Search Results (239)

Accurate monitoring of leakage in urban water supply pipelines is crucial for ensuring the safety of residential water usage. This study proposes a robust physical indicator for identifying leaks in urban water pipelines, grounded in the physical background of leakage noise sources. An integral form of the leakage source noise power spectral density is established, and a rigorous theoretical analysis leads to the development of an effective physical indicator. This indicator addresses the limitation of existing leakage detection methods that overly rely on data-driven features. Experiments were conducted to validate the effectiveness and robustness of the proposed indicator. The results show that the leakage detection models trained with physical features achieved recognition accuracies of 99.89% for Support Vector Machine (SVM) and 99.97% for eXtreme Gradient Boosting (XGBoost) in the experiments. In the field test conducted on an in-service water supply pipeline with a total length of 701 m, the recognition accuracies for SVM and XGBoost were 97.92% and 99.31%, respectively. Full article

Notoginsenoside Rb1 (Rb1), a bioactive saponin from Panax notoginseng, exerts cardio-cerebrovascular protective, anti-inflammatory, antioxidant, and glucose homeostasis-regulating effects. However, its oral bioavailability is limited by gastric degradation and poor intestinal permeability. This study presents a food-grade bigel system for encapsulating Rb1 to enhance its stability and controlled-release performance. Oleogels were structured using monoglycerides (8%, w/w) in soybean oil. Rb1-loaded binary hydrogels (gellan gum/xanthan gum, 12:1 w/w) were emulsified in 10% Tween-80 (w/w). Bigels were formulated at varying hydrogel-to-oleogel ratios, and a ratio of 4:6 was identified as optimal. Stress-sweep rheological analysis revealed a dense gel structure with a peak storage modulus (G′) of 290.64 Pa—the highest among all tested ratios—indicating superior structural integrity. Confocal microscopy confirmed homogeneous encapsulation of Rb1 within the continuous hydrogel phase, effectively preventing payload leakage. Differential scanning calorimetry (DSC) analysis detected a distinct endothermic transition at 55 °C (ΔH = 6.25 J/g), signifying energy absorption that enables thermal buffering during food processing. The system achieved an encapsulation efficiency of 99.91% and retains both water and oil retention. Effective acid protection and colon-targeted delivery were observed in the digestion test. Effective acid protection and colon-targeted delivery were observed in the digestion test. Less than 5% of Rb1 was released in the gastric phase, and over 90% sustained intestinal release occurred at 4 h. The optimized bigel effectively protected Rb1 from gastric degradation and enabled sustained intestinal release. Its food-grade composition, thermal stability, and tunable rheology offer significant potential for use in functional foods and nutraceuticals. Full article

Periodic visual inspections are currently conducted to maintain the condition of railway bridges. These inspections rely on direct visual assessments by human inspectors, often requiring specialized equipment such as aerial ladders. However, this method is not only time-consuming and costly but also involves significant safety risks. Therefore, there is a growing need for a more efficient and reliable alternative to traditional visual inspections of railway bridges. In this study, we evaluated and compared the performance of damage detection using U-Net-based deep learning models on images captured by unmanned aerial vehicles (UAVs). The target damage types include cracks, concrete spalling and delamination, water leakage, exposed reinforcement, and paint peeling. To enable multi-class segmentation, the U-Net model was trained using three different loss functions: Cross-Entropy Loss, Focal Loss, and Intersection over Union (IoU) Loss. We compared these methods to determine their ability to distinguish actual structural damage from environmental factors and surface contamination, particularly under real-world site conditions. The results showed that the U-Net model trained with IoU Loss outperformed the others in terms of detection accuracy. When applied to field inspection scenarios, this approach demonstrates strong potential for objective and precise damage detection. Furthermore, the use of UAVs in the inspection process is expected to significantly reduce both time and cost in railway infrastructure maintenance. Future research will focus on extending the detection capabilities to additional damage types such as efflorescence and corrosion, aiming to ultimately replace manual visual inspections of railway bridge surfaces with deep-learning-based methods. Full article

