Search Results (141)

A one-pot synthetic methodology that combines an Ugi-Zhu three-component reaction (UZ-3CR) with a cascade sequence (intermolecular aza Diels–Alder cycloaddition/intramolecular N-acylation/decarboxylation/dehydration) using microwave-heating conditions, ytterbium (III) triflate (Yb(OTf)₃) as the catalyst, and chlorobenzene (for the first time in a multi-component reaction (MCR)) as the solvent, was developed to synthesize twelve new fluorinated-pyrrolo[3,4-b]pyridin-5-ones containing a 4-amino-7-chloroquinoline moiety, yielding 50–77% in 95 min per product, with associated atom economies around 88%, also per product. Additionally, by in vitro tests, compounds 19d and 19i were found to effectively stop early SARS-CoV-2 replication, IC₅₀ = 6.74 µM and 5.29 µM, at 0 h and 1 h respectively, while cell viability remained above 90% relative to the control vehicle at 10 µM. Additional computer-based studies revealed that the most active compounds formed strong favorable interactions with important viral proteins (M_pro, NTDα and NTDo) of coronavirus, supporting a two-pronged approach that affects both how the virus infects the cells and how it replicates its genetic material. Finally, quantum chemistry analyses of non-covalent interactions were performed from Density-Functional Theory (DFT) to better understand how the active compounds hit the virus. Full article

Reported herein is a further expansion of the cooperatively catalyzed Koenigs–Knorr glycosylation reaction, known as “the 4K reaction”. It has been discovered that molecular iodine, along with a metal salt and an acid additive, can activate thioglycosides. Previous mechanistic studies showed the interaction of the anomeric sulfur with thiophilic iodine; this complex is stable until the halophilic metal salt and the acid additive are added. This new avenue has allowed for the investigation of halophilic promoters that would not activate thioglycosides without iodine. Presented herein is the recent discovery of iron(III) triflate as an efficient activator of thioglycosides via the 4K reaction pathway. Full article

The efficient synthetic routes and evaluates cytotoxic profiles of denitroaristolochic acids II–V (DAA-II–V) were demonstrated in this study. Based on retrosynthetic analysis, a modular synthetic strategy was developed through Suzuki–Miyaura coupling, Wittig reaction, and bismuth triflate-catalyzed intramolecular Friedel–Crafts cyclization to efficiently construct the phenanthrene core. Process optimization significantly improved yields: aryl bromide intermediate A reached 50.8% yield via bromination refinement, while arylboronic ester intermediate B overcame selectivity limitations. Combining Darzens condensation with Wittig reaction enhanced throughput, achieving 88.4% yield in the key cyclization. Structures were confirmed by NMR and mass spectra. CCK-8 cytotoxicity assays in human renal proximal tubular epithelial cells revealed distinct toxicological profiles: DAA-III and DAA-IV exhibited IC₅₀ values of 371 μM and 515 μM, respectively, significantly higher than the nitro-containing prototype AA-I (270 μM), indicating that the absence of nitro group attenuates but does not eliminate toxicity, potentially via altered metabolic activation. DAA-II and DAA-V showed no detectable cytotoxicity within assay limits, suggesting reduced toxicological impact. Structure–activity analysis exhibited that the nitro group is not essential for cytotoxicity, with methoxy substituents exerting limited influence on potency. This challenges the conventional DNA adduct-dependent toxicity paradigm, implying alternative mechanisms like oxidative stress or mitochondrial dysfunction may mediate damage in denitro derivatives. These systematic findings provide new perspectives for AA analog research and a foundation for the rational use and safety assessment of Aristolochiaceae plants. Full article

