multiphase saponification reactions in microreactors. Various pH-sensitive indicator mixtures, including bromocresol green and bromocresol purple (BCG and BCP) and methyl red–methyl orange, were incorporated into sol–gel coatings and evaluated on test plates across pH range of 2–12. Coatings with BCG and BCP 1:3 demonstrated the most pronounced color change at high pH (11–12), with distinct hue (H) transitions providing a reliable measure of local pH. These optimized coatings were integrated into microreactor channels to track the passage of oil and NaOH slugs under varying flow rates. Hue analysis produced reproducible plateaus corresponding to NaOH-rich (H = 50°) and oil-rich (H = 41°) phases, enabling droplet-level resolution of slug flow and detection of flow-regime transitions. The sensor response was fully reversible, highlighting the robustness and reusability of the coatings. Unlike previous high-resolution fluorescence-based systems, this approach relies on simple visible-light imaging and low-cost data extraction, leaving the reaction chemistry unaltered. The results demonstrate that sol–gel coatings coupled with hue-based analysis provide a practical, noninvasive, and real-time monitoring strategy for multiphase reactions in microreactors, with potential for implementation in industrial or IoT-enabled process control systems. Full article

Improving the absorption of visible light in photocatalysts could enhance photocatalytic reactions and reduce energy consumption, particularly in sunny regions like Ecuador. This study reports the synthesis of ZnO and ZnO nanoparticles doped with 1.5 at.% Er, 5 at.% Al, and 1.5 at.% Er, 5 at.% Al using the sol–gel method. The effect of doping on the structure, morphology, absorption spectra, and photocatalytic properties was analyzed by XRD, SEM, EDS, and UV-Vis spectrophotometry. XRD confirmed the presence of the wurtzite ZnO structure, and UV-Vis diffuse reflection spectra showed a red shift in the band gap for doped ZnO compared to pristine ZnO. Photocatalytic activity was evaluated through the degradation of methyl orange (MO) under artificial visible light and natural sunlight in Quito, Ecuador. ZnO doped with Er/Al nanoparticles exhibited significantly enhanced photocatalytic performance under solar light, suggesting the potential for replacing artificial light and reducing operating costs in photocatalytic processes. Moreover, all doped samples retained the antibacterial properties of ZnO against B. subtilis, and Er/Al co-doping improved the inhibition of E. coli compared to undoped ZnO. Full article

Biobased hybrid semiconducting composites are attracting significant attention as sustainable alternatives to traditional inorganic photocatalysts for environmental remediation and energy-related applications. Recent research progress in biobased hybrid photocatalytic systems is critically reviewed to outline their design strategies, photocatalytic mechanisms, and environmental applications. These composites integrate bioderived polymers with metal oxide semiconductors, forming hybrid architectures that improve interfacial contact at the molecular level, enhance charge transfer efficiency, and impart higher structural flexibility. The polymer matrix not only provides mechanical adaptability and functional surface groups, but also serves as an environmentally friendly support that can modulate surface electronic states and influence the photoinduced electron–hole dynamics in the inorganic phase. By controlling the molecular interactions between the polymer chains and metal oxide surfaces, these hybrids can mitigate key limitations of conventional metal oxides, such as rapid electron–hole recombination and restricted visible-light absorption. This review first summarizes the fundamental electronic and structural properties of widely employed metal oxide semiconductors and highlights their intrinsic limitations in photocatalytic processes. It then examines the role of biopolymers from the perspective of molecular structure, charge transport pathways, and interfacial interaction mechanisms with the inorganic component. Various synthesis strategies—including sol–gel, hydrothermal, in situ nanoparticle generation, green synthesis, and surface functionalization—are discussed, with emphasis on their ability to tune the nanoscale morphology and interfacial chemistry of the hybrids. Applications of these biohybrid systems in dye degradation, pharmaceutical pollutant removal, heavy metal reduction, and antimicrobial photocatalysis are analyzed alongside mechanistic insights into charge separation efficiency and band alignment at the molecular interface. Furthermore, challenges related to long-term stability, reproducibility, scalability, and performance in real wastewater matrices are also addressed. Overall, this review provides a thorough discussion on the design principles, photocatalytic mechanism, and environmental applications of biobased hybrid semiconductors, while emphasizing future opportunities for the development of efficient and sustainable photocatalytic systems. Full article