Search Results (4)

Quinolone antibiotics (QNs) contamination in the aquatic environment is a global public health issue considering their resistance and mobility. In this study, a simple, efficient, and sensitive method was developed for the accurate quantification of fifteen QNs in water using automated disk-based solid-phase extraction (SPE) coupled with ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS). By utilizing a 3M SDB-XC disk to enrich QNs from a 1000 mL water sample, the detection limits were improved to 0.008–0.055 ng/L due to the satisfactory enrichment factors of 897−1136, but only requiring about 60 min per six samples. The linearity of the method ranged from 0.05 to 100 μg/L for the 15 QNs, with correlation coefficients of 0.9992–0.9999, and the recoveries were in the range of 81–114%, with relative standard deviations of 0.2–13.3% (n = 6). The developed method was applicable for the quantification of trace QNs at low ng/L levels in drinking and environmental waters. The results showed that no QNs were detected in tap water, while three and four QNs were detected in the river water of Zhoushan and the seawater of Daiquyang and Yueqing Bay, East China, respectively, with a total concentration of 1.600–8.511 ng/L and 1.651–16.421 ng/L, respectively. Among the detected QNs, ofloxacin (OFL) was the predominant compound in river water, while enrofloxacin (ENR) was predominant in seawater. The risk quotient (RQ) results revealed that QNs posed a low risk to crustaceans and fish, but a low-to-medium risk to algae, and OFL presented the main ecological risk factor in river water, while ENR and CIP in seawater. Overall, the proposed automated disk-based SPE–UPLC–MS/MS method is highly efficient and sensitive, making it suitable for routine analysis of QNs in drinking and environmental waters. Full article

Agarose is known to form a homogeneous thermoreversible gel in an aqueous medium over a critical polymer concentration. The solid-liquid phase transitions are thermoreversible but depend on the molecular structure of the agarose sample tested. The literature has mentioned that agarose gels could remain stable in non-solvents such as acetone or ethanol. However, there has been no characterization of their behavior nor a comparison with the gels formed in a good solvent such as water. In the first step of this article, the structure was characterized using ¹H and ¹³C NMR in both D₂O and DMSO-d6 solvents. DMSO is a solvent that dissolves agarose regardless of the temperature. First, we have determined a low yield of methyl substitution on the D-galactose unit. Then, the evolution of the ¹H NMR spectrum was monitored as a function of temperature during both increasing and decreasing temperature processes, ranging from 25 to 80 °C. A large thermal hysteresis was obtained and discussed, which aided in the interpretation of rheological behavior. The hysteresis of NMR signals is related to the mobility of the agarose chains, which follows the sol/gel transition depending on the chains’ association with H-bonds between water and the -OH groups of agarose for tightly bound water and agarose/agarose in chain packing. In the second step of the study, the water in the agarose gel was exchanged with ethanol, which is a non-solvent for agarose. The resulting gel was stable, and its properties were characterized using rheology and compared to its behavior in aqueous media. The bound water molecules that act as plasticizers were likely removed during the exchange process, resulting in a stronger and more brittle gel in ethanol, with higher thermal stability compared to the aqueous gel. It is the first time that such gel is characterized without phase transition when passing from a good solvent to a non-solvent. This extends the domains of application of agarose. Full article

Two new ultra-high performance liquid chromatography (UHPLC) methods for analyzing 21 selected antivirals and their metabolites were optimized, including sample preparation step, LC separation conditions, and tandem mass spectrometry detection. Micro-solid phase extraction in pipette tips was used to extract antivirals from the biological material of Hanks balanced salt medium of pH 7.4 and 6.5. These media were used in experiments to evaluate the membrane transport of antiviral drugs. Challenging diversity of physicochemical properties was overcome using combined sorbent composed of C₁₈ and ion exchange moiety, which finally allowed to cover the whole range of tested antivirals. For separation, reversed-phase (RP) chromatography and hydrophilic interaction liquid chromatography (HILIC), were optimized using extensive screening of stationary and mobile phase combinations. Optimized RP-UHPLC separation was carried out using BEH Shield RP18 stationary phase and gradient elution with 25 mmol/L formic acid in acetonitrile and in water. HILIC separation was accomplished with a Cortecs HILIC column and gradient elution with 25 mmol/L ammonium formate pH 3 and acetonitrile. Tandem mass spectrometry (MS/MS) conditions were optimized in both chromatographic modes, but obtained results revealed only a little difference in parameters of capillary voltage and cone voltage. While RP-UHPLC-MS/MS exhibited superior separation selectivity, HILIC-UHPLC-MS/MS has shown substantially higher sensitivity of two orders of magnitude for many compounds. Method validation results indicated that HILIC mode was more suitable for multianalyte methods. Despite better separation selectivity achieved in RP-UHPLC-MS/MS, the matrix effects were noticed while using both chromatographic modes leading to signal enhancement in RP and signal suppression in HILIC. Full article

Analysis of scanning electron microscopy images was used to study the changes in the crystal size distribution of ZnO, which occurred during its processing in an aqueous medium at 220–255 °C and an equilibrium vapor pressure in an autoclave. The results were compared with those of ZnO placed in a die for treatment under similar conditions supplemented with mechanical pressure application in the cold sintering process. In both cases, ZnO was treated in the presence of an activating additive: either zinc acetate or ammonium chloride. During autoclaving, a powder consisting of fine ZnO monocrystals was obtained, while the cold sintering process led to ceramics formation. Under vapor pressure and mechanical pressure, the aqueous medium affected ZnO transformation by the same mechanism of solid-phase mobility activation due to the additives’ influence. The higher the content of additives in the medium, and the higher the mechanical pressure, the more pronounced activating effect was observed. Mass transfer during the cold sintering process occurred mainly by the coalescence of crystals, while without mechanical pressure, the predominance of surface spreading was revealed. In the initial ZnO powder, the average crystal size was 0.193 μm. It grew up to 0.316–0.386 μm in a fine-crystalline powder formed in the autoclave and to an average grain size of 0.244–0.799 μm in the ceramics, which relative density reached 0.82–0.96. A scheme explaining the influence of an aqueous medium on the solid-phase mobility of ZnO structure was proposed. It was found that the addition of 7.6 mol% ammonium chloride to the reaction medium causes the processes of compaction and grain growth similar to those observed in ZnO Cold Sintering Process with the addition of 0.925 mol% zinc acetate. Full article