Carbon dioxide, the primary greenhouse gas responsible for global warming, represents today a critical environmental challenge for humans. Mitigating CO₂ emissions and other greenhouse gases is a pressing global concern. The primary goal of this study is to investigate the potential of particular ionic liquids (ILs) in capturing CO₂ for the sweetening of natural and other gases. The solubility of CO₂ was measured in three distinct ILs, which shared a common anion (triflate, TfO) but differed in their cations. The selected ionic liquids were {1-butyl-3-methylimidazolium triflate [BMIM][TfO], 1-butyl-1-methylpyrrolidinium triflate [BMP][TfO], and 1-butyl-4-methylpyridium triflate [MBPY][TfO]}. The solvents were screened based on results from a molecular computational study that predicted low CO₂ Henry’s Law constants. Solubility measurements were conducted at 303.15 K, 323.15 K, and 343.15 K and pressures up to 1.5 MPa using a gravimetric microbalance (IGA-003). The CO₂ experimental results were modeled using the Peng–Robinson Equation of state with three mixing rules: van der Waals one (vdWI), van der Waals two (vdWII), and the non-random two-liquid (NRTL) Wong–Sandler (WS) mixing rule. For the three ILs, the NRTL-WS mixing rule regressed the data with the lowest average deviation percentage of 1.24%. The three solvents had similar alkyl chains but slightly different polarities. [MBPY][TfO], with the largest size, exhibited the highest CO₂ solubility at all three temperatures. Calculation of its relative polarity descriptor (N) shows it was the least polar of the three ILs. Conversely, [BMP][TfO] showed the highest Henry’s Law constant (lowest solubility) across the studied temperature range. Comparing the results to published data, the study concludes that triflate-based ionic liquids with three fluorine atoms had lower capacity for CO₂ compared to bis(trifluoromethylsulfonyl) imide (Tf2N)-based ionic liquids with six fluorine atoms. Additionally, the study provided data on the enthalpy and entropy of absorption. A final comparison shows that the ILs had a lower CO₂ capacity than Selexol, a solvent widely used in commercial carbon capture operations. Compared to other ILs, the results confirm that the type of anion had a more significant impact on solubility than the cation. Full article

This work presents the synthesis routes for the first representatives of cadmium complexes based on 1,2-bis(arylimino)acenaphthene (Ar-bian). The reaction of CdCl₂ with bis-(2,4,6-trimethylphenylimino)acenaphthene (tmp-bian) in a 1-to-1 molar ratio led to a dimeric complex [Cd₂(tmp-bian)₂Cl₂(µ-Cl)₂] (1). Further treatment of complex 1 with silver triflate as a chloride-eliminating agent, followed by the addition of one equivalent of tmp-bian, resulted in the formation of a mixture consisting of [Cd₂(tmp-bian)₂(H₂O)₄(µ-Cl)₂](OTf)₂ (2) and [Cd(tmp-bian)₂(OTf)₂] (3). To obtain complex 3 in its individual form, a reaction of Cd(OTf)₂ with two equivalents of tmp-bian was carried out. The characterization of the complexes was conducted through a range of analytical methods, including X-ray diffraction analysis, elemental analysis, as well as IR and ¹H NMR-spectroscopies. Redox properties of 1 and 3 were investigated by means of cyclic voltammetry. Cyclic voltammograms revealed irreversible reduction processes centered on the tmp-bian ligand, which were confirmed by quantum chemical calculations. Full article

A facile and efficient synthesis of functionalized 1,4-benzodiazepine derivatives under mild conditions was developed. The CuI/N,N-dimethylglycine-catalyzed intramolecular cross-coupling reaction of 1-(2-bromobenzyl)azetidine-2-carboxamides proceeded smoothly under mild conditions to provide 1,4,9,10a-tetrahydroazeto[1,2-a]benzo[e][1,4]diazepin-10(2H)-ones. The resulting azetidine-fused 1,4-benzodiazepine compounds underwent consecutive N-methylation with methyl triflate and the opening of the four-membered heterocyclic ring by NaN₃, KCN and PhSNa to produce diverse 1,4-benzodiazepine derivatives in good to excellent yields. Upon treatment with methyl chloroformate, on the other hand, the 1,4,9,10a-tetrahydroazeto[1,2-a]benzo[e][1,4]diazepin-10(2H)-ones were straightforwardly converted into 2-chloroethyl-substituted 1,4-benzodiazepine derivatives. Full article

Understanding the reaction pathway of aldehyde deformylation catalyzed by natural enzymes has shown significance in developing synthetic methodologies and new catalysts in organic, biochemical, and medicinal chemistry. However, unlike other well-rationalized chemical processes catalyzed by cytochrome P450 (Cyt P450) superfamilies, the detailed mechanism of the P450-catalyzed aldehyde deformylation is still controversial. Challenges lie in establishing synthetic models to decipher the reaction pathways, which normally are homogeneous systems for precisely mimicking the structure of the active sites in P450s. Herein, we report a heterogeneous Cyt P450 aromatase mimic based on a porphyrinic metal–organic framework (MOF) PCN-224. Through post-metalation of iron(II) triflate with the porphyrin unit, a five-coordinated Fe^II(Porp) compound could be afforded and isolated inside the resulting PCN-224(Fe) to mimic the heme active site in P450. This MOF-based P450 mimic could efficiently catalyze the oxidative deformylation of aldehydes to the corresponding ketones under room temperature using O₂ as the sole oxidant and triethylamine as the electron source, analogous to the NADPH reductase. The catalyst could be completely recovered after the catalytic reaction without undergoing structural decomposition or compromising its reactivity, representing it as one of the most valid mimics of P450 aromatase from both the structural and functional aspects. A mechanistic study reveals a strong correlation between the catalytic activity and the C^α-H bond dissociation energy of the aldehyde substrates, which, in conjunction with various trapping experiments, confirms an unconventional mechanism initiated by hydrogen atom abstraction. Full article

