Search Results (25)

Ocular disorders such as keratitis, glaucoma, age-related macular degeneration (AMD), diabetic retinopathy (DR), and dry eye disease (DED) are highly prevalent worldwide and remain major causes of visual impairment and blindness. Conventional therapeutic approaches for ocular diseases, such as eye drops, surgery, and laser therapy, are frequently hampered by limited drug bioavailability, rapid clearance, and treatment-related complications, primarily due to the eye’s unique anatomical and physiological barriers. Hydrogels, characterized by their three-dimensional network structure, high water content, excellent biocompatibility, and tunable physicochemical properties, have emerged as promising platforms for ophthalmic drug delivery. This review summarizes the classification, fabrication strategies, and essential properties of hydrogels, and highlights recent advances in their application to ocular diseases, including keratitis management, corneal wound repair, intraocular pressure regulation and neuroprotection in glaucoma, sustained drug delivery for AMD and DR, vitreous substitutes for retinal detachment, and therapies for DED. In particular, we highlight recent advances in stimuli-responsive hydrogels that enable spatiotemporally controlled drug release in response to ocular cues such as temperature, pH, redox state, and enzyme activity, thereby enhancing therapeutic precision and efficacy. Furthermore, this review critically evaluates translational aspects, including long-term ocular safety, clinical feasibility, manufacturing scalability, and regulatory challenges, which are often underrepresented in existing reviews. By integrating material science, ocular pathology, and translational considerations, this review aims to provide a comprehensive framework for the rational design of next-generation hydrogel systems and to facilitate their clinical translation in ophthalmic therapy. Full article

Hydrogel-based vitreous substitutes have been considered as a potential solution for the treatment of retinal disorders, especially when the natural vitreous body is damaged due to trauma, disease, or surgery. With their high-water content, biocompatibility, and tunable mechanical properties, these hydrogels offer a promising alternative to traditional vitreous substitutes. This review explores the role of polymers and crosslinkers in the development of hydrogel-based substitutes, focusing on how these components contribute to the structure and function of hydrogels. The choice of natural polymers, such as hyaluronic acid and collagen, or synthetic ones, such as polyethylene glycol and polyvinyl alcohol, is crucial to mimic the transparency and flexibility of the vitreous body. Crosslinking methods, including physical, chemical, and enzymatic approaches, help control the gelation process and enhance the mechanical strength of the hydrogel. Furthermore, this review demonstrates how these hydrogels interact with biological tissues, which enhances biocompatibility, cell growth, and tissue repair. This review also discusses the challenges and future directions in improving these hydrogels, particularly in terms of long-term stability, integration with ocular tissues, and appropriate mechanical properties. Overall, hydrogel-based vitreous substitutes have significant potential to improve surgical outcomes and restore vision for patients with vitreous injury. Full article

This study extends the application of photothermal spectroscopy to explore heat transfer dynamics in biological fluids, focusing on the examination of artificial vitreous humor (VH) models of human VH and an endogenous sample of cervine (deer) VH. The research integrates previously established methods for analyzing thermal lensing through photothermal deflection. By visualizing convective and conductive heat transfer processes in the artificial components of human VH, one gains insights into the dynamic behavior of heat transfer in the VH. Relevance extends to clinical cases where pathology requires replacement of endogenous VH with an artificial VH substitute. Several VH substitutes identified in the literature were chosen for this study based on their physical properties and relative abundance in the VH. Individual component fluids, and mixtures of these components, were analyzed at various concentrations based on their physiological concentration ranges in the human VH as they varied with age, sex, and certain disease states. By way of comparison to endogenous biological VH, a sample of VH obtained from a female white-tailed deer eye was analyzed, enhancing the understanding of heat transfer in artificial components of the VH compared to endogenous VH. There is a vast array of ophthalmological procedures that utilize an external heat source interacting with endogenous or artificial VH. The data found in this study will progress the understanding of heat transfer within artificial VH components in comparison to endogenous VH and contribute to the advancement of certain ophthalmological procedures. Full article

