The authors wish to make the following corrections to this manuscript [1]. During the publishing process, symbols that represented the absorption coefficient in Table 4 and thermal conductivity in Table 5 were changed such that they were inconsistent with the rest of the manuscript. Also, several of the entries in Table 6 were not presented with a bold typeface, although they should have been, as described in the caption of the table. The tables with the correct symbols and formatting are shown below. While the authors are not responsible for these errors, they regret any inconvenience or misunderstanding caused by them.
Table 4.
Measurements used to calculate the absorption coefficient for each virgin and melt component.
Table 5.
Full set of thermophysical properties used in the individual upper layer model and base layer model.
Table 6.
Thermal conductivity and density values for Final Full Carpet model. Modifications to property values from individual layer models are shown in bold.
Conflicts of Interest
The authors declare no conflicts of interest.
Reference
- McKinnon, M.B.; Stoliarov, S.I. Pyrolysis model development for a multilayer floor covering. Materials 2015, 8, 6117–6153. [Google Scholar] [CrossRef]
© 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons by Attribution (CC-BY) license (http://creativecommons.org/licenses/by/4.0/).