Salens are a class of important ligands and have been widely applied in asymmetric catalytic organic reactions. Enlarged salen-like ligands containing flexible chains were synthesized from L-phenylalanine, ethane/propanediamines, and salicylaldehydes, and successfully utilized in the scandium-catalyzed enantioselective Michael addition of indoles and enones (2-cinnamoylpyridine 1-oxides). The catalytic system demonstrates excellent reactivity and stereoselective control over electron-rich indole substrates with up to 99% yield and 99% enantiomeric excess. The enlarged Salen ligands with flexible and rigid combined linkers fit their coordination with large rare earth elements. Their coordination abilities were tuned by the electronic effect of substituents on their salicylaldehyde moiety, facilitating the construction of excellent chiral environments in the scandium(III)-catalyzed asymmetric Michael addition of indoles to 2-cinnamoylpyridine 1-oxides. Full article

Background: The radiotracer [¹⁸F]JK-PSMA-7, a prostate cancer imaging agent for positron emission tomography (PET), was previously synthesized by indirect radiofluorination using an ¹⁸F-labeled active ester as a prosthetic group, which had to be isolated and purified before it could be linked to the pharmacologically active Lys-urea-Glu motif. Although this procedure could be automated on two-reactor modules like the GE TRACERLab FX2N (FXN) to afford the tracer in modest radiochemical yields (RCY) of 18–25%, it is unsuitable for cassette-based systems with a single reactor. Methods: To simplify implementation on an automated synthesis module, the radiosynthesis of [¹⁸F]JK-PSMA-7 was devised as a one-pot, two-step reaction. The new method is based on direct (“late-stage”) radiofluorination of an appropriate onium triflate precursor and subsequent deprotection with ortho-phosphoric acid. It was successfully established on the cassette-based Trasis AllInOne (AIO) module. Results: Overall, the new protocol enabled the production of [¹⁸F]JK-PSMA-7 in activity yields of 39 ± 4% (RCY = 58%) with an overall synthesis time of about 1 h. In a single production run with an initial activity of 36-43 GBq, 13-19 GBq of [¹⁸F]JK-PSMA-7 with a radiochemical purity of >99% was obtained. Conclusions: We have established a highly reliable, GMP-compliant process for the automated radiosynthesis of [¹⁸F]JK-PSMA-7 on the Trasis AllinOne (AIO) synthesizer, ensuring consistent and efficient production of this radioligand. Full article

In-situ polymerization is an effective method for integrating co-catalysts homogeneously into the polymer matrix. Polyacrylonitrile (PAN)-derived highly graphitized carbon is a state-of-the-art material with diverse applications, including materials for energy storage devices, electrocatalysis, sensing, adsorption, and making structural composites of various technologies. Such highly graphitized materials can be effectively obtained through in-situ polymerization. The addition of external catalysts during in-situ polymerization not only enhances the polymerization rate but also facilitates the degree of graphitization and quality of graphitic carbon upon graphitization at moderate temperatures. In this study, we apply an in-situ polymerization technique to integrate aluminum triflate (Al(OTf)₃) and zirconocene dichloride (C₅H₅)₂ZrCl₂ co-catalyst into a boronated polyacrylonitrile (B-PAN) matrix. The in-situ polymerization ensures the uniform distribution of the co-catalyst without aggregation, facilitating the formation of a well-ordered graphitic structure at a moderated temperature. Boronated polyacrylonitrile (B-PAN) solutions, with and without co-catalyst (Al(OTf)₃, (C₅H₅)₂ZrCl₂ or both) were prepared through polymerization process, dried in an oven, and then subjected to graphitization at 1250 °C with a heating rate of 1 °C min⁻¹ for 1 h under an N₂ atmosphere. The resulting graphitic carbon was characterized to determine the impact of co-catalyst on the degree of graphitization. This study provides valuable insights into synthesizing high-quality graphitic carbon materials, offering promising pathways for their scalable production through the strategic use of in-situ polymerization and co-catalysis. These materials have potential applications in various fields, including environmental technologies, energy storage, and conversion, offering a pathway to design facile and economical graphitic carbon materials. Full article