Collagen is considered to be an intercellular adhesive that prevents tissue stretching or damage. It is widely utilized in cosmetic skin solutions, drug delivery, vitreous substitutions, 3D cell cultures, and surgery. In this study, we report the development of a green technology for manufacturing collagen peptides from flatfish skin using ultrasound and enzymatic treatment and a subsequent assessment on skin functionality. First, flatfish skin was extracted using ultrasound in distilled water (DW) for 6 h at 80 °C. Molecular weight analysis via high-performance liquid chromatography (HPLC) after treatment with industrial enzymes (alcalase, papain, protamex, and flavourzyme) showed that the smallest molecular weight (3.56 kDa) was achieved by adding papain (0.5% for 2 h). To determine functionality based on peptide molecular weight, two fractions of 1100 Da and 468 Da were obtained through separation using Sephadex™ G-10. We evaluated the effects of these peptides on protection against oxidative stress in human keratinocytes (HaCaT) cells, inhibition of MMP-1 expression in human dermal fibroblast (HDF) cells, reduction in melanin content, and the inhibition of tyrosinase enzyme activity in murine melanoma (B16F10) cells. These results demonstrate that the isolated low-molecular-weight peptides exhibit superior skin anti-oxidant, anti-wrinkle, and whitening properties. Full article

Anti-VEGF agents, e.g., bevacizumab, are used in retinal surgery, while their interaction with silicone oils and novel hydrogels remains unclear. This study examines the in vitro pharmacokinetics of bevacizumab in silicone oil-filled eyes compared to various hydrogel replacements and the porcine vitreous body as well as its impact on the interface tension of silicone oils. An in vitro model filled with light or heavy silicone oil, porcine vitreous bodies, or hydrogels (alginate and polyethylene glycol (PEG)-based) was equilibrated with a balanced salt solution. Monitoring of bevacizumab in the aqueous phase was conducted for up to 24 h, and its effect on interfacial tension was studied. Significant differences in bevacizumab partitioning were observed across endotamponades after 24 h. In silicone oils, bevacizumab was found exclusively in the aqueous phase, while in the other endotamponades, it accumulated in the gel phase (96.1% in porcine vitreous body, 83.5% in alginate, and 27.6% in PEG-based hydrogel). Bevacizumab significantly reduced interfacial tension (40 to 8 mN/m), possibly enhancing silicone oil emulsification. The type of endotamponade heavily influenced the bevacizumab concentration in the aqueous. The vitreous body and replacement hydrogels likely serve as a drug reservoir, highlighting the need for in vivo studies to explore these interactions prior to clinical application. Full article

To treat certain vitreoretinal diseases, the vitreous body, a hydrogel composed of mostly collagen and hyaluronic acid, must be removed. After vitrectomy surgery, the vitreous cavity is filled with an endotamponade. Previously, pre-clinical hydrogel-based vitreous body substitutes either made from uncrosslinked monomers (1st generation), preformed crosslinked polymers (2nd generation), or in situ gelating polymers (3rd generation) have been developed. Forward light scattering is a measure of Stray light induced by optical media, when increased, causing visual disturbance and glare. During pinhole surgery, the hydrogels are injected into the vitreous cavity through a small 23G-cannula. The aim of this study was to assess if and to what extent forward light scattering is induced by vitreous body replacement hydrogels and if Stray light differs between different generations of vitreous body hydrogel replacements due to the different gelation mechanisms and fragmentation during injection. A modified C-Quant setup was used to objectively determine forward light scattering. In this study, we found that the 1st and 3rd generation vitreous body replacements show very low stray light levels even after injection (2.8 +/− 0.4 deg²/sr and 0.2 +/− 0.2 deg²/sr, respectively) as gel fragmentation and generation of interfaces is circumvented. The 2nd generation preformed hydrogels showed a permanent increase in stray light after injection that will most likely lead to symptoms such as glare when used in patients (11.9 +/− 0.9 deg²/sr). Stray light of the 2nd generation hydrogels was 3- and 2-fold increased compared to juvenile and aged vitreous bodies, respectively. In conclusion, this significant downside in the forward light scattering of the 2nd generation hydrogels should be kept in mind when developing vitreous body replacement strategies, as any source of stray light should be minimized in patients with retinal comorbidities. Full article