The aging water distribution system in the United States, constructed mainly during the 1970s with some pipes dating back 125 years, is experiencing significant deterioration leading to substantial water losses. Along with the potential for water loss savings, improvements in the distribution system by using leak detection technologies can create net energy and cost savings. In this work, a new framework has been presented to calculate the economic level of leakage within water supply and distribution systems for two primary leak detection technologies (acoustic vs. satellite). In this work, a new framework is presented to calculate the economic level of leakage (ELL) within water supply and distribution systems to support smart infrastructure in smart cities. A case study focused using water audit data from Atlanta, Georgia, compared the costs of two leak mitigation technologies: conventional acoustic leak detection and artificial intelligence–assisted satellite leak detection technology, which employs machine learning algorithms to identify potential leak signatures from satellite imagery. The ELL results revealed that conducting one survey would be optimum for an acoustic survey, whereas the method suggested that it would be expensive to utilize satellite-based leak detection technology. However, results for cumulative financial analysis over a 3-year period for both technologies revealed both to be economically favorable with conventional acoustic leak detection technology generating higher net economic benefits of USD 2.4 million, surpassing satellite detection by 50%. A broader national analysis was conducted to explore the potential benefits of US water infrastructure mirroring the exemplary conditions of Germany and The Netherlands. Achieving similar infrastructure leakage index (ILI) values could result in annual cost savings of $4–$4.8 billion and primary energy savings of 1.6–1.9 TWh. These results demonstrate the value of combining economic modeling with advanced leak detection technologies to support sustainable, cost-efficient water infrastructure strategies in urban environments, contributing to more sustainable smart living outcomes. Full article

Leakages in water distribution networks pose a formidable challenge, often leading to substantial water wastage and escalating operational costs. Traditional methods for leak detection often fall short, particularly when dealing with complex or subtle data patterns. To address this, a comprehensive comparison of fourteen machine learning algorithms was conducted, with evaluation based on key performance metrics such as multi-class classification metrics, micro and macro averages, accuracy, precision, recall, and F1-score. The data, collected from an experimental site under leak, major leak, and no-leak scenarios, was used to perform multi-class classification. The results highlight the superiority of models such as Random Forest, K-Nearest Neighbours, and Decision Tree in detecting leaks with high accuracy and robustness. Multiple models effectively captured the nuances in the data and accurately predicted the presence of a leak, burst, or no leak, thus automating leak detection and contributing to water conservation efforts. This research demonstrates the practical benefits of applying machine learning models in water distribution systems, offering scalable solutions for real-time leak detection. Furthermore, it emphasises the role of machine learning in modernising infrastructure management, reducing water losses, and promoting the sustainability of water resources, while laying the groundwork for future advancements in predictive maintenance and resilience of water infrastructure. Full article

Termites pose significant threats to the structural integrity of embankments due to their nesting and tunneling behavior, which leads to internal voids, water leakage, or even dam failure. This review systematically classifies and evaluates current termite detection techniques in the context of embankment maintenance, focusing on physical sensing technologies and biological characteristic-based methods. Physical sensing methods enable non-invasive localization of subsurface anomalies, including ground-penetrating radar, acoustic detection, and electrical resistivity imaging. Biological characteristic-based methods, such as electronic noses, sniffer dogs, visual inspection, intelligent monitoring, and UAV-based image analysis, are capable of detecting volatile compounds and surface activity signs associated with termites. The review summarizes key principles, application scenarios, advantages, and limitations of each technique. It also highlights integrated multi-sensor frameworks and artificial intelligence algorithms as emerging solutions to enhance detection accuracy, adaptability, and automation. The findings suggest that future termite detection in embankments will rely on interdisciplinary integration and intelligent monitoring systems to support early warning, rapid response, and long-term structural resilience. This work provides a scientific foundation and practical reference for advancing termite management and embankment safety strategies. Full article