We have previously reported that thiazolylketol acetates, synthesized by the addition of 2-lithiothiazole to sugar lactones followed by acetylation, are efficient glycosyl donors affording O-, N-, P-, and C-glycosides. After the first example of C-glycosidation recently described by us, we report here on the unexpected outcome of the reaction of a thiazolylketol acetate with allyltrimethylsilane in the presence of trimethylsilyl triflate. The obtained intermediate, an intramolecular N-thiazolium salt, could be stereoselectively converted into the desired allyl C-thiazolylketoside. Full article

Using methods of DFT, we investigated the effect of electron withdrawing and electron donating groups on the relative stability of tentative glycosyl donor reaction intermediates. The calculation shows that by changing the stereoelectronic properties of the protecting group, we can influence the stability of the dioxolenium type of intermediates by up to 10 kcal mol⁻¹, and that by increasing nucleophillicity of the 4-O-Bz group, the dioxolenium intermediate becomes more stable than a triflate–donor pair. We exploited this mechanism to design galactosyl donors with custom protecting groups on O2 and O4, and investigated the outcome of the reaction with cyclohexanol. The reaction showed no change in the product distribution, which suggests that the neighboring group participation takes precedence over remote group participation due to kinetic barriers. Full article

Biomass-based and biodegradable poly(l-lactide) (PLLA) is synthesized by ring-opening polymerization of l-lactide (LLA), for which tin(II) 2-ethylhexanoate is a major catalyst. However, the potential toxicity of tin can be a problem, especially in biomedical applications. In this study, we focused on iron, which is a non-toxic metal and an abundant resource. We investigated the ring-opening homo- and copolymerization of cyclic esters such as LLA and ε-caprolactone (CL) catalyzed by iron(III) triflate, Fe(OTf)₃, which is commercially available and known as a Lewis acid. In the polymerization of LLA in toluene at 110 °C, Fe(OTf)₃ showed relatively high activity and yielded PLLA with unimodal molecular weight distribution. The addition of 1,8-bis(dimethylamino)naphthalene (proton sponge: PS) to the Fe(OTf)₃ catalyst system increased the yield and molecular weight of the resulting polymer. In contrast, the polymerization of CL by Fe(OTf)₃ was decelerated by the presence of PS. The Fe(OTf)₃ system was found to have an exceptionally high preference for CL over LLA in the copolymerization of LLA and CL, with the reactivity ratio of r_LLA = 0.51 and r_CL = 6.9. In contrast, the Fe(OTf)₃–2PS system exhibited an LLA preference with r_LLA = 15 and r_CL = 0.22, indicating that the comonomer selectivity changed depending on the presence or absence of PS. While the LLA polymerization rate by the Fe(OTf)₃ system showed a second-order dependence on the Fe(OTf)₃ concentration, that of the Fe(OTf)₃–PS system showed a first-order dependence on the Fe(OTf)₃–PS concentration. Full article

The urgent need for sustainable, low-emission energy solutions has positioned proton exchange membrane fuel cells (PEMFCs) as a promising technology in clean energy conversion. Polysulfone (PSF) membranes with incorporated ionic liquid (IL) and hydrophobic polydimethylsiloxane-functionalized silica (SiO₂-PDMS) were developed and characterized for their potential application in PEMFCs. Using a phase inversion method, membranes with various combinations of PSFs, SiO₂-PDMS, and 1-butyl-3-methylimidazolium triflate (BMI.TfO) (1–10 wt%) were prepared and characterized to assess their morphology, porosity, wettability, ionic conductivity, and thermal stability. Incorporating IL significantly altered the membrane structure, increasing porosity and surface roughness, while SiO₂-PDMS enhanced IL retention, reducing leakage by up to 32%. Proton conductivity increased by up to 30 times compared to pure PSF, and membranes exhibited high hydrophilicity at optimal IL concentrations. This work highlights the potential of IL and silica-based membranes for practical applications in PEMFCs. Full article