Polydimethylsiloxane (PDMS) is a substitute for vitreous humour in vitreoretinal surgery and is usually produced from octamethylcyclotetrasiloxane (D4). In Indonesia, both commercial PDMS and D4 are limited and expensive. Dichlorodimethylsilane (DCMS) can be an alternative to produce PDMS. DCMS is cheaper and easier to obtain than D4. However, more extra effort is needed in order to produce PDMS from DCMS. Therefore, this study aimed to produce PDMS from DCMS by varying the ratio of DCMS precursor to dichloromethane (DCM) solvent at ratios of 1:1 and 1:4 through the hydrolysis–condensation method under neutral conditions. The PDMS produced had medium- (2.06 Pa·s) and high viscosity (3.59 Pa·s), with densities ranging from 0.96 to 0.99 g/mL. The refractive index was 1.4034–1.4036 and surface tension was 21 × 10⁻³ N/m, while they were able to transmit ~100% visible light, which were similar values to the commercial PDMS characteristics. PDMS samples were characterized using IR and NMR spectroscopy, which confirmed they were of PDMS type. The most optimum DCMS:DCM ratio was 1:1 due to the medium-viscosity PDMS type that could be produced. The in vitro HET–CAM toxicity test showed that samples were non-irritant, similar to PDMS produced from D4. PDMS from DCMS was non-toxic and ready to be used as a vitreous humuor substitution. Full article

The characterization of intravitreal dosage forms with regard to their behavior in vivo is usually explored in preclinical development through animal studies. In vitro vitreous substitutes (VS) to simulate the vitreous body for preclinical investigations have so far been insufficiently studied. To determine a distribution or concentration in the mostly gel-like VS, extraction of the gels is required in many cases. This destroys the gels, which makes a continuous investigation of the distribution impossible. In this work, the distribution of a contrast agent in hyaluronic acid agar gels and polyacrylamide gels was studied by magnetic resonance imaging and compared with the distribution in ex vivo porcine vitreous. The porcine vitreous served as a surrogate for human vitreous since both are similar in their physicochemical properties. It was shown that both gels do not completely represent the porcine vitreous body, but the distribution in the polyacrylamide gel is similar to that in the porcine vitreous body. In contrast, the distribution throughout the hyaluronic acid agar gel is much faster. It was also shown that anatomical features such as the lens and the interfacial tension to the anterior eye chamber could have an influence on the distribution that is difficult to reproduce using in vitro VS. However, with the presented method, new in vitro VS can be investigated continuously without destruction in the future, and thus their suitability as a substitute for the human vitreous can be verified. Full article

The vitreous humour is a gel-like structure that composes the majority of each eye. It functions to provide passage of light, be a viscoelastic dampener, and hold the retina in place. Vitreous liquefaction causes retinal detachment and retinal tears requiring pars plana vitrectomy for vitreous substitution. An ideal vitreous substitute should display similar mechanical, chemical, and rheological properties to the natural vitreous. Currently used vitreous substitutes such as silicone oil, perfluorocarbon liquids, and gases cannot be used long-term due to adverse effects such as poor retention time, cytotoxicity, and cataract formation. Long-term, experimental vitreous substitutes composed of natural, modified and synthetic polymers are currently being studied. This review discusses current long- and short-term vitreous substitutes and the disadvantages of these that have highlighted the need for an ideal vitreous substitute. The review subsequently focuses specifically on currently used polysaccharide- and synthetic polymer-based vitreous substitutes, which may be modified or functionalised, or employed as the derivative, and discusses experimental vitreous substitutes in these classes. The advantages and challenges associated with the use of polymeric substitutes are discussed. Innovative approaches to vitreous substitution, namely a novel foldable capsular vitreous body, are presented, as well as future perspectives related to the advancement of this field. Full article