Traditional manual inspection methods for tunnel lining leakage are subjective and inefficient, while existing models lack sufficient recognition accuracy in complex scenarios. An intelligent leakage identification model adaptable to complex backgrounds is therefore needed. To address these issues, a Vision Transformer (ViT) was integrated into the UNet architecture, forming an SE-TransUNet model by incorporating SE-Block modules at skip connections between the encoder-decoder and the ViT output. Using a hybrid leakage dataset partitioned by k-fold cross-validation, the roles of SE-Block and ViT modules were examined through ablation experiments, and the model’s attention mechanism for leakage features was analyzed via Score-CAM heatmaps. Results indicate: (1) SE-TransUNet achieved mean values of 0.8318 (IoU), 0.8304 (Dice), 0.9394 (Recall), 0.8480 (Precision), 0.9733 (AUC), 0.8562 (MCC), 0.9218 (F1-score), and 6.53 (FPS) on the hybrid dataset, demonstrating robust generalization in scenarios with dent shadows, stain interference, and faint leakage traces. (2) Ablation experiments confirmed both modules’ necessity: The baseline model’s IoU exceeded the variant without the SE module by 4.50% and the variant without both the SE and ViT modules by 7.04%. (3) Score-CAM heatmaps showed the SE module broadened the model’s attention coverage of leakage areas, enhanced feature continuity, and improved anti-interference capability in complex environments. This research may provide a reference for related fields. Full article

Underground cast-in-place pipes (CIPP, Diameter of 2’–5’) are used to transport water for the Phoenix, AZ area. These pipes have developed leaks due to their age and changes in the environment, resulting in a significant waste of water. Currently, leaks can only be identified when water pools above ground occur and are then manually confirmed through the inside of the pipe, requiring the shutdown of the water system. However, many leaks may not develop a puddle of water, making them even harder to identify. The primary objective of this research was to develop an inspection method utilizing drone-based infrared imagery to remotely and non-invasively sense thermal signatures of abnormal soil moisture underneath urban surface treatments caused by the leakage of water pipelines during the regular operation of water transportation. During the field tests, five known leak sites were evaluated using an intensive experimental procedure that involved conducting multiple flights at each test site and a stringent filtration process for the measured temperature data. A detectable thermal signal was observed at four of the five known leak sites, and these abnormal thermal signals directly overlapped with the location of the known leaks provided by the utility company. A strong correlation between ground temperature and shading before sunset was observed in the temperature data collected at night. Thus, a shadow and solar energy model was implemented to estimate the position of shadows and energy flux at given times based on the elevation of the surrounding structures. Data fusion between the metrics of shadow time, solar energy, and the temperature profile was utilized to filter the existing points of interest further. When shadows and solar energy were considered, the final detection rate of drone-based infrared imaging was determined to be 60%. Full article

Leak management in water distribution networks (WDNs) is essential for minimising water loss, improving operational efficiency, and supporting sustainable water management. However, effectively identifying, preventing, and locating leaks remains a major challenge owing to the ageing infrastructure, pressure variations, and limited monitoring capabilities. Leakage management generally involves three approaches: leakage assessment, detection, and prevention. Traditional methods offer useful tools but often face limitations in scalability, cost, false alarm rates, and real-time application. Recently, artificial intelligence (AI) and machine learning (ML) have shown growing potential to address these challenges. Deep Reinforcement Learning (DRL) has emerged as a promising technique that combines the ability of Deep Learning (DL) to process complex data with reinforcement learning (RL) decision-making capabilities. DRL has been applied in WDNs for tasks such as pump scheduling, pressure control, and valve optimisation. However, their roles in leakage management are still evolving. To the best of our knowledge, no review to date has specifically focused on DRL for leakage management in WDNs. Therefore, this review aims to fill this gap and examines current leakage management methods, highlights the current role of DRL and potential contributions in the water sector, specifically water distribution networks, identifies existing research gaps, and outlines future directions for developing DRL-based models that specifically target leak detection and prevention. Full article