Vitreous substitutes are indispensable tools in vitreoretinal surgery. The two crucial functions of these substitutes are their ability to displace intravitreal fluid from the retinal surface and to allow the retina to adhere to the retinal pigment epithelium. Today, vitreoretinal surgeons can choose among a plethora of vitreous tamponades, and the tamponade of choice might be difficult to determine in the ever-expanding range of possibilities for a favorable outcome. The currently available vitreous substitutes have disadvantages that need to be addressed to improve the surgical outcome achievable today. Herein, the fundamental physical and chemical proprieties of all vitreous substitutes are reported, and their use and clinical applications are described alongside some surgical techniques of intra-operative manipulation. The major upcoming developments in vitreous substitutes are extensively discussed, keeping a translational perspective throughout. Conclusions on future perspectives are derived through an in-depth analysis of what is lacking today in terms of desired outcomes and biomaterials technology. Full article

An adaptation of the laser floating zone technique is used to modify the surface properties of ceramics with interest for biomedical applications. This new method is based upon the surface remelting of ceramic rods by using laser radiation, and its versatility is demonstrated in the surface structuring of two different eutectic composites with potential application as bone substitutes. Firstly, directionally eutectic rods of wollastonite (W)–tricalcium phosphate (TCP) and magnesium oxide (MgO)–magnesium stabilized zirconia (MgSZ) were grown by the laser floating zone technique. In the case of W-TCP eutectics, materials with crystalline, glass–ceramic, or vitreous microstructure could be obtained as the growth rate was increased. In the other case, a material made up of magnesium oxide and magnesium stabilized zirconia phases arranged in fibrillar or lamellar geometry was obtained. At higher solidification rates, the rupture of the growth front gave rise to the organization of the phases in the form of colonies or cells. The laser zone remelting technique was used to remove defects and to refine the microstructure of the directionally solidified eutectic surfaces as well as to cover MgO–MgSZ rods with W–TCP glass in the eutectic composition. The study provides a promising technique that can tailor the surface properties and functionality of bone repair materials. The products’ properties and challenges in preparation procedures are discussed. Full article

Advances in vitreoretinal surgery provide greater safety, efficacy, and reliability in the management of the several vitreoretinal diseases that benefit from surgical treatment. The advances are divided into the following topics: scleral buckling using chandelier illumination guided by non-contact visualization systems; sclerotomy/valved trocar diameters; posterior vitrectomy systems and ergonomic vitrectomy probes; chromovitrectomy; vitreous substitutes; intraoperative visualization systems including three-dimensional technology, systems for intraoperative optical coherence tomography, new instrumentation in vitreoretinal surgery, anti-VEGF injection before vitrectomy and in eyes with proliferative diabetic retinopathy, and new surgical techniques; endoscopic surgery; the management of subretinal hemorrhages; gene therapy; alternative techniques for refractory macular hole; perspectives for stem cell therapy and the prevention of proliferative vitreoretinopathy; and, finally, the Port Delivery System. The main objective of this review is to update the reader on the latest changes in vitreoretinal surgery and to provide an understanding of how each has impacted the improvement of surgical outcomes. Full article

Ophthalmology is the branch of medicine that deals with diseases of the eye, the organ responsible for vision, and its attachments. Biomaterials can be made with different types of materials and can replace or improve a function or an organ, specifically the eye in the case of ophthalmic biomaterials. Biomaterials are substances that interact with biological systems for a medical purpose, either as a therapeutic (treat, augment, repair, or replace a tissue function of the body) or a diagnostic agent, and have continued to improve over the years, leading to the creation of new biomaterials. With the arrival of new generations, biomaterials have succeeded in reducing complications and toxicity and improving biocompatibilities associated with older generations. With the aging population, eye problems are becoming more prevalent, and biomaterials have helped in recent years to improve or restore vision, improving the quality of life of many patients. This review focuses on the most clinically used ophthalmic biomaterials, including contact lenses, intraocular lenses, artificial tears, inlays and vitreous replacements. Tissue engineering is presented as a new tool that is able to be treat several ophthalmologic disorders. Full article

Phosphate and tellurite glasses can be used in optics, optoelectronics, magneto-optics, and nuclear and medical fields. Two series of phosphate-tellurite glasses, (50-x)ZnO-10Al₂O₃-40P₂O₅-xTeO₂ and (40-x)Li₂O-10Al₂O₃-5TiO₂-45P₂O₅-xTeO₂ (x = 5, 10), were synthesized by a non-conventional wet-route, and the mechanical properties as key performance measures for their application in optoelectronics were investigated. X-ray Diffraction (XRD) measurements revealed the vitreous nature of the investigated materials. Instrumented indentation tests allowed the calculation of hardness (H) and Young’s modulus (E) using the Oliver and Pharr model. The influence of increasing the TeO₂ content, as well as the substitution of ZnO by Li₂O-TiO₂, on the variation of hardness, Young’s modulus, penetration depth (PD), and fracture toughness (FT) was evaluated in both series. As a general trend, there is a decrease in the hardness and Young’s modulus with increasing penetration depth. The addition of Li₂O and TiO₂ instead of ZnO leads to improved hardness and elastic modulus values. Regarding the H/E ratio, it was found that the samples with lower TeO₂ content should be significantly more crack-resistant compared to the higher TeO₂ content samples. The H³/E² ratio, being lower than 0.01, revealed a poor resistance of these glasses to plastic deformation. At the same time, a decrease of the fracture toughness with increasing TeO₂ content was noticed for each glass series. Based on dilatometry measurements, the thermal expansion coefficient as well as the characteristic temperatures of the glasses were measured. Field Emission Scanning Electron Microscopy-Energy Dispersive X-ray analysis (FESEM-EDX) revealed a uniform distribution of the elements in the bulk samples. The mechanical properties of these vitreous materials are important in relation to their application as magneto-optical Faraday rotators in laser cavities. Full article

Polydimethylsiloxane (PDMS) is one of the most superior materials and has been used as a substitute for vitreous humor in the human eye. In previous research, we have succeeded in producing PDMS with low and medium viscosity using octamethylcyclotetrasiloxane (D4) monomer with a low grade of 96%. Both have good physical properties and are comparable to commercial product PDMS and PDMS synthesized using D4 monomer with a high grade of 98%. An improvement of the synthesis process is needed to ensure that PDMS synthesized from a low-grade D4 monomer under specific synthesis conditions can repeatedly produce high-quality PDMS. Apart from good physical properties, the PDMS as a substitute for vitreous humor must also be safe and not cause other disturbances to the eyes. Here, we reported the process of synthesizing and characterizing the physical properties of low- and medium-viscosity PDMS using a low-grade D4 monomer. We also reported for the first time the in vitro toxicity test using the Hen’s Egg Test Chorioallantoic Membrane (HET-CAM) test method. We have succeeded in obtaining PDMS with viscosities of 1.15 Pa.s, 1.17 Pa.s, and 1.81 Pa.s. All samples have good physical properties such as refractive index, surface tension, and functional groups that are similar to commercial PDMS. The HET-CAM test results showed that all samples did not show signs of irritation indicating that samples were non-toxic. From the results of this study, it can be concluded that PDMS synthesized from a low-grade D4 monomer under specific synthesis conditions by the ROP method is very safe and has the potential to be developed as a substitute for vitreous humor in human eyes. Full article