This study presents a comprehensive treatment system for addressing leakage challenges in underground structure construction within complex karst terrains, demonstrated through the case of Baiyun Station in Guangzhou. Integrating advanced geological investigation, dynamic grouting techniques, and adaptive structural remediation strategies, this methodology effectively mitigates water inflow risks in structurally heterogeneous karst environments. Key innovations include the “one-trench two-drilling” exploration-grouting system for karst cave detection and filling, a multi-stage emergency water-gushing control protocol combining cofferdam sealing and dual-fluid grouting, and a zoned epoxy resin injection scheme for structural fissure remediation. Implementation at Baiyun Station achieved quantifiable outcomes: karst cave filling rates increased from 35.98% to 82.6%, foundation pit horizontal displacements reduced by 67–68%, and structural seepage repair rates reached 96.4%. The treatment system reduced construction costs by CNY 12 million and shortened schedules by 45 days through optimized pile formation efficiency (98% qualification rate) and minimized rework. While demonstrating superior performance in sealing > 0.2 mm fissures, limitations persist in addressing sub-micron fractures and ensuring long-term epoxy resin durability. This research establishes a replicable framework for underground engineering in karst regions, emphasizing real-time monitoring, multi-technology synergy, and environmental sustainability. Full article

The European Union’s 2050 targets for decarbonization and electrification are promoting the widespread integration of heat pumps for space heating, cooling, and domestic hot water in buildings. However, their energy and environmental performance can be significantly compromised by soft faults, such as refrigerant leakage or heat exchanger fouling, which may reduce system efficiency by up to 25%, even with maintenance intervals every two years. As a result, the implementation of self-fault detection, diagnosis, and evaluation (FDDE) tools based on operational data has become increasingly important. The complexity and added value of these tools grow as they progress from simple fault detection to quantitative fault evaluation, enabling more accurate and timely maintenance strategies. Direct fault measurements are often unfeasible due to spatial, economic, or intrusiveness constraints, thus requiring indirect methods based on low-cost and accessible measurements. In such cases, overlapping fault symptoms may create diagnostic ambiguities. Moreover, the accuracy of FDDE approaches depends on the type and number of sensors deployed, which must be balanced against cost considerations. This paper provides a comprehensive review of current FDDE methodologies for heat pumps, drawing insights from the academic literature, patent databases, and commercial products. Finally, the role of artificial intelligence in enhancing fault evaluation capabilities is discussed, along with emerging challenges and future research directions. Full article

In recent years, China has been promoting aquaculture, but extensive water pollution caused by production activities and climate changes has resulted in losses exceeding 4.6 × 10⁷ kg of aquatic products. Widespread water pollution from production activities is a key issue that needs to be addressed in the aquaculture industry. Therefore, dynamic monitoring of water quality and fish-specific solutions are critical to the growth of fry. Here, a low-cost, small, and real-time monitorable bionic robotic fish based on YOLO-PWSL (PConv, Wise-ShapeIoU, and LGFB) is proposed to achieve intelligent control of aquaculture. The bionic robotic fish incorporates a caudal fin for propulsion and adaptive buoyancy control for precise depth regulation. It is equipped with various types of sensors and wireless transmission equipment, which enables managers to monitor water parameters in real time. It is also equipped with YOLO-PWSL, an improved underwater fish identification model based on YOLOv5s. YOLO-PWSL integrates three key enhancements. In fact, we designed a multilevel attention fusion block (LGFB) that enhances perception in complex scenarios, to optimize the accuracy of the detected frames, the Wise-ShapeIoU loss function was used, and in order to reduce the parameters and FLOPs of the model, a lightweight convolution method called PConv was introduced. The experimental results show that it exhibits excellent performance compared with the original model: the mAP@0.5 (mean average precision at the 0.5 IoU threshold) of the improved model reached 96.1%, the number of parameters and the amount of calculation were reduced by 1.8 M and 3.1 G, respectively, and the detected leakage was effectively reduced. In the future, the system will facilitate the monitoring of water quality and fish species and their behavior, thereby improving the efficiency of aquaculture. Full article

Water distribution is no arguably the most important factor in modern times, and water leak breaks are typically a consequence of failures in water distribution networks. But pipeline leakage breaks have become one of the most frequent consequences affecting the operation of water distribution networks (WDNs) and monitoring their health is often complicated. This paper proposes a leakage break diagnosis method based on an LSTM-FCN neural network model from high-frequency pressure data. Data preprocessing is used to avoid the influence of noise and information redundancy, and the LSTM module and the FCN module are used to extract and concatenate different leakage break features. The leakage break feature is sent to a dense classifier to obtain the predicted result. Two sample sets, steady state and water consumption, were obtained to verify the performance of the proposed leakage break diagnosis method. Three other models, LSTM, FCN, and ANN, were compared using the sample sets. The proposed LSTM-FCN model achieved an overall accuracy of 85% for leakage break detection, illustrating that the model could effectively learn the leakage break features in high-frequency time-series data and had a high accuracy for leakage break detection and leakage break degree prediction of new samples in WDNs. Meanwhile, the proposed method also had good adaptability to the variations in water consumption in actual WDNs. Full article

Lonicera caerulea is a wild fruit species with high edible and medicinal value. However, the molecular regulation and metabolic mechanisms of L. caerulea under salt stress are still unclear. Salt stress causes damage to the cell membrane of L. caerulea and induces changes in malondialdehyde content, relative electrolyte leakage, leaves’ stomatal opening, and the water loss rate. It also increases the activity of antioxidant enzymes and the content of soluble sugars. A comprehensive transcriptomic and metabolomic analysis of L. caerulea exposed to salt stress at four different (treatment) time intervals yielded a total of 99,574 unigenes and 1375 metabolites. Among these, 4081, 4042, and 4403 differentially expressed genes (DEGs) were identified in 12 transcriptomes, while 776, 832, and 793 differentially accumulated metabolites (DAMs) were detected in 12 metabolomes. The DEGs play important roles in several signaling pathways, including MAPK signaling, fatty acid metabolism, starch and sucrose metabolism, phenylpropanoid biosynthesis, and plant hormone signal transduction. KEGG pathway enrichment analysis revealed that these DEGs and DAMs are associated with flavonoid and lipid biosynthesis pathways. The combined transcriptomic and metabolomic analyses suggest that flavonoid and fatty acid compounds may be involved in regulating plant responses to salt stress. These findings will lay the foundation for the selection of L. caerulea germplasm resources and the expansion of its cultivation area. These research findings will lay the foundation for the cultivation of salt-tolerant new varieties of L. caerulea and their planting in saline–alkali soils. Full article

Urban water distribution systems face growing challenges from energy inefficiencies caused by hydraulic anomalies, such as pipe aging, bursts, demand variability, and suboptimal pump and valve operations. This review systematically evaluates current technologies for energy-efficient management of WDNs under such conditions, structured around both basic and applied technologies. Basic technologies include real-time monitoring, data acquisition, and hydraulic modeling with CFD simulation. Applied technologies focus on demand forecasting, pressure management for energy optimization, and leakage anomaly detection. Case studies demonstrate the practical value of these approaches. Despite recent advances, challenges persist in data interoperability, real-time optimization complexity, scalability, and forecasting uncertainty. Future research should emphasize adaptive AI algorithms, integration of digital twin platforms with control systems, hybrid optimization frameworks, and renewable energy recovery technologies. This review provides a comprehensive foundation for the development of intelligent, energy-efficient, and resilient urban water distribution systems through integrated, data-driven management strategies